Contents

Hikvision DS-TP50-16E Server User's Manual PDF

1 of 65
1 of 65

Summary of Content for Hikvision DS-TP50-16E Server User's Manual PDF

Terminal Server

User Manual

Terminal Server User Manual

1

2019 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred to as

Hikvision), and it cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without

the prior written permission of Hikvision. Unless otherwise expressly stated herein, Hikvision does not make any

warranties, guarantees or representations, express or implied, regarding to the Manual, any information contained

herein.

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information

hereinafter are for description and explanation only. The information contained in the Manual is subject to change,

without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision

website (https://www.hikvision.com/en/).

Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks Acknowledgement

and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners.

LEGAL DISCLAIMER

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH

ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS.

HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR

OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR

INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED

ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN

CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION

SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES

RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;

HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY

RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE

RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD

PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA

PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES,

INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY

NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

Terminal Server User Manual

2

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party responsible

for compliance could void the users authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and

comply therefore with the applicable harmonized European standards listed under the

EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as

unsorted municipal waste in the European Union. For proper recycling, return this product

to your local supplier upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed

of as unsorted municipal waste in the European Union. See the product documentation

for specific battery information. The battery is marked with this symbol, which may include

lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the

battery to your supplier or to a designated collection point. For more information see:

www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Terminal Server User Manual

3

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Safety Instructions

Laws and

Regulations

Use of the product must be in strict compliance with the local laws and

regulations. Please shut down the device in prohibited area.

Power Supply

Use of the product must be in strict compliance with the local electrical safety regulations.

Use the power adapter provided by qualified manufacturer. Refer to the product specification for detailed power requirements.

It is recommended to provide independent power adapter for each device as adapter overload may cause over-heating or a fire hazard.

Make sure that the power has been disconnected before you wire, install, or disassemble the device.

DO NOT directly touch exposed contacts and components once the device is powered up to avoid electric shock.

DO NOT use damaged power supply devices (e.g., cable, power adapter, etc.) to avoid electric shock, fire hazard, and explosion.

DO NOT directly cut the power supply to shut down the device. Please shut down the device normally and then unplug the power cord to avoid data loss.

DO NOT block the power supply equipment to plug and unplug conveniently.

Make sure the power supply has been disconnected if the power adapter is idle.

Make sure the device is connected to the ground firmly.

Symbol Description

Provides additional information to emphasize or supplement important points of the main text.

Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.

Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury.

Terminal Server User Manual

4

Transportatio

n, Use, and

Storage

To avoid heat accumulation, good ventilation is required for a proper operating environment.

Store the device in dry, well-ventilated, corrosive-gas-free, no direct sunlight, and no heating source environment.

Avoid fire, water, and explosive environment when using the device.

Avoid lightning strike for device installation. Install a lightning arrester if necessary.

Keep the device away from magnetic interference.

Avoid device installation on vibratory surface or places, and avoid equipment installation on vibratory surface or places subject to shock (ignorance may cause device damage).

DO NOT touch the heat dissipation component to avoid burns.

DO NOT expose the device to extremely hot, cold, or humidity environments. For temperature and humidity requirements, see device specification.

Maintenance

If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center.

If the device is abnormal, contact the store you purchased it or the nearest service center. DO NOT disassemble or modify the device in any way (For the problems caused by unauthorized modification or maintenance, the company shall not take any responsibility).

Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage to the device and the company shall not take any responsibility.

Network

Please enforce the protection for the personal information and the data security as the device may be confronted with the network security problems when it is connected to the Internet. Please contact us when the device might exist network security risks.

Please understand that you have the responsibility to configure all the passwords and other security settings about the device, and keep your user name and password.

Data DO NOT disconnect the power during formatting, uploading, and

downloading. Or files may be damaged.

Terminal Server User Manual

5

Table of Contents Chapter 1 Introduction ................................................................................................................... 8

Product Introduction ........................................................................................................... 8

Key Feature.......................................................................................................................... 8

System Requirement............................................................................................................ 8

Appearance ......................................................................................................................... 9

Chapter 2 Getting Started ............................................................................................................. 11

Start Up and Shut Down .................................................................................................... 11

Start Up .................................................................................................................... 11

Shut Down ................................................................................................................ 11

Reboot ...................................................................................................................... 11

Set Admin Password .......................................................................................................... 11

Chapter 3 Configure Network ....................................................................................................... 13

Configure External Network ............................................................................................... 13

Configure Internal Network ............................................................................................... 14

Configure DDNS ................................................................................................................. 14

Configure PPPoE ................................................................................................................ 15

Configure Static Router ...................................................................................................... 16

Configure Port ................................................................................................................... 17

Configure HTTPS ................................................................................................................ 18

Configure Security Service ................................................................................................. 19

Chapter 4 Live View ...................................................................................................................... 20

Add IP Camera ................................................................................................................... 20

Add IP Camera Manually ........................................................................................... 20

Add IP Camera Quickly .............................................................................................. 20

Configure Display Settings ................................................................................................. 20

Configure Local Parameters ............................................................................................... 21

Live View Operations ......................................................................................................... 22

Playback ............................................................................................................................ 24

Chapter 5 Configure Data ............................................................................................................. 26

Configure Dictionary .......................................................................................................... 26

Add Traffic Violation .................................................................................................. 26

Add Evidence Capture ............................................................................................... 26

Configure Blacklist and Whitelist........................................................................................ 26

Add List ..................................................................................................................... 26

Delete List ................................................................................................................. 27

Search List ................................................................................................................. 27

Export/Import List ..................................................................................................... 27

Configure Segment Speed Detection ................................................................................. 28

Configure Camera Matching .............................................................................................. 29

Configure Face Evidence .................................................................................................... 30

Chapter 6 Configure Camera......................................................................................................... 32

Terminal Server User Manual

6

Configure OSD ................................................................................................................... 32

Configure Text Overlay ....................................................................................................... 32

Configure Camera Parameter ............................................................................................. 32

Configure Picture Composition .......................................................................................... 34

Configure Composite Overlay ............................................................................................ 34

Configure Interaction ......................................................................................................... 34

Configure Other Traffic Settings ......................................................................................... 35

Chapter 7 Configure Record and Capture ..................................................................................... 37

Configure Format HDD ....................................................................................................... 37

Configure Picture Quota .................................................................................................... 37

Configure HDD Detection ................................................................................................... 38

S.M.A.R.T Settings ..................................................................................................... 38

