Hikvision DS-KP8000-HE1 Phone User's Manual PDF

1 of 131
1 of 131

Summary of Content for Hikvision DS-KP8000-HE1 Phone User's Manual PDF

DS-KP8000-HE1,DS-KP8000-WHE1

user manal

3

Directory

Directory .............................................................................................................................................................................. 3

1 Picture .............................................................................................................................................................................. 8

2 Table ............................................................................................................................................................................... 12

3 Safety Instruction........................................................................................................................................................... 13

4 Overview ......................................................................................................................................................................... 14

4.1 Overview ............................................................................................................................................................. 14

4.2 Packing Contents ................................................................................................................................................ 14

5 Desktop Installation ....................................................................................................................................................... 16

5.1 PoE and the use of external power adapters ............................................................................................... 16

5.2 Desktop and wall mounted method ..................................................................................................................... 17

6 Appendix Table .............................................................................................................................................................. 19

6.1 Appendix I - Icon .............................................................................................................................................. 19

6.2 Appendix II - Keyboard character query table ............................................................................................. 19

6.3 Appendix III LED Definition .......................................................................................................................... 21

7 Introduction to the User ................................................................................................................................................ 22

7.1 Key description ................................................................................................................................................... 22

7.2 Using Handset / Hands-free Speaker / Headphone ................................................................................... 24

7.3 Idle Screen ........................................................................................................................................................ 24

7.4 Phone Status .................................................................................................................................................... 25

7.5 Making Phone Calls ......................................................................................................................................... 27

7.6 Web Management ............................................................................................................................................ 29

7.7 SIP Configurations ........................................................................................................................................... 31

8 Basic Function ................................................................................................................................................................ 33

8.1 Answering Calls ................................................................................................................................................ 33

8.1.1 Talking ...................................................................................................................................................... 33

8.1.2 Make / Receive Second Call ................................................................................................................. 34

8.2 End of the Call ................................................................................................................................................. 35

8.3 Redial ................................................................................................................................................................ 35

8.4 Dial-up Query .................................................................................................................................................... 36

8.5 Auto-Answering ................................................................................................................................................ 36

8.6 Callback ............................................................................................................................................................. 37

8.7 Mute ................................................................................................................................................................... 38

8.7.1 Mute the Call ........................................................................................................................................... 38

8.7.2 Ringing Mute ........................................................................................................................................... 39

4

8.8 Call Hold/Resume ............................................................................................................................................ 40

8.9 DND .................................................................................................................................................................... 40

8.10 Call Forward .................................................................................................................................................... 42

8.11 Call Transfer ................................................................................................................................................... 44

8.11.1 Blind transfer ......................................................................................................................................... 45

8.11.2 Semi-Attended transfer ....................................................................................................................... 45

8.11.3 Attended transfer .................................................................................................................................. 46

8.12 Call Waiting .................................................................................................................................................... 46

8.13 Conference ..................................................................................................................................................... 48

8.13.1 Local Conference ................................................................................................................................. 48

8.13.2 Network Conference ............................................................................................................................ 49

8.14 Call Park .......................................................................................................................................................... 49

8.15 Pick Up............................................................................................................................................................. 50

8.16 Anonymous Call ............................................................................................................................................ 51

8.16.1 Anonymous Call ................................................................................................................................... 51

8.16.2 Ban Anonymous Call ........................................................................................................................... 53

8.17 Hotline ............................................................................................................................................................. 53

8.18 Emergency Call ............................................................................................................................................. 54

9 Advance Function .......................................................................................................................................................... 56

9.1 BLF (Busy Lamp Field) ................................................................................................................................... 56

9.1.1 Configure the BLF Functionality ........................................................................................................... 56

9.1.2 Use the BLF Function ............................................................................................................................ 57

9.2 BLF List .............................................................................................................................................................. 58

9.3 Record ............................................................................................................................................................... 59

9.3.1 Server Record ......................................................................................................................................... 59

9.3.2 SIP INFO Record .................................................................................................................................... 59

9.4 Agent ................................................................................................................................................................. 59

9.5 Intercom ............................................................................................................................................................ 61

9.6 MCAST .............................................................................................................................................................. 62

9.7 SCAShared Call Appearance ...................................................................................................................... 63

9.8 Message ........................................................................................................................................................... 66

9.8.1 SMS .......................................................................................................................................................... 66

9.8.2 MWIMessage Waiting Indicator ....................................................................................................... 66

9.9 SIP Hotspot ...................................................................................................................................................... 68

10 Phone Settings .......................................................................................................................................................... 71

10.1 Basic Settings ................................................................................................................................................ 71

10.1.1 Language ............................................................................................................................................... 71

10.1.2 Time & Date .......................................................................................................................................... 72

5

10.1.3 Screen .................................................................................................................................................... 73

10.1.3.1 Brightness and backlight .......................................................................................................... 74

10.1.3.2 Screen Saver ............................................................................................................................. 74

10.1.4 Ring ........................................................................................................................................................ 74

10.1.5 Voice Volume ........................................................................................................................................ 75

10.1.6 Greeting Words..................................................................................................................................... 75

10.1.7 Reboot.................................................................................................................................................... 75

10.2 Phone Book .................................................................................................................................................... 75

10.2.1 Local Contact ........................................................................................................................................ 75

10.2.1.1 Add / Edit / Delete Contact ...................................................................................................... 76

10.2.1.2 Add / Edit / Delete Group ......................................................................................................... 77

10.2.1.3 Browse and Add / Remove Contacts in Group ..................................................................... 78

10.2.2 Blacklist .................................................................................................................................................. 78

10.2.3 Cloud Phone Book ............................................................................................................................... 79

10.2.3.1 Configure Cloud Phone book .................................................................................................. 79

10.2.3.2 Downloading Cloud Phone book ............................................................................................ 80

10.3 Call Log ........................................................................................................................................................... 80

10.4 Function Key .................................................................................................................................................. 82

10.5 Wi-Fi ................................................................................................................................................................ 83

10.6 Headset........................................................................................................................................................... 83

10.6.1 Wired Headset ...................................................................................................................................... 83

10.6.2 EHS Headset ........................................................................................................................................ 84

10.7 Advanced ........................................................................................................................................................ 84

10.7.1 Line Configurations .............................................................................................................................. 84

10.7.2 Network Settings .................................................................................................................................. 85

10.7.2.1 Network Settings ....................................................................................................................... 85

10.7.2.2 QoS & VLAN .............................................................................................................................. 87

10.7.2.3 VPN ............................................................................................................................................. 88

10.7.2.4 Web Server Type ...................................................................................................................... 89

10.7.3 Set The Secret Key .............................................................................................................................. 89

10.7.4 Maintenance .......................................................................................................................................... 92

10.7.5 Firmware Upgrade ............................................................................................................................... 95

10.7.6 Factory Reset ........................................................................................................................................ 98

11 Web Configurations ................................................................................................................................................. 99

11.1 Web Page Authentication ............................................................................................................................ 99

11.2 System >> Information ................................................................................................................................. 99

11.3 System >> Account ....................................................................................................................................... 99

11.4 System >> Configurations ............................................................................................................................ 99

6

11.5 System >> Upgrade .................................................................................................................................... 100

11.6 System >> Auto Provision .......................................................................................................................... 100

11.7 System >> Tools.......................................................................................................................................... 100

11.8 System >> Reboot Phone .......................................................................................................................... 100

12 Network >> Basic....................................................................................................................................................... 101

12.1 Network >> Wi-Fi Settings ........................................................................................................................... 101

12.2 Network >> Service Port ............................................................................................................................ 102

12.3 Network >> VPN .......................................................................................................................................... 103

12.4 Network >> Advanced ................................................................................................................................ 103

12.5 Line >> SIP ................................................................................................................................................... 103

12.6 Line >> SIP Hotspot .................................................................................................................................... 108

12.7 Line >> Dial Plan ......................................................................................................................................... 108

12.8 Line >> Action Plan ..................................................................................................................................... 111

12.9 Line >> Basic Settings ................................................................................................................................ 111

12.10 Line >> RTCP-XR ..................................................................................................................................... 112

12.11 Phone settings >> Features .................................................................................................................... 112

12.12 Phone settings >> Media Settings .......................................................................................................... 116

12.13 Phone settings >> MCAST ...................................................................................................................... 117

12.14 Phone settings >> Action ......................................................................................................................... 117

12.15 Phone settings >> Time/Date .................................................................................................................. 117

12.16 Phone settings >> Tone ........................................................................................................................... 118

12.17 Phone settings >> Advanced .................................................................................................................. 119

12.18 Phonebook >> Contact ............................................................................................................................ 119

12.19 Phonebook >> Cloud phonebook ........................................................................................................... 120

12.20 Phonebook >> Call List ............................................................................................................................ 121

12.21 Phonebook >> Web Dial .......................................................................................................................... 121

12.22 Phonebook >> Advanced ........................................................................................................................ 121

12.23 Call Log ....................................................................................................................................................... 122

12.24 Function Key >> Side Key ........................................................................................................................ 122

12.25 Function Key >> Softkey .......................................................................................................................... 123

12.26 Function Key >> Advanced ..................................................................................................................... 124

12.27 Application >> Manage Recording .......................................................................................................... 124

12.28 Security >> Web Filter .............................................................................................................................. 124

12.29 Security >> Trust Certificates .................................................................................................................. 125

12.30 Security >> Device Certificates ............................................................................................................... 125

12.31 Security >> Firewall ................................................................................................................................... 126

12.32 Device Log >> Device Log ...................................................................................................................... 128

13 Trouble Shooting ....................................................................................................................................................... 129

7

13.1 Get Device System Information ................................................................................................................ 129

13.2 Reboot Device ............................................................................................................................................. 129

13.3 Reset Device to Factory Default ............................................................................................................... 129

13.4 Screenshot ................................................................................................................................................... 129

13.5 Network Packets Capture .......................................................................................................................... 130

13.6 Get Log Information .................................................................................................................................... 131

13.7 Common Trouble Cases ............................................................................................................................ 131

8

1 Picture

Picture 1 - Device installation .......................................................................................................................... 17

Picture 2 - Wall-mounted installation ............................................................................................................... 18

Picture 3 - Connecting to the Device .......................................................................................................... 18

Picture 4 - X3V Instruction of Keypad .......................................................................................................... 22

Picture 5 - Screen layout/default home screen ................................................................................................. 24

Picture 6 - Scroll icon .................................................................................................................................... 25

Picture 7 - The Phone status ............................................................................................................................. 26

Picture 8 - WEB phone status .......................................................................................................................... 27

Picture 9 - Default line ..................................................................................................................................... 28

Picture 10 - Enable voice channel dialing ........................................................................................................ 28

Picture 11 - Open the voice channel and dial the number ................................................................................... 29

Picture 12 - Call number ............................................................................................................................... 29

Picture 13 - Landing page ................................................................................................................................ 30

Picture 14 - Phone line SIP address and account information .......................................................................... 31

Picture 15 - Web SIP registration ..................................................................................................................... 32

Picture 16 - Answering calls ............................................................................................................................ 33

Picture 17 - Talking interface ........................................................................................................................... 33

Picture 18 - The second call interface .............................................................................................................. 34

Picture 19 - Two way calling ......................................................................................................................... 35

Picture 20 - Redial set ...................................................................................................................................... 36

Picture 21 - Line 1 enables auto-answering .................................................................................................. 36

Picture 22 - The line has enabled auto-answering ............................................................................................ 37

Picture 23 - Web page to start auto-answering ................................................................................................. 37

Picture 24 - Set the callback key on the phone................................................................................................. 38

Picture 25 - Set the callback key on the web page ........................................................................................... 38

Picture 26 - Mute the call ................................................................................................................................. 39

Picture 27 - Ringing mute ................................................................................................................................ 39

Picture 28 - Call hold interface ........................................................................................................................ 40

Picture 29 - Enable DND ................................................................................................................................. 40

Picture 30 - DND setting interface ................................................................................................................ 41

Picture 31 - DND timer .................................................................................................................................... 41

Picture 32 - DND Settings ................................................................................................................................ 42

Picture 33 - Line DND ..................................................................................................................................... 42

Picture 34 - Select the line to set up call forwarding ........................................................................................ 43

Picture 35 - Select call forward type ................................................................................................................ 43

Picture 36 - Enable call forwarding and configure the call forwarding number .............................................. 44

9

Picture 37 - Set call forward ............................................................................................................................. 44

Picture 38 - Transfer interface .......................................................................................................................... 45

Picture 39 - Semi-Attended transfer ................................................................................................................. 46

Picture 40 - Attended transfernen ................................................................................................................... 46

Picture 41 - Call waiting setting ....................................................................................................................... 47

Picture 42 - Web call waiting setting ................................................................................................................ 47

Picture 43 - Web call waiting tone setting ........................................................................................................ 47

Picture 44 - Local conference setting ............................................................................................................... 48

Picture 45 - Local conference (1) ..................................................................................................................... 48

Picture 46 - Local conference (2) ..................................................................................................................... 49

Picture 47 - Network conference ...................................................................................................................... 49

Picture 48 - Phone set call park ........................................................................................................................ 50

Picture 49 - WEB set call park ....................................................................................................................... 50

Picture 50 - Phone pick up setting .................................................................................................................... 51

Picture 51 - WEB pick up setting ..................................................................................................................... 51

Picture 52 - Enable anonymous call .............................................................................................................. 52

Picture 53 - Enable Anonymous web page call .............................................................................................. 52

Picture 54 - Anonymous call log ...................................................................................................................... 52

Picture 55 - Anonymous calls are not allowed on the phone ........................................................................... 53

Picture 56 - Page Settings blocking anonymous call ....................................................................................... 53

Picture 57 - Phone hotline setting interface................................................................................................... 54

Picture 58 - Hotline set up on webpage ............................................................................................................ 54

Picture 59 - Set up an emergency call number ................................................................................................. 55

Picture 60 - Dial the emergency number .......................................................................................................... 55

Picture 61 - Web page configuration BLF function key ................................................................................... 56

Picture 62 - Phone configuration BLF function key ..................................................................................... 57

Picture 63 - Configure the BLF List functionality ........................................................................................... 58

Picture 64 - BLF List number display ........................................................................................................... 58

Picture 65 - Web server recording .................................................................................................................... 59

Picture 66 - Web SIP info recording ................................................................................................................. 59

Picture 67 - Configure the agent account in normal mode ............................................................................... 60

Picture 68 -Configure the proxy account-hotel Guest mode ............................................................................ 60

Picture 69 - Agent logon page ....................................................................................................................... 61

Picture 70 - Web Intercom configure ............................................................................................................... 61

Picture 71 - Multicast Settings Page ................................................................................................................ 63

Picture 72 - Register BroadSoft account .......................................................................................................... 63

Picture 73 - Set BroadSoft server ..................................................................................................................... 64

Picture 74 - Enable SCA ................................................................................................................................ 64

10

Picture 75 - Set Private Hold Function Key ..................................................................................................... 65

Picture 76 - SMS ........................................................................................................................................... 66

Picture 77 - New Voice Message Notification ................................................................................................. 67

Picture 78 - Voice message interface ................................................................................................................ 68

Picture 79 - Configure voicemail number ..................................................................................................... 68

Picture 80 -SIP hotspot ..................................................................................................................................... 69

Picture 81 - SIP hotspot server configuration ................................................................................................... 69

Picture 82 - SIP hotspot client configuration ................................................................................................... 70

Picture 83 - Phone language setting .............................................................................................................. 71

Picture 84 - Language setting on Web page ..................................................................................................... 71

Picture 85 - Set time & date on phone ............................................................................................................. 72

Picture 86 - Set time & date on webpage ....................................................................................................... 72

Picture 87 - Set screen parameters on phone .................................................................................................. 74

Picture 88 - Page screen Settings ................................................................................................................... 74

Picture 89 - Phone screen saver ..................................................................................................................... 74

Picture 90 - Phone book screen ...................................................................................................................... 76

Picture 91 - Local Phone book ....................................................................................................................... 76

Picture 92 - Add New Contact ....................................................................................................................... 77

Picture 93 - Group List .................................................................................................................................. 78

Picture 94 - Browsing Contacts in a Group ...................................................................................................... 78

Picture 95 - Add Contacts in a Group ............................................................................................................ 78

Picture 96 - Add Blacklist ................................................................................................................................ 79

Picture 97 - Web Blacklist .............................................................................................................................. 79

Picture 98 - Cloud phone book list ................................................................................................................... 80

Picture 99 - Downloading Cloud Phone book ................................................................................................ 80

Picture 100 - Call Log .................................................................................................................................... 81

Picture 101 - Filter call Log types .................................................................................................................... 81

Picture 102 - DSS LCD key Page Configuration Screen ................................................................................. 82

Picture 103 - DSS settings .............................................................................................................................. 83

