Hikvision DS-PRP100 Radar Quick Start Guide PDF
Summary of Content for Hikvision DS-PRP100 Radar Quick Start Guide PDF
10 20 30 40 50 60 70 80 90 100
DS-PRP100 Security Radar
E N G L I S H
For detailed settings, scan the QR code to get the User Manual of Security Radar.
1. Download and install the iVMS-4200 client software. 2. Enter Device Management page, and click Online Device. Note: You should activate the device for the rst usage. Select the device in the Online Device List, click Activate, create a password to activate the device. Scan the QR code to get the User Manual of Security Radar. 3. Select the radar in the Online Device List. Click Add, enter parameters, set the port as 80, and check Import to Group. If the IP segment of the radar is not the same as the PCs, click Add in the Device for Management list and enter the radar IP address and other parameters in the pop-up window to add the radar. You need to set the port as 80 and check Import to Group. 4. Upload Map: In iVMS-4200 client software, enter E-map, select a radar group and click Add map to select a map. 5. Click Edit Scale, draw a path on the map and set the plotting scale. 6. Expand the device group in the list on the left, and drag the radar onto the map. 7. Move along the edge of the required monitoring led. Make sure the target sign (red arrow) is moving within the radar area (gray sector) shown on the added map. If the target sign is not within the sector, you need to adjust the mounting position or angle of the radar.
Power on the radar and make sure there is no large object in the monitoring area. Make the radar access into the Internet. The radar and the PC that runs the software should be in the same IP segment.
Test the radar after installation to make sure it is properly mounted.
1. In iVMS-4200 client software, select the radar on Device Management page and click to enter the conguration page.You can also enter the device IP address in the web browser to enter the conguration page. 2. Click Smart Rule Settings - Camera Linkage Settings. 3. Click + to add cameras to the radar. 4. Select a camera in the Camera IP Address list, and select the radar zone or the trigger line (or whole eld) in the Zone Linkage list or the Trigger Line list. 5. Add the camera to iVMS-4200 client software: In the client software, enter Device Management page, click Add in the Device for Management list, and enter the IP address, user name and password of the camera in the pop-up window.
1. Select a reference object about 50 m away from the speed dome. On the reference object, select a point whose altitude is the same as the speed domes. 2. Enter the IP address of the speed dome in the web browser to enter the web client. Adjust the PTZ buttons on the Live View page to make the reference object displayed in the image, and click to zoom in the reference object. 3. Click , and click the reference point to middle the point in the frame. 4. Enter Conguration - PTZ - Initial Position, and click Set to set the initial position.
Link the camera to the Zone
Before calibration, set the initial position of the speed dome to ensure the tracking accuracy.
1. In iVMS-4200 client software, enter Device Management page, click Group. Click Encoding Channels in the group of the radar. Click Import and check cameras to link with the radar. 2. In iVMS-4200 client software, enter E-map page, click Edit - Radar Settings - Master-slave Tracking Settings. 3. Click the live view window, select the linked camera needs to be calibrated, and double click the live view window to maximum it. 4. Select One-Point Calibration as the calibration mode. 5. Ask the calibration sta to move in the radar detection eld. Click the track of the calibrate sta, and the color of the selected track will change from red to white. 6. Ask the calibration sta to stand at the calibration point within 20 to 40 m directly in front of the radar. Note: The track disappears if the calibration sta is standing in the place for more than 7 s. If the calibration sta does not move to the calibration point when the track disappears, you need to ask the calibration sta to move again, and click the track of the calibration sta to continue the calibration. 7. Adjust the PTZ buttons on the right of the live view window to update the PTZ position: Click +/- to scale the calibration sta to a t size (The altitude of the calibration sta is about 2/3 of the altitude of the window), and adjust the PTZ to make the object align with the sign + at the center of the frame. (Click on the center of the calibration sta and the screen will automatically adjust.) 8. Click Add Calibration to add a calibration point. A green marker will be added on the calibration point. The radar position and the PTZ position will be displayed in the Info list. The tracking will be enabled after completing the settings will be checked. 9. Click Save.
Calibrate the Speed Dome
Initial Position settings
1. Attach the mounting bracket on the radar with four supplied screws. 2. Loosen the screws on both side of the bracket. 3. Adjust the angle of the radar. 4. Tighten the screws on both sides of the bracket to complete the installation.
