Hikvision DS-PT1-WE Reader User's Manual PDF

1 of 5
1 of 5

Summary of Content for Hikvision DS-PT1-WE Reader User's Manual PDF

2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

1 Appearance

2 Enrollment Note: The enrollment progress will be completed in 3 to 10 seconds normally.

Note: The packaging box includes 2pcs tags (DS-PT-M1) by default.

The distance between the device and AXPRO should be less than 50 cm.

1 Enroll the Peripheral Locally

1. Log in to the APP Store, download and install the App. 2. Power on the security control panel. 3. Log in the APP and tap the icon "+" . Scan the QR code or input the control panel serial No. to add the control panel.

1. In the APP, tap the "Enrollment Mode" button on the control panel page to make the control panel enter the enrollment status. 2. Loosen the screw and remove rear panel. 3. Power on the peripheral, and it will be automatically enrolled to the control panel.

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU, the RoHS Directive 2011/65/EU.

replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types); disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recy- clethis.info

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. REPLACEMENT OF A BATTERY WITH AN INCORRECT TYPE THAT CAN DEFEAT A SAFEGUARD. DO NOT MIX OLD AND NEW BATTERIES. SUPPLIED BETTERY BRAND IS RECOMMENDED.

CAUTION

CHEMICAL BURNING DANGER DO NOT SWALLOW THE BATTERY KEEP NEW AND USED BATTERIES AWAY FROM THE CHILDREN.

IF YOU THINK BATTERIES MIGHT HAVE BEEN SWALLOWED OR PLACED INSIDE ANY PART OF THE BODY, SEEK IMMEDIATE MEDICAL ATTENTION.

CAUTION

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUC- TIONS AND LOCAL REGULATION.

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

Area Indicator

Tamper Button

Power Switch

xxxx

Enrollment Mode

CAUTION

IF THE BATTERY COMPARTMENT DOES NOT CLOSE SECURELY, STOP USING THE PRODUCT AND KEEP IT AWAY FROM CHILDREN.

1

Serial Port

Wireless Tag Reader DS-PT1-WE

Security Grade(SG) 2 Environmental Class(EC) II

Certified by Telefication

EN 50131-1:2006+A1:2009+A2:2017 EN 50131-3:2009

EN 50131-5-3:2017 UD27841B

1. Check Signal Strength Enter the signal checking mode by operating on the control panel. Trigger the device. Solid Green for 3 s - Strong Signal Solid Orange for 3 s - Medium Signal Solid Red for 3 s - Weak Signal Red light flashes for 3S - Lost Signal

2. Install the tag reader. Note: The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment and its associated mounting means shall remain secure during the installation. After the installation, the equipment, including any associated mounting plate, shall not be damaged.

a. Secure the rear panel on the wall with four screws.

3 Installation

2 Enroll the Peripheral with QR and serial No. 1. In the APP, tap the icon "+"and scan the QR code or serial No. on the peripheral. 2. Loosen the screw and remove rear panel. 3. Power on the peripheral, and it will be automatically enrolled to the control panel.

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

xxxx

Device

Signal Strength Test

2

7 times

b. Tighten the set screw on the bottom of the device.

The areas are disarmed

Present the tag once

Present the card once again

Short tag swiping (<3 s): away arming Long tag swiping (3 s): stay arming

Short tag swiping (<3 s): away arming Long tag swiping (3 s): stay arming

The area indicators flashes together.

4 Operation

Arming

Arming/Disarming

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

3

Wait for indicator change

Present the card when the indicator of the specified area is flashed

The area indictaors flashes alternately.

Armed: Area indicator turns solid blue.

Armed: Area indicator turns solid blue.

Failed: Status indicator turns flashing amber. Buzzer beeps three times.

Failed: Status indicator turns flashing amber. Buzzer beeps three times.

Arm all areas Arm the specified area

Present the tag twice

Present the card once again

Disarming

Wait for indicator change

Present the card when the indicator of the specified area is flashed

The indicators of armed area turns solid blue for 3 s.

The indicators of armed area flashes together.

The area indicators flashes alternately.

Disarmed: Area indicator turns off. Status indicator flashes green twice.

Failed: Status indicator turns flashing amber. Buzzer beeps three times.

Failed: Status indicator turns flashing amber. Buzzer beeps three times.

Disarm all areas Disarm the specified area

Disarmed: Area indicator turns off. Status indicator flashes green twice.

The areas are disarmed

Present the tag once

Present the card once again

Short tag swiping (<3 s): away arming Long tag swiping (3 s): stay arming

The area indicators flashes together.

Arming

Arming/Disarming(Simple Mode)

Formatting Hold the tamper switch for 8 s and power the device on at the same time. The red LED flashes 3 times when the formatting operation is completed.

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

4

Armed: Area indicator turns solid blue.

Failed: Status indicator turns flashing amber. Buzzer beeps three times.

Present the tag twice

Present the card once again

Disarming

The indicators of armed area turns solid blue for 3 s.

The indicators of armed area flashes together.

Disarmed: Area indicator turns off. Status indicator flashes green twice.

Failed: Status indicator turns flashing amber. Buzzer beeps three times.

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

6 Specification

5 Operation Caution and Device Maintenance - All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region. - Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). - Please make sure that the power has been disconnected before you wire, install or dismantle the device. - If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. - Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). - Do not place the device in extremely hot (refer to the specification of the device for the detailed operation temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation. - The device for indoor use shall be kept from rain and moisture. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). - Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time. - Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufactur- er. - Do not expose the device to the corrosive gas. Otherwise the equipment damage may occur. - Do not expose the device to the explosive situation.

5

Note: - when the low voltage message appears there will be at least 30 days of use. - The tag ID/PIN is a 32 bit long integer, and the variant could be 42949672956.

Frequency 868 MHz Metod Two-way communication Distance 1.2 KM Tamper Switch 1, rear panel tamper-proof

Indicator 1 status indicator(red, green, blue), and 4 area arming indicator (blue)

Power Switch/ Learnt Button 1

Power Supply 1.5V, 3 AA batteries, (included, Capacity: 2300 mAh each) 2 years battery life span (10 times presenting each day)

Low Voltage Value 1.2 V Voltage Range Fully charged (new) to 1.2 V (battery)

Consumption Max. current: 292mA Quiescent current: 110uA

PS Type Type C Operation Humidity 10 to 90 Operation Temperature 10 to +55 (-10 C to 40 C EN Certified) Classification Use inside the supervised premises,Type: ACE Installation Wall mounting Weight 124mm x 75mm x 21mm Dim

Manualsnet FAQs

If you want to find out how the DS-PT1-WE Hikvision works, you can view and download the Hikvision DS-PT1-WE Reader User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Hikvision DS-PT1-WE as well as other Hikvision manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Hikvision DS-PT1-WE. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Hikvision DS-PT1-WE Reader User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Hikvision DS-PT1-WE Reader User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Hikvision DS-PT1-WE Reader User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Hikvision DS-PT1-WE Reader User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikvision DS-PT1-WE Reader User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.