Bad Sector Detection ................................................................................................ 38

Configure Video Parameter ................................................................................................ 39

Configure Holiday .............................................................................................................. 39

Configure Record Schedule ................................................................................................ 40

Configure Manual Record .................................................................................................. 42

Play Back ........................................................................................................................... 42

Configure Data Search ....................................................................................................... 42

Traffic Data Search .................................................................................................... 42

Traffic Parameters Statistics ...................................................................................... 43

Real-Time Data ......................................................................................................... 43

Chapter 8 Device Parameters ....................................................................................................... 44

Device Information ............................................................................................................ 44

Time Settings ..................................................................................................................... 44

DST Settings ....................................................................................................................... 44

Chapter 9 Serial Port Settings ....................................................................................................... 46

RS-232 Serial Port .............................................................................................................. 46

RS-485 Serial Port .............................................................................................................. 46

Chapter 10 Configure Backup ....................................................................................................... 48

Configure USB Backup ..................................................................................................... 48

Configure Web Backup..................................................................................................... 48

Chapter 11 Uploading Data .......................................................................................................... 50

Configure Host ................................................................................................................. 50

Configure FTP .................................................................................................................. 51

Configure Data Uploading ................................................................................................ 52

Chapter 12 Configure Alarm ......................................................................................................... 54

Alarm Input Settings ........................................................................................................ 54

Alarm Output................................................................................................................... 55

Linkage Action ................................................................................................................. 55

Alarm Exception .............................................................................................................. 56

Chapter 13 Status Information ..................................................................................................... 57

Server Status ................................................................................................................... 57

Terminal Server User Manual

7

Camera Status ................................................................................................................. 57

Chapter 14 Other Settings ............................................................................................................ 59

User Management ........................................................................................................... 59

Add a User .............................................................................................................. 59

Edit a User .............................................................................................................. 60

Delete a User .......................................................................................................... 60

Exception ......................................................................................................................... 60

Maintenance ................................................................................................................... 61

Reboot the Device................................................................................................... 61

Default Settings ....................................................................................................... 62

Restore Database .................................................................................................... 62

Export/Import Configuration File ............................................................................ 62

Remote Upgrade ..................................................................................................... 63

Terminal Server User Manual

8

Chapter 1 Introduction

Product Introduction

Terminal server provides multiply features, including video management, traffic data management, video and audio decoding, picture processing, network transmission, etc. It integrates network ports and fiber ports, effectively meets the demands of distributed storage and accessing to surveillance management platform. It is widely applied in checkpoint, Intersection Violation System, traffic surveillance system, etc.

Key Feature

IP camera is connectable.

Easy-to-dismounting design makes HDD convenient to maintenance.

Low consumption and lower heat generation.

Supports GPS time synchronization.

Supports operation via Web.

Supports audio alarm and alarm uploading.

Supports multiple text overlay and picture composition modes.

System Requirement

Web Browser Operating System

Internet Explorer 8.0 and above version Microsoft Windows XP SP1 and above version/Win 7/Win 8/Win 10 (32-bit or 64-bit)

Mozilla Firefox 30-41 version/Google Chrome 31.0-36.0.1985.143

Microsoft Windows XP SP1 and above version/Win 7/Win 8/Win 10 (32-bit only)

Terminal Server User Manual

9

Appearance

Appearance

Panel Description

Name Description

Power Indicator The indicator will be green when the server is powered on.

Alarm Indicator The indicator will be green when the server triggers alarm.

HDD Indicator The indicator will be flashing green when the HDD is reading or writing.

Ready Indicator The indicator will be solid green when the sever is ready.

Power Supply Power Supply

GND Ground

P1-P16 (100/1000M) Gigabit Ethernet is to connect camera by P1-P16 internal network.

Gigabit Ethernet(100/1000M)

G1 is in the same network with P1-P16/P1-P8/P1-P4, optical multiplexing with OPT.

G2 is to upload data to platform by external network, independent of G1.

Terminal Server User Manual

10

RS-485 RS-485 half-duplex interface.

RS-232 RS-232.

Audio input/output Audio input/output.

Alarm input/output Alarm input/output.

USB USB 3.0.

OPT Fiber interface of SFP standard.

Reset Long press for 5 seconds to restore default parameters and reboot.

GPS Antenna GPS Antenna

4G Antenna 4G Antenna

Panel may vary in different models, please refer to actual terminal server.

Terminal Server User Manual

11

Chapter 2 Getting Started

Start Up and Shut Down

Purpose:

Proper startup and shutdown procedures are crucial to expanding the life of the device.

Start Up

Before you start:

Fix the device in an equipment cabinet.

Ensure the device is properly grounded.

Plug the network cable

Plug the power supply to start up.

Make sure the power supply is plugged into an electrical outlet. It is highly recommended that an

Uninterruptible Power Supply (UPS) be used in conjunction with the device.

Shut Down

Unplug the power supply to shut down.

Reboot

For detailed steps, please refer to Reboot the Device.

Set Admin Password

Purpose:

For the first-time access, you need to activate the device by setting an admin password. No operation is allowed before activation. You can also activate the device via Web Browser, SADP or Client Software.

Before you start:

Set the IP address of your computer. Make sure the device is in the same network segment with your computer.

Terminal Server User Manual

12

The default IP address for G1 network interface is 192.1.0.64.

The default IP address for G2 network interface is 192.168.1.64.

Enter device IP address in address bar of the browser and press Enter. Thus the activation interface pops up.

Enter the Admin Password and Confirm Password.

Set Admin Password

STRONG PASSWORD RECOMMENDED We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

Click OK to set the admin password.

After successful login, follow the prompt to install the plug-in.

Installing Plug-in

Terminal Server User Manual

13

Chapter 3 Configure Network

Purpose:

Guarantee the network connection between your computer and the device is correct, thus you can control the device remotely.

Configure External Network

Go to Param Config. > Network > Basic Settings > TCP/IP > External Network Settings.

Basic Network Settings

Go to Param Config. > Network > Basic Settings > TCP/IP > External Network Settings.

1) Select the NIC Type in the dropdown list.

2) Enter IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway. Or you can select DHCP (Dynamic Host Configuration Protocol) to obtain IPv4 address dynamically.

Set the DNS Server.

Enter the Preferred DNS Server and Alternate DNS Server.

Click Save to save the above settings.

Terminal Server User Manual

14

Configure Internal Network

Purpose:

You can configure the IP address for the network interfaces. The default IP address is 192.1.0.64.