1. Attach the mounting bracket on the radar with four supplied screws. 2. Loosen the screws on both sides of the bracket. 3. Adjust the angle of the radar. 4. Tighten the screws on both sides of the bracket to complete the installation.
a. Power Supply Indicator Solid Green: Detector Power on b. Fault Alarm Indicator Flashing Red: Fault Alarm Occurred Solid Green: Alarm Restored c. Zone Alarm Indicator Solid Red: Zone/Trigger Line Alarm Occurred Solid Green: Alarm Restored d. Formatting Indicator Red and Green LED Flashes 3 Times: Formatting Successfully
a. Alarm Output Wiring (4-Ch Weak Current Output) b. Alarm Input Wiring (Reserved) c. DC Power Supply Wiring d. Ethernet (PoE Port) Wiring e. Grounding
Loosen the screws on the rear cover to remove the cover. Hold the Reset button while powering the radar on until the red and green LED ashes 3 times.
Before You Start: The recommended installation height is 2.5 m. Make sure that the mounting surface is strong enough to withstand at least 50 N, as well as four times the weight of the device and the bracket.
1. In iVMS-4200 client software, enter E-map. 2. Click Edit - Radar Settings - Draw Zone Manually or Edit - Radar Settings - Draw Trigger Line - Trigger Line/Dual-trigger Line, and click to draw a zone or an trigger line on the radar detection area. 3. Right-click to nish drawing. 4. Set the parameters of the zone or trigger line in the pop-up window. Zone: Edit the zone parameters in the pop-up window. Click OK to nish the settings. Trigger Line: Set the rule of the line (left->right, left<-right, left<->right) and enter the distance (only for dual-trigger line). Click OK to nish the settings.
Add Zone or Trigger Line for the Radar
If the speed dome is installed together with the radar within 2 m horizontal, select the calibration mode as One-Point Calibration. Otherwise, set the calibration as Multi-Point Calibration and add 3 calibration points. (Calibration points need to be evenly distributed on the radar center line) For One-Point calibration, you can refer to the following steps, and see user manual for Multi-Point calibration.
Note: The trigger line is not allowed to be crossed.
Before the operation, you need to click Finish on the E-map page to exit the editing mode. Click the radar and click Disarm to disarm the radar.
Use only power supply listed below: Manufacturer: MOSO Power Supply Technology Co.,Ltd
COPYRIGHT 2019 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be Hikvision). This user manual (hereinafter referred to be the Manual) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual. About this Manual This Manual is applicable to the Security Radar. The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to rmware updates or other reasons. Please nd the latest version in the company website (https://www.hikvision.com/). Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specic battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info
This product operates in a European non-harmonised frequency band.
H H=h h
1 (-24.29,42) (12,25,34)
Before the operation, you need to disable the parking function. You also need to click Finish on the E-map page to exit the editing mode. Click the radar and click Disarm to disarm the radar.
FCC Information Please take attention that changes or modication not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation
Edit Map Edit Scale Radar Settings
Edit Map Edit Scale Radar Settings
Master-slave Tracking Settings
Model: MSA-C2000IC12.0-24P-GB,British standard MSA-C2000IC12.0-24P-DE,European standard MSA-C2000IC12.0-24P-US,American standard
Exception detection Tampering alarm Moving alarm
Power DC 12 V/2 A Operation temperature 40 C to 65 C Operation humidity 10% to 90% Dimension (W H D) DC 12 V IP level IP67 Weight 1.74kg
Bracket installation Installation height: 1.2m to 4m Recommended height: 2.5m
Model DS-PRP100 Detection range 100 m Horizontal angle 6.2 Distance measurement accuracy
Max. target number 5 Velocity range -8.8 to 8.8 m/s Trigger line 4 Zone 8
Relay output 4-ch weak current output: 0.5 A 125 VAC/1 A 30 VDC
Network interface 1 RJ45 10 M/100 M self-adaptive, supports POE
Standard ISAPI protocol, NAL2300 protocol, HTTP, DNS, NTP, TCP, UDP, DHCP, ARP and SSH
Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Cet
If you want to find out how the DS-PRP100 Hikvision works, you can view and download the Hikvision DS-PRP100 Radar Quick Start Guide on the Manualsnet website.
Yes, we have the Quick Start Guide for Hikvision DS-PRP100 as well as other Hikvision manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Quick Start Guide should include all the details that are needed to use a Hikvision DS-PRP100. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Hikvision DS-PRP100 Radar Quick Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Hikvision DS-PRP100 Radar Quick Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Hikvision DS-PRP100 Radar Quick Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Hikvision DS-PRP100 Radar Quick Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikvision DS-PRP100 Radar Quick Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.