Picture 104 - WIFI settings .............................................................................................................................. 83

Picture 105 - Headset function settings ............................................................................................................ 84

Picture 106 - EHS Headset setting .............................................................................................................. 84

Picture 107 - SIP address and account information.................................................................................. 85

Picture 108 - Configure Advanced Line Options ....................................................................................... 85

Picture 109 - Network mode Settings.......................................................................................................... 85

Picture 110 - DHCP network mode.............................................................................................................. 86

Picture 111 - PPPoE network mode ............................................................................................................ 86

Picture 112 - Static IP network mode .......................................................................................................... 87

11

Picture 113 - IPv6 Static IP network mode ................................................................................................. 87

Picture 114 - The phone configures the web server type ......................................................................... 89

Picture 115 - Keypad lock password ........................................................................................................... 90

Picture 116 - Keypad lock password ........................................................................................................... 90

Picture 117 - Phone keypad lock password input interface ..................................................................... 91

Picture 118 - Set keyboard lock password ............................................................................................... 91

Picture 119 - Phone keypad lock password input interface ..................................................................... 92

Picture 120 - Web keyboard lock password Settings ............................................................................... 92

Picture 121 - Page auto provision Settings ................................................................................................ 93

Picture 122 - Phone auto provision settings .............................................................................................. 93

Picture 123 - Web page firmware upgrade ................................................................................................. 96

Picture 124 - Firmware upgrade information display ................................................................................ 96

Picture 125 - Network Priority .................................................................................................................... 101

Picture 126 - WiFi Settings ............................................................................................................................ 102

Picture 127 - Service Port Settings............................................................................................................ 102

Picture 128 - Dial plan settings .................................................................................................................. 108

Picture 129 - Custom setting of dial - up rules ......................................................................................... 109

Picture 130 - Dial rules table (1) ................................................................................................................ 110

Picture 131 - Dial rules table (2) ................................................................................................................ 111

Picture 132 - Tone settings on the web ..................................................................................................... 119

Picture 133 - Web cloud phone book Settings ......................................................................................... 121

Picture 134 - Global Key Settings .............................................................................................................. 124

Picture 135 - Web Filter settings ................................................................................................................ 124

Picture 136 - Web Filter Table .................................................................................................................... 125

Picture 137 - Certificate of settings............................................................................................................ 125

Picture 138 - Device certificate setting...................................................................................................... 126

Picture 139 - Network firewall Settings ..................................................................................................... 126

Picture 140 - Firewall Input rule table ........................................................................................................ 127

Picture 141 - Delete firewall rules .............................................................................................................. 128

Picture 142 - Screenshot............................................................................................................................. 130

Picture 143 - Web capture .......................................................................................................................... 130

12

2 Table

Table 1 - Hardware Interface Description ........................................................................................................ 18

Table 2 - Keypad Icons.................................................................................................................................. 19

Table 3 - Look-up Table of Characters .......................................................................................................... 19

Table 4 - DSS KEY LED State ...................................................................................................................... 21

Table 5 - X3V Instruction of Keypad ............................................................................................................. 22

Table 6 - BLF Function key subtype parameter list ......................................................................................... 57

Table 7 - Agency mode ................................................................................................................................. 60

Table 8 - Intercom configure ......................................................................................................................... 62

Table 9 - MCAST Parameters on Web ............................................................................................................. 63

Table 10 - LED Status of SCA ......................................................................................................................... 65

Table 11 - SIP hotspot Parameters .................................................................................................................... 69

Table 12 - Time Settings Parameters .............................................................................................................. 72

Table 13 - QoS & VLAN ................................................................................................................................. 88

Table 14 - Auto Provision .............................................................................................................................. 93

Table 15 - Firmware upgrade ........................................................................................................................ 96

Table 16 - Service port ................................................................................................................................. 102

Table 17 - Line configuration on the web page .............................................................................................. 103

Table 18 - Phone dialing methods ............................................................................................................... 108

Table 19 - Dial - up rule configuration table .................................................................................................. 109

Table 20 - IP camera ..................................................................................................................................... 111

Table 21 - Set the line global configuration on the web page ...................................................................... 111

Table 22 - VQ RTCP-XR Settings ................................................................................................................. 112

Table 23 - General function Settings .............................................................................................................. 112

Table 24 - Voice settings ................................................................................................................................ 116

Table 25 - Multicast parameters ..................................................................................................................... 117

Table 26 - Time&Date settings ..................................................................................................................... 117

Table 27 - Side Key configuration ............................................................................................................... 122

Table 28 - Softkey configuration .................................................................................................................. 123

Table 29 - Network Firewall ........................................................................................................................ 127

Table 30 - Trouble Cases ................................................................................................................................ 131

13

3 Safety Instruction

Please read the following safety notices before installing or using this unit. They are crucial for the safe and

reliable operation of the device.

Please use the external power supply that is included in the package. Other power supply may cause

damage to the phone and affect the behavior or induce noise.

Before using the external power supply in the package, please check the home power voltage.

Inaccurate power voltage may cause fire and damage.

Please do not damage the power cord. If power cord or plug is impaired, do not use it because it may

cause fire or electric shock.

Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.

This phone is designed for indoor use. Do not install the device in places where there is direct sunlight.

Also do not put the device on carpets or cushions. It may cause fire or breakdown.

Avoid exposure the phone to high temperature or below 0 or high humidity.

Avoid wetting the unit with any liquid.

Do not attempt to open it. Non-expert handling of the device could damage it. Consult your authorized

dealer for help, or else it may cause fire, electric shock and breakdown.

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it. Wipe it with a soft cloth

that has been slightly dampened in a mild soap and water solution.

When lightning, do not touch power plug, it may cause an electric shock.

Do not install this phone in an ill-ventilated place. You are in a situation that could cause bodily injury.

Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be

familiar with standard practices for preventing accidents.

14

4 Overview

4.1 Overview

X3V is a low-end WIFI product phone, with advanced design, high cost performance, paperless office, which

greatly improves the production efficiency of the enterprise; not only a desk phone, but also a boutique placed

in the living room or office .

X3V, which are the latest generation of IP phone developed on the basis of the X series, inheriting many

excellent features of the previous X series traditional phone, such as high-definition voice, headphones and

high-performance echo cancellation full duplex speaker, fast / gigabit Ethernet, QoS, encryption transmission,

automatic configuration, new system, smooth operation, flat interface settings and many other advantages.

For enterprise users,while realizing environmental protection, they also provide convenient operation. Users

can flexibly configure and define the functions of two DSS keys, space saving and cost. It will be an ideal

choice for enterprise users and family users who pursue the high quality and high efficiency.

In order to help some interested users better understand the details of the product, this user manual can be

used as a reference guide for the use of X3V series. This document may not be applicable to the latest

version of the software. If you have any questions, you can use the help prompt interface of the device phone,

or download and update your user manual from the official website.

4.2 Packing Contents

Phone Handset

15

Receiver cable Stand Network cable

Power adapter (Optional) Hanging bracke (Need another purchase)

16

5 Desktop Installation

5.1 PoE and the use of external power adapters

The devices support two power supply modes from external power adapter or over Ethernet (PoE)

complied switch.

PoE power supply saves the space and cost of providing the device additional power outlet. With a PoE

switch, the device can be powered through a single Ethernet cable which is also used for data transmission.

By attaching UPS system to PoE switch, the device can keep working at power outage just like traditional

PSTN telephone which is powered by the telephone line.

For users who do not have PoE equipment, the traditional power adaptor should be used. If the device is

connected to a PoE switch and power adapter at the same time, the power adapter will be used in priority and

will switch to PoE power supply once it fails.

Please use the power adapter supplied and the PoE switch met the specifications to ensure the device to

work properly.

17

5.2 Desktop and wall mounted method

The device supports two installation modes, desktop and wall mounted.If the phone is on the desktop, please

follow the instructions in the picture below to install the phone.

Picture 1 - Device installation

If the phone is mounted on the wall, please follow the instructions below to install it.

18

Picture 2 - Wall-mounted installation

Connect the power adapter, network, PC, phone and earphone to the appropriate port as shown in the picture

below.

Picture 3 - Connecting to the Device

Table 1 - Hardware Interface Description

Index Interface Description

Power Interface Connecting Power Adapter

Network Interface Connecting to LAN or Internet

PC Port Network Interface for Connecting Computer

Headset Interface Connecting Headset

Receiver Interface Connecting Microphone Receiver

19

6 Appendix Table

6.1 Appendix I - Icon

Table 2 - Keypad Icons

Redial

Phone Book

Hands-free (HF) speaker

Mute Microphone (During Call)

Volume down

Volume up

Hold

Headset

MWI

Conference

Transfer

Call log

Redial

6.2 Appendix II - Keyboard character query table

Table 3 - Look-up Table of Characters

Mode Icon Text Mode Key Button Characters Of Each Press

Numeric

1 1

2 2

3 3

4 4

5 5

6 6

7 7

8 8

9 9

0 0

*.+

# #

20

Lower Case

Alphabets

1 @:;()<>

2 a b c

3 d e f

4 g h i

5 j k l

6 m n o

7 p q r s

8 t u v

9 w x y z

0 (space)

.,*/+-:_=

# # ^!&$%

Upper Case

Alphabets

1 @:;()<>

2 A B C

3 D E F

4 G H I

5 J K L

6 M N O

7 P Q R S

8 T U V

9 WZYX

0 (space)

.,*/+-:_=

# # ^!&$%

Mixed type input

1 1

2 2 a b c A B C

3 3 d e f D E F

4 4 g h I G H I

5 5 j k l J K L

6 6 m n o M N O

7 7 p q r s P Q R S

8 8 t u v T U V

9 9 w z y x W Z Y X

0 0

.,*/+-:_=

# # ^!&$%

21

6.3 Appendix III LED Definition

Table 4 - DSS KEY LED State

Type LED Light State

Line Key

Off Line inactive

Green On Line ready (Registered)

Green Blinking Ringing

Red Blinking Line is trying to register

Red Blinking Line error (Registration failure)

Red On Dialing/Line in use (Talking)

Yellow Blinking Call holding

BLF

Green On Subscription number is idle.

Red On Subscription number is busy.

Red On Subscription number is dialing.

Off Subscription number is unavailable.

Presence

Green On Subscription number is idle.

Red On Subscription number is busy.

Red On Subscription number is dialing.

Off Subscription number is unavailable.

DND Red On Enable DND

Off Disable DND

MWI Green Blinking New voice message waiting

Off No new voice message

22

7 Introduction to the User

7.1 Key description

Picture 4 - X3V Instruction of Keypad

Table 5 - X3V Instruction of Keypad

Number The keypad

names Instruction

1 Soft-menu

Buttons

These four buttons provide different functions corresponding to the

soft-menu displayed on the screen.

2 Hold Key Press the "Hold" key during the call, the user can hold the call, and press it

again to cancel the holding and restore the normal call state.

3 Transfer Key Press the "Transfer" button, the user can transfer the current call to other

numbers.

4 Conference Press the "Conference" button, the user can initiate a three-party

conference.

23

5 Navigate/OK

Keys

The user can press the up/down navigation key to change the line or move

the cursor in the screen list. On some Settings and text editing pages, the

user can press the left/right navigation key to change options or move the

cursor in the screen list to the left/right.

OK key: Default is equivalent to soft button confirmation; user can

customize the function.

6 voice mail Press the "voice mail" button, and the user enters the interface of SMS and

voice mail list.

7 Headset Key Users can press this key to open the headset

8

Standard

Telephone

Keys

The 12 standard telephone keys provide the same function as standard

telephones, but further to the standard function, some keys also provide

special function by long-pressing the key,

Key # - Long-pressed to lock the phone.

9 Contact Key Press the "Contact" key, the user can enter the address book interface and

select the contact person to call.

10 Call Log Key Press the "Call Log" button and the user can see the incoming/outgoing

calls.

11 Status key The user can press this key to view the status information of the device

12 Redial Press the Redial key to redial the last number dialed

13 Hands-free

Key

The user can press this key to open the audio channel of the

speakerphone.

14 Volume Down

Key

In the standby state, ring and ring configuration interface, press this button

to reduce the ring volume; Press this button to lower the volume on the call

or volume adjustment screen.

15 Mute Key During a call, the user can press this key to mute the microphone.

16 Volume Up

Key

In the standby state, ring and ring configuration interface, press this button

to increase the ring volume; Press this button to increase the volume on the

call or volume adjustment screen.

17 Side Key Long press the side key to enter the settings interface and set the required

functions.

24

7.2 Using Handset / Hands-free Speaker / Headphone

Using Handset

To talk over handset, user should lift the handset off the device and dial the number, or dial the number first,

then lift the handset and the number will be dialed. User can switch audio channel to handset by lifting the

handset when audio channel is turned on in speaker or headphone.

Using Hands-free Speaker

To talk over hands-free speaker, user should press the hands-free button then dial the number, or dial the

number first then press the hands-free button. User can switch audio channel to the speaker from handset by

pressing the hands-free button when audio channel is opened in handset.

Using Headphone

To use headphone, by default, user should headset button which is defined by DSS key to turn on the

headphone. Same as handset and hands-free speaker, user can dial the number before or after the

headphone is turned on.

Using Line Keys (Defined by DSS Key)

User can use line key to make or answer a call on specific line. If handset has been lifted, the audio channel

will be opened in handset. Otherwise, the audio channel will be opened in hands-free speaker or headphone.

7.3 Idle Screen

Picture 5 - Screen layout/default home screen

The image above shows the default standby screen, which is the user interface most of the time.

The upper half of the home screen shows the status of the device, information and data that can be edited

(such as voice messages, missed calls, auto answer, do not disturb, lock status, network connection status,

etc.).

The lower half of the area are the function menu keys, which are also the first layer of function menu keys,

through which users can operate the phone.

25

Users can restore the phone to the default standby screen interface by picking up and dropping the handle.

The left and right part of the area shows default configuration of Side keys, which dynamically display the

configuration of SIP information, message, headset, etc., which can be customized by users.

The icon description is described in 6.1 appendix I.

In some screens, there are many items or long text to be displayed which could not fit into the screen. They

will be arranged in a list or multiple lines with a scroll bar. If the user sees a scroll bar, he can use up/down

navigator buttons to scroll the list. By long-pressed the navigator keys, user can scroll the list or items in a

faster speed.

Picture 6 - Scroll icon

7.4 Phone Status

The phone status includes the following information about the phone:

Network Status:

VLAN ID

IPv4 or IPv6 status

IP Address

Network Mode

The Phone Device Information:

Mac Address

Phone Mode

Hardware Version number

Software Version number

Phone Storage (RAM and ROM)

System Running Time

VQ States:

Start time

Local user

Local IP

26

Local Port

Local codec

Jitter

Packets lost

MOS-LQ

RoundTripDelay

SymmOneWayDelay

SIP Account Information:

SIP Account

SIP Account Status ( register / uncommitted / trying / time out)

TR069 Connect Status (Displays only in the phone interface state)

The user can view the phone status through the phone interface and the web interface.

Phone interface: When the phone is in standby mode, press Menu >> Status and select the

option to view the corresponding information, as shown in the figure:

Picture 7 - The Phone status

WEB interface: Refer to 7.5 Web management to log in the phone page, enter the System >>

Information page, and check the phone status, as shown in the figure:

27

Picture 8 - WEB phone status

7.5 Making Phone Calls

Default Line

The device provides twenty line services. If both lines are configured, user can make or receive phone calls

on either line. If default line is configured by user, there will be a default line to be used for making outgoing

call which is indicated on the top left corner. To change the default line, user can press left/right navigator

buttons to switch between two lines. Enable or disable default line, user can press [Menu] >> [Features] >>

[General] >> [Default Line] or configure from Web Interface (Web / PHONE / Features / Basic Settings).

28

Picture 9 - Default line

Dialing Methods

User can dial a number by,

Entering the number directly

Selecting a phone number from phonebook contacts (Refer to 10.2.1 Local contacts)

Selecting a phone number from cloud phonebook contacts (Refer to 10.2.3 Cloud Phone Book)

Selecting a phone number from call logs (Refer to10.3 Call Log)

Redialing the last dialed number

Dialing Number then Opening Audio

To make a phone call, user can firstly dial a number by one of the above methods. When the dialed number is

completed, user can press [Dial] button on the soft-menu, or press hand-free button to turn on the speaker or

headphone, or lift the handset to call out with the current line, or user can press line key(Configured by DSS

Keys) to call out with specified line.

Picture 10 - Enable voice channel dialing

Opening Audio then Dialing the Number

29

Another alternative is the traditional way to firstly open the audio channel by lifting the handset, then turn on

the hands-free speaker or headphone by pressing hands-free button, or line key, and then dial the number

with one of the above methods. When completing the number dial, user can press [Dial] button or [OK] button

to call out, or the number can also be dialed out automatically after timeout.

