Hikvision DS-PR1-60 Radar Quick Start Guide PDF

Pages 1
Year 2018
English en
1 of 1
1 of 1

Summary of Content for Hikvision DS-PR1-60 Radar Quick Start Guide PDF

DS-PR1-60 Security Radar

Diagram References




Set up via Web Client Input the device IP address in the address bar of the web browser. Enter the user name and password to log into the web client. For detailed settings, refer to Security Control Panel User Manual.

1. Download and install the iVMS-4200 client. 2. Enter Control Panel-Modules Customization, select Radar, and click OK. 3. Enter Device Management page, select the detector in the Online Device List, click Edit Network Settings, change the port as 80, and click Add to Client. If the network of the radar is not the same as the PCs, click Add Device and enter the radar IP address in the popup window to add the radar.

4. In iVMS-4200 client software, enter Control Panel-Radar. 5. Upload Map: Select a map, enter the actual width(m) and height(m) of the map. 6. Select the radar detector on the left, click and drag the detector onto the map. 7. Move along the edge of the required monitoring led. Make sure the target sign (red arrow) is moving withhin the radar area(gray sector) shown on the added map. If the target sign is not within the sector, you need to adjust the mounting position or angle of the radar.

Power on the radar and make sure there is no large object in the monitoring area. Make the detector access into the internet.

Test the radar after installation to make sure it is properly mounted.

1. Enter Remote Conguration-Smart Rule Settings-Camera Linkage Settings. 2. Click + to add cameras to the radar. Select a speed dome in the Camera List, and select a radar zone (or whole eld) in the Zone Linkage list.

1. Select a reference object about 50m away from the speed dome, and select a point (on the reference object) whose altitude is the same as the speed domes. 2. Enter the IP address of the speed dome in the web broswer to enter the web client. Adjust the PTZ in the live view page to make the point dislayed in the frame. Click 3D Zoom to middle the point in the frame. 3. Enter Conguration-PTZ-Initial Position, and click Set to set the initial position.

Add a Speed Dome for a Zone

Set the initial position of the speed dome to ensure the tracking accuracy.

1. On the Radar page, click ... - to enter the Master-Slave Tracking Settings page . 2. Select the radar detector and a speed dome on the left. The realtime scene of the speed dome will be displayed. 3. Click and select a coordinate in the Calibration Position list on the right. Adjust the PTZ to make the target to the center of the liveview window alligning with sign +, and click zoom+/- to scale the target to a t size. Click the coordinate again, the radar and PTZ coordinate of the target show in the list , and a target sign + shows on the radar detection area. 4. Adjust the PTZ of the speed dome, align the center sign + with the target in the scene,

Calibrate the Speed Dome

Calibrate the Speed Dome

Set Initial Position

Enable Speed Dome Tracking 1. On the Master-Slave Tracking Settings page, Click Tracking. 2. Check Enable Tracking.







Set up via 4200 Client Scan the QR code to get the user manual. Set Up6


1. Attach the mounting bracket on the detector with four supplied screws. 2. Loosen the screws on both side of the bracket. 3. Adjust the angle of the detector. 4. Tighten the screws on the both side of the bracket to complete the installation.

1. Attach the mounting bracket on the detector with four supplied screws. 2. Loosen the screws on both side of the bracket. 3. Adjust the angle of the detector. 4. Tighten the screws on the both side of the bracket to complete the installation.

a. Power Supply Indicator Solid Green: Detector Power on

b. Fault Alarm Indicator Flashing Red: Fault Alarm Occurred, Solid Green: Alarm Restored

c. Zone Alarm Indicator Solid Red: Zone Alarm Occurred, Solid Green: Alarm Restored

d. Formatting Indicator Flashing Red: Formatting Successfully

a. Alarm Output Wiring(Dry Contact Output ) a1: One Strong Current Output a2: Three Weak Current Output b. Alarm Input Wiring(Reserved) c. Power Supply Wiring d. Network Wiring (supports PoE) e. Grounding

Loosen the screws on the rear cover to remove the cover. Hold the Reset button while powering the radar on until the red and green LED ashes.

Ceiling Mounting

Pole Mounting

Before You Start: The recommended installation height is 2.5m. Make sure that the mounting surface is strong enough to withstand at least 50N, as well as four times the weight of the device and the bracket.

1. In iVMS-4200 client software, enter Control Panel-Radar. 2. Click ...- Draw a Zone Manually, draw a zone on the radar detection area, enter the zone name ,and select a zone type(warning zone, early warning zone, or disabled zone). You can also click ...- Draw a Zone Automatically, and get a zone by walking on the real monitoring area.

Add Zone for the Detector

Note: Set at least four equally distributed calibration positions if the speed dome is not installed together with the radar.

Note: You should activate the device for the rst usage. Select the device in the Online Device List, click Activate, create a password to activate the device. Scan the QR code to get the security radar user manual.







Use only power supply listed below: Manufacturer: Shenzhen HONOR Electronic Co., Ltd. ModelADS-26FSG-12 12024EPG

COPYRIGHT 2018 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be Hikvision). This user manual (hereinafter referred to be the Manual) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual. About this Manual This Manual is applicable to the Security Radar. The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to rmware updates or other reasons. Please nd the latest version in the company website (http://overseas.hikvision.com/en/). Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.

Product Information

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specic battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info

This product operates in a European non-harmonised frequency band.

1 3




22 8.



2 a













a 1









1 2

1 (-24.29,42) (12,25,34)

1 (-19.79,34) (31,43,17)

1 2



09-29-2018 16:50:20



09-29-2018 16:51:22

09-29-2018 16:51:22


H H=h h

Initial Position

09-29-2018 16:52:07

a b










Model DS-PR1-60 Detection Range 60 m Horizontal Angle 100 Detection Area About 3000 Max. Target Number 32 Velocity Range -8.7 to 8.7 m/s Range Measurement Accuracy

0.75 m

Velocity Measurement Accuracy

0.1 m/s

Angle Measurement Accuracy


Zone 8 3-ch weak current output: 0.5 A/125 VAC,breakdown voltage: 1 KV 1-ch strong current output: 10 A/240 VAC,breakdown voltage: 2.5 KV

Alarm Output


Netowrk Interface 1 RJ45 10M/100M self-adaptive, supports POE

Communication Protocol

Standard ISAPI protocol, NAL2300 protocol HTTP, DNS, NTP, TCP, UDP, DHCP, ARP, and SSH

Exception Detection Cover and Wall tamper-proof, and blocking alarm

Power Interface

Manualsnet FAQs

If you want to find out how the DS-PR1-60 Hikvision works, you can view and download the Hikvision DS-PR1-60 Radar Quick Start Guide on the Manualsnet website.

Yes, we have the Quick Start Guide for Hikvision DS-PR1-60 as well as other Hikvision manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Start Guide should include all the details that are needed to use a Hikvision DS-PR1-60. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Hikvision DS-PR1-60 Radar Quick Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Hikvision DS-PR1-60 Radar Quick Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Hikvision DS-PR1-60 Radar Quick Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Hikvision DS-PR1-60 Radar Quick Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikvision DS-PR1-60 Radar Quick Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.