Go to Param Config. > Network > Basic Settings > TCP/IP > External Network Settings.

Basic Network Settings

Set the NIC Settings.

1) Select the NIC Type in the dropdown list.

2) Enter IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway. Or you can select DHCP (Dynamic Host Configuration Protocol) to obtain IPv4 address dynamically.

Set the DNS Server.

Enter the Preferred DNS Server and Alternate DNS Server.

Click Save to save the above settings.

Configure DDNS

Purpose:

If your device access internet via a dynamic IP address, you may set Dynamic DNS (DDNS) to be used for network access.

Before you start:

Prior registration with your DDNS Provider is required before configuring the system to use DDNS.

Terminal Server User Manual

15

Go to Param Config. > Network > Basic Settings > DDNS.

DDNS Settings

Select Enable DDNS.

Select the DDNS Type. Three different DDNS types are selectable: DynDNS, PeanutHull, and NO-IP.

DDNS Type: DynDNS

1) Enter Server IP for DynDNS server.

2) In the Domain text field, input the domain obtained from the DynDNS website.

3) Enter User Name and Password registered in the DynDNS website and Confirm the password.

4) Click Save to save the settings.

DDNS Type: PeanutHull

1) Enter the User Name and Password obtained from the PeanutHull website and Confirm the password.

2) Click Save to save the settings.

DDNS Type: No-IP

1) Enter Server IP addressfor NO-IP.

2) In the Domain text field, enter the domain obtained from the NO-IP website (www.no-ip.com).

3) Enter the User Name and Password registered in the NO-IP website and Confirm the password.

4) Click Save to save the settings.

Configure PPPoE

Go to Param Config. > Network > Basic Settings > PPPoE.

Terminal Server User Manual

16

PPPoE Settings

Check Enable PPPoE to enable this feature.

Enter user Name, password, and confirm passwordfor PPPoE access.

The User Name and Password should be assigned by your ISP.

For your privacy and to better protect your system against security risks, we strongly recommend

the use of strong passwords for all functions and network devices. The password should be

something of your own choosing (using a minimum of 8 characters, including at least three of the

following categories: upper case letters, lower case letters, numbers and special characters) in order

to increase the security of your product.

Proper configuration of all passwords and other security settings is the responsibility of the installer

and/or end-user.

Click Save to save the settings.

A reboot is required for the settings to take effect.

Configure Static Router

Purpose:

To access different local networks via G1 and G2 network interface, you need to configure static router. If you do not specify a router, the device will visit network via the default G1 gateway.

Go to Param Config. > Network > Basic Settings > Static Router.

Terminal Server User Manual

17

Static Router

Click Add.

Add

Check Enable.

Enter Target Network Segment, Subnet Mask, and Gateway.

Target Network Segment: The network segment of target server.

Subnet Mask: subnet mask of target network segment.

Gateway: gateway for the selected network interface.

Select Net Port.

Click OK to save the settings.

Configure Port

Go to Param Config. > Network > Basic Settings > Port.

Network Port Settings

Edit the HTTP Port, RTSP Port and HTTPS Port and Server Port.

RTSP Port: Port for getting stream from IP camera.

Terminal Server User Manual

18

HTTP Port: Port for browser to access the device.

HTTPS Port: Port for browser to access the device.

Server Port: Port for other devices or platform to access the device.

Click Save to save the settings.

Reboot the device to activate the new settings.

Configure HTTPS

Purpose:

HTTPS provides authentication of the web site and associated web server that one is communicating with, which protects against Man-in-the-middle attacks. Perform the following steps to set the port number of https.

Example:

If you set the port number as 443 and the IP address is 192.0.0.64, you may access the device by inputting https://192.0.0.64:443 via the web browser.

Go to Param Config. > Network > Basic Settings > Port.

Create the self-signed certificate or authorized certificate.

HTTPS Settings

Option 1: Create the self-signed certificate

1) Select the radio of Create Self-Signed Certificate.

2) Click the Create button to pop up the following dialog box.

3) Enter the Country, Hostname/IP, Validity, and other information.

4) Click OK to create the certificate.

Option 2: Install available certificate

Terminal Server User Manual

19

1) Select the radio of Signed certificate is available, Start the installation direction.

2) Click Browse and import the certificate to the device and install it.

Option 3: Create the authorized certificate

1) Select the radio of Create the certificate request first and continue the installation.

2) Click the Create button to create the certificate request.

3) Download the certificate request and submit it to the trusted certificate authority for signature.

4) After receiving the signed valid certificate, import the certificate to the device and install it.

There will be the certificate information after you successfully create and install the certificate.

Check Enable to enable HTTPS function.

Click the Save to save the settings.

Configure Security Service

Purpose:

SSH (Secure Shell) as a security protocol ensures network security for the remote accessing and other network service. It prevents information leakage issues during remote management.

Go to Param Config. > System > Security > Security Service.

Remote Access Settings

Enable SSH.

Click Save to enable it.

Terminal Server User Manual

20

Chapter 4 Live View

Add IP Camera Before you start:

The IP camera has accessed to terminal server.

Add IP Camera Manually

Add IP Camera Manually when terminal server password is different from IP camera.

Go to Param Config. > System > Camera Management > IP Camera.

Check required IP camera, and click Add.

Set IP camera parameters.

Click OK to save the settings.

Add IP Camera Quickly

IP Cameras can be quickly added when there are multiple IP cameras.

Go to Param Config. > System > Camera Management > IP Camera.

Check required IP camera, and click Quick Add.

Set IP camera parameters.

Click OK to save the settings.

Configure Display Settings Purpose:

You can configure display settings menu.

Go to Param Config. > Image > Display Settings.

Select camera to configure.

Configure brightness, contrast, saturation and hue according to need.

Optionally, you can click and select cameras you want to copy above settings to.

Click OK to save the settings.

Terminal Server User Manual

21

Configure Local Parameters Purpose:

The local settings refers to the parameters of the live view, record files and captured pictures. The record files and captured pictures are the ones you record and capture using the web browser and thus the saving paths of them are on the PC running the browser.

Go to Param Config. > Local.

Local Settings Interface

Configure the following settings:

Protocol: TCP, UDP, and MULTICAST are selectable.

TCP: Ensures complete delivery of streaming data and better video quality, yet the real-

time transmission will be affected.

UDP: Provides real-time audio and video streams.

MULTICAST: It is recommended to select MCAST type when using the Multicast

function.

Play Performance: Set the play performance to Shortest Delay, Balanced, or Fluency.