Picture 11- Open the voice channel and dial the number

Cancel Call

While calling the number, user can stop the audio channel by putting back the handset or pressing the

hands-free button to drop the call.

Picture 12 - Call number

7.6 Web Management

Phone can be configured and managed on the web page of the phone. The user needs to enter the IP

address of the phone in the browser and open the web page of the phone firstly. The user can check the IP

address of the phone by pressing [Menu] >> [Status].

30

Picture 13 - Landing page

Users must correctly enter the user name and password to log in to the web page. The default user name and

password are "admin". For the specific details of the operation page, please refer to page 11 Web

configuration.

The device relies on IP network connection to provide service. Unlike traditional phone system based on a

circuit switched wire technology, IP devices are connected to each other over the network and exchange data

in packet basis based on the devices IP address.

To enable this phone, you must first correctly configure the network configuration. To configure the network,

users need to find the phone function menu button [Menu] >> [Advanced Settings] >> [Network] >>

[Network].

The default password for advanced Settings is "123".

NOTICE! If user saw a WAN Disconnected icon flashing in the middle of screen, it means the

network cable was not correctly connected to the devices network port. Please check the cable is

connected correctly to the device and to the network switch, router, or modem.

The device supports three types of networksIPv4/IPv6/IPv4&IPv6

There are three common IP configuration modes about IPv4

Dynamic Host Configuration Protocol (DHCP) This is the automatic configuration mode by getting

network configurations from a DHCP server. Users dont need to configure any parameters manually. All

configuration parameters will be getting from DHCP server and applied to the device. This is

recommended for the most users.

Static IP Configuration This option allows user to configure each IP parameters manually, including IP

Address, Subnet Mask, Default Gateway, and DNS servers. This is usually used in a technical

environment of network users.

PPPoE - This option is often used by users who connect the device to a broadband modem or router. To

establish a PPPoE connection, user should configure username and password provided by the service

provider.

The device is default configured in DHCP mode.

There are three common IP configuration modes about IPv6

DHCP - This is the automatic configuration mode by getting network configurations from a DHCP server.

31

Users need not to configure any parameters manually. All configuration parameters will be getting from

DHCP server and applied to the device. This is recommended for most users.

Static IP configuration - this option allows users to manually configure each IP parameter, including IP

address, mask, gateway, and primary and secondary domains. This usually applies to some

professional network user environments.

Please see 10.7.2.1 network Settings for detailed configuration and use.

7.7 SIP Configurations

A line must be configured properly to be able to provide telephony service. The line configuration is like a

virtualized SIM card on a mobile phone which stores the service provider and the account information used

for registration and authentication. When the device is applied with the configuration, it will register the device

to the service provider with the servers address and users authentication as stored in the configurations.

The user can conduct line configuration on the interface of the phone or the webpage, and input the

corresponding information at the registered address, registered user name, registered password and SIP

user and registered port respectively, which are provided by the SIP server administrator.

Phone interface: To manually configure a line, the user can press the line key for a long time, or press the

button in the function menu [Menu] >> [Advanced Settings] >> [Accounts] >> [Line n] configuration,

click ok to save the configuration.

NOTICE! User must enter correct PIN code to be able to advanced settings to edit line configuration.

(The default PIN is 123)

The parameters and screens are listed in below pictures.

Picture 14 - Phone line SIP address and account information

WEB interface: After logging into the phone page, enter [Line] >> [SIP] and select SIP for configuration,

click apply to complete registration after configuration, as shown below:

32

Picture 15 - Web SIP registration

33

8 Basic Function

8.1 Answering Calls

When there is an incoming call while the device is idle, user will see the following incoming call on the screen.

Picture 16 - Answering calls

User can answer the call by lifting the handset, open headphone or speaker phone by pressing the

hands-free button, or the [Answer] button. To divert the incoming call, user should press [Divert] button. To

reject the incoming call, user should press [Reject] button.

8.1.1 Talking

When the call is connected, user will see a talking mode screen as the following figure.

Picture 17 - Talking interface

Table 5- Talking mode

34

Number Name Description

Default line The line currently used by the phone.

Voice channel The icon shows the voice channel mode being used.

Calls to end The name or number of the person on the other end of the call.

Call duration The duration of a call after it has been established.

Numbers of lineShows how many calls are present on the current device

Speech qualityDisplays the current voice quality of the call.

8.1.2 Make / Receive Second Call

The device can support up to two concurrent calls. When there is already a call established, user can still

answer another incoming call on either lines or make a second call on either lines.

Second Incoming Call

When there is another incoming call during talking a phone call, this call will be waiting for user to answer.

User will see the call message in the middle of current screen. The device will not be ringing but playing call

waiting tone in the audio channel of the current call and the LED will be flashing in green. User can accept or

reject the call as same as normal incoming call. When the waiting call is answered, the first call will be held on

automatically.

Picture 18 - The second call interface

Second Outgoing Call

To make a second call, user may press [Xfer] / [Conf] button to make a new call on the default line or press

the line key to make new call on specific line. Then dial the number the same way as making a phone call.

Another alternative for making second call is to press DSS Keys or dial out from the configured Keys

(BLF/Speed Dial). When the user is making a second call with the above methods, the first call could be held

on manually or will be held on automatically at second dial.

Switching between Two Calls

35

When there are two calls established, user will see a dual calls screen as the following picture.

Picture 19 - Two way calling

User can press up/down navigator buttons to switch screen page, and switch call focus by pressing [Resume]

button.

Ending One Call

User may hang up the current talking call by closing the audio channel or press [End] button. The device will

return to single call mode in holding state.

8.2 End of the Call

After the user finishes the call, the user can put the handle back on the phone, press the hands-free button or

Softkey [End] key to close the voice channel and end the call.

Note! When the phone is in the reserved state, the user must press the [Resume] key to return to the

call state, or put the receiver back and press the hands-free button to end the call.

8.3 Redial

Redial the last outgoing number:

When the phone is in standby mode, press the redial button and the phone will call out the last outgoing

number.

Call out any number with the redial key:

Enter the number, press the redial key, and the phone will call out the number on the dial.

Press the redial key to enter the call record:

Log in the phone page, enter [Phone Settings] >> [Features] >> [Redial Settings], check Redial to

enter the call record page, press the redial button when standby to enter the call record page, and press

again to call out the current located number.

36

Picture 20 - Redial set

8.4 Dial-up Query

The phone is defaulted to turn on the dial-up inquiry function, dial-out, enter two or more numbers. The dial

interface will automatically match the call records, contacts in the number list. Use the navigation key and up

and down keys to select the number, press the call out key or wait for time out.

8.5 Auto-Answering

User may turn on the auto-answering mode on the device and any incoming call will be automatically

answered (not including call waiting). The auto-answering can be enabled on line basis.

The user can start the automatic answer function in the telephone interface or the webpage interface.

Phone interface:

Press [Menu] >> [Features] >> [Auto Answer] button;

Press the button to select the line, use the left/right navigation key to turn on/off the auto answer option, and

set the auto answer time to 5 seconds by default.

After completion, press [OK] key to save;

The icon in the upper right corner of the screen indicates that auto answer is enabled.

Picture 21 - Line 1 enables auto-answering

37

Picture 22 - The line has enabled auto-answering

WEB interface:

Log in the phone page, enter [Line] >> [SIP], select [SIP] >> [Basic settings], start auto-answering, and

click apply after setting the automatic answering time.

Picture 23 - Web page to start auto-answering

8.6 Callback

The user can dial back the number of the last call. If there is no call history, press the [Callback] button and

the phone will say "can't process".

Set the callback key through the phone interface:

Under standby, press [Menu] >> [Basic Settings] >> [Keyboard Settings] >> [Function key] or

[ Keyboard Settings ] >> [ Soft function key] choose to set up the function keys, key type, type

selection function name select callback function, input the callback key name, press [ OK ] key to save.

38

Picture 24 - Set the callback key on the phone

Set the callback key through the web interface:

Log in the phone page, enter the [Function Key] >> [Side Key] or [Function Key] >> [Function Key]

page, select the function Key, set the type as the function Key, and set the subtype as the callback, as

shown in the figure:

Picture 25 - Set the callback key on the web page

8.7 Mute

You can turn on mute mode during a call and turn off the microphone so that the local voice is not heard.

Normally, mute mode is automatically turned off at the end of a call. You can also turn on mute on any screen

(such as the free screen) and mute the ringtone automatically when there is an incoming call.

Mute mode can be turned on in all call modes (handles, headphones or hands-free).

8.7.1 Mute the Call

During the conversation, press the mute button on the phone: the mute button on the phone will turn

on the red light.

Red mute icon is displayed in the call interface, as shown in the figure:

39

Picture 26 - Mute the call

Cancel mute: press cancel mute on the phone again. The mute icon is no longer displayed in the call

screen. The red light is off by mute button.

8.7.2 Ringing Mute

Mute: press the mute button when the phone is in standby mode:

The top right corner of the phone shows the bell mute icon Mute button red light is always on, when

there is an incoming call, the phone will display the incoming call interface but will not ring.

Picture 27 - Ringing mute

Cancel ring tone mute: On the standby or incoming call screen, press the mute button again or

volume up cancel ring tone mute, no longer shows mute icon in upper right corner after

cancel .The phone mute icon is off .

40

8.8 Call Hold/Resume

The user can press the [Hold] button to maintain the current call, and this button will become the [ Resume ]

button, and the user can press the "resume" button to restore the call.

Picture 28 - Call hold interface

8.9 DND

User may enable Do-Not-Disturb (DND) feature on the device to reject incoming calls (including call waiting).

The DND can be enabled on line basis.

Enable/Disable phone all lines DND, the methods as the following

Phone interface: Default standby mode

1) Press [DND] button to enter the DND setting interface, select line or phone to enable DND.

2) Press [DND] button to enter the DND setting interface and disable DND.

Picture 29 - Enable DND

If the user wants to enable/disable the uninterrupted function on a specific line, the user can set the

41

uninterrupted function on the page of configuring the line.

1) Press [Menu] >> [Features] >> [DND] button, Enter the [DND] to edit the interface.

2) Click the left/right navigation button to select the line to adjust the mode and state of "do not disturb",

and then press the [OK] button to save.

The user will see the DND icon turn red, and the sip-line has enabled the mode of "DND".

Picture 30 - DND setting interface

The user can also use the DND timer. After the setting, the DND function will automatically turn on and the

DND icon will turn red when ringing.

Picture 31 - DND timer

WEB interface: Enter [Phone setting] >> [Features] >> [DND settings]set the DND type (off, phone,

line), and DND timing function.

42

Picture 32 - DND Settings

The user turns on the DND for a specific route on the web pageEnter [Line] >> [SIP], select a [Line] >>

[Basic settings], and enable DND.

Picture 33 - Line DND

8.10 Call Forward

Call forward is also known as Call Divert which is to divert the incoming call to a specific number based on

the conditions and configurations. User can configure the call forward settings of each line.

There are three types,

Unconditional Call Forward Forward any incoming call to the configured number.

Call Forward on Busy When user is busy, the incoming call will be forwarded to the configured

number.

Call Forward on No Answer When user does not answer the incoming call after the configured delay

time, the incoming call will be forwarded to the configured number.

43

Phone interface: Default standby mode

1) Press [Menu] >> [Features] >> [Call Forward] button, select the line by up/down navigation key,

press [OK] button to set call forward.

Picture 34 - Select the line to set up call forwarding

2) Select the call forward type by pressing the up/down navigation button. Click [OK] to configure call

forwarding and delay time.

Picture 35 - Select call forward type

3) Select enable/disable by pressing the left/right navigation button.

44

Picture 36 - Enable call forwarding and configure the call forwarding number

4) Browse the parameters set by the up/down navigation key and enter the required information. When

finished, press the [OK] button to save the changes.

WEB interface: Enter [Line] >> [SIP], Select a [Line] >> [Basic settings], and set the type, number and

time of forward forwarding.

Picture 37 - Set call forward

8.11 Call Transfer

When the user is talking with a remote party and wish to transfer the call to another remote party, there are

45

three way to transfer the call, blind transfer, attended transfer and Semi-Attended transfer.

Blind transfer: No need to negotiate with the other side, directly transfer the call to the other side.

Semi-Attended transfer: When you hear the ring back, transfer the call to the other party.

Attended transfer: When the caller answers the call, transfer the call to the other party.

NoteFor more transfer Settings, please refer to 12.6 Line >> Dial Plan

8.11.1 Blind transfer

During the call, the user presses the function menu button [Transfer] or the transfer button on the

phone , Enter the number to transfer or press the contact button or the history button to select the

number, press the transfer key again or blind transfer to a third party. After the third party rings, the

phone will show that the transfer is successful and hang up.

Picture 38 - Transfer interface

8.11.2 Semi-Attended transfer

During the call, the user presses the function menu button [transfer] or the transfer button on the phone

to input the number to be transferred or press the contact button or the historical record button to select the

number, and then press the call button. When the third party is not answered, press the transfer on the call

interface to make the semi-attendance transfer or press the end button to cancel the semi-attendance

transfer.

46

Picture 39 - Semi-Attended transfer

8.11.3 Attended transfer

Attendance transfer is also known as "courtesy mode", which is to transfer the call by calling the other party

and waiting for the other party to answer the call.

The same procedure to calling. In dual call mode, press the "transfer" button to transfer the first call to the

second call.

Picture 40 - Attended transfernen

8.12 Call Waiting

Enable call waiting: new calls can be accepted during a call.

Disable call waiting: new calls will be automatically rejected and a busy tone will be prompted.

Enable call waiting tone: when you receive a new call on the line, the tone will beep.

The user can enable/disable the call waiting function in the phone interface and the web interface.

Phone interface: Press [Menu] >> [Features] >> [Call waiting], the navigation key and left/right button

47

enable/disable call waiting and call waiting tone. Press [Menu] >> [Features] >> [Call waiting], the

navigation key and left/right button enable/disable call waiting and call waiting tone.

Picture 41 - Call waiting setting

WEB interface: Enter [Phone Settings] >> [Features] >> [Basic Settings], enable/disable call

waiting and call waiting tone.

Picture 42 - Web call waiting setting

Picture 43 - Web call waiting tone setting

48

8.13 Conference

8.13.1 Local Conference

To conduct local conference, the user needs to log in the webpage and enter [Line] >> [SIP] >> [Basic

settings]. The meeting mode is set as local (the default is local mode), as shown in the figure:

Picture 44 - Local conference setting

Two ways to create a local conference:

1) The device has two channels of communication. Press the conference button on the call interface. When

selecting the conference number, select the other number that already exists.

Picture 45 - Local conference (1)

2) If the device has a call all the way, press the conference key in the call interface, enter the number to join

the meeting and press the call; After the opposite end is answered, press the conference button again to

set up the local tripartite conference:

49

Picture 46 - Local conference (2)

Note: During the conference, press the split button to split the conference and press the end button to end the

call.

8.13.2 Network Conference

Users need server support for network conference.

Log in the web page, enter [Line] >> [SIP] >> [Basic settings], set the conference mode as server mode

(default is local mode), set the server conference room number (please consult your system administrator),

as shown in the figure:

Picture 47 - Network conference

Method to join a network conference:

Multi-party call number of network conference room and enter the password then all enter the

conference room.

The two phones have established common calls. Press the conference button to invite new members to

the conference. Follow the voice prompt to operate.

Note: the upper limit of the number of participants in the network conference varies according to the server.

8.14 Call Park

Call park requires server support. Consult your system administrator for support.

When you are on the call, if it is not convenient to answer the phone at this time, you can press the configured

park button to hold the call; After a successful park, you can resume the call by pressing the configured park

button on other devices.

Set the call park button:

Phone interface: long press a function key to enter the function key Settings interface, or through the

[Menu] >> [Basic Settings] >> [Keyboard Settings] enter the settings interface of function keys, and

set the key function type as memory and subtypes as call park, reside values for the server calls park

50

number, set up corresponding SIP lines.

WEB interface: log in the phone page, enter the [Function Key] >> [Function Key] page, select a

DSSkey, set the function key type as memory key, the subtype as call park, and the value as the call park

number of the server, and set the corresponding SIP line.

Picture 48 - Phone set call park

Picture 49 - WEB set call park

8.15 Pick Up

Pick up requires server support. Consult your system administrator for support.

You can use the Pick Up function to answer incoming calls from other users. The phone can pick up incoming

calls by configuring DSSkey for BLF and setting the Pick Up code.

Phone interface: press [Menu] >> [Basic Settings] >> [Keyboard Settings] >> [DSS Key Settings], select

the function key to set.

Set the line, function key type as memory key, subtype as BLF/NEW CALL, set subscription number, and

pick up code.

