Contents

Hikvision DS-D6032FN-B Signage User's Manual PDF

1 of 32
1 of 32

Summary of Content for Hikvision DS-D6032FN-B Signage User's Manual PDF

FocSign Lite User Manual

FocSign Lite

User Manual

FocSign Lite User Manual

1

2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred to

as "Hikvision"), and it cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means,

without the prior written permission of Hikvision. Unless otherwise expressly stated herein, Hikvision does not make

any warranties, guarantees or representations, express or implied, regarding to the Manual, any information

contained herein.

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other

information hereinafter are for description and explanation only. The information contained in the Manual is subject

to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at

the Hikvision website (https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks Acknowledgement

and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners.

LEGAL DISCLAIMER

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS

HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION

MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR

OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR

INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON

BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH

THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION

SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES

RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;

HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE

FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR

USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING

WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER

PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF

CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR

UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

FocSign Lite User Manual

2

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party

responsible for compliance could void the users authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the interference at

his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and

comply therefore with the applicable harmonized European standards listed under the

EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of

as unsorted municipal waste in the European Union. For proper recycling, return this

product to your local supplier upon the purchase of equivalent new equipment, or

dispose of it at designated collection points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed

of as unsorted municipal waste in the European Union. See the product documentation

for specific battery information. The battery is marked with this symbol, which may

include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return

the battery to your supplier or to a designated collection point. For more information see:

www.recyclethis.info

Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

FocSign Lite User Manual

3

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol Description

Provides additional information to emphasize or supplement important points of the main text.

Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.

Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury.

FocSign Lite User Manual

4

TABLE OF CONTENTS Chapter 1 Product Introduction...................................................................................................................................................... 0

1.1 Introduction ...............................................................................................................................................................................0

1.2 Operation Flowchart ..................................................................................................................................................................0

Chapter 2 Registration and Login ................................................................................................................................................... 1

2.1 Registration ................................................................................................................................................................................1

2.2 Login ..........................................................................................................................................................................................1

Chapter 3 Terminal Management ................................................................................................................................................... 2

3.1 Add Terminal ..............................................................................................................................................................................2

3.1.1 Add Terminal on the Same Network Segment ................................................................................................................2

3.1.2 Add Terminal by IP Address .............................................................................................................................................4

3.1.3 Add Terminal by Serial No. ..............................................................................................................................................4

3.1.4 Edit/Delete Terminal .......................................................................................................................................................5

3.1.5 View Terminal Details .....................................................................................................................................................6

3.2 Terminal Operation ....................................................................................................................................................................6

3.2.1 Startup and Shutdown ....................................................................................................................................................6

3.2.2 Play Control .....................................................................................................................................................................6

3.2.3 Adjust Brightness ............................................................................................................................................................7

3.2.4 Adjust Volume .................................................................................................................................................................7

3.3 Terminal Configuration ..............................................................................................................................................................7

3.3.1 Modify Terminal Password ..............................................................................................................................................7

3.3.2 Configure Time Zone.......................................................................................................................................................8

3.3.3 Configure Logo ................................................................................................................................................................8

3.3.4 Configure IP Channel Linkage ..........................................................................................................................................8

3.4 Terminal Maintenance ...............................................................................................................................................................9

3.4.1 Upgrade...........................................................................................................................................................................9

3.4.2 Security ...........................................................................................................................................................................9

3.4.3 Time Synchronization .....................................................................................................................................................9

3.4.4 Modify Network Parameters .........................................................................................................................................10

3.4.5 Reset Password .............................................................................................................................................................10

3.4.6 Restore Defaults ............................................................................................................................................................11

Chapter 4 Program Management ................................................................................................................................................. 12

4.1 Create Program ........................................................................................................................................................................12

4.1.1 Configure Program Basic Settings .................................................................................................................................12

4.1.2 Manage Page ................................................................................................................................................................13

4.1.3 Add Window .................................................................................................................................................................14

4.1.4 Edit Page .......................................................................................................................................................................19

4.2 Preview Program ......................................................................................................................................................................19

4.3 Schedule Program ....................................................................................................................................................................20

4.3.1 Create Schedule ............................................................................................................................................................20

