Contents

Hikvision DS-TDSB00-EKT Radar User's Manual PDF

Download download
Hikvision Radar DS-TDSB00-EKT User's Manual
Pages 17
Year 2022
Language(s)
English en
1 of 17
1 of 17

Summary of Content for Hikvision DS-TDSB00-EKT Radar User's Manual PDF

Page 1

0

DS-TDSB00-EKT/4m Fall Detection Radar

User Manual

Page 2

Fall Detection Radar User Manual

I

Legal Information

2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information

hereinafter are for description and explanation only. The information contained in the Manual is subject to change,

without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision

website (https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks

and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS

HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION

MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY

QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO

EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,

INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,

CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT

(INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT,

EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION

SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES

RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,

HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE

FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING

THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT

LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY

RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR

PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR

BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR

FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.

Page 3

Fall Detection Radar User Manual

II

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol Description

Provides additional information to emphasize or supplement important points of the main text.

Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.

Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury.

Page 4

Fall Detection Radar User Manual

III

TABLE OF CONTENTS Chapter 1 Product Introduction .................................................................................................. 1

Introduction .......................................................................................................................................................... 1

Key Feature ........................................................................................................................................................... 1

Specification .......................................................................................................................................................... 1

Dimension and Appearance Overview ................................................................................................................. 2

Cables Description ................................................................................................................................................ 2

Installation Requirements ..................................................................................................................................... 3

Chapter 2 Software Instruction ................................................................................................... 4

Device Connection ................................................................................................................................................ 4

2.1.1 Connection via Wi-Fi .................................................................................................................................. 4

2.1.2 Connection via RS-485 ............................................................................................................................... 5

Parameter Settings ............................................................................................................................................... 5

2.2.2 Read Software Version .............................................................................................................................. 6

2.2.3 Set Delay Time ........................................................................................................................................... 6

2.2.4 Detection Boundary ................................................................................................................................... 6

2.2.5 Set Radar Status ......................................................................................................................................... 7

Falling Indication ................................................................................................................................................... 7

Upgrade ................................................................................................................................................................ 7

Radar Network Configuration ............................................................................................................................... 9

Page 5

Fall Detection Radar User Manual

1

Chapter 1 Product Introduction

Introduction

Based on the 60 GHz frequency band, fall detection radar (hereinafter referred to as device) adopts FMCW, MIMO, beamforming, deep learning, and other technologies. It can obtain target information, including person location, speed, posture, etc., and can provide non-contact and non- privacy fall detection.

Key Feature

No privacy disclosure. High detection accuracy and low false alarm rate. Target tracking. Remote and non-contact posture detection. Small size, light, and easy installation.

Specification

Refer to the table below for the device specification.

DS-TDSB00-EKT/4m Fall Detection Radar Specification

Parameters Values

Working Frequency 60 to 64 GHz

Modulation Wave FMCW

Frequency Span 2 GHz

Horizontal FoV -45 to +45

Vertical FoV -45 to +45

Range Resolution 0.08 m

Detection Range 0.1 to 6 m

Speed Resolution 0.10 m/s

Data Cycle 70 ms

Communication Interface RS-485/Wi-Fi

Working Voltage 9 to 12 VDC

Working Electric Current 200 mA @ 12 VDC

Page 6

Fall Detection Radar User Manual

2

Dimension and Appearance Overview

Refer to the figures below for the device dimension and appearance overview.

Dimension (unit: mm)

Appearance

Cables Description

Refer to the table below for the cables description.

DS-TDSB00-EKT/4m Fall Detection Radar Cables Description

Consumption < 2.4 W

Working Temperature -40 C to +50 C (-40 F to +122 F)

No. Color Name Function

1 Red +12 V 12 VDC

2 Black GND Power ground

3 Green RS-485A RS-485 communication port

4 Blue RS-485B

5 Yellow OC controlled signal VOH/VOL controller

Page 7

Fall Detection Radar User Manual

3

Installation Requirements

Install the device on the wall at a height of 2 m. Make sure that the device is centered horizontally in the detection area and there is no obstruction in front of it. Refer to the figures below for the device installation overview.

DS-TDSB00-EKT/4m Radar Installation Overview

6 Brown GND Power ground

Page 8

Fall Detection Radar User Manual

4

Chapter 2 Software Instruction

Device Connection

You can connect the device via Wi-Fi or RS-485. Enter the corresponding information according to the different connection modes.