Other phones call the subscription number, and the opposite end is in the incoming ring.

Press the DSS key to pick up the phone.

The caller picks up the call and speaks to it.

WEB interface: Log in the phone webpage, enter the [Function Key] >> [Function Key] page, select a

DSSkey, set the memory key type as memory key, the subtype as BLF/NEW CALL, and set the

51

corresponding SIP line and pick up codes.

Picture 50 - Phone pick up setting

Picture 51 - WEB pick up setting

8.16 Anonymous Call

8.16.1 Anonymous Call

The phone can set up anonymous calls to hide the calling number and the calling name.

You can see anonymity in the context of [Menu] >> [Advanced Settings] >> [Accounts] >>

[Advanced].

The default is none, which is off, and RFC3323 and RFC3325 are optional.

Select any one to open the anonymous call.

52

Picture 52 - Enable anonymous call

On the web page [Line] >> [SIP] >> [Advanced Settings] can also open the mode of anonymous calls.

Setting to enable anonymous calls also corresponds to the SIP line. That is, the setting under the SIP1

page can only take effect on the SIP1 line.

Picture 53 - Enable Anonymous web page call

The following is a transcript of an anonymous call received by the phone.

Picture 54 - Anonymous call log

53

8.16.2 Ban Anonymous Call

The device can be set to prohibit anonymous calls, that is anonymous calls to the number will be directly

rejected.

In the phone [Menu] >> [Features] >> [Ban anonymous call], click to enter and all SIP lines will be

displayed.

Click Softkey [Switch] or [<] [>] to switch the SIP line and enable anonymous call.

Picture 55 - Anonymous calls are not allowed on the phone

On the web page [Line] >> [SIP] >> [Advanced Settings], also can disable anonymous calls.

The setup to disable anonymous calls also corresponds to the SIP line. That is, the setting under the

SIP1 page can only take effect on the SIP1 line.

Picture 56 - Page Settings blocking anonymous call

8.17 Hotline

The device supports hotline dialing. After setting up the hotline dialing, directly pick up the handset,

hands-free, earphone, etc., and the phone will automatically call according to the hotline delay time.

In the phone [Menu] >> [Features] >> [Advanced] >> [Hotline], click to enter and all SIP lines will be

displayed.

Then set the hotline for each SIP line, which is off by default.

Open the hotline, set the hotline number, set the delay time of the hotline.

54

Picture 57 - Phone hotline setting interface

On the website [Line] >> [SIP] >> [Basic Settings], can also set up a hotline.

The setup hotline also corresponds to the SIP line. That is, the hotline set in the SIP1 webpage can only

be activated in the SIP1 line.

Picture 58 - Hotline set up on webpage

8.18 Emergency Call

The emergency call function is used to et the corresponding emergency call number on the phone after

enabling the keypad lock. You can also call emergency services when your phone is locked.

1) Configure the emergency call number: log in the phone page, enter the [Phone Settings] >> [Function

Settings]>> [Basic Settings]page, set up the emergency call code, if you need to set up more than one

emergency call code, please use ", "to separate.

55

Picture 59 - Set up an emergency call number

2) When the phone set the keyboard lock, you can call the emergency call number without unlocking, as

shown in the figure:

Picture 60 - Dial the emergency number

56

9 Advance Function

9.1 BLF (Busy Lamp Field)

9.1.1 Configure the BLF Functionality

Page interface: log in the phone page, enter the [Function key] >> [Function key] page, select a DSS

key, set the function key type as memory key, choose subtype among BLF/NEW CALL, BLF/BXFER,

BLF/AXFER, BLF/CONF, set BLF/DTMF value as the number to be subscribed, set the corresponding

SIP line. The pickup number is provided by the server. The specific usage refers to 8.16 Pick up.

Picture 61 - Web page configuration BLF function key

Phone interface: long press a function key to enter the function key Settings interface, or go to the

[Menu] >> [Basic Settings] >> [Keyboard Settings] to enter [Soft function key] to set the settings

interface, set the key function types as memory keys and a subtype of BLF/NEW CALL, BLF/BXFER,

BLF/AXFER, BLF/CONF, BLF/DTMF. The values is the subscription number, and set up corresponding

SIP lines.

57

Picture 62 - Phone configuration BLF function key

Table 6 - BLF Function key subtype parameter list

Subtype Standby is described Calling is described

BLF/NEW

CALL

Pressing the BLF key while standby to

dial the subscriber number.

When you press this BLF key while talking to

another user, you create a new call along with the

subscribed number.

BLF/BXFE

R

Pressing the BLF key while standby to

dial the subscriber number.

When you press this BLF key while talking to

another user, you blind transfer the call to the

subscribed number.

BLF/AXFE

R

Pressing the BLF key while standby to

dial the subscriber number.

When you press this BLF key while talking to

another user, you attendance transfer the call to

the subscribed number.

BLF/Confer

ence

Pressing the BLF key while standby to

dial the subscriber number.

When you press this BLF key while talking to

another user, you invite the subscriber number to

join the meeting.

BLF/DTMF Pressing the BLF key while standby to

dial the subscriber number.

When the BLF key is pressed while talking to

another user, the phone automatically sends the

DTMF corresponding to the BLF key number.

9.1.2 Use the BLF Function

The BLF, also known as a "busy light field," notifies the user of the status of the subscribed object and is used

by the server to pick up the call. BLF helps you monitor the other person's status (idle, ringing, talking, off).

BLF function:

Monitor the status of subscribed phones.

Call the subscribed number.

Transfer calls/calls to the subscribed number.

Pickup incoming calls from subscribed number.

1) Monitors the status of subscribed phones.

Configuration BLF function keys, when the subscription of the number of the state (idle, ringing, talking) is

changed, the LED lights of function key will have corresponding change, see appendix 6.3 LED to get to

know each other under different status leds.

2) Call the subscribed number.

When the phone is in standby mode, press the configured BLF key to call out the subscribed number.

3) Transfer calls to the subscribed number.

Refer to Table 9.1.1-blf function key subtype parameter list, the BLF key can be used for blind rotation,

attention-rotation and semi-attention-rotation of the current call, and also can invite the subscribed number to

join the call and send DTMF, etc.

58

4) Pickup incoming calls from subscribed phones.

When configuring BLF function key, configure the pickup number.

When the subscription number telephone rings, refer to appendix 6.3, BLF LED will turn red at this time. At

this point, press the BLF button to answer the incoming call from the subscribed number.

9.2 BLF List

BLF List Key is to put the number to be subscribed into a group on the server side, and the phone uses the

URL of this group to make unified subscription. The specific information, number, name and status of each

number can be resolved based on notify sent from the server. The unoccupied Memory Key is then set as the

BLF List Key. If the state of the subscription object changes later, the corresponding led light state will be

changed.

Configure BLF List function: log in the phone page, enter the [Line] >> [SIP] >> [Advanced settings] page,

open the BLF List, and configure the BLF List number.

Picture 63 - Configure the BLF List functionality

Use the BLF List function: when the configuration is completed, the phone will automatically subscribe to the

contents of the BLF List group. Users can monitor, call and transfer the corresponding number by pressing

the BLF List key.

Picture 64 - BLF List number display

59

9.3 Record

The device supports recording during a call.

9.3.1 Server Record

When using the network server to record, it is necessary to open the recording in the phone web page

[Application] >> [Manage recording]. The type is selected as network, and the address and port of the

recording server are filled in and the voice coding is selected. The web is as follows:

Picture 65 - Web server recording

Note: to be used with recording software.

9.3.2 SIP INFO Record

The phone is registered with a server that supports SIP INFO recording. After registering the account, check

the recording module of [Application] >> [Manage recording] to open the recording, and the recording type

is SIP INFO.

Picture 66 - Web SIP info recording

9.4 Agent

Agent (Agent function) of the phone can be realized: when multiple people use a device for Agent services at

60

different times, he or she can quickly register his or her SIP account on the same server. The Agent functions

of the phone can be divided into Normal and Hotel Guest. The Hotel Guest mode requires server support.

Normal Mode:

Configure agent function: set a DSSkey as agent, press the function key or enter the [Menu] >>

[Features] >> [Agent] to enter the agent page. The SIP server needs to be configured before the account

can be configured.

Picture 67 - Configure the agent account in normal mode

Picture 68 -Configure the proxy account-hotel Guest mode

Table 7 - Agency mode

Parameter Description

Normal mode

Number Set the proxy account number.

User Set the proxy account number to verify the user name.

Password Set the proxy account number to verify the password.

Line Select the SIP line.

61

CallLogUsers can choose to save all types, or delete.

Hotel Guest mode

Number Set the proxy account number.

Password Set the proxy account number to verify the password.

Line Select the SIP line.

CallLog Users can choose to save all types, or delete.

Using agent functions:

1) When he phone has been configured on SIP server, fill in the correct number and user name password,

click login and then the phone can be registered to the SIP server;

2) After registration, click logout and the phone can delete the user name and password, and log out of the

SIP account.

3) Click Unregister and the phone retains the user name and password, and logs out of the SIP account.

Picture 69 - Agent logon page

9.5 Intercom

When the Intercom is enabled, it can automatically receive calls from the intercom.

Picture 70 - Web Intercom configure

62

Table 8 - Intercom configure

Parameter Description

Enable Intercom When intercom is enabled, the device will accept the incoming call request with a SIP

header of Alert-Info instruction to automatically answer the call after specific delay.

Enable Intercom

Mute Enable mute mode during the intercom call

Enable Intercom

Tone If the incoming call is intercom call, the phone plays the intercom tone

Enable Intercom

Barge

Enable Intercom Barge by selecting it, the phone auto answers the intercom call

during a call. If the current call is intercom call, the phone will reject the second

intercom call

9.6 MCAST

This feature allows user to make some kind of broadcast call to people who are in multicast group. User can

configure a multicast DSS Key on the phone, which allows user to send a Real Time Transport Protocol (RTP)

stream to the pre-configured multicast address without involving SIP signaling. You can also configure the

phone to receive an RTP stream from pre-configured multicast listening address without involving SIP

signaling. You can specify up to 10 multicast listening addresses.

63

Picture 71 - Multicast Settings Page

Table 9 - MCAST Parameters on Web

Parameters Description

Normal Call Priority Define the priority of the active call, 1 is the highest priority, 10 is the lowest.

Enable Page Priority The voice call in progress shall take precedence over all incoming paging calls.

Name Listened multicast server name

Host:port Listened multicast servers multicast IP address and port.

Multicast:

Go to web page of [Function Key] >> [Function Key] , select the type to multicast, set the multicast

address, and select the codec.

Click Apply.

Set up the name, host and port of the receiving multicast on the web page of [Phone Settings] >>

[MCAST].

Press the DSSKY of Multicast Key which you set.

Receive end will receive multicast call and play multicast automatically.

9.7 SCAShared Call Appearance

Users need the support of server end to use SCA function. You can refer to

1) Configure on Phone

When registering with the BroadSoft server, a Phone can register the account created previously on

multiple terminals.

Picture 72 - Register BroadSoft account

After the phone set registers with the BroadSoft server, a server type needs to be set. Specifically, log in

to the webpage of the phone set, choose [Line] >> [SIP] >> [Advanced Settings] and set Specific

64

Server Type to BroadSoft, as shown in the following figure.

Picture 73 - Set BroadSoft server

If a phone needs to enable the SCA function. Specifically, log in to the webpage of the phone set,

choose [Line] >> [SIP] >> [Advanced Settings], and select Enable SCA. If SCA is not enabled, the

registered line is the private line.

Picture 74 - Enable SCA

After an account is configured and successfully registered, you can configure lines whose DSS Key is Shared

Call Appearance on the Function Key page to facilitate viewing the call status of the group. Each line key

represents a call appearance. Understand the call status by referring to 6.3 Appendix III LED .

To facilitate private hold, configure keys whose DSS Key is Private Hold on the Function Key page. Pay

65

attention that the public hold key is the softkey-hold key during a call.

Picture 75 - Set Private Hold Function Key

Each phone registered with the BroadSoft server should be configured as above, then the SCA function

can be used.

2) LED Status

To facilitate viewing the call status of a group, configure the DSS Key as SCA. The following table describes

the LEDs of lines in different states.

Table 10 - LED Status of SCA

State&Direction Local Remote

Idle Off Off

Seized Steady green Steady red

Progressing (outgoing call) Steady green Steady red

Alerting (incoming call) Fast blinking green Fast blinking green

Active Steady green Steady red

Public Held (hold) Slow blinking green Slow blinking red

Held-private (private hold) Slow blinking yellow Steady red

Bridge-active (Barge-in) Steady green Steady red

Bridge-held Steady green Steady red

3) 3 Shared Call Appearance(SCA)

The following lists a couple of instances to facilitate understanding.

In the following scenarios, the manager and secretary register the same SCA account and the account is

configured based on the preceding steps.

Scenario 1: When this account receives an incoming call, the phone sets of both the manager and the

secretary will receive the call and ring. If the manager is busy, the manager can reject the call and the

manager's phone set stops ringing but the secretary's phone set keeps ringing until the secretary

rejects/answers the call or the call times out.

Scenario 2: When this account receives an incoming call, if the secretary answers the call first and the

manager is required to answer the call, the secretary can press the Public Hold key to hold this call and notify

the manager. The manager can press the line key corresponding to the SCA to answer the call.

Scenario 3: The manager is in an important call with a customer and needs to leave for a while. If the

66

manager does not want others to retrieve this call, the manager can press the Private Hold key.

Scenario 4: The manager is in a call with a customer and requires the secretary to join the call to make

records. The secretary can press the corresponding SCA line key to barge in this call.

9.8 Message

9.8.1 SMS

If the service of the line supports the function of the short message, when the other end sends a text

message to the number, the user will receive the notification of the short message and display the icon of the

new SMS on the standby screen interface.

Picture 76 - SMS

Send messages:

Go to [Menu] >> [Message] >> [SMS].

Users can create new messages, select lines and send numbers.

After editing is completed, click Send.

View SMS:

Use the navigation keys to select the standby icon [message]

After selecting, press the navigation key [OK] to enter the SMS inbox interface.

Select the unread message and press [OK] to read the unread message.

Reply to SMS:

Use the navigation keys to select the standby icon [Message].

After selecting, press the navigation key [OK] to enter the SMS inbox interface.

Select the message you want to reply to, select Softkey's [Reply], edit it, and click Send.

9.8.2 MWIMessage Waiting Indicator

If the service of the lines supports voice message feature, when the user is not available to answer the call,

67

the caller can leave a voice message on the server to the user. User will receive voice message notification

from the server and device will prompt a voice message waiting icon on the standby screen.

Picture 77 - New Voice Message Notification

Voice message icon

To listen to a voice message, the user must first configure the voicemail number. After the voicemail number

is configured, the user can retrieve the voicemail of the default line.

When the phone is in the default standby state,

The Side Key is pre-installed with a voice message shortcut key - [MWI] key.

Press [MWI] to open the voice message configuration interface, and select the line to be configured by

pressing the up/down navigation buttons.

Press the [Edit] button to edit the voice message number. When finished, press the [OK] button to save

the configuration.

In the following picture, 19 in front of line brackets represents unread voice messages, and 33

represents the total number of voice messages.

68

Picture 78 - Voice message interface

Picture 79 - Configure voicemail number

9.9 SIP Hotspot

SIP hotspot is a simple but practical function. With simple configurations, the SIP hotspot function can

implement group ringing. SIP accounts can be expanded.

The users can set functions as a SIP hotspot and other phones set (B and C) function as SIP hotspot clients.

When somebody calls phone set A, phone sets A, B, and C all ring at the same time. When any phone set

answers the call, other phone sets stop ringing. The call can be answered by only one phone set. When B or

C initiates a call, the SIP number registered by phone set A is the calling number.

To set a SIP hotspot, register at least one SIP account.

69

Picture 80 -SIP hotspot

Table 11 - SIP hotspot Parameters

Parameters Description

Device Table

If your phone is set to SIP hotspot server, Device Table will display as Client

Device Table which connected to your phone.

If your phone is set to SIP hotspot client, Device Table will display as Server

Device Table which you can connect to.

SIP hotspot

Enable hotspot Set it to be Enable to enable the feature.

Mode Choose hotspot, phone will be a SIP hotspot server; Choose Client, phone will be

a SIP hotspot Client

Monitor Type

Either the Multicast or Broadcast is ok. If you want to limit the broadcast packets,

youd better use broadcast. But, if client choose broadcast, the SIP hotspot phone

must be broadcast.

Monitor Address The address of broadcast, hotspot server and hotspot client must be same.

Remote Port Type the Remote port number.

Picture 81 - SIP hotspot server configuration

Configure SIP hotspot client:

70

To set as a SIP hotspot client, no SIP account needs to be set. The Phone set will automatically obtain and

configure a SIP account. On the SIP Hotspot tab page, set Mode to Client. The values of other options are the

same as those of the hotspot.