4.3.2 Create Loop Schedule ...................................................................................................................................................20

4.4 Release .....................................................................................................................................................................................21

FocSign Lite User Manual

5

4.4.1 Release Program ...........................................................................................................................................................21

4.4.2 Cut-in Release ...............................................................................................................................................................22

4.4.3 Release Default Video ...................................................................................................................................................23

4.4.4 Relevant Operations of Release ....................................................................................................................................24

FocSign Lite User Manual

Chapter 1 Product Introduction

1.1 Introduction FocSign Lite client (hereinafter referred to as the client) is used to create programs and release them to information release screen or digital signage (hereinafter they are referred to as the terminal). The client supports program creation, release management, broadcast schedule management, cut-in, terminal management, etc.

1.2 Operation Flowchart

Figure 1-1 Operation Flowchart

FocSign Lite User Manual

1

Chapter 2 Registration and Login

2.1 Registration

Purpose:

Registration is required for the first login.

Before you start:

Install the client on your computer.

Step 1 Run the client.

Step 2 Set the password and confirm it.

One client has only one user: admin.

Step 3 Click Register.

Step 4 Optionally, check Remember Password and Auto Login according to needs.

2.2 Login

Purpose:

Enter the password and click Login. You can manage and release program to the terminal after logging in.

Click on the home page to edit login password or enable/disable auto login.

FocSign Lite User Manual

2

Chapter 3 Terminal Management

3.1 Add Terminal

Purpose:

You can manage added terminals, including start up/shut down terminals, adjust terminal volume and brightness, etc.

You can add terminal via the following methods:

Add terminals from the Online Terminal bar if the client and the terminals are in the same

network segment.

Add terminals by IP address.

Add terminals by serial number.

3.1.1 Add Terminal on the Same Network Segment

Activate Terminal

Purpose:

You can activate the terminal via client.

Before you start:

Ensure the terminal is on and is in the same network segment with the client.

Step 1 Go to Terminal Management.

Step 2 Click on the lower-right corner.

Step 3 Select the terminals to activate.

Step 4 Click Activate.

FocSign Lite User Manual

3

Figure 3-1 Activate Terminal

Step 5 Set the terminal password and confirm password.

Step 6 Click OK.

Register Terminal

Purpose:

You can register activated terminal to the client.

Before you start:

Ensure the terminal and the client are in the same network segment.

Step 1 Go to Terminal Management.

Step 2 Click on the lower-right corner.

Step 3 Select the terminals to register.

Step 4 Click CMS Registration.

Figure 3-2 CMS Registration

FocSign Lite User Manual

4

Step 5 Set IP type, IP address, and server port.

Step 6 Enter terminal password.

Step 7 Click OK.

Step 8 Optionally, click Acquire Registration Status to view terminal registration status.

3.1.2 Add Terminal by IP Address

Step 1 Go to Terminal Management.

Step 2 Click Add Terminal.

Figure 3-2 Add Terminal

Step 3 Select Adding Mode as Add by IP.

Step 4 Enter Terminal IP Address and Port.

Step 5 Enter Terminal Name and Terminal Password.

Step 6 Click OK.

3.1.3 Add Terminal by Serial No.

Before you start

1. Enter information release software in your terminal.

2. Double click upper-right corner to obtain terminal serial No.

Step 1 Click Terminal Management.

FocSign Lite User Manual

5

Step 2 Click Add Terminal.

Step 3 Select Adding Mode.

Figure 3-3 Add Terminal by Serial No.

Step 4 Enter Terminal Name, Terminal Serial No. and Description.

Step 5 Click OK.

Step 6 Register the computer where FocSign Lite is installed.

1) Enter information release software in terminal.

2) Double click upper-right corner.

3) Enter the information of the computer and FocSign Lite in server configuration interface.

4) Click Save.

3.1.4 Edit/Delete Terminal

Purpose:

You can edit information of the added terminal or delete the added terminal.

Click of a terminal to edit its name, serial No. or description.

Check a terminal and click Delete Terminal to delete it.

Figure 3-4 Edit/Delete Terminal

FocSign Lite User Manual

6

3.1.5 View Terminal Details

Click of a terminal to view its information and current program image.