Rules: It refers to the rules on your local browser, select enable or disable to display or

not display the colored marks when event is triggered. E.g., enabled as the rules are, and

Terminal Server User Manual

22

the face detection is enabled as well, when a face is detected, it will be marked with a

green rectangle on the live view.

Image Format: Choose the image format for picture capture.

Record File Settings: Set the saving path of the recorded video files. Valid for the record files you recorded with the web browser.

Record File Size: Select the packed size of the manually recorded and downloaded video

files to 256M, 512M or 1G. After the selection, the maximum record file size is the value

you selected.

Save record files to: Set the saving path for the manually recorded video files.

Save downloaded files to: Set the saving path for the downloaded video files in

playback mode.

Capture and Clip Settings: Set the saving paths of the captured pictures and clipped video files. Valid for the pictures you capture with the web browser.

Save snapshots in live view to: Set the saving path of the manually captured pictures in

live view mode.

Save snapshots when playback to: Set the saving path of the captured pictures in

playback mode.

Save clips to: Set the saving path of the clipped video files in playback mode.

You can click Browse to change the directory for saving the clips and pictures, and click Open to

open the set folder of clips and picture saving.

Click Save to save the settings.

Live View Operations Purpose:

The live view interface provides following functions:

Display live view image of analog cameras and IP cameras.

Adjust the speed dome image by rotating it to a certain view, and configuring zoom, focus, and iris parameters.

Capture and recording.

Terminal Server User Manual

23

1

2

3

4 Live View

Live View Description

No. Name Description

1 Camera List List the analog cameras and added IP cameras.

2 Live View Window Display the live view image of the cameras.

3 PTZ Control Panel PTZ control panel for rotating speed dome.

4 Live View Control Bar

Live view control is provided.

Terminal Server User Manual

24

Live View Control Bar Description

Icon Description Icon Description

Split the live view window into 1 window, 4 windows or 9 windows.

Turn to previous page

Start live view for all the cameras Turn to next page.

Capture pictures for the selected camera. / Disable / Enable audio.

Start recording for all the cameras

Playback Purpose:

You can play back the record files of a specified day.

1

2 3

4

5 6 Playback Interface

Terminal Server User Manual

25

Playback Description

No. Name Description

1 Camera List List the enabled analog cameras and added IP cameras.

2 Playback Window Display the playback image.

3 Playback Status Show the playback status, including playback camera No. and playback speed.

4 Calendar Select a day to play back record files.

5 Playback Control Bar

Playback control is provided.

6 Time Bar 4 types of record file are marked with 4 colors.

Playback Control Bar Description

Icon Description Icon Description

Split the playback window into 1 window, 4 windows or 9 windows. Stop playback for all cameras.

/ Start/pause playback for selected camera.

Capture pictures for the selected camera.

Stop playback for selected camera. Download record files.

Slow forward. Clip.

Fast forward. / Audio.

Start single frame playback.

Terminal Server User Manual

26

Chapter 5 Configure Data

Configure Dictionary

Purpose:

Configure dictionary parameters to recognize the violation vehicle acts.

Add Traffic Violation

Go to Param Config. >Dictionary Settings >Traffic Violation.

Click Add.

Enter violation and violation code.

Click OK to save the settings.

Add Evidence Capture

Go to Param Config. >Dictionary Settings > Evidence Capture.

Click Add.

Enter evidence capture and evidence capture code.

Click OK to save the settings.

Configure Blacklist and Whitelist

Purpose:

To manage special license plate numbers, you can add them into blacklist or whitelist.

Enter blacklist/whitelist interface.

Add List

Go to Param Config. > Advanced Settings > Vehicle Arming > Arming Management.

Click Add.

Terminal Server User Manual

27

Adding Blacklist/Whitelist

Select Arming Type as Black List or White List.

Enter License Plate No.

Select Enable as Enabled to enable the function.

Set arming time.

Click OK to add the license plate number.

Delete List

Check the checkboxes of blacklists and whitelists to delete.

Click Delete to delete them.

Search List

Purpose:

You can search added license plate numbers in blacklist/whitelist.

Select Arming Type as Black List or White List in drop-down list.

Click Search to start searching.

Export/Import List

Export List

Purpose:

You can export all the license plate numbers in blacklist and whitelist to a local path.

Click Export.

Click Browse to select a local path and click Export to start export.

Terminal Server User Manual

28

License plate numbers will be exported in an Excel file.

Arming Type: 0 refers to Whitelist. 1 refers to Blacklist.

Status: 0 refers to disabled. 1 refers to enabled.

Exported Excel Content

License Plate Number Arming Type Status

HUA123 2 1

Import List

Purpose:

You can import license plate numbers to blacklist or whitelist in batch.

Click Download Import Template to download the Excel template.

Fill in license plate number, list type, and status in an Excel template.

Arming Type can only be 1 or 2. 0: whitelist. 1: blacklist.

Status can only be 0 or 1. 0: disabled. 1: enabled.

Click Import.

Click Browse to select a local path and click Import to start import.

Configure Segment Speed Detection

Purpose:

Calculate vehicle average speed within a road segment. There should be no fork with the road segment.

Go to Param Config. > Advanced Settings> Segment Speed Detection.

Check Enable to enable average speed detection feature.

Click Add.

Terminal Server User Manual

29

Section Settings

Check Enable.

Configure section parameters and vehicle speeding parameters.

Segment Name: Enter Segment Name.

Segment Length: Enter Segment Length according to actuality.

Segment Scene: Select Segment Scene as Highway Mode or City Mode according to actuality.

Entrance/ Exit Channel: The selected channels must be traffic cameras.

Marked Speed Limit for Large-Sized Vehicle: The actual speed limit value. Enter the value according to actuality.

Speed Limit for Large-Sized Vehicle: The value cannot be smaller than Large-Size Vehicle Speeding Percentage.

Speed Limit for Large-Sized Vehicle Exception: The value must be larger than both Large-Size Vehicle Speeding Percentage and Large-Size Vehicle Speed Limit.

Marked Speed Limit for Small-Sized Vehicle: The actual speed limit value. Enter the value according to actuality.

Speed Limit for Small-Sized Vehicle: The value cannot be smaller than Small-Size Vehicle Speeding Percentage.

Speed Limit for Small-Sized Vehicle Exception: The value must be larger than both Small-Size Vehicle Speeding Percentage and Small -Size Vehicle Speed Limit.

Click OK.