Picture 82 - SIP hotspot client configuration

As the hotspot server, the default extension number is 0. When the phone is used as the client, the extension

number is increased from 1, you can view the extension number through the [SIP Hotspot] page.

Call extension number:

The hotspot server and the client can dial each other through the extension number.

For example, extension 1 dials extension 0.

71

10 Phone Settings

10.1 Basic Settings

10.1.1 Language

The user can set the phone language through the phone interface and web interface.

Phone end: After resetting the factory settings, the user needs to set the language; when setting the

language during standby, go to [Menu] >> [Basic] >> [Language] Settings, as shown in the figure.

Picture 83 - Phone language setting

Web interface: Log in to the phone webpage and set the language in the drop-down box at the top right

corner of the page, as shown in the figure:

Picture 84 - Language setting on Web page

The function box on the right side of the web interface language setting box is Synchronize language to

phone; if selected, the phone language will be synchronized with the webpage language. If it is not

72

selected, it will not be synchronized.

10.1.2 Time & Date

Users can set the phone time through the phone interface and web interface.

Phone end: When the phone is in the default standby state, press the [Menu] >> [Basic] >> [Time &

Date] , use the up/down navigation button to edit parameters, press the [OK] to save after completion, as

shown in the figure:

Picture 85 - Set time & date on phone

Web end: Log in to the phone webpage and enter [Phone Settings] >> [Time/Date] , as shown in the

figure:

Picture 86 - Set time & date on webpage

Table 12 - Time Settings Parameters

Parameters Description

73

Mode

Auto/Manual

Auto: Enable network time synchronization via SNTP protocol, default enabled.

Manual: User can modify data manually.

SNTP Server SNTP server address

Time zone Select the time zone

Time format

Select time format from one of the followings:

1 JAN, MON

1 January, Monday

JAN 1, MON

January 1, Monday

MON, 1 JAN

Monday, 1 January

MON, JAN 1

Monday, January 1

DD-MM-YY

DD-MM-YYYY

MM-DD-YY

MM-DD-YYYY

YY-MM-DD

YYYY-MM-DD

Separator Choose the separator between year and moth and day

12-Hour Clock Display the clock in 12-hour format

Daylight Saving Time Enable or Disable the Daylight Saving Time

10.1.3 Screen

The user can set the phone screen parameters through both of the phone interface and web interface.

Phone: When the phone is in the default standby state, go to [Menu] >> [Basic] >> [Screen Settings] to

edit the screen parameters. After editing, click [OK] to save, as shown in the figure:

74

Picture 87 - Set screen parameters on phone

Web : Go to [Phone Settings] >> [Advanced] Advanced, edit the screen parameters, and click Apply to

save.

10.1.3.1 Brightness and backlight

Set the brightness level in use from 1 to 16, [<] or [>] switch brightness level.

Set the brightness level in the energy-saving mode from 0 to 16, [<] or [>] switch the brightness level.

Set the backlight time to 30 seconds by default. You can turn it off or select 15 seconds /30 seconds /45

seconds /60 seconds /90 seconds /120 seconds.

The screen saver can be turned on or off by default.

Web interface: enter [Phone Settings] >> [Advanced], edit screen parameters, and click submit to save.

Picture 88 - Page screen Settings

10.1.3.2 Screen Saver

Press [Screen Settings] to find the [Screen protection] button, press [left] / [right] button to open/close

the screen protection, set the timeout time, the default is 15S, after completion, press [OK] button to

save.

After saving, return to standby mode and enter the screen saver after 15s, as follows:

.

Picture 89 - Phone screen saver

10.1.4 Ring

When the device is in the default standby mode,

75

Press soft-button [Menu] till you find the [Basic] item.

Enter [Basic] item till you find [Ring] item.

Enter [Ring] item and you will find [Headset] or [Handsfree] item, press left / right navigator keys to

adjust the ring volume, save the adjustment by pressing [OK] when done.

Enter [Ring type] item, press left / right navigator keys to change the ring type, save the adjustment by

pressing [OK] when done.

10.1.5 Voice Volume

When the device is in the default standby mode,

Press soft-button [Menu] till you find the [Basic] item.

Enter [Basic] item till you find [Voice Volume] item.

Enter [Voice Volume] item and you will find [Headset], [Handsfree] and [Headset] item.

Enter [Headset] or [Handsfree] or [Headset] item, press Left / Right navigator keys to adjust the audio

volume for different mode.

Save the adjustment by pressing [OK] when done.

10.1.6 Greeting Words

When the device is in the default standby mode,

Press soft-button [Menu] till you find the [Basic] item.

Enter [Basic] item till you find [Greeting Words] item.

Press [OK] to enter the setting interface to edit the Greetings Words.

Save the adjustment by pressing [OK] when done.

NOTICE! The welcome message can only be displayed in the upper left corner of standby mode when

the default option is disabled.

10.1.7 Reboot

When the device is in the default standby mode,

Press soft-button [Menu] till you find the [Basic] item.

Enter [Basic] item till you find [Reboot] item.

Press [OK] a prompt message, "restart now," prompts the user.

Press [OK] to restart the phone or [Cancel].

The phone is in standby mode,

The configurable [OK] key is the restart key. Press [OK], a prompt message, "restart now" prompts the

user.

Press [OK] to restart the phone or [Cancel] to exit.

10.2 Phone Book

10.2.1 Local Contact

User can save contacts information in the phone book and dial the contacts phone number(s) from the

phone book. To open the phone book, user should press soft-menu button [Contact] in the default standby

screen or keypad.

76

By default the phone book is empty, user may add contact(s) into the phone book manually or from call logs.

Picture 90 - Phone book screen

Note!Phone user account can store contact information, different models and specifications.

Picture 91 - Local Phone book

When there are contact records in the phone book, the contact records will be arranged in the alphabet order.

User may browse the contacts with up/down navigator keys. The record indicator tells user which contact is

currently focused. User may check the contacts information by pressing [OK] button.

10.2.1.1 Add / Edit / Delete Contact

To add a new contact, user should press [Add] button to open Add Contact screen and enter the contact

information of the followings,

Contact Name

Tel. Number

Mobile Number

Other Number

77

Line

Ring Tone

Contact Group

Photo

Picture 92 - Add New Contact

User can edit a contact by pressing [Option] >> [Edit] button.

To delete a contact, user should move the record indicator to the position of the contact to be deleted, press

[Option] >> [Delete] button and confirm with [OK].

10.2.1.2 Add / Edit / Delete Group

By default, the group list is blank. User can create his/her own groups, edit the group name, add or remove

contacts in the group, and delete a group.

To add a group, press [Add Group] button.

To delete a group, press [Option] >> [Delete] button.

To edit a group, press [Edit] button.

The Number behind the group name means the total contacts number of selected groups.

78

Picture 93 - Group List

10.2.1.3 Browse and Add / Remove Contacts in Group

User can browse contacts in a group by opening the group in group list with [OK] button.

Picture 94 - Browsing Contacts in a Group

When user is browsing contacts of a group, user can also add contacts in that group by pressing [Add] button

to enter the group contacts management interface, then press [OK] button to save the contact. The contact

will also be added in local phonebook. User can delete contact from group by [Option] >> [Delete].

Picture 95 - Add Contacts in a Group

10.2.2 Blacklist

The device Support blacklist, such as the number added to the blacklist, the number of calls directly refused

to the end, the end of the phone shows no incoming calls. (Blacklisted Numbers can be called out normally)

There are multiple ways to add a number to Blacklist on X210 device. It can be added directly on

[Menu] >> [Contact] >> [Blacklist].

79

Select any number in the phone book (both local and network) for configuration addition.

Select any number in the call log for configuration addition.

Picture 96 - Add Blacklist

There are various ways to add number to the blacklist on web page, which can be added in the [Phone

book] >> [Call list] >> [Restricted Incoming Calls].

Select any number in the phone book (both local and network) for configuration addition.

Select any number in the call log for configuration addition.

Picture 97 - Web Blacklist

10.2.3 Cloud Phone Book

10.2.3.1 Configure Cloud Phone book

Cloud phonebook allows user to configure the device by downloading a phonebook from a cloud server. This

is convenient for office users to use the phonebook from a single source and save the effort to create and

maintain the contact list individually. It is also a useful tool to synchronize his/her phonebook from a personal

mobile phone to the device with Cloud Phonebook Service and App which is to be provided publicly soon.

NOTICE! The cloud phonebook is ONLY temporarily downloaded to the device each time when it is

opened on the device to ensure the user get the latest phonebook. However, the downloading may

take a couple seconds depending on the network condition. Therefore, it is highly recommended for

the users to save important contacts from cloud to local phonebook for saving download time.

Open cloud phonebook list, press [Menu] >> [PhoneBook] >> [Cloud Contacts] in phonebook screen.

TIPS! The first configuration on cloud phone should be completed on Web page by selecting

[PhoneBook] >> [Cloud Contacts]. The setting of addition/deletion on device could be done after the

80

first setting on Web page.

Picture 98 - Cloud phone book list

10.2.3.2 Downloading Cloud Phone book

In cloud phone book screen, user can open a cloud phone book by pressing [OK] / [Enter] button. The device

will start downloading the phone book. The user will be prompted with a warning message if the download

fails,

Once the cloud phone book is downloaded completely, the user can browse the contact list and dial the

contact number same as in local phonebook.

Picture 99 - Downloading Cloud Phone book

10.3 Call Log

The phone can store the call record (the quantity of storage varies according to different specifications). The

user can press [CallLog] to open the call record and check the records of all incoming calls, outgoing calls

and missed calls.

In the call logs interface, user may browse the call logs with up/down navigator keys.

81

Each call log record is presented with call type and call party number / name. User can check further call

log detail by pressing [OK] button and dial the number with [Dial] button, or add the call log number to

phonebook with pressing [Option] >> [Add to Contact] .

User can delete a call log by pressing [Delete] button and clear all call logs by pressing [Delete All] button.

Picture 100 - Call Log

Users can also filter the call records of specific call types to narrow down the scope of search records, and

select a call record type by left and right navigation keys.

- Missed Call Log

- Incoming Call Log

- Outgoing Call Log

- Forward Call Log

Picture 101 - Filter call Log types

82

10.4 Function Key

Users can use the page switch key to switch DSS display pages quickly. In addition, the user can also long

press each DSS key to modify the corresponding key Settings.

Picture 102 - DSS LCD key Page Configuration Screen

The DSS Key could be configured as followings,

Memory Key

Speed Dial/Intercom/BLF/Presence/Call Park/Call Forward (to someone)

Line

Key Event

MWI/DND/Hold/Transfer/Phonebook/Redial/Pickup/Call Forward (to specified line)/Headset/

SMS/Release

DTMF

Action URL

BLF List Key

Multicast

Action URL

XML Browser

Webpage interface: [Function key] >> [Function key].

83

Picture 103 - DSS settings

Moreover, user also can add the user-defined title for the DSS Keys, which is configured as Memory Key /

Line / URL / Multicast / Prefix.

More detailed information refers to 12.23 Function Key and 6.3 Appendix III LED Definition .

10.5 Wi-Fi

The device has a built-in wireless network card, which supports 2.4G wireless network connection.LCD and

web page can be scanned and connected to wireless network.

When the device is in the default standby mode

Press soft-button [Menu] till you find the [Basic] item.

Press [WLAN] to enter the setting interface.

Select the wireless network and use the left and right keys to activate it. Enable the device to search the

current wireless network automatically.

Select to the available network, enter the user name and password to connect successfully.

Picture 104 - WIFI settings

10.6 Headset

10.6.1 Wired Headset

The device supports wired earphone with RJ9 interface, which can play incoming call sound and talk with

earphone.

After the phone is connected to the headset, the default DSS key of headset will be green light which

indicating that the headset can be used normally.

On the webpage [Phone settings] >> [Features], you can set the headset answering function, and the

ring tone for headset.

84

Picture 105 - Headset function settings

10.6.2 EHS Headset

Phone into [Menu] >> [Features] >> [Advanced], Select [EHS Headset] , can open EHS Headset (default

closed EHS Headset).

Picture 106 - EHS Headset setting

10.7 Advanced

10.7.1 Line Configurations

85

Picture 107 - SIP address and account information

Save the adjustment by pressing [OK] when done.

Users who want to configure more options should use web management portal to modify or Advanced

Settings in accounts on the individual line to configure those options.

Picture 108 - Configure Advanced Line Options

10.7.2 Network Settings

10.7.2.1 Network Settings

IP Mode

There are 3 network protocol mode options, IPv4, IPv6 and IPv4 & IPv6.

User could select available mode via < or >. The selected IP mode will be activated after pressing [OK]

button.

Picture 109 - Network mode Settings

IPv4

In IPv4 mode, there are 3 connection mode options: DHCP, PPPoE and Static

86

IP.

Picture 110 - DHCP network mode

When using DHCP mode, phone will get the IP address from DHCP server (router).

Use DHCP DNS: It is enabled as default. Enable means phone will get DNS address from DHCP

server and disable means not.

Use DHCP time: It is disabled as default. Enable to manage the time of get DNS address from DHCP

server and disable means not

.

Picture 111 - PPPoE network mode

When using PPPoE, phone will get the IP address from PPPoE server.

Username: PPPoE user name.

Password: PPPoE password.

87

Picture 112 - Static IP network mode

When using Static IP mode, user must configure the IP address manually.

IP Address: Phone IP address.

Mask: sub mask of your LAN.

Gateway: The gateway IP address. Phone could access the other network via it.

Primary DNS: Primary DNS address. The default is 8.8.8.8, Google DNS server address.

Secondary DNS: When primary DNS is not available, Secondary DNS will work.

IPv6

In IPv6, there are 2 connection mode options, DHCP and Static IP.

DHCP configuration refers to IPv4 introduction in last page.

Static IP configuration is almost same as IPv4s, except the IPv6 Prefix.

IPv6 Prefix: IPv6 prefix, it is similar with mask of IPv4.

Picture 113 - IPv6 Static IP network mode

10.7.2.2 QoS & VLAN

LLDP

Link Layer Discovery Protocol. LLDP is a vendor independent link layer protocol used by network devices for

88

advertising their identity, capabilities to neighbors on a LAN segment.

Phone could use LLDP to find the VLAN switch or other VLAN devices and use LLDP learn feature to apply

the VLAN ID from VLAN switch to phone its self.

CDP

Cisco Discovery Protocol. CDP is a not-for-profit charity that runs the global disclosure system for investors,

companies, cities, states and regions to manage their environmental impacts. According to the CDP, Cisco

devices could share the OS version, IP address, hardware version and so on.

Table 13 - QoS & VLAN

Parameters Description

LLDP setting

Report Enable LLDP

Interval LLDP requests interval time

Learning apply the learned VLAN ID to the phone configuration

QoS

QoS Mode configure SIP DSCP and audio DSCP

WAN VLAN

WAN VLANWAN port VLAN configuration

LAN VLAN

LAN VLAN LAN port VLAN configuration

CDP

CDP CDP enable/disable CDP interval time

10.7.2.3 VPN

Virtual Private Network (VPN) is a technology to allow device to create a tunneling connection to a server and

becomes part of the servers network. The network transmission of the device may be routed through the

VPN server.

For some users, especially enterprise users, a VPN connection might be required to be established before

activate a line registration. The device supports two VPN modes, Layer 2 Transportation Protocol (L2TP) and

OpenVPN.

The VPN connection must be configured and started (or stopped) from the device web portal.

L2TP

NOTICE! The device only supports non-encrypted basic authentication and non-encrypted data

tunneling. For users who need data encryption, please use OpenVPN instead.

To establish a L2TP connection, users should log in to the device web portal, open webpage [Network] >>

[VPN]. In VPN Mode, check the Enable VPN option and select L2TP, then fill in the L2TP server address,

Authentication Username, and Authentication Password in the L2TP section. Press Apply then the device

will try to connect to the L2TP server.

89

When the VPN connection established, the VPN IP Address should be displayed in the VPN status. There

may be the delay of the connection establishment. User may need to refresh the page to update the status.

Once the VPN is configured, the device will try to connect with the VPN automatically when the device boots

up every time until user disable it. Sometimes, if the VPN connection does not establish immediately, user

may try to reboot the device and check if VPN connection established after reboot.

OpenVPN

To establish an OpenVPN connection, user should get the following authentication and configuration files

from the OpenVPN hosting provider and name them as the following,

OpenVPN Configuration file: client.ovpn

CA Root Certification: ca.crt

Client Certification: client.crt

Client Key: client.key

User then upload these files to the device in the web page [Network] >> [VPN], select OpenVPN Files. Then

user should check Enable VPN and select OpenVPN in VPN Mode and click Apply to enable OpenVPN

connection.