3.2 Terminal Operation

Purpose:

You can start up/shut down terminal, adjust terminal volume, and control program via terminal operation menu.

3.2.1 Startup and Shutdown

Purpose:

You can manually start up and shut down a terminal, and configure the startup/shutdown schedule for a terminal.

: Start up the selected terminal.

: Shut down the selected terminal.

: Reboot the selected terminal.

Scheduled Startup/Shutdown: Select a terminal, enable Scheduled Startup/Shutdown and click Settings to set startup/shutdown schedule. The terminal automatically starts up and shuts down according to the schedule.

3.2.2 Play Control

Purpose:

You can control program playback, cut-in, and default play for one or more terminals.

Play/Stop

A program is playing: Click Play to start playing program from the beginning. And click Stop to stop playing.

No program is playing: Click Play to start playing the previous program from the beginning.

Cut-in

The priority of a terminal is to play received cut-in programs. Click Stop to stop playing cut-in programs.

Default play

If you enable Default Play, terminal will start default play when no program or cut-in is playing.

FocSign Lite User Manual

7

3.2.3 Adjust Brightness

Purpose:

You can adjust the brightness for one or more terminals.

Auto-Brightness

Select Auto-Brightness radio and select backlight value. Terminal will automatically adjust screen backlight according to environment.

Backlight

Select Backlight radio and drag the slider to adjust brightness value.

3.2.4 Adjust Volume

Purpose:

You can adjust the volume for one or more terminals.

Output Volume

Drag the slider to adjust the terminal output volume.

Scheduled Volume

Select a terminal, enable Scheduled Volume and click Settings to set volume schedule. The terminal volume varies according to schedule.

3.3 Terminal Configuration

3.3.1 Modify Terminal Password

Purpose:

To increase terminal security, you are recommended to modify terminal password regularly.

Step 1 Go to Terminal Management.

Step 2 Select the desired terminal and click Remote Settings.

Step 3 Go to Terminal Operation > Password Settings.

Step 4 Enter Current Password and enter the same password in New Password and Confirm New Password.

We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

FocSign Lite User Manual

8

Step 5 Click Apply.

3.3.2 Configure Time Zone

Purpose:

Configure terminal time zone according to the actuality.

Step 1 Go to Terminal Management.

Step 2 Select the desired terminal and click Remote Settings.

Step 3 Go to Terminal Operation > Time Zone Settings.

Step 4 Select time zone.

Step 5 Click Apply.

3.3.3 Configure Logo

Purpose:

Enable/disable the startup logo of terminals.

Step 1 Go to Terminal Management.

Step 2 Select the desired terminal and click Remote Settings.

Step 3 Go to Terminal Operation > Logo Settings.

Step 4 Check/uncheck Enable Logo.

Step 5 Click Apply.

3.3.4 Configure IP Channel Linkage

Purpose:

Link the terminal with network cameras to receive information from network cameras.

Up to 4 general IP cameras can be added.

Step 1 Go to Terminal Management.

Step 2 Select the desired terminal and click Remote Settings.

Step 3 Go to Terminal Linkage > IP Channel Settings.

Step 4 Select a channel and click .

Step 5 Enter network camera parameters and click Apply to link to the network camera.

FocSign Lite User Manual

9

Step 6 Optionally, click / to link the network camera to the other channel.

3.4 Terminal Maintenance

3.4.1 Upgrade

Purpose:

You are recommended to upgrade the terminal with the help of professional technical support.

Before you start

Save the upgrade file in your computer local path.

Step 1 Go to Terminal Management.

Step 2 Click Upgrade.

Step 3 Click and select the upgrade file path.

Step 4 Click OK to start upgrade.

It takes 1 to 10 minutes to upgrade the terminal. Do not cut off power supply during upgrade. The

terminal will restart after upgrade.

3.4.2 Security

Purpose:

To increase security, you are recommended to turn off SADP after server configuration. Operate the function with the help of professional technical support.

Step 1 Go to Terminal Management.

Step 2 Select the desired terminal and click Remote Settings.

Step 3 Go to Security Settings.

Step 4 Check/uncheck Enable SADP as your desire.

Step 5 Click Apply.

