Contents

Hikvision DS-TDSB00-EKH Radar User's Manual PDF

Download download
Hikvision DS-TDSB00-EKH Radar User's Manual PDF
Hikvision Radar DS-TDSB00-EKH User's Manual
Pages 17
Year 2022
Language(s)
English en
1 of 17
1 of 17

Summary of Content for Hikvision DS-TDSB00-EKH Radar User's Manual PDF

Page 1

0

Auxiliary Care Radar

User Manual

Page 2

Auxiliary Care Radar User Manual

I

Legal Information

2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information

hereinafter are for description and explanation only. The information contained in the Manual is subject to change,

without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision

website (https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks

and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS

HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION

MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY

QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO

EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,

INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,

CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT

(INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT,

EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION

SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES

RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,

HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE

FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING

THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT

LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY

RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR

PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR

BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR

FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.

Page 3

Auxiliary Care Radar User Manual

II

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol Description

Provides additional information to emphasize or supplement important points of the main text.

Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.

Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury.

Page 4

Auxiliary Care Radar User Manual

III

TABLE OF CONTENTS Chapter 1 Product Introduction .................................................................................................. 1

Introduction .......................................................................................................................................................... 1

Key Feature ........................................................................................................................................................... 1

Specification .......................................................................................................................................................... 1

Dimension and Appearance Overview ................................................................................................................. 2

Cables Description ................................................................................................................................................ 2

Installation Requirements ..................................................................................................................................... 3

Chapter 2 Software Instruction ................................................................................................... 4

Device Connection ................................................................................................................................................ 4

2.1.1 Connection via Wi-Fi .................................................................................................................................. 4

2.1.2 Connection via RS-485 ............................................................................................................................... 5

Parameter Settings ............................................................................................................................................... 5

2.2.2 Read Software Version .............................................................................................................................. 6

2.2.3 Edit Sub-Device Address ............................................................................................................................ 6

2.2.4 Select Report Mode ................................................................................................................................... 6

2.2.5 Set Radar Status ......................................................................................................................................... 7

Main Page ............................................................................................................................................................. 7

Upgrade ................................................................................................................................................................ 8

Radar Network Configuration ............................................................................................................................... 9

Page 5

Auxiliary Care Radar User Manual

1

Chapter 1 Product Introduction

Introduction

Based on the 60 GHz frequency band, auxiliary care radar (hereinafter referred to as device) adopts FMCW, MIMO, beamforming, micro-Doppler feature extraction, and other technologies. It can detect the vital signs, including person, breath, heartbeat, etc.

The device can be installed above the bed in the bedroom, and the non-contact detection will cover the bed. It can obtain the information, including the time in the bed, the time out of the bed, breath rate, heart rate, times of movements, etc., and help to analyze the sleep quality and health of the human body.

Key Feature

No privacy disclosure. Remote and non-contact detection. Outputs the real-time breath rate and heart rate of the human body. Detects and outputs the information that if the human body is in the bed to the connected

client software. Counts the time in the bed and the time out of the bed. Detects and outputs the human body movements to the connected client software, and counts

the times of movements. Small size, beautiful structure, and easy installation.

Specification

Refer to the table below for the device specification.

Specification

Parameters Values

Working Frequency 60 to 64 GHz

Modulation Wave FMCW

Frequency Span 3.5 GHz

Horizontal FoV -45 to +45

Vertical FoV -45 to +45

Range Resolution 0.0435 m

Detection Range 0.2 to 2.7 m

Breath/Heart Rate Resolution 0.08 Hz

Page 6

Auxiliary Care Radar User Manual

2

Dimension and Appearance Overview

Refer to the figures below for the device dimension and appearance overview.

Dimension (unit: mm)

Appearance

Cables Description

Refer to the table below for the cables description.

Data Cycle 50 ms

Communication Interface RS-485/Wi-Fi

Working Voltage 9 to 12 VDC

Working Electric Current 200 mA @ 12 VDC

Consumption < 2.4 W

Working Temperature -40 C to +50 C (-40 F to +122 F)

Page 7

Auxiliary Care Radar User Manual

3

Cables Description

Installation Requirements

Install the device on the ceiling above the bed and point it to the chest of the person on the bed. The arrow on the front shell of the radar should point to the end of the bed. Attach the wires to the wall. The valid detection range is up to 2 2 m bed. Refer to the figure below for the device installation overview.

Installation Overview

Set the device parameters and adjust the radar cover range according to the actual ceiling height.

No. Color Name Function

1 Red +12 V 12 VDC

2 Black GND Power ground

3 Green RS-485A RS-485 communication port

4 Blue RS-485B

5 Yellow OC controlled signal VOH/VOL controller

6 Brown GND Power ground

Page 8

Auxiliary Care Radar User Manual

4

Chapter 2 Software Instruction

Device Connection

You can connect the device via Wi-Fi or RS-485. Enter the corresponding information according to different connection modes.