Configure Camera Matching

Purpose:

Compose the two picture of vehicles. Configure the following parameters according to your actual camera type.

Go to Param Config. > Advanced Settings > Camera Matching.

Terminal Server User Manual

30

Check Enable to enable camera match.

Click Add.

Camera Matching

Check Enable.

Select Camera No. to configure.

Select Main Channel and Sub-Channel.

Select Linkage Action according to selected main channel and sub-channel.

Coil Linkage: One of main channel and sub-channel must be a panorama camera, the other is a capture camera. Device will collage the captured pictures of main channel and sub-channel.

Video Linkage: Main channel and sub-channel must support license plate recognition feature. When the recognized license plate number of main channel and sub-channel matches, device will collage the captured pictures of main channel and sub-channel.

Click OK.

Configure Face Evidence

Purpose:

Compose pictures of E-Police and checkpoint according to license plate recognition. It provides evidence of vehicle violation acts.

Segment speed detection, camera matching and face evidence cannot be supported at the same

time.

Go to Param Config. > Advanced Settings > Face Evidence.

Check Face Evidence.

Check Compose, and configure parameters.

Terminal Server User Manual

31

Camera Matching

Matching Retrospect Time: Retrospect time from first E-Police picture, to match forward checkpoint pictures.

Matching Delay Time: Delay time from first E-Police picture, to match checkpoint pictures.

Click Save to save the settings.

Go to Channel Linkage, add required linked groups.

Terminal Server User Manual

32

Chapter 6 Configure Camera

Configure OSD

Purpose:

You can configure parameters of OSD (On Screen Display) menu.

Go to Param Config. > Image > OSD Settings.

Select camera to configure.

Configure parameters according to your need, including Camera Name, Display Name, Display Date, Display Week, Time Format, Date Format.

Optionally, you can click and select cameras you want to copy above settings to.

Click OK to save the settings.

Configure Text Overlay

Purpose:

You can overlay 8 text contents onto the video.

Go to Param Config. > Image > OSD Settings.

Select camera to configure in Select Camera dropdown list.

Enter contents in the text content.

Check the checkbox of text content you want to display.

Click Save to show the contents.

Configure Camera Parameter

Purpose:

You can configure camera parameter settings.

Go to Param Config. > System > Camera Management> Camera Parameter.

Terminal Server User Manual

33

Monitoring Spot Information

Select camera to configure in Camera dropdown list.

Select Camera Type as Camera for Video Surveillance (No Capture) or Intelligent Traffic Camera.

Camera for Video Surveillance: Terminal server stores camera video files. Camera picture files wont be stored.

Intelligent Traffic Camera: Terminal server stores both camera video files and picture files.

Enter Camera No. and Camera No. (Internal).

Camera No.: Used to distinguish traffic cameras from each other. Enter an exclusive No. for each camera. It only supports letter and number in 30 bytes.

Camera No. (internal): Used to distinguish traffic cameras in different checkpoints. Enter an exclusive No. for each camera. It only supports number no bigger than 4,294,967,295.

Select Direction according to actual installation.

Enter detailed information for camera in the four text contents, including Camera Location Information 1, Camera Location Information 2, Camera Location Information 3, and Camera Location Information 4.

Camera Location Information 1: No more than 120 characters.

Camera Location Information 2: No more than 40 characters.

Camera Location Information 3: No more than 30 characters.

Camera Location Information 4: No more than 120 characters.

Click Save to save the settings.

Terminal Server User Manual

34

Configure Picture Composition

Purpose:

Configure image collage layout and other parameters.

Go to Param Config. > Picture Settings > Picture Composition.

Select camera to configure.

Set Compose as Enable.

Select layout for 2 Captured Pictures and 3 Captured Pictures.

Configure picture Composition parameters.

Click Save to save the settings.

Configure Composite Overlay

Purpose:

Overlay text on composite pictures.

Go to Param Config. >Picture Settings >Composite Overlay.

Select camera to configure.

Select Text Overlay Method.

Select content.

Set text parameters including Initial Top Margin, Initial Left Margin, Character Size, Font Color, Background Color, Space Number, and Position Percentage of Line Break.

Initial Top Margin: Text position from top margin.

Initial Left Margin: Text position from left margin.

Position Percentage of Line Break: Text will switch to next line when the percentage between text length and picture width reaches the set value.

Click Save tosave the settings.

Configure Interaction

Purpose:

Configure the Interaction Mode between terminal server and traffic cameras.

Go to Param Config. > System > Camera Management > Interaction Settings.

Terminal Server User Manual

35

Interaction Settings

Select camera to configure in Select Camera dropdown list.

Select Interaction Mode as Normal Mode or Data Receiving Mode. The default one is Normal Mode.

Normal Mode: Device can record videos, live view, and receive pictures from the selected camera.

Data Receiving Mode: Device can only receive pictures from the selected camera. Recording videos and live view are not supported.

Click and select camera(s). Thus to configure the same parameters to selected camera(s).

Click Save to save the settings.

Configure Other Traffic Settings

Purpose:

Configure other traffic settings for device.

Go to Param Config. > Advanced Settings > Other Settings.

Other Settings

Terminal Server User Manual

36

Select Traffic Camera Connection Mode: as Arming Mode or Listening Mode. The default mode is Arming Mode.

Arming Mode: Terminal server takes pictures from traffic cameras. Terminal server is the active device.

Listening Mode: Traffic cameras upload pictures to terminal server. Terminal server is the passive device.

Select Arming Level: as Level 1, Level 2, or Level 3. The default Arming Level is Level 1.

Level 1: The terminal server has the highest priority to receive pictures from connected traffic cameras. Ensures no picture loss.

Level 2: Two terminal servers can receive pictures from one traffic camera. They are equal to cameras.

Level 3: Three terminal servers can receive pictures from one traffic camera. They are equal to cameras.

Select Camera Time Synchronization as Enable or Disable.

Enable: Terminal server synchronizes the connected traffic cameras time.

Drag the sliders to set Pre-record (s), Post-record (s), or Longest Recording Time (s): for violation videos.

Pre-record (s): The time you set to record before the violation. For example, when a violation occurs at 10:00, if you set the pre-record time as 4 seconds, the camera records it at 9:59:56.

Post-record (s): The time you set to record after the violation. For example, when a violation ends at 11:00, if you set the post-record time as 6 seconds, it records till 11:00:06.

Longest Recording Time (s): The longest time for a violation video.