3.4.3 Time Synchronization

Purpose:

Synchronize the terminal time.

Step 1 Go to Terminal Management.

FocSign Lite User Manual

10

Step 2 Select the desired terminal and click Remote Settings.

Step 3 Go to Sync Time Settings.

Step 4 You can customize the time or synchronize the time with your computer.

Click to set time as your desire.

Check Use Local Time to set terminal time as your computer time.

Step 5 Click Apply.

3.4.4 Modify Network Parameters

Before you start

Ensure the terminal and your computer are in the same network segment.

Step 1 Go to Terminal Management.

Step 2 Click on the lower-right corner to view online terminals.

Step 3 Select the desired terminal and click Edit Network Parameters.

Figure 3-5 Edit Network Parameters

Step 4 Edit network parameters.

Step 5 Enter Terminal Password and click Confirm.

3.4.5 Reset Password

Before you start

Ensure the terminal and your computer are in the same network segment.

Step 1 Go to Terminal Management.

FocSign Lite User Manual

11

Step 2 Click on the lower-right corner to view online terminals.

Step 3 Select the desired terminal and click Reset Password.

Figure 3-6 Reset Password

Step 4 Enter Password and Confirm Password.

Step 5 Click Confirm.

Step 6 Click Export to export terminal configuration file.

Step 7 Click Import to import a configuration file. You are recommended to import configuration file with the help of professional technical support.

3.4.6 Restore Defaults

Purpose:

If the terminal is abnormal, you can restore it to default settings.

Step 1 Go to Terminal Management.

Step 2 Click Restore of Terminal Default Parameters.

FocSign Lite User Manual

12

Chapter 4 Program Management

You can create and modify program, and release it to different terminals.

4.1 Create Program

Purpose:

Create and configure the program according to the terminal type. Customize the program layout. The layout is same to the final release effect.

Step 1 Go to Control Panel > Create Program.

Step 2 Configure program basic information.

Figure 4-1 Program Basic Settings

Step 3 Set page attributes in Area 1. For detailed steps, refer to 4.1.2 Manage Page.

Step 4 Select window type in Area 2. For detailed steps, refer to 4.1.3 Add Window.

Step 5 Edit page layout with the tools listed in Area 3. For detailed steps, refer to 4.1.4 Edit Page.

4.1.1 Configure Program Basic Settings

Purpose:

Configure the program name, type and canvas size.

Step 1 Go to Control Panel > Create Program.

FocSign Lite User Manual

13

Figure 4-2 Program Basic Settings

Step 2 Enter the information accordingly.

Program Name: Customized to specify the program.

Program Type: Choose the type according to the terminal type. Touchscreen program can realize touch-screen function only when its played on the touchscreen terminal.

Canvas Size: Choose the size according to terminal type. It supports to be customized.

4.1.2 Manage Page

Step 1 Edit Page Attributes.

Figure 4-3 Page Attributes

Play Duration:

When Play Mode is Custom, you can set the play duration accordingly. (Unit: s)

When Play Mode is Auto, you need to set the play times. If you enter N, the page plays N time(s).

FocSign Lite User Manual

14

When Play Mode is Loop Play, the page plays in a continuous loop.

Step 2 Optionally, click to add page.

Up to 32 pages can be added.

You can adjust the program order. Program will be played according to the page order.

4.1.3 Add Window

You can add picture, audio, video, documents, PDF, web pages, clocks, countdown, streaming media, etc. And you can create empty windows.

After configuring the page, click the window to add it to the page.

Table 4-1 Format Requirement

Window Type Format Requirement

Video ASF, AVI, MPG, 3GP, MOV, MKV, WMV, FLV, MP4

Picture BMP, JPG, PNG, GIF

Audio MP3, WAV, WMA

Document TXT, PDF

FocSign Lite User Manual

15

Figure 4-4 Window List

Add Empty Window

You can drag pictures, videos, and other materials into an empty window, or directly add a picture

window, a video window, etc.

Step 1 Click and click the page to create an empty window.

Step 2 Drag and scale the window or edit the attributes to set its position and size.

Step 3 Drag the material into the window.

Add Picture Window

Step 1 Select Multi-Media Library > Picture on the program editing interface.