You can connect the radar via Wi-Fi.

Before You Start

Power on the radar (12 V).

Connect your computer to the radar AP hotspot.

SSID format: IRS60_xxxx.

Default password: abcd1234.

Use ping command to test if the computer is connected to the radar Wi-Fi.

1) Press the Win button and R button at the same time.

2) Enter cmd and click OK.

3) Enter ping 192.168.4.1 in the command line.

Open the IRS60-3 Radar PC tool and click On/OFF.

Set the network port parameters.

Page 9

Fall Detection Radar User Manual

5

IP address: 192.168.4.1.

Port No. : 20000.

Connection Setting

Click Confirm.

You can connect the radar via the serial port.

Open the IRS60-3 Radar PC tool.

Click Connection Settings.

Select Serial Port.

Select Port.

Set BaudRate as 115200, Stop bit as 1, and Data bit as 8. No parity.

Click Confirm.

Parameter Settings

Click Parameter Settings to view the radar firmware version and set the delay time and the radar detection area.

Page 10

Fall Detection Radar User Manual

6

Parameter Settings

Click Parameter Settings and click Get after SoftVersion to view the software version.

Go to Parameter Settings Delay Time to set the delay time. If the radar detects the target person fell and stood up within the set delay time, it will not alarm. Otherwise, it will report a falling alarm signal.

The radar only detects falling within the range of detection boundary.

Page 11

Fall Detection Radar User Manual

7

Detection Boundary

Click Parameter Settings to set the radar status.

Enter standby mode

The radar will be standby and stop emitting electromagnetic waves. If the radar is powered off and does not receive wakeup command after powered on again, then it will still be standby mode.

Awake

If the radar is powered off, the awake mode will be kept after it is powered on again.

Falling Indication

When the radar detects a person, the left icon will be highlighted. When the radar detects the target falls, the right icon will be highlighted.

Falling Indication

Upgrade

You can upgrade the firmware version.

Page 12

Fall Detection Radar User Manual

8

Open the IRS60-3 Radar PC tool.

Press F1 button on the keyboard.

Menu Page

Enter IP Address and Radar Port (IP address: 192.168.4.1; radar port: 6666).

Click Connect.

Click Browse to select the firmware to be upgraded.

Select Network Segment as the same network segment with radar and Mode as Auto.

Application Upgrade

Page 13

Fall Detection Radar User Manual

9

Click Confirm.

Click Start Update.

Upgrade

Radar Network Configuration

You can set the radar network.

Open IRS60-3 Radar PC tool.

Press F2 button on the keyboard.

Enter IP Address and Port (IP address: 192.168.4.1; port: 6666).

Page 14

Fall Detection Radar User Manual

10

Network Configuration

Click Connect.

Set Work Mode as 3.

Click Set.

Set AP (Router) SSID and AP (Router) PWD.

AP (Router) SSID means the router name. AP (Router) PWD means the router password.

Set DHCPC as 0.

Set IP, Netmask, and gateway.

Click Set.

Set AP SSID and AP PWD.

Page 15

Fall Detection Radar User Manual

11

AP SSID means the Wi-Fi name. AP PWD means the Wi-Fi password.

Set AP

Click Set.

Set Device ID as an integer (range: 1 to 999999999).

Page 16

Fall Detection Radar User Manual

12

Set Device Information

Set data report type as 0.

Set service IP as Hikcentral Pro service IP.

Set service PORT as 20000.

Set radar debug PORT as 6666.

Set radar Passthrough data PORT as 20000.

Set report interval as 1000.

Click Data Save.

Click Reboot.

Page 17

0

<

Manualsnet FAQs

If you want to find out how the DS-TDSB00-EKT Hikvision works, you can view and download the Hikvision DS-TDSB00-EKT Radar User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Hikvision DS-TDSB00-EKT as well as other Hikvision manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Hikvision DS-TDSB00-EKT. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Hikvision DS-TDSB00-EKT Radar User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Hikvision DS-TDSB00-EKT Radar User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Hikvision DS-TDSB00-EKT Radar User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Hikvision DS-TDSB00-EKT Radar User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikvision DS-TDSB00-EKT Radar User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.