10.7.2.4 Web Server Type

Configure the Web Server mode to be HTTP or HTTPS and will be activated after the reboot. Then user could

use http/https protocol to access pone web page.

Picture 114 - The phone configures the web server type

10.7.3 Set The Secret Key

When the device is in the default standby mode,

Select [Menu] >> [Advanced setting], and enter it via [Confirm] or [OK] button.

As default, the Advance setting password is 123.

User will see the follow page after menu Advanced setting Security.

90

Picture 115 - Keypad lock password

Picture 116 - Keypad lock password

Menu password is the permission for accessing the advanced setting.

[Current password] is the password user configured before. If no configuration before, the default

password is 123.

[New password] is the new password user to use.

After configuring the menu password, it will work immediately.

91

Picture 117 - Phone keypad lock password input interface

Keyboard password is used to unlock the phone once its locked.

Picture 118 - Set keyboard lock password

User could only set to enable or disable the keyboard password in LCD screen.

Enter [Keyboard password] setting by pressing [confirm] or [OK] button after password entered. If no

menu password configuration before, it is 123 as default.

If the menu password is correct, phone will go to keyboard password interface. As default, the keyboard

password is disabled. When it is enabled, the keyboard will be locked after timeout.

If user does not configure the keyboard lock time, (it is 0 as default). Long pressing # will lock the phone.

There will be a lock icon in the top of LCD. Phone will reminder Enter Password after pressing any

keys.

92

Picture 119 - Phone keypad lock password input interface

Picture 120 - Web keyboard lock password Settings

10.7.4 Maintenance

Phone Webpage: Login and go to [System] >> [Auto provision].

93

Picture 121 - Page auto provision Settings

LCD: [Menu] >> [System] >> [Maintenance] >> [Auto Provision].

Picture 122 - Phone auto provision settings

devices support SIP PnP, DHCP options, Static provision, TR069. If all of the 4 methods are enabled, the

priority from high to low as below:

PNP>DHCP>TR069> Static Provisioning

Transferring protocol: FTP, TFTP, HTTP, HTTPS

Table 14 - Auto Provision

94

Parameters Description

Basic settings

CPE Serial Number Display the device SN

Authentication Name The user name of provision server

Authentication Password The password of provision server

Configuration File

Encryption Key

If the device configuration file is encrypted , user should add the encryption

key here

General Configuration File

Encryption Key

If the common configuration file is encrypted, user should add the encryption

key here

Download Fail Check

Times If there download is failed, phone will retry with the configured times.

Update Contact Interval

Phone will update the phonebook with the configured interval time. If it is 0,

the feature is disabled.

Save Auto Provision

Information

Save the HTTP/HTTPS/FTP user name and password. If the provision URL

is kept, the information will be kept.

Download Common

Config enabled Whether phone will download the common configuration file.

Enable Server Digest When the feature is enable, if the configuration of server is changed, phone

will download and update.

DHCP Option

Option Value

Confiugre DHCP option, DHCP option supports DHCP custom option |

DHCP option 66 | DHCP option 43, 3 methods to get the provision URL. The

default is Option 66.

Custom Option Value Custom Option value is allowed from 128 to 254. The option value must be

same as server define.

Enable DHCP Option 120 Use Option120 to get the SIP server address from DHCP server.

SIP Plug and Play (PnP)

Enable SIP PnP

Whether enable PnP or not. If PnP is enable, phone will send a SIP

SUBSCRIBE message with broadcast method. Any server can support the

feature will respond and send a Notify with URL to phone. Phone could get

the configuration file with the URL.

Server Address Broadcast address. As default, it is 224.0.0.0.

Server Port PnP port

Transport Protocol PnP protocol, TCP or UDP.

Update Interval PnP message interval.

Static Provisioning Server

Server Address Provisioning server address. Support both IP address and domain address.

Configuration File Name The configuration file name. If it is empty, phone will request the common file

95

and device file which is named as its MAC address.

The file name could be a common name, $mac.cfg, $input.cfg. The file

format supports CFG/TXT/XML.

Protocol Type Transferring protocol type supports FTPTFTPHTTP and HTTPS

Update Interval Configuration file update interval time. As default it is 1, means phone will

check the update every 1 hour.

Update Mode

Provision Mode.

1. Disabled.

2. Update after reboot.

3. Update after interval.

TR069

Enable TR069 Enable TR069 after selection

ACS Server Type There are 2 options Serve type, common and CTC.

ACS Server URL ACS server address

ACS User ACS server username (up to is 59 character)

ACS Password ACS server password (up to is 59 character)

Enable TR069 Warning

Tone If TR069 is enabled, there will be a prompt tone when connecting.

TLS Version TLS version (TLS 1.0, TLS 1.1, TLS 1.2)

INFORM Sending Period INFORM signal interval time. It ranges from 1s to 999s

STUN Server Address Configure STUN server address

STUN Enable To enable STUN server for TR069

10.7.5 Firmware Upgrade

Web page: Login phone web page, go to [System] >> [Upgrade].

96

Picture 123 - Web page firmware upgrade

LCD interface: go to [Menu] >> [System] >> [Firmware Upgrade] .

Picture 124 - Firmware upgrade information display

Table 15 - Firmware upgrade

Parameter Description

Upgrade server

Enable Auto Upgrade

Enable automatic upgrade, If there is a new version txt and new

software firmware on the server, phone will show a prompt upgrade

message after Update Interval.

Upgrade Server Address1 Set available upgrade server address.

Upgrade Server Address2 Set available upgrade server address.

97

Update Interval Set Update Interval.

Firmware Information

Current Software Version It will show Current Software Version.

Server Firmware Version It will show Server Firmware Version.

[Upgrade] button

If there is a new version txt and new software firmware on the server,

the page will display version information and upgrade button will

become available; Click [Upgrade] button to upgrade the new

firmware.

New version description

information

When there is a corresponding TXT file and version on the server

side, the TXT and version information will be displayed under the

new version description information.

The file requested from the server is a TXT file called vendor_model_hw10.txt.Hw followed by the

hardware version number, it will be written as hw10 if no difference on hardware. All Spaces in the

filename are replaced by underline.

The URL requested by the phone is HTTP:// server address/vendor_Model_hw10

.txt: The new version and the requested file should be placed in the download directory of the HTTP

server, as shown in the figure:

TXT file format must be UTF-8

vendor_model_hw10.TXT The file format is as follows

Version=1.6.3 #Firmware

Firmware=xxx/xxx.z #URLRelative paths are supported and absolute paths are possible,

distinguished by the presence of protocol headers.

BuildTime=2018.09.11 20:00

Info=TXT|XML

Xxxxx

Xxxxx

Xxxxx

Xxxxx

After the interval of update cycle arrives, if the server has available files and versions, the phone will

prompt as shown below. Click [view] to check the version information and upgrade.

98

10.7.6 Factory Reset

The phone is in default standby mode.

Press [Menu] to find [System], and press [OK].

Press [System] to enter the password (default password is 123) to enter the interface.

Press the [Restore factory Settings] button to select the file to be cleared.

Press [OK] to clear after completion. When you select clear configuration file and clear all, the phone will

restart automatically after clearing.

99

11 Web Configurations

11.1 Web Page Authentication

The user can log into the web page of the phone to manage the user's phone information and operate the

phone. Users must provide the correct user name and password to log in.

11.2 System >> Information

User can get the system information of the device in this page including,

Model

Hardware Version

Software Version

Uptime

And summarization of network status,

Network Mode

MAC Address

IP

Subnet Mask

Default Gateway

Besides, summarization of SIP account status,

SIP User

SIP account status (Registered / Unapplied / Trying / Timeout )

11.3 System >> Account

On this page the user can change the password for the login page.

Users with administrator rights can also add or delete users, manage users, and set permissions and

passwords for new users.

11.4 System >> Configurations

On this page, users with administrator privileges can view, export, or import the phone configuration, or

restore the phone to factory Settings.

Clear Configurations

Select the module in the configuration file to clear.

SIP: account configuration.

AUTOPROVISION: automatically upgrades the configuration

TR069:TR069 related configuration

MMI: MMI module, including authentication user information, web access protocol, etc.

100

DSS Key: DSS Key configuration

Clear Data Tables

Select the local data table to be cleared, all selected by default.

Reset Phone

The phone data will be cleared, including configuration and database tables.

11.5 System >> Upgrade

Upgrade the phone software version, customized ringtone, background, DSS Key icon, etc., can also be

upgraded to delete the file. Ring tone support .wav format.

11.6 System >> Auto Provision

The Auto Provision settings help IT manager or service provider to easily deploy and manage the devices in

mass volume.

11.7 System >> Tools

Tools provided in this page help users to identify issues at trouble shooting. Please refer to 13 Trouble

Shootingfor more detail.

11.8 System >> Reboot Phone

This page can restart the phone.

101

12 Network >> Basic

This page allows users to configure network connection types and parameters.

12.1 Network >> Wi-Fi Settings

The default network priority is WiFi

The current device supports coexistence of wifi and Ethernet, and users can log in to the web page with any

network address for configuration

For example, WiFi access IP is 172.16.19.19 and Ethernet access IP is 172.16.12.63

Page login 172.16.12.63, 172.16.19.19 Any network address login page for configuration

Picture 125 - Network Priority

This page can turn on WiFi, add WiFi information, and view the wireless network list.

102

Picture 126 - WiFi Settings

12.2 Network >> Service Port

This page provides settings for Web page login protocol, protocol port settings and RTP port.

Picture 127 - Service Port Settings

Table 16 - Service port

Parameter Description

Web Server Type Reboot to take effect after settings. Optionally, the web page login is

HTTP/HTTPS.

Web Logon Timeout Default as 15 minutes, the timeout will automatically exit the login page,

need to login again.

Web auto login After the timeout does not need to enter a user name password, will

automatically login to the web page.

HTTP Port

The default is 80. If you want system security, you can set ports other than

80.

Such as :8080, webpage login: HTTP://ip:8080

103

HTTPS Port The default is 443, the same as the HTTP port.

RTP Port Range Start The value range is 1025 to 65535. The value of RTP port starts from the

initial value set. For each call, the value of voice and video port is added 2.

RTP Port Quantity Number of calls.

12.3 Network >> VPN

Users can configure a VPN connection on this page. See 10.7.2.3 VPN for more details.

12.4 Network >> Advanced

Advanced network Settings are typically configured by the IT administrator to improve the quality of the

phone service. For configuration, query the 10.7 advanced Settings.

12.5 Line >> SIP

Configure the Line service configuration on this page.

Table 17 - Line configuration on the web page

Parameters Description

Register Settings

Line Status Display the current line status at page loading. To get the up to date line

status, user has to refresh the page manually.

Activate Whether the service of the line is activated

Username Enter the username of the service account.

Authentication User Enter the authentication user of the service account

Display Name Enter the display name to be sent in a call request.

Authentication Password Enter the authentication password of the service account

Realm Enter the SIP domain if requested by the service provider

Server Name Input server name.

SIP Server 1

Server Address Enter the IP or FQDN address of the SIP server

Server Port Enter the SIP server port, default is 5060

Transport Protocol Set up the SIP transport line using TCP or UDP or TLS.

Registration Expiration Set SIP expiration date.

SIP Server 2

Server Address Enter the IP or FQDN address of the SIP server

Server Port Enter the SIP server port, default is 5060

Transport Protocol Set up the SIP transport line using TCP or UDP or TLS.

104

Registration Expiration Set SIP expiration date.

SIP Proxy Server Address Enter the IP or FQDN address of the SIP proxy server.

Proxy Server Port Enter the SIP proxy server port, default is 5060.

Proxy User Enter the SIP proxy user.

Proxy Password Enter the SIP proxy password.

Backup Proxy Server

Address Enter the IP or FQDN address of the backup proxy server.

Backup Proxy Server Port Enter the backup proxy server port, default is 5060.

Basic Settings

Enable Auto Answering Enable auto-answering, the incoming calls will be answered automatically

after the delay time

Auto Answering Delay Set the delay for incoming call before the system automatically answered it

Call Forward

Unconditional

Enable unconditional call forward, all incoming calls will be forwarded to the

number specified in the next field

Call Forward Number for

Unconditional Set the number of unconditional call forward

Call Forward on Busy Enable call forward on busy, when the phone is busy, any incoming call will

be forwarded to the number specified in the next field.

Call Forward Number for

Busy Set the number of call forward on busy .

Call Forward on No

Answer

Enable call forward on no answer, when an incoming call is not answered

within the configured delay time, the call will be forwarded to the number

specified in the next field.

Call Forward Number for

No Answer Set the number of call forward on no answer.

Call Forward Delay for No

Answer Set the delay time of not answered call before being forwarded.

Transfer Timeout Set the timeout of call transfer process.

Conference Type

Set the type of call conference, Local=set up call conference by the device

itself, maximum supports two remote parties, Server=set up call

conference by dialing to a conference room on the server

Server Conference

Number Set the conference room number when conference type is set to be Server

Subscribe For Voice

Message

Enable the device to subscribe a voice message waiting notification, if

enabled, the device will receive notification from the server if there is voice

message waiting on the server

Voice Message Number Set the number for retrieving voice message

Voice Message Subscribe Set the interval of voice message notification subscription

105

Period

Enable Hotline

Enabling hotline configuration, the device will dial to the specific number

immediately at audio channel opened by off-hook handset or turn on

hands-free speaker or headphone

Hotline Delay Set the delay for hotline before the system automatically dialed it

Hotline Number Set the hotline dialing number

Dial Without Registered

Set call out by proxy without registration

Enable Missed Call Log If enabled, the phone will save missed calls into the call history record.

DTMF Type Set the DTMF type to be used for the line

DTMF SIP INFO Mode Set the SIP INFO mode to send * and # or 10 and 11

Enable DND Enable Do-not-disturb, any incoming call to this line will be rejected

automatically

Subscribe For Voice

Message

Enable the device to subscribe a voice message waiting notification, if

enabled, the device will receive notification from the server if there is voice

message waiting on the server

Use VPN Set the line to use VPN restrict route

Use STUN Set the line to use STUN for NAT traversal

Enable Failback Whether to switch to the primary server when it is available.

Failback Interval A Register message is used to periodically detect the time interval for the

availability of the main Proxy.

Signal Failback Multiple proxy cases, whether to allow the invite/register request to also

execute failback.

Signal Retry Counts The number of attempts that the SIP Request considers proxy unavailable

under multiple proxy scenarios.

Codecs Settings Set the priority and availability of the codecs by adding or remove them

from the list.

Video Codecs Select video code to preview video.

Advanced Settings

Use Feature Code

When this setting is enabled, the features in this section will not be handled

by the device itself but by the server instead. In order to control the

enabling of the features, the device will send feature code to the server by

dialing the number specified in each feature code field.

Enable DND Set the feature code to dial to the server

Disable DND Set the feature code to dial to the server

Enable Call Forward

Unconditional Set the feature code to dial to the server

Disable Call Forward Set the feature code to dial to the server

106

Unconditional

Enable Call Forward on

Busy Set the feature code to dial to the server

Disable Call Forward on

Busy Set the feature code to dial to the server

Enable Call Forward on

No Answer Set the feature code to dial to the server

Disable Call Forward on

No Answer Set the feature code to dial to the server

Enable Blocking

Anonymous Call Set the feature code to dial to the server

Disable Blocking

Anonymous Call Set the feature code to dial to the server

Call Waiting On Code Set the feature code to dial to the server

Call Waiting Off Code Set the feature code to dial to the server

Send Anonymous On

Code Set the feature code to dial to the server

Send Anonymous Off

Code Set the feature code to dial to the server

SIP Encryption Enable SIP encryption such that SIP transmission will be encrypted

RTP Encryption Enable RTP encryption such that RTP transmission will be encrypted

Enable Session Timer

Set the line to enable call ending by session timer refreshment. The call

session will be ended if there is not new session timer event update

received after the timeout period

Session Timeout Set the session timer timeout period

Enable BLF List Enable/Disable BLF List

BLF List Number BLF List allows one BLF key to monitor the status of a group. Multiple BLF

lists are supported.

Response Single Codec If setting enabled, the device will use single codec in response to an

incoming call request

BLF Server

The registered server will receive the subscription package from ordinary

application of BLF phone.

Please enter the BLF server, if the sever does not support subscription

package, the registered server and subscription server will be separated.

Keep Alive Type Set the line to use dummy UDP or SIP OPTION packet to keep NAT

pinhole opened

Keep Alive Interval Set the keep alive packet transmitting interval

Keep Authentication Keep the authentication parameters from previous authentication

107

Blocking Anonymous Call Reject any incoming call without presenting caller ID

User Agent Set the user agent, the default is Model with Software Version.