FocSign Lite User Manual

16

Step 2 Click to select the picture to be added.

Step 3 Drag the picture to the canvas.

Step 4 Adjust the picture position and size by dragging and scaling, or by editing the attributes on the right.

Add Video Window

Up to 4 video windows can be added for one single page.

Step 1 Select Multi-Media Library > Video on the program editing interface.

Step 2 Click to select the video to be added.

Step 3 Drag the video to the canvas, and set the position and size.

Step 4 Set the Play Mode.

Material Time: Play the material for one entire time.

Custom: Play the material for the time you set.

Step 5 Optionally, check Close Auto to play the video in mute.

For multiple video windows added to one page, only one video can be played in non-mute mode. Check Close Auto for the other windows.

Add Audio Window

Only one audio window can be added for one single page.

Step 1 Select Multi-Media Library > Audio on the program editing interface.

Step 2 Click to select the audio to be added.

Step 3 Drag the audio to the canvas, and set the position and size.

Step 4 Set the Play Mode.

Material Time: Play the material for one entire time.

Custom: Play the material for the time you set.

FocSign Lite User Manual

17

Add PDF Window

Step 1 Select Multi-Media Library > TXT on the program editing interface.

Step 2 Click to select the PDF to be added.

Step 3 Drag the PDF to the canvas, and set the position and size.

Step 4 Set the play mode and duration.

Add TXT Window

Step 1 Select Multi-Media Library > TXT on the program editing interface.

Step 2 Click to select the TXT to be added.

Step 3 Drag the TXT to the canvas, and set the position and size.

Step 4 Set the font size, font color, background color.

Click and click the page to create an empty TXT window. You can edit the content in the window.

Add APP Window

Only 1 APP window can be added for one single page, and no other window can be added.

Step 1 Select Multi-Media Library > APP on the program editing interface.

Step 2 Click to select the app to be added.

Step 3 Drag the app to the canvas.

Add Clock Window

Only 1 clock window can be added for one single page.

Step 1 Select Control on the program editing interface.

Step 2 Click to the canvas, adjust the size, position and background picture.

Step 3 Set the clock format:

FocSign Lite User Manual

18

1) Click the clock icon to display the content settings.

2) Check the checkbox accordingly set clock format.

Add Countdown Window

Step 1 Select Control on the program editing interface.

Step 2 Click to the canvas, adjust the size, position and background picture.

Step 3 Set the stop time and unit.

Step 4 Set the countdown format, such as font, color, etc.

Add Stream Media Window

Up to 4 stream media window can be added for one single page.

Step 1 Select External Data > Stream Media on the program editing interface.

Step 2 Click , enter name and URL, and click Confirm.

Step 3 Drag the stream media to the canvas, adjust the size and position.

Step 4 Set play duration on the right.

Step 5 Optionally, check Close Audio to play it in mute.

Add IPC Material Window

Step 1 Select External Data > IPC Material on the program editing interface.

Step 2 Click , enter the parameters, and click Confirm.

Step 3 Drag the IPC material to the canvas, adjust the size and position.

Step 4 Set play duration on the right.

Step 5 Optionally, check Close Audio to play it in mute.

Add Web Window

Step 1 Select External Data > Web on the program editing interface.

Step 2 Click , enter name and URL, and click Confirm.

Step 3 Drag the IPC material to the canvas, adjust the size and position.

Step 4 Set play duration on the right.

FocSign Lite User Manual

19

Add Button Window

You can only add button window in touchscreen program.

Button window only takes effect on the touchscreen terminal.

Up to 16 button windows are supported to add to one page.

Step 1 Click and click the page to create a button window.

Step 2 Adjust the button size and position.

Step 3 Set window type:

Pop-up window: click the button to pop-up the window.

Normal: You need to set the connect method in the Event Type.

Step 4 Select event type and link:

New Pop-up Window: click the button to pop-up a new window.

New Page: click the button to open a new page.

4.1.4 Edit Page

Click the buttons to edit the program.

Figure 4-5 Function Bar

: Adjust the windows alignment: left, middle, and right.

: Adjust the window tops alignment: top alignment, middle alignment, and bottom alignment.

: Display the window on the real resolution.