When you search the violation pictures, you can view the violation video as while. In order to

keep the violation video completeness, set the all-day record schedule for cameras.

Enter Cabinet Door Name and Cabinet Door No. according to actual installation.

Click Save to save the settings.

Terminal Server User Manual

37

Chapter 7 Configure Record and Capture

Configure Format HDD

Purpose:

Initialize the HDD before you use it.

HDD amount varies according to different models. You can refer to specification for details.

Format HDD will cause HDD blacklist data lost. Export and save the blacklist before you

format HDD, and import it after formatting.

Go to Param Config. > Storage > Storage Management > HDD Management.

Check the checkbox of HDD to format.

Click Format.

Click OK to save the settings.

HDD Management

Configure Picture Quota

Purpose:

You can set the maximum capacity for saving picture.

Go to Param Config. > Storage > Storage Management > Picture Quota.

Advanced Settings

Enter the Picture Quota in the text field. The other HDD capacity is for video files.

Click OK to save the settings.

Terminal Server User Manual

38

Configure HDD Detection

Purpose:

The device provides the HDD detection function such as the adopting of the S.M.A.R.T and the Bad Sector Detection technique. The S.M.A.R.T (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system for HDD to detect and report on various indicators of reliability in the hopes of anticipating failures.

S.M.A.R.T Settings

Go to Param Config. > Storage > Storage Management > HDD Detection > S.M.A.R.T Detection.

Select the HDD to view its S.M.A.R.T information.

The related information of the S.M.A.R.T. is shown on the interface.

Choose the Self-Test Type as Short Test, Expanded Test or the Conveyance Test.

Click Start to start the S.M.A.R.T. HDD self-evaluation.

S.M.A.R.T Settings Interface

Bad Sector Detection

Go to Param Config. > Storage > Storage Management > HDD Detection > Bad Sector Test.

Select the HDD No. in the drop-down.

Choose Test Type as Full Detection or Key Area Detection.

Click Start Detect to start the detection. You can pause or cancel the detection.

Terminal Server User Manual

39

Configure Video Parameter

Purpose:

You can define the parameters that affect the image quality, such as the transmission stream type, the resolution and so on.

Go to Param Config. > Video & Audio > Video.

Video Settings

Select the camera.

Select stream to configure as Main Stream (Normal), Sub-stream, or Main Stream (Event).

Main Stream (Normal): Stream for normal recording.

Sub-stream: Stream for network transmission.

Main Stream (Event): Stream for event recording.

Configure Encoding Parameters. You can configure the stream type, resolution, and other parameters on your demand.

Optionally, click and select cameras to copy the above parameters to.

Click OK to save the settings.

Configure Holiday

Purpose:

You may want to have different recording schedule on holiday or special days. Follow the steps to specify holiday date.

Go to Param Config. > Storage > Advanced Settings > Holiday.

Terminal Server User Manual

40

Holiday Settings

Click to edit the holiday.

Up to 32 holidays can be configured.

Edit Holiday

Edit the Holiday Name.

Check the Enable Holiday checkbox.

Select holiday Type as By Date, By Week or By Month.

Enter Start Date and End Date.

Click OK to save the settings.

Configure Record Schedule

Purpose:

Set the record schedule as timing recording or alarm triggered recording, and then the camera automatically starts/stops recording according to the configured schedule.

Go to Param Config. > Storage > Schedule Settings > Recording Schedule.

Terminal Server User Manual

41

Recording Schedule Interface

Check Enable to enable scheduled recording.

Click Advanced to set the camera record parameters.

Pre-record: The time you set to start recording before the scheduled time or the event. For example, if an alarm triggers recording at 10:00, and the pre-record time is set as 5 seconds, the camera starts to record at 9:59:55.

The Pre-record time can be configured as No Pre-record, 5s, 10s, 15s, 20s, 25s, 30s, or not limited.

Post-record: The time you set to stop recording after the scheduled time or the event. For example, if an alarm triggered recording ends at 11:00, and the post-record time is set as 5 seconds, the camera records until 11:00:05.

The Post-record time can be configured as 5s, 10s, 30s, 1 min, 2 min, 5 min or 10 min.

Stream Type: Select the stream type for recording.

Select a record type. The record type can be Timing or Alarm.

Timing

The video will be recorded automatically according to the time of the schedule.

Alarm

The video will be recorded when the alarm is triggered via the external alarm input channels.

Click Save to save the settings.

Terminal Server User Manual

42

Configure Manual Record

Go to Live View, click to start record.

Play Back

Purpose:

You can play back the record files of a specified day.

Go to Playback.

Select the camera, and file date.

Click Search to play back the file.

Playback Control Bar Description

Icon Description Icon Description

Split the playback window into 1 window, 4 windows or 9 windows. Stop playback for all cameras.

/ Start/pause playback for selected camera.

Capture pictures for the selected camera.

Stop playback for selected camera. Download record files.

Slow forward. Clip.

Fast forward. Enable/disable audio.

Configure Data Search

Traffic Data Search

Purpose:

You can search traffic data of cameras.

Go to Data Search > Traffic Data Search.

Set Start Time and End Time.

There must be less than 7 days between start time and end time.

Set search conditions.

Terminal Server User Manual

43

Click Search to view information.

(Optional) Click Details to view details.

(Optional) Click Export to export data information to specified directory.

If you use IE browser, before you export data first time, Click > Internet Option >

Security > Trusted Sites, and click Sites to add this website to your trusted sites. Click OK and

restart the browser.

Traffic Parameters Statistics

Purpose:

You can search traffic statistics to view traffic situation.

Go to Data Search > Traffic Parameters Statistics.

Set Start Time and End Time.

Set statistics conditions.

Click Statistics to view information.

(Optional) Click Export to export data information to specified directory.

Real-Time Data

Go to Real-Time Data toview violation vehicle information.

Terminal Server User Manual

44

Chapter 8 Device Parameters

Device Information

Purpose:

You can enter Device Information interface to view the basic information of device.

Go to Param Config. > System > System Settings > Basic Information, you can view the basic information.

Time Settings

Purpose:

You can synchronize the date and time of the device manually or automatically.

Go to Param Config. > System > System Settings > Time Settings.

Select Time Zone from the dropdown list.

Select required synchronization mode.

NTP Time Sync.

Enter Server Address, NTP Port and Interval.

Manual Time Sync.

Enter the device time and set time. Or you can select Sync. with computer time.

GPS Time Sync.

SDK Time Sync.

Select remote host and set IP address.

Ehome Time Sync.