Specific Server Type Set the line to collaborate with specific server type

SIP Version Set the SIP version

Anonymous Call Standard Set the standard to be used for anonymous

Local Port Set the local port

Ring Type Set the ring tone type for the line

Enable user=phone Sets user=phone in SIP messages.

Use Tel Call Set use tel call

Auto TCP Using TCP protocol to guarantee usability of transport for SIP messages

above 1500 bytes

Enable Rport Set the line to add rport in SIP headers

Enable PRACK Set the line to support PRACK SIP message

DNS Mode Select DNS mode, A, SRV, NAPTR

Enable Long Contact Allow more parameters in contact field per RFC 3840

Enable Strict Proxy Enables the use of strict routing. When the phone receives packets from

the server, it will use the source IP address, not the address in via field.

Convert URI Convert not digit and alphabet characters to %hh hex code

Use Quote in Display

Name Whether to add quote in display name, i.e.

Enable GRUU Support Globally Routable User-Agent URI (GRUU)

Sync Clock Time Time Sync with server

Enable Inactive Hold With the post-call hold capture package enabled, you can see that in the

INVITE package, SDP is inactive.

Caller ID Header Set the Caller ID Header

Use 182 Response for

Call waiting Set the device to use 182 response code at call waiting response

Enable Feature Sync Feature Sync with server

Enable SCA Enable/Disable SCA (Shared Call Appearance )

CallPark Number Set the CallPark number.

Server Expire Set the timeout to use the server.

TLS Version Choose TLS Version.

uaCSTA Number Set uaCSTA Number.

Enable Click To Talk With the use of special server, click to call out directly after enabling.

Flash mode Chose Flash mode, normal or SIP info.

Flash Info Content-Type Set the SIP info content type.

Flash Info Content-Body Set the SIP info content body.

108

PickUp Number Set the scramble number when the Pickup is enabled.

JoinCall Number Set JoinCall Number.

Intercom Number Set Intercom Number.

Unregister On Boot Whether to enable logout function.

Enable MAC Header When opening the registration, are IP package and user agent with MAC.

Enable Register MAC

Header When opening the registration, is user agent with MAC.

BLF Dialog Strict Match Whether to enable accurate matching of BLF sessions.

PTime(ms)Set whether to bring ptime field, default no.

SIP Global Settings

Strict Branch Set up to strictly match the Branch field.

Enable Group Set open group.

Enable RFC4475 Set to enable RFC4475.

Enable Strict UA Match Enable strict UA matching.

Registration Failure Retry

Time Set the registration failure retry time.

Local SIP Port Modify the phone SIP port.

12.6 Line >> SIP Hotspot

Please refer to 9.9 SIP Hotspot.

12.7 Line >> Dial Plan

Picture 128 - Dial plan settings

Table 18 - Phone dialing methods

Parameters Description

Press # to invoke dialing The user dials the other party's number and then adds the # number

109

to dial out;

Dial Fixed Length The number entered by the user is automatically dialed out when it

reaches a fixed length

Timeout dial The system dials automatically after timeout

Press # to Do Blind Transfer The user enters the number to be transferred and then presses the

"#" key to transfer the current call to a third party

Blind Transfer on Onhook After the user enters the number, hang up the handle or turn off the

hands-free function to transfer the current call to a third party.

Attended Transfer on Onhook

Hang up the handle or press the hands-free button to realize the

function of attention-transfer, which can transfer the current call to a

third party.

Attended Transfer on

Conference Onhook

During a three-way call, hang up the handle and the remaining two

parties remain on the call.

Enable E.164 Please refer to e. 164 standard specification

Picture 129 - Custom setting of dial - up rules

Table 19 - Dial - up rule configuration table

Parameters Description

Dial rule There are two types of matching: Full Matching or Prefix Matching. In Full

110

matching, the entire phone number is entered and then mapped per the Dial

Peer rules.

In prefix matching, only part of the number is entered followed by T. The

mapping with then take place whenever these digits are dialed. Prefix mode

supports a maximum of 30 digits.

Note: Two different special characters are used.

x -- Matches any single digit that is dialed.

[ ] -- Specifies a range of numbers to be matched. It may be a range, a list of ranges separated

by commas, or a list of digits.

Destination Set Destination address. This is for IP direct.

Port Set the Signal port, and the default is 5060 for SIP.

Alias Set the Alias. This is the text to be added, replaced or deleted. It is an optional

item.

Note: There are four types of aliases.

all: xxx xxx will replace the phone number.

add: xxx xxx will be dialed before any phone number.

del The characters will be deleted from the phone number.

rep: xxx xxx will be substituted for the specified characters.

Suffix Characters to be added at the end of the phone number. It is an optional item.

Length Set the number of characters to be deleted. For example, if this is set to 3, the

phone will delete the first 3 digits of the phone number. It is an optional item.

his feature allows the user to create rules to make dialing easier. There are several different options for dial

rules. The examples below will show how this can be used.

Example 1: All Substitution -- Assume that it can make a direct IP call to IP address 172.168.2.208. Using

this feature, 123 can be substituted for 172.168.2.208.

Picture 130 - Dial rules table (1)

Example 2: Partial Substitution -- To dial a long distance call to Beijing requires dialing area code 010 before

the local phone number. Using this feature 1 can be substituted for 010. For example, to call 62213123

would only require dialing 162213123 instead of 01062213123.

111

Picture 131 - Dial rules table (2)

Example 3: Addition -- Two examples are shown. In the first case, it is assumed that 0 must be dialed before

any 11 digit number beginning with 13. In the second case, it is assumed that 0 must be dialed before any 11

digit number beginning with 135, 136, 137, 138, or 139. Two different special characters are used.

x -- Matches any single digit that is dialed.

[] -- Specifies a range of numbers to be matched. It may be a range, a list of ranges separated by commas, or

a list of digits.

12.8 Line >> Action Plan

1. When a IP phone calls a phone, the bound IP camera synchronously transmits video to the other phone

(video is supported)

2. When SIP calls, multicast calls or intercom calls are made, the device converts calls that conform to the

number rules into group calls.

Table 20 - IP camera

Parameter Description

Number Auxiliary phone number (support video)

Type Support video display on call.

Direction For call mode, incoming/outgoing call displays video

Line Set up outgoing lines.

Username Bind the user name of the IP camera.

Password Bind IP camera password.

URL Video streaming information;Mcast Address

(mcast://IP:port)

User Agent Set user agent information

12.9 Line >> Basic Settings

Set up the register global configuration.

Table 21 - Set the line global configuration on the web page

Parameters Description

STUN Settings

Server Address Set the STUN server address

Server Port Set the STUN server port, default is 3478

Binding Period Set the STUN binding period which can be used to keep the NAT pinhole

opened.

SIP Waiting Time Set the timeout of STUN binding before sending SIP messages

112

The TLS authentication

TLS Certification File Upload or delete the TLS certification file used for encrypted SIP

transmission.

12.10 Line >> RTCP-XR

RTCP-XR mode is based on RFC3611 (RTP Control Extended Report), which can measure and evaluate

network packet loss, delay and voice quality by sending RTCP-XR packets.

Table 22 - VQ RTCP-XR Settings

Parameters Description

VQ RTCP-XR Settings

VQ RTCP-XR Session Report VQ report on whether session mode is enabled or not.

VQ RTCP-XR Interval Report Whether to turn on Interval mode for VQ report sending.

Period for Interval Report(5~99) The time interval at which VQ reports are sent periodically.

Warning threshold for Moslq(15~40) When the phone calculated the Moslq value x10 below the

set threshold, a warning was issued.

Critical threshold for Moslq(15~40) When the phone calculates the Moslq value x10 below the

set threshold, the critical report is issued.

Warning Threshold for Delay(10~2000) When the one-way delay of the phone is greater than the

set threshold, warning is issued.

Critical Threshold for Delay(10~2000) When the phone computes that the one-way delay is

greater than the set threshold, the critical report is issued.

Display Report Options on web Whether to display the VQ report data for the last call

through the web page.

12.11 Phone settings >> Features

Configuration phone features.

Table 23 - General function Settings

Parameters Description

Basic Settings

Enable Call Waiting Enable this setting to allow user to take second incoming call during an

established call. Default enabled.

Enable Call Transfer Enable Call Transfer.

Semi-Attended Transfer Enable Semi-Attended Transfer by selecting it

Enable 3-Way Conference Enable 3-way conference by selecting it

113

Enable Auto Onhook The phone will hang up and return to the idle automatically at hands-free

mode

Auto Onhook Time

Specify Auto Onhook time, the phone will hang up and return to the idle

automatically after Auto Hand down time at hands-free mode, and play

dial tone Auto Onhook time at handset mode

Ring for Headset Enable Ring for Handset by selecting it, the phone plays ring tone from

handset.

Auto Headset Enable this feature, headset plugged in the phone, user press answer

key or line key to answer a call with the headset automatically.

Enable Silent Mode When enabled, the phone is muted, there is no ringing when calls, you

can use the volume keys and mute key to unmute.

Disable Mute for Ring When it is enabled, you cant mute the phone

Enable Default Line If enabled, user can assign default SIP line for dialing out rather than

SIP1.

Enable Auto Switch Line Enable phone to select an available SIP line as default automatically

Default Ext Line Select the default line to use for outgoing calls

Ban Outgoing If you select Ban Outgoing to enable it, and you cannot dial out any

number.

Hide DTMF Configure the hide DTMF mode.

Enable CallLog Select whether to save the call log.

Enable Restricted Incoming

List Whether to enable restricted call list.

Enable Allowed Incoming

List Whether to enable the allowed call list.

Enable Restricted Outgoing

List Whether to enable the restricted allocation list.

Enable Country Code Whether the country code is enabled.

Country Code Fill in the country code.

Area Code Fill in the area code.

Enable Number Privacy Whether to enable number privacy.

Match Direction Matching direction, there are two kinds of rules from right to left and from

left to right.

Start Position Open number privacy after the start of the hidden location.

Hide Digits Turn on number privacy to hide the number of digits.

Allow IP Call If enabled, user can dial out with IP address

P2P IP Prefix Prefix a point-to-point IP call.

Caller Name Priority Change caller ID display priority.

Emergency Call Number Set Emergency Call Number

114

Search path Select the search path.

LDAP Search Select from with one LDAP for search

Emergency Call Number Configure the Emergency Call Number. Despite the keyboard is locked,

you can dial the emergency call number

Restrict Active URI Source

IP Set the device to accept Active URI command from specific IP address.

Push XML Server

Configure the Push XML Server, when phone receives request, it will

determine whether to display corresponding content on the phone which

sent by the specified server or not.

Enable Pre-Dial

Disable this feature, user enter number will open audio channel

automatically.

Enable the feature, user enter the number without opening audio channel.

Enable Multi Line If enabled, up to 10 simultaneous calls can exist on the phone, and if

disabled, up to 2 simultaneous calls can exist on the phone.

Line Display Format Custom line format: SIPn/SIPn: xxx/xxx@SIPn

Contact As White List Type NONE/BOTH/DND White List/FWD White List

Block XML When Call Disable XML push on call.

SIP notify When enabled, the phone displays the information when it receives the

relevant notify content.

Tone Settings

Enable Holding Tone When turned on, a tone plays when the call is held

Enable Call Waiting Tone When turned on, a tone plays when call waiting

Play Dialing DTMF Tone Play DTMF tone on the device when user pressed a phone digits at

dialing, default enabled.

Play Talking DTMF Tone Play DTMF tone on the device when user pressed a phone digits during

taking, default enabled.

DND Settings

DND Option Select to take effect on the line or on the phone or close.

Enable DND Timer Enable DND Timer, If enabled, the DND is automatically turned on from

the start time to the off time.

DND Start Time Set DND Start Time

DND End Time Set DND End Time

Intercom Settings

Enable Intercom

When intercom is enabled, the device will accept the incoming call

request with a SIP header of Alert-Info instruction to automatically answer

the call after specific delay.

Enable Intercom Mute Enable mute mode during the intercom call

Enable Intercom Tone If the incoming call is intercom call, the phone plays the intercom tone

115

Enable Intercom Barge

Enable Intercom Barge by selecting it, the phone auto answers the

intercom call during a call. If the current call is intercom call, the phone will

reject the second intercom call

Response Code Settings

DND Response Code Set the SIP response code on call rejection on DND

Busy Response Code Set the SIP response code on line busy

Reject Response Code Set the SIP response code on call rejection

Password Dial Settings

Enable Password Dial

Enable Password Dial by selecting it, When number entered is beginning

with the password prefix, the following N numbers after the password

prefix will be hidden as *, N stand for the value which you enter in the

Password Length field. For example: you set the password prefix is 3,

enter the Password Length is 2, then you enter the number 34567, it will

display 3**67 on the phone.

Encryption Number Length Configure the Encryption Number length

Password Dial Prefix Configure the prefix of the password call number

Power LED

Common Standby power lamp state, off when off, open is always bright red. Off by

default.

SMS/MWI The status of power lamp when there is unread short message/voice

message, including off/on/slow flash/quick flash, default slow flash.

Missed The state of the power lamp when there is a missed call, including

off/on/slow flash/quick flash, the default slow flash.

Talk/Dial In the talk/dial state, the power lamp state, off is off, on is always red

bright, the default is off.

Ringing Power lamp status when there is an incoming call, including off/on/slow

flash/quick flash, default flash.

Mute Power lamp status in mute mode, including off/on/slow flash/quick flash,

off by default.

Hold/Held The power lamp state, including off/on/slow flash/quick flash, is turned off

by default when left/retained.

Notification Popups

Display Missed Call Popup No incoming call popup prompt after opening, no popup prompt when

closing, open by default.

Display MWI Popup Voice message popup prompt is not answered after opening, and it is

opened by default if there is no popup prompt when closing.

Display Device Connect

Popup

There is a popup prompt when the WIFI adapter is connected. There is no

popup prompt when the WIFI adapter is closed. It is on by default.

116

Display SMS Popup There is popup prompt for unread messages after opening, and there is

no popup prompt when closing. It is opened by default.

Display Other Popup

When the handle is not hung back after opening, registration fails, IP

acquisition fails, Tr069 connection fails and other abnormalities, there will

be popup prompt when it is opened; otherwise, there will be no prompt

when it is closed, and it will be opened by default.

12.12 Phone settings >> Media Settings

Change voice Settings.

Table 24 - Voice settings

Parameters Description

Codecs Settings

Select enable or disable voice encoding:

G.711A/U,G.722,G.729, G.726-16,G726-24,G726-32,G.726-40,

ILBC, Opus

Audio Settings

Handset Volume Set the Handset volume, the value must be 1~9

Default Ring Type Configure default ringtones. If no special ringtone is set for the phone

number, the default ringtone will be used.

Speakerphone Volume Set the hands-free volume to 1-9.

Headset Ring Volume Set the volume of the earphone ringtone to 1~9.

Headset Volume Set the volume of the headset to 1~9.

Speakerphone Ring Volume Set the volume of hands-free ringtone to 1~9.

G.723.1 Bit Rate 5.3kb/s or 6.3kb/s is available.

DTMF Payload Type Enter the DTMF payload type, the value must be 96~127.

AMR Payload Type Set AMR load type, range 96~127.

Headset Mic Gain Set the earphone's radio volume gain to fit different models of earphones.

Opus playload type Set Opus load type, range 96~127.

OPUS Sample Rate Set Opus sampling rate, including opus-nb (8KHz) and opus-wb (16KHz).

ILBC Payload Type Set the ILBC Payload Type, the value must be 96~127.

ILBC Payload Length Set the ILBC Payload Length

Enable MWI Tone When there is a new voice message message, the phone will start a

special dial tone.

Enable VAD Whether voice activity detection is enabled.

Onhook Time Configure a minimum response time, which defaults to 200ms

EHS Type EHS headset is available after enabling.

RTP Control Protocol(RTCP) Settings

117

CNAME user Set CNAME user

CNAME host Set CNAME host

RTP Settings

RTP keep alive Hold the call and send the packet after 30s

Alert Info Ring Settings

Value Set the value to specify the ring type.

Ring Type Type1-Type9

12.13 Phone settings >> MCAST

This feature allows user to make some kind of broadcast call to people who are in multicast group. User can

configure a multicast DSS Key on the phone, which allows user to send a Real Time Transport Protocol (RTP)

stream to the pre-configured multicast address without involving SIP signaling. You can also configure the

phone to receive an RTP stream from pre-configured multicast listening address without involving SIP

signaling. You can specify up to 10 multicast listening addresses.

Table 25 - Multicast parameters

Parameters Description

Normal Call Priority Define the priority of the active call, 1 is the highest priority, 10 is the lowest.

Enable Page Priority The voice call in progress shall take precedence over all incoming paging

calls.

Name Listened multicast server name

Host: port Listened multicast servers multicast IP address and port.

