Page 3
Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements...
Page 4
Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results...
Page 5
TABLE OF CONTENTS Chapter 1 Product Introduction... 0
Page 6
4... 4... 2 Cut-in Release ... 22
Page 7
1... 1 Introduction FocSign Lite client (hereinafter referred to as the client) is used to create programs and release them to information release screen or digital signage (hereinafter they are referred to as the terminal)... The client supports program creation, release management, broadcast schedule management, cut-in, terminal management, etc...
Page 8
Enter the password and click Login... You can manage and release program to the terminal after logging in...
Page 9
You can manage added terminals, including start up/shut down terminals, adjust terminal volume and brightness, etc...
Page 10
Ensure the terminal and the client are in the same network segment...
Page 11
Step 8 Optionally, click Acquire Registration Status to view terminal registration status...
Page 12
3) Enter the information of the computer and FocSign Lite in server configuration interface...
Page 13
Scheduled Startup/Shutdown: Select a terminal, enable Scheduled Startup/Shutdown and click Settings to set startup/shutdown schedule... The terminal automatically starts up and shuts down according to the schedule...
Page 14
We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters... ) in order to increase the security of your product... And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product...
Page 15
Step 5 Enter network camera parameters and click Apply to link to the network camera...
Page 16
To increase security, you are recommended to turn off SADP after server configuration... Operate the function with the help of professional technical support...
Page 17
Step 4 You can customize the time or synchronize the time with your computer...
Page 18
Step 7 Click Import to import a configuration file... You are recommended to import configuration file with the help of professional technical support...
Page 19
Create and configure the program according to the terminal type... Customize the program layout... The layout is same to the final release effect...
Page 20
Program Type: Choose the type according to the terminal type... Touchscreen program can realize touch-screen function only when its played on the touchscreen terminal...
Page 21
You can add picture, audio, video, documents, PDF, web pages, clocks, countdown, streaming media, etc... And you can create empty windows...
Page 22
You can drag pictures, videos, and other materials into an empty window, or directly add a picture
Page 23
For multiple video windows added to one page, only one video can be played in non-mute mode... Check Close Auto for the other windows...
Page 24
Click and click the page to create an empty TXT window... You can edit the content in the window...
Page 25
Step 1 Select External Data > Stream Media on the program editing interface...
Page 26
: Adjust the window tops alignment: top alignment, middle alignment, and bottom alignment...
Page 27
Custom mode supports to play the program on specific period... Up to 90-day custom schedule is supported...
Page 28
Time- Limited Loop: Play the programs at specific period... The priority of Time- Limited Loop is higher than the No Time- Limited Loop...
Page 29
Step 4 Select Effective Time... If you dont the select time, the program will be release instantly...
Page 30
You can set program as default video and release it to the terminal... The terminal will play default video automatically if there is no program or cut-in...
Page 31
Cancel release: Click Cancel Release to cancel releasing program in Release Progress interface...