You can connect the radar via Wi-Fi.

Before You Start

Power on the radar (12 V).

Connect your computer to the radar AP hotspot.

SSID format: IRS60_xxxx.

Default password: abcd1234.

Use ping command to test if the computer is connected to the radar Wi-Fi.

1) Press the WIN button and R button at the same time.

2) Enter cmd and click OK.

3) Enter ping 192.168.4.1 in the command line.

Open the IRS60-5 Radar PC tool and click On/OFF.

Set the network port parameters.

Page 9

Auxiliary Care Radar User Manual

5

IP address: 192.168.4.1.

Port: 20000.

Connection Setting

Click Confirm.

You can connect the radar via the serial port.

Open the software.

Enable On/OFF.

Select Serial Port.

Select Port.

Set BaudRate as 115200, Stop bit as 1, and Data bit as 8. No parity.

Set Radar Address.

Radar Address refers to the RS-485 communication sub-device address. 0 refers to the broadcast

address that covers all the sub-device.

Click Confirm.

Parameter Settings

Click to open the main page. You can read the radar firmware version, edit the RS-485 sub- device address, set the radar mode, algorithm parameters, and upload mode.

Page 10

Auxiliary Care Radar User Manual

6

The parameter 00-2.10; in algorithm parameters means that the distance from the radar to the

bed is 2.1 m. Edit the value according to the actual using environment.

Parameter Settings

Click and click Read after SoftVersion to read the software version.

Click , set the address code, and click Set to edit the sub-device address.

The address code range is 1 to 255. Make sure the device connected address is the sub-device

address or 0.

Click , select Report form mode, and click Set.

Start reporting

The radar will upload detection data for every 50 ms. This mode is for single radar debugging, and you do not need to search for every time.

Stop reporting

Page 11

Auxiliary Care Radar User Manual

7

The radar will not upload the detection data.

Report once

The radar will only upload data once for sub-device data searching in the RS-485 network.

The report mode will not be saved if the device is powered off. It will restore to the default mode

after re-powered on. The default mode varies with different software version.

Click to set the radar status.

Enter standby mode

The radar will be standby and stop transmitting. If the radar is powered off and does not receive wakeup command after powered on again, then it will still be standby mode.

Awake

If the radar is powered off, the awake mode will be kept after it is powered on again.

Main Page

After selected Report form mode as Start reporting, you can view the uploaded information on the main page. It includes the information of times of movements, get up alarm, the time in the bed, the time out of the bed, breath rate (times/minute), heart rate (times/minute), times of movements and if the human body is in the bed.

Main Page

Page 12

Auxiliary Care Radar User Manual

8

Upgrade

You can upgrade the firmware version.

Open the software.

Press F1 button on the keyboard.

Menu Page

Enter IP Address and Radar Port (IP address: 192.168.4.1; radar port: 6666).

Click Connect.

Click Browse to select the firmware to be upgraded.

Select Network Segment as the same network segment with radar and Mode as Auto.

Page 13

Auxiliary Care Radar User Manual

9

Application Upgrade

Click Confirm.

Click Start Update.

Upgrade

Radar Network Configuration

You can set the radar network.

Open IRS60-5 Radar PC tool.

Press F2 button on the keyboard.

Enter IP Address and Port (IP address: 192.168.4.1; port: 6666).

Page 14

Auxiliary Care Radar User Manual

10

Network Configuration

Click Connect.

Set Work Mode as 3.

Click Set.

Set AP (Router) SSID and AP (Router) PWD.

AP (Router) SSID means the router name. AP (Router) PWD means the router password.

Set DHCPC as 0 (off).

Set IP, Netmask, and gateway.

Click Set.

Set AP SSID and AP PWD.

Page 15

Auxiliary Care Radar User Manual

11

AP SSID means the Wi-Fi name. AP PWD means the Wi-Fi password.

Set AP

Click Set.

Set Device ID as an integer (range: 1 to 999999999).

Set Device Information

Page 16

Auxiliary Care Radar User Manual

12

Set data report type as 0.

Set service IP as Hikcentral Pro service IP.

Set service PORT as 20000.

Set radar debug PORT as 6666.

Set radar Passthrough data PORT as 20000.

Set report interval as 0.

Click Data Save.

Click Reboot.

Page 17

0

Manualsnet FAQs

If you want to find out how the DS-TDSB00-EKH Hikvision works, you can view and download the Hikvision DS-TDSB00-EKH Radar User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Hikvision DS-TDSB00-EKH as well as other Hikvision manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Hikvision DS-TDSB00-EKH. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Hikvision DS-TDSB00-EKH Radar User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Hikvision DS-TDSB00-EKH Radar User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Hikvision DS-TDSB00-EKH Radar User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Hikvision DS-TDSB00-EKH Radar User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikvision DS-TDSB00-EKH Radar User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.