12.14 Phone settings >> Action

Action URL

Note! Action urls are used for IPPBX systems to submit phone events.

12.15 Phone settings >> Time/Date

The user can configure the time Settings of the phone on this page.

Table 26 - Time&Date settings

Parameters Description

Network Time Server Settings

Time Synchronized via SNTP Enable time-sync through SNTP protocol

Time Synchronized via DHCP Enable time-sync through DHCP protocol

Primary Time Server Set primary time server address

118

Secondary Time Server

Set secondary time server address, when primary server is not

reachable, the device will try to connect to secondary time server to

get time synchronization.

Time Zone Select the time zone

Resync Period Time of re-synchronization with time server

12-Hour Clock Set the time display in 12-hour mode

Date Format Select the time/date display format

Daylight Saving Time Settings

Local Choose your local, phone will set daylight saving time automatically

based on the local

DST Set Type Choose DST Set Type, if Manual, you need to set the start time and

end time.

Fixed Type

Daylight saving time rules are based on specific dates or relative

rule dates for conversion. Display in read-only mode in automatic

mode.

Offset The offset minutes when DST started

Month Start The DST start month

Week Start The DST start week

Weekday Start The DST start weekday

Hour Start The DST start hour

Minute Start The DST start minute

Month End The DST end month

Week End The DST end week

Weekday End The DST end weekday

Hour End The DST end hour

Minute End The DST end minute

Manual Time Settings You can set your time manually

12.16 Phone settings >> Tone

This page allows users to configure a phone prompt.

You can either select the country area or customize the area. If the area is selected, it will bring out the

following information directly. If you choose to customize the area, you can modify the button tone, call back

tone and other information.

119

Picture 132 - Tone settings on the web

12.17 Phone settings >> Advanced

User can configure the advanced configuration settings in this page.

Screen Configuration.

Enable Energy Saving

Backlight Time

LCD Menu Password Settings.

The password is 123 by default.

Keyboard Lock Settings.

Configure Greeting Words

The greeting message will display on the top left corner of the LCD when the device is idle, which is limited to

16 characters. The default chars are VOIP PHONE.

12.18 Phonebook >> Contact

User can add, delete, or edit contacts in the phonebook in this page. User can browse the phonebook and

sorting it by name, phones, or filter them out by group.

To add a new contact, user should enter contacts information and press Add button to add it.

To edit a contact, click on the checkbox in front of the contact, the contact information will be copied to the

contact edit boxes, press Modify button after finished editing.

To delete one or multiple contacts, check on the checkbox in front of the contacts wished to be deleted and

click the Delete button, or click the Clear button with selecting any contacts to clear the phonebook.

120

User can also add multiple contacts into a group by selecting the group in the dropdown options in front of

Add to Group button at the bottom of the contact list, selecting contacts with checkbox and click Add to

Group to add selected contacts into the group.

Similarly, user can select multiple users and add them into blacklist by click Add to Blacklist button.

12.19 Phonebook >> Cloud phonebook

Cloud Phonebook

User can configure up to 8 cloud phonebooks. Each cloud phonebook must be configured with an URL where

an XML phonebook is stored. The URL may be based on HTTP/HTTPs or FTP protocol with or without

authentication. If authentication is required, user must configure the username and password.

To configure a cloud phonebook, the following information should be entered,

Phonebook name (must)

Phonebook URL (must)

Access username (optional)

Access password (optional)

LDAP Settings

The cloud phonebook allows user to retrieve contact list from a LDAP Server through LDAP protocols.

User must configure the LDAP Server information and Search Base to be able to use it on the device. If the

LDAP server requests an authentication, user should also provide username and password.

To configure a LDAP phonebook, the following information should be entered,

Display Title (must)

LDAP Server Address (must)

LDAP Server Port (must)

Search Base (must)

Access username (optional)

Access password (optional)

Web page preview

Phone page supports preview of Internet phone directory and contacts

After setting up the XML Voip directory or LDAP,

Select [Phone book] >> [Cloud phone book] >> [Cloud phone book] to select the type.

Click the set XML/LDAP to download the contact for browsing.

121

Picture 133 - Web cloud phone book Settings

12.20 Phonebook >> Call List

Restricted Incoming Calls:

It is similar like a blacklist. Add the number to the blacklist, and the user will no longer receive calls from the

stored number until the user removes it from the list.

Users can add specific Numbers to the blacklist or add specific prefixes to the blacklist to block calls with all

Numbers with this prefix.

Allowed Incoming Calls:

When DND is enabled, the incoming call number can still be called.

Restricted Outgoing Calls:

Adds a number that restricts outgoing calls and cannot be called until the number is removed from the table.

12.21 Phonebook >> Web Dial

Use web pages for call, reply, and hang up operations.

12.22 Phonebook >> Advanced

Users can export the local phone book in XML, CSV, and VCF format and save it on the local computer.

Users can also import contacts into the phone book in XML, CSV, and VCF formats.

Attention! If the user imports the same phone book repeatedly, the same contact will be ignored. If

the name is the same but the number is different, the contact is created again.

Users can delete groups or add new groups on this page. Deleting a contact group does not delete contacts

in that group.

122

12.23 Call Log

The user can browse the complete call record in this page. The call record can be sorted by time. Call number,

contact name or line, and the call record can be screened by call record type (incoming call, outgoing call,

missed call, forward call).

The user can also save the number in the call record to his/her phone book or add it to the blacklist/whitelist.

Users can also dial the web page by clicking on the number in the call log.

Users can also download call records conditionally and save them locally.

12.24 Function Key >> Side Key

Side Key is a Key on both sides of the screen that functions as a shortcut Key. The default configuration is

line Key, which can be customized in the webpage

Table 27 - Side Key configuration

Parameters Description

Memory Key

BLF (New Call/BXFE /AXFER): It is used to prompt user the state of the subscribe

extension, and it can also pick up the subscribed number, which help user monitor the

state of subscribe extension (idle, ringing, a call). There are 3 types for one-touch BLF

transfer method.

p.s. User should enter the pick-up number for specific BLF key to fulfill the pick-up

operation.

Presence: Compared to BLF, the Presence is also able to view whether the user is

online.

Note: You cannot subscribe the same number for BLF and Presence at the same time

Speed Dial: You can call the number directly which you set. This feature is convenient

for you to dial the number which you frequently dialed.

Intercom: This feature allows the operator or the secretary to connect the phone

quickly; it is widely used in office environments.

Line It can be configured as a Line Key. User is able to make a call by pressing Line Key.

Key Event User can select a key event as a shortcut to trigger.

For example: MWI / DND / Release / Headset / Hold / etc.

DTMF It allows user to dial or edit dial number easily.

URL Open the specific URL directly.

Multicast Configure the multicast address and audio codec. User presses the key to initiate the

multicast.

Action URL The user can use a specific URL to make basic calls to the phone.

XML browser Users can set the DSS Key for specific URL download and other operations.

123

12.25 Function Key >> Softkey

The User Settings mode and display style, display page.

Table 28 - Softkey configuration

Parameter Description

Softkey Mode

Softkey mode Disabled and MoreDefault is Disabled

Softkey Style

Softkey display style Softkey Exit on Left or Right

Screen

Call Dialer

Redial/2aB/Delete/Exit/Call Back/Dial/Join/MWI/Local Contacts/Pickup/Call

Log/Missed/Clear/ln/Dialed/Pause/ Next line/Prev

line/Headset/Audio/Video/Remote XML/DSS Key

Conference Hold/Split/End/Release/Mute/DSS Key/Headset

Desktop

Call Log/Menu/Local Contacts/DND/Prev Account/Next Account/Blacklist/Call

Back/Call Forward/Locked/Memo/

Missed/MWI/Dialed/Reboot/Redial/Remote XML/SMS/

Headset/Status/DSS Key/ln

Divert Dialed

Redial/2aB/Delete/Exit/Forward/Local Contacts/Call Log

/Clear/Missed/Dialed/Headset/Video/Audio/Remote XML

/DSS Key

Ending Redial/End/Headset/Release/DSS Key

Predictive Dialer

Dial/2aB/Delete/Exit/Call Back/Local Contacts/Redial

/Pickup/MWI/Join/Call Log/Release/Missed/Pause/Dialed/

Headset/Video/Audio/Remote XML/DSS Key/ln/Next line

/Prev line

Ringing Answer/Forward/Reject/Mute/Release/Headset/Video/Audio/DSS key

Talking

Hold/Transfer/Conference/End/Mute/Release/New Call/

Local Contacts/Listen/Call Log/Next call/Prev call/

Private/Headset/Video/Audio/DSS Key

Transfer Alerting End/Transfer/Headset/Release/DSS Key

Transfer Dialer

Redial/Delete/Exit/2aB/Dial/Local Contacts/Transfer/

Call Log/Clear/Missed/Dialed/Pause/Headset/Video/Audio/Remote XML/DSS

Key

Trying End/Release/Headset/DSS Key

Waiting Hold/Transfer/Conference/End/Answer/Forward/Mute/Next call/New call/Prev

call/Reject/Release/Headset/Listen/

124

Video/Audio/DSS Key

12.26 Function Key >> Advanced

One key transfer: for example, set the memory key 4370. Press the memory key when talking with 4374 to

decide whether to call 4370 or transfer 4374 to 4370.

Select memory key function: for example, the phone set the memory key value to 4370. When 4370 calls,

press this key to hold the call or hang up.

Global Key Settings

Picture 134 - Global Key Settings

Programmable key Settings

Please refer to the Table 25 Softkey configuration

12.27 Application >> Manage Recording

See 9.3 Record for details of recording.

12.28 Security >> Web Filter

The user can set up a configuration management phone that allows only machines with a certain network

segment IP access.

Picture 135 - Web Filter settings

125

Picture 136 - Web Filter Table

Adding and removing IP segments are accessible. Configure the starting IP address within the start IP, end

the IP address within the end IP, and click [Add] to submit to take effect. A large network segment can be set,

or it can be divided into several network segments to add. If the user wants to delete, select the initial IP of the

network segment to be deleted from the drop-down menu, and then click [Delete] to take effect.

Enable web page filtering: configure enable/disable web page access filtering; Click the "apply" button to take

effect.

Note: if the device you are accessing is in the same network segment as the phone, please do not configure

the filter segment of the web page to be outside your own network segment, otherwise you will not be able to

log in the web page.

12.29 Security >> Trust Certificates

Set whether to open license certificate and general name validation, select certificate module.

You can upload and delete uploaded certificates.

Picture 137 - Certificate of settings

12.30 Security >> Device Certificates

Select the device certificate as the default and custom certificate.

126

You can upload and delete uploaded certificates.

Picture 138 - Device certificate setting

12.31 Security >> Firewall

Picture 139 - Network firewall Settings

The user can set whether to enable the input through this page, output firewall and set the firewall input and

output rules. Using these Settings can prevent some malicious network access, or restrict internal users

access to some resources of the external network, which can improve security.

Firewall rule set is a simple firewall module. This feature supports two types of rules: input rules and output

127

rules. Each rule is assigned an ordinal number, allowing up to 10 for each rule.

Considering the complexity of firewall Settings, the following is an example to illustrate:

Table 29 - Network Firewall

Parameter Description

Enable Input Rules Indicates that the input rule application is enabled.

Enable Output Rules Indicates that the output rule application is enabled.

Input/Output To select whether the currently added rule is an input or output rule.

Deny/Permit To select whether the current rule configuration is disabled or allowed;

Protocol There are four types of filtering protocols: TCP | UDP | ICMP | IP.

Src Port Range Filter port range

Src Address

Source address can be host address, network address, or all addresses

0.0.0.0; It can also be a network address similar to *.*.*.0, such as:

192.168.1.0.

Dst Address

The destination address can be either the specific IP address or the full

address 0.0.0.0; It can also be a network address similar to *.*.*.0, such as:

192.168.1.0.

Src Mask

Is the source address mask. When configured as 255.255.255.255, it

means that the host is specific. When set as 255.255.255.0, it means that a

network segment is filtered.

Dst Mask

Is the destination address mask. When configured as 255.255.255.255, it

means the specific host. When set as 255.255.255.0, it means that a

network segment is filtered.

After setting, click [Add] and a new item will be added in the firewall input rule, as shown in the figure below:

Picture 140 - Firewall Input rule table

Then select and click the button [Apply].

In this way, when the device is running: ping 192.168.1.118, the packet cannot be sent to 192.168.1.118

because the output rule is forbidden. However, the other IP of the ping 192.168.1.0 network segment can still

receive the response packet from the destination host normally.

128

Picture 141 - Delete firewall rules

Select the list you want to delete and click [Delete] to delete the selected list.

12.32 Device Log >> Device Log

You can grab the device log, and when you encounter an abnormal problem, you can send the log to the

technician to locate the problem. See 13.6 Get log information.

129

13 Trouble Shooting

When the phone is not in normal use, the user can try the following methods to restore normal operation of

the phone or collect relevant information and send a problem report to technical support mailbox.

13.1 Get Device System Information

Users can get information by pressing the [Menu] >> [Status] option in the phone.The following information

will be provided:

The network information

Equipment information (model, software and hardware version), etc.

13.2 Reboot Device

Users can reboot the device from soft-menu, [Menu] >> [Basic] >> [Reboot System], and confirm the action

by [OK]. Or, simply remove the power supply and restore it again.

13.3 Reset Device to Factory Default

Resetting Device to Factory Default will erase all the users configuration, preference, database and profiles

on the device and restore the device back to the state as factory default.

To perform a factory default reset, user should press [Menu] >> [Advanced] , and then input the password to

enter the interface. Then choose [Factory Reset] and press [Enter], and confirm the action by [OK]. The

device will be rebooted into a clean factory default state.

13.4 Screenshot

If there is a problem with the phone, the screenshot can help the technician locate the function and identify

the problem. In order to obtain screen shots, log in the phone webpage [System] >> [Tools], and you can

capture the pictures of the main screen and the secondary screen (you can capture them in the interface with

problems).

130

Picture 142 - Screenshot

13.5 Network Packets Capture

Sometimes it is helpful to dump the network packets of the device for issue identification. To get the packets

dump of the device, user needs to log in the device web portal, open page [System] >> [Tools] and click

[Start] in Network Packets Capture section. A pop-up message will be prompt to ask user to save the

capture file. User then should perform the relevant operations such as activating/deactivating line or making

phone calls and click [Stop] button in the web page when operation finished. The network packets of the

device during the period have been dumped to the saved file.

Picture 143 - Web capture

User may examine the packets with a packet analyzer or send it to support mailbox.

131

13.6 Get Log Information

Log information is helpful when encountering an exception problem. In order to get the log information of the

phone, the user can log in the phone web page, open the page [Device log], click the [Start] button, follow

the steps of the problem until the problem appears, and then click the [End] button, [Save] to local analysis or

send the log to the technician to locate the problem.

13.7 Common Trouble Cases

Table 30 - Trouble Cases

Trouble Case Solution

Device could not boot up

1. The device is powered by external power supply via power adapter or

PoE switch. Please use standard power adapter provided

by manufacturer or PoE switch met with the specification requirements

and check if device is well connected to power source.

2. If you saw POST MODE on the device screen, the device system

image has been damaged. Please contact location technical support to

help you restore the phone system.

Device could not register to a

service provider

1. Please check if device is well connected to the network. The network

Ethernet cable should be connected to the [Network] port NOT

the [PC] port. If the cable is not well connected to the network

icon [WAN disconnected] will be flashing in the middle of the

screen.

2. Please check if the device has an IP address. Check the system

information, if the IP displays Negotiating, the device does not have

an IP address. Please check if the network configurations is correct.

3. If network connection is fine, please check again your line

configurations. If all configurations are correct, please kindly contact

your service provider to get support, or follow the instructions in 13.5

Network Packet Capture to get the network packet capture of

registration process and send it to manufacturer support to

analy manufacturer ze the issue.

No Audio or Poor Audio in

Handset

1. Please check if Handset is connected to the correct Handset ( ) port

NOT Headphone ( ) port.

2. The network bandwidth and delay may be not suitable for audio call at

the moment.

Poor Audio or Low Volume in

Headphone

1. There are two Headphone wire sequence in the market. Please use the

Headphone provided by manufacturer, or consult manufacturer the wire

Manualsnet FAQs

If you want to find out how the DS-KP8000-HE1 Hikvision works, you can view and download the Hikvision DS-KP8000-HE1 Phone User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Hikvision DS-KP8000-HE1 as well as other Hikvision manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Hikvision DS-KP8000-HE1. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Hikvision DS-KP8000-HE1 Phone User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Hikvision DS-KP8000-HE1 Phone User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Hikvision DS-KP8000-HE1 Phone User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Hikvision DS-KP8000-HE1 Phone User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikvision DS-KP8000-HE1 Phone User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.