:

Self-adaptive resolution.

Auto Adhesion

Once enabled, two windows connected when theyre near enough.

4.2 Preview Program

Click to preview the program after editing.

FocSign Lite User Manual

20

4.3 Schedule Program

Purpose:

You can make a program playback schedule according to your needs.

4.3.1 Create Schedule

Step 1 Go to Control Panel > Create Schedule.

Figure 4-6 Add Schedule

Step 2 Select Configuration Mode: Day, Week, Custom.

Custom mode supports to play the program on specific period. Up to 90-day custom schedule is supported.

Step 3 Select Time Interval.

Step 4 Select program in Program List, and drag in the schedule.

Step 5 Set the start time and end time.

Step 6 Click Release to enter the release interface.

4.3.2 Create Loop Schedule

Step 1 Go to Control Panel > Create Schedule.

Step 2 Set Configuration Mode as Loop.

Step 3 Drag the program into the play list.

Step 4 Click to add new list.

FocSign Lite User Manual

21

Up to 8 programs can be added to one play list.

Up to 8 loop play lists can be created.

Step 5 Play List 1 is no time-limited loop by default. Select time for the other loop play list.

No Time- Limited Loop: The programs are played by order.

Time- Limited Loop: Play the programs at specific period. The priority of Time- Limited Loop is higher than the No Time- Limited Loop.

Step 6 Click Release to enter the release interface.

4.4 Release

Purpose:

Release the programs to information release screen.

4.4.1 Release Program

Before you start:

User has finished the program creating process.

Step 1 Open Release interface.

Click Quick Release on the program editing interface;

Click Release on the creating schedule interface;

Click on the play list interface.

Step 2 Enter Task Name.

FocSign Lite User Manual

22

Figure 4-7 Release Task

Step 3 Select Applicable Terminal.

Step 4 Select Effective Time. If you dont the select time, the program will be release instantly.

Step 5 Click Release.

4.4.2 Cut-in Release

Purpose:

The program or text will be played once the terminal received cut-in release order.

Cut-in Program Release

Step 1 Create Cut-in Release task.

Click Cut-in Program on the program editing interface;

Click on the play list interface.

Step 2 Enter the release task name.

FocSign Lite User Manual

23

Figure 4-8 Cut-in Release Task

Step 3 Select Applicable Terminal.

Step 4 Select Time Duration.

Step 5 Click Release.

Cut-in Text Message

Step 1 Click Cut-in Text Message on the control panel.

Step 2 Enter the task name.

Step 3 Select Applicable Terminal.

Step 4 Click to Add Content, fill the text messages. Up to 5 messages can be added.

Step 5 Select Time.

Step 6 Set the window position, font, background, display mode, etc.

Step 7 Optionally, click Preview to check the message play effect.

Step 8 Click Release.

4.4.3 Release Default Video

Purpose:

You can set program as default video and release it to the terminal. The terminal will play default video automatically if there is no program or cut-in.

FocSign Lite User Manual

24

Step 1 Select terminals in Terminal Management.

Step 2 Enable Default Play Enable.

Step 3 Select terminals Control Panel, then click .

Step 4 Enter task name.

Step 5 Select terminals.

Step 6 Check Effective Time, then click to set the effective time.

The program will become effective immediately after release if you do not check Effective Time.

Step 7 Click Release.

4.4.4 Relevant Operations of Release

Purpose:

Refer to the following descriptions for relevant operations of release in Release Management.

: View the release details of program or schedule.

: Cancel release.

: Delete program release/schedule release.

Cancel release: Click Cancel Release to cancel releasing program in Release Progress interface.

Re-release: Click Re-release to re-release cancelled task in Release Progress interface.

Manualsnet FAQs

If you want to find out how the DS-D6032FN-B Hikvision works, you can view and download the Hikvision DS-D6032FN-B Signage User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Hikvision DS-D6032FN-B as well as other Hikvision manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Hikvision DS-D6032FN-B. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Hikvision DS-D6032FN-B Signage User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Hikvision DS-D6032FN-B Signage User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Hikvision DS-D6032FN-B Signage User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Hikvision DS-D6032FN-B Signage User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikvision DS-D6032FN-B Signage User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.