DST Settings

Purpose:

DST (Daylight Saving Time) is the practice of advancing clocks during summer months by specified hours so that evening daylight lasts specified hours longer while sacrificing normal sunrise times.

Go to Param Config. > System > System Settings > DST.

Terminal Server User Manual

45

DST Settings Interface

Check Enable DST.

Set Start Time, End Time, and DST Bias.

Or you can manually check Enable DST, and then you choose the date of the DST period.

Terminal Server User Manual

46

Chapter 9 Serial Port Settings

Purpose:

Configure RS-232 serial port and RS-485 serial port.

RS-232 Serial Port

Purpose:

Connect the RS-232 serial interface in device rear panel with the one on computer. Thus device can communicate with computer.

Go to Param Config. > System > System Settings > Serial Port.

RS-232 Settings

Configure the parameter, including Baud Rate, Data Bit, Stop Bit, Verification, Flow Control and Control Mode.

Make sure the parameters are exactly the same with the computer parameters.

Click Save to save the settings.

RS-485 Serial Port

Go to Param Config. > System > System Settings > Serial Port.

RS-485 Settings

Configure the parameter, including Baud Rate, Data Bit, Stop Bit, Verification, Flow Control and Control Mode.

Terminal Server User Manual

47

Make sure the parameters are exactly the same with the connected device.

Click Save to save the settings.

Terminal Server User Manual

48

Chapter 10 Configure Backup

Configure USB Backup

Purpose:

You can export data to USB backup device.

Before you start:

Plug a USB backup device into the USB interface in rear panel.

Go to Param Config. > Backup Settings > Local Backup > USB Backup Settings.

USB Backup Settings

Select Enable USB Backup as Enable.

Set Backup Period.

1) Select Backup Period as Real-Time Backup or Backup Every Day. The recommend one is Real-time Backup.

Real-Time Backup: Export pictures and video files immediately to USB backup device, once terminal server receives any data.

Backup Every Day: Export last days pictures and video files in every 0 a.m.

2) Set the Backup Start Time to export historical files.

Select the Data Type to backup.

Set Saving Path and File Name.

Click Save to save the settings.

Configure Web Backup

Purpose:

In Traffic interface, you can export traffic information. And you can set the file name and directory for the backup files, including license plate pictures and traffic violation pictures and videos.

Go to Param Config. > Backup Settings > Web Backup Settings.

Terminal Server User Manual

49

Edit the parameters.

Click Save to save the settings.

Terminal Server User Manual

50

Chapter 11 Uploading Data

When gateways of G1 and G2 are configured, you should also configure static route when

uploading data to platform or FTP

Configure Host

Purpose:

Configure the Remote Host settings to upload data to Remote Host.

Go to Param Config. > Platform Settings > Remote Host.

Host Settings

Select Remote Host.

You can configure both the two Remote Hosts. Files can be uploaded to the two Remote Hosts.

Click Param Config.

Select Upload Protocol as SDK Protocol or Private Protocol. The default Upload Protocol is SDK Protocol.

iVMS-8600 whose version is V2.3 or above supports both SDK Protocol and Private Protocol. Other versions only support Private Protocol.

Enter selected Remote Host IP Address and Port.

The default Port for SDK Protocol and Private Protocol are 5650 and 5682 separated.

Select Data Type to upload in the dropdown list.

You can select Upload Historical Data and Upload No-Plate Data as Enable to upload historical data and No-plate data.

Upload Historical Data: Upload historical data in HDD.

Terminal Server User Manual

51

Enable the Upload by Time and set the Uploading Start Time and Uploading End Time. Up to 2 periods can be set. Device only uploads data during the start time and end time.

Enter Upload Interval (ms) and Upload Timeout Interval (ms).

Optionally, set the Enable Cloud Storage settings. Thus the data are saved in Cloud Storage device.

1) Check Enable Cloud Storage checkbox.

2) Enter cloud storage Management Server IP Address, Command Port, User Name, and Password.

3) Enter Normal Vehicle Picture and Record File Pool ID and Traffic Violation Picture and Record File Pool ID.

Click Save to save the settings.

Configure FTP

Purpose:

Device provides two FTP servers. Configure the parameters, thus to upload data to the two FTP servers.

Go to Param Config. > Platform Settings > FTP Upload Settings > Param Config..

Custom Settings

Select FTP Server 1 tab or FTP Server 2 tab. You can enable both of them or one of them. The Custom Parameters interface is reserved.

Click Param Config.

Select Enable in FTP dropdown list.

Enter FTP Server Address, FTP Port, FTP User Name, and FTP Password.

You can select Upload Historical Data and Upload No-Plate Data as Enable to upload historical data and No-plate data.

Enable the Upload by Time and set the Uploading Start Time and Uploading End Time. Up to 2 periods can be set.

Select Data Type.

1) Click on text field to pop up Data Type items.

2) Check the checkbox (es) of item (s) to upload.

3) Click OK to save the settings and go back to upper level.

Terminal Server User Manual

52

Edit uploading file name and saving path.

Click OK to save the settings.

Configure Data Uploading

Purpose:

Set parameters for uploading historical files and re-uploading files to Remote Host.

Before you start:

To upload data to remote host, enable the Upload Historical Data function in Host settings first.

To upload data to FTP server, enable the Upload Historical Data function in FTP settings first.

Go to Param Config. > Platform Settings > FTP Upload Settings > Data Upload Settings.

Configure the four hosts parameters before selecting Remote Host as any of them. For detailed steps, please refer to Configure Host and Configure FTP

Click Data Upload Settings.

Data Retransmission

Select Data Uploading.

Data Retransmission: Resends files to Remote Host.

Upload Historical Data First: Sends historical files first. Otherwise terminal server sends historical files when free.

Disable: Terminal server wont upload historical data when free.

Enter Start Time and End Time, thus to specify the start time and end time of uploaded file.

Select uploading Data Type in dropdown list.

Terminal Server User Manual

53

Click Save to save the settings.

Terminal Server User Manual

54

Chapter 12 Configure Alarm

Alarm Input Settings

Purpose:

Follow the steps to configure the alarm input recording schedule and alarm responding actions.

Go to Param Config. > Event > Basic Event > Alarm Input.

Alarm Input Settings

Select Alarm Input No..

Select Alarm Type.

Normal Open: Alarm linking method and alarm recording are triggered when the alarm

input is closed.

Normal Closed: Alarm linking method and alarm recording are triggered when the alarm

input is opened.

Enter Alarm Name.

Select the time period.

(Optional) Click Delete to delete the current arming schedule, or click Save to save the settings.

Terminal Server User Manual

55

Move the mouse to the end of each day, a copy dialogue box pops up, and you can copy the current settings to other days.

Click Linkage Action to configure linking action.

Set Alarm Linking, Trigger Alarm Output, Alarm Linked Recording, and PTZ Linking according to your needs. Once an alarm occurs, the selected linking method will be triggered.

Configure the alarm record schedule.

Click Save to save the settings.

Alarm Output

Purpose:

You can configure the delay time, arming time, and alarm output name.

Go to Param Config. > Event > Basic Event > Alarm Output.

Alarm Output

Select Alarm Output No..

Select the Delay Time. Thus the device sends out alarm output signal for the set time.

Enter Alarm Name.

Configure the arming time. The alarm output signal is only available in arming time.

Click Save to save the settings.

Linkage Action

Purpose:

Terminal Server User Manual

56

You can set required linkage action of event.

Normal Linkage

Select Audio Warning when beep is required in event alarm.

Select Notify Surveillance Center when prompt alarm image is required in surveillance display.

Select Full Screen Monitor when full screen display is required.

Trigger Alarm Output

Check Trigger Alarm Output when trigger alarm output is required once event occurs.

Trigger Recording

Check Trigger Recording when trigger recording is required once event occurs.

Alarm Exception

Purpose:

Set exception alarm of HDD full, HDD error, network cable disconnected, IP address conflicted, illegal login, video signal exception, input/output video standard mismatch, record/capture exception.

Go to Param Config. > Event > Basic Event > Exception.

HDD Full: Alarm when HDD is full, and content is not input into HDD.

HDD Error: Alarm when there is HDD error.

Network Cable Disconnected: Alarm when network cable is disconnected.

IP Address Conflicted: Alarm when IP Address is conflicted. You need to edit IP address

Illegal Login: Alarm when wrong password is entered.

Video Signal Exception: Alarm when there is video signal exception

Input/ Output Video Standard Mismatch: Alarm when input video standard mismatches output video standard.

Record/Capture exception: Alarm when there is record/capture exception

Configure linkage action.

Click Save to save the settings.

Terminal Server User Manual

57

Chapter 13 Status Information

Server Status

Purpose:

You can view the network status, server working status, and network uploading status.

Go to Param Config. > System Status > Server Status > Working Status.

Status

Click Network Status or Working Status to view system status.

Network Status: Shows all network interfaces status.

Working Status: Displays the system working status.

Camera Status

Purpose:

You can view the Traffic Flow Statistic information, Front-end Device Status, and Camera Status. The function is only available when the connected camera supports traffic flow statistics.

Before you start:

Select the Camera Type.

Go to Param Config. > System Status > Status.

Terminal Server User Manual

58

Camera Status

Select the Traffic Flow Statistics, Front-End Device Status, or Camera Management Status to view camera status.

Traffic Flow Statistics: Shows the Average Speed, Traffic Flow, Lane Occupancy, and Time Interval of Vehicle Head information.

Front-End Device Status: Shows the camera, vehicle detector, or signal lamp detector working status.

Camera Management Status: Shows the Camera Version, Camera Serial No., Login Status, and Arming Status.

Terminal Server User Manual

59

Chapter 14 Other Settings

User Management

Purpose:

You can add, edit, and delete users.

Add a User

Go to Param Config. > System > User Management.

Click Add to enter the Add user interface.

Add User

Enter the User Name and Password, and confirm the password.

STRONG PASSWORD RECOMMENDED We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

Terminal Server User Manual

60

Select type.

Configure the user permissions for the created user account.

Click OK to add the user.

Edit a User

You need the admin password to edit the admin user.

Select a user account.

Click Edit to enter the setting interface.

Modify the User Name, and Password.

STRONG PASSWORD RECOMMENDED We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

Configure the user permission for the user.

Click OK to save the settings.

Delete a User

Select a user account from the list on the User Information interface to be deleted.

Click Delete.

Click OK to delete the selected user account.

Exception

Purpose:

You can specify the linkage action and triggered alarm output for nine exception types.

HDD Full: The HDD is full.

HDD Error: Writing HDD error or unformatted HDD.

Network Disconnected: Disconnected network cable.

IP Conflicted: Duplicated IP address.

Violation Access: Incorrect user ID or password.

Terminal Server User Manual

61

Video Standard Mismatch: I/O video standards do not match.

Video Signal Exception: Unstable video signal.

Record/Capture Exception: Unable to recording or capture.

Go to Param Config. > Event > Basic Event.

Exception

Select the Exception Type in the dropdown list.

Select Normal Linkage and Trigger Alarm Output.

Click Save to save the settings.

Maintenance

Purpose:

You can restart, restore default, repair database index, export/import configuration file, and upgrade device.

Reboot the Device

Go to Param Config. > System > System Maintenance.

Click Reboot to reboot the device.

Optionally, check Auto-Reboot checkbox. Then the device reboots automatically 2 a.m. every day.

Optionally, check Reboot without HDD checkbox. Then the device reboots automatically when no HDD is detected.

Reboot

Terminal Server User Manual

62

Default Settings

Select the restoring type as Restore or Default.

Restore: Restore all parameters, except the network (including IP address, subnet mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the factory default settings.

Default: Restore all parameters to the factory default settings.

Default

Restore Database

Purpose:

When errors happen, such as searching data failed, uploading data failed, etc., repairing database function is one of the method to recover the errors.

Click Restore to restore database.

Restoring Database Index

Export/Import Configuration File

Importing/Exporting Configuration File

Import configuration file.

1) Click Browser.

2) Select configuration file path.

3) Click Import to import the selected file.

Export configuration file.

1) Click Export.

2) Select exporting path.

Terminal Server User Manual

63

3) Click Save to save the configuration file.

Remote Upgrade

Click Browse.

Select upgrade file.

Click Upgrade to upgrade.

Remote Upgrade

Manualsnet FAQs

If you want to find out how the DS-TP50-16E Hikvision works, you can view and download the Hikvision DS-TP50-16E Server User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Hikvision DS-TP50-16E as well as other Hikvision manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Hikvision DS-TP50-16E. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Hikvision DS-TP50-16E Server User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Hikvision DS-TP50-16E Server User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Hikvision DS-TP50-16E Server User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Hikvision DS-TP50-16E Server User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikvision DS-TP50-16E Server User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.