Hikvision DS-PEA22-F Panel Quick Start Guide PDF

Panic Alarm Station

Quick Start Guide

Panic Alarm Station Quick Start Guide

i

2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred to

as "Hikvision"), and it cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means,

without the prior written permission of Hikvision. Unless otherwise expressly stated herein, Hikvision does not make

any warranties, guarantees or representations, express or implied, regarding to the Manual, any information

contained herein.

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other

information hereinafter are for description and explanation only. The information contained in the Manual is subject

to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at

the Hikvision website (https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks Acknowledgement

and other Hikvisions trademarks and logos are the properties of Hikvision in various

jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners.

LEGAL DISCLAIMER

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH

ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS.

HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR

OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR

INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON

BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION

WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR

LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION

SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES

RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;

HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY

RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE

RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD

PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA

PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES,

INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY

NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

Panic Alarm Station Quick Start Guide

ii

Regulatory Information

FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help

FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the

applicable harmonized European standards listed under the EMC Directive 2014/30/EU, LVD Directive 2014/35/EU, the

RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in

the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent

new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal

waste in the European Union. See the product documentation for specific battery information. The battery is marked

with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper

recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Panic Alarm Station Quick Start Guide

iii

Applicable Models

This manual is applicable to DS-PEA series panic alarm station.

Product Model

Panic Alarm Station DS-PEA22-F(B)

Box Panic Alarm Station DS-PEA22-B(B)

Pole Panic Alarm Station DS-PEA22-P(B)

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Safety Instruction

The device should be used in compliance with local laws and electrical safety regulations. Refer to the appropriate documentation for detailed information.

The input voltage should conform to IEC60950-1 standard: SELV (Safety Extra Low Voltage) and the

Limited Power Source (100120/200240 VAC). Refer to the appropriate documentation for detailed information.

DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards caused by overload.

Make sure the plug is properly connected to the power socket.

If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center.

Do not drop the device or subject it to physical shock.

Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.

Do not aim the lens at the sun or any other bright light.

Symbol Description

Provides additional information to emphasize or supplement important points of the main text.

Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.

Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury.

Panic Alarm Station Quick Start Guide

iv

When any laser equipment is in use, make sure that the device lens is not exposed to the laser beam, or it may burn out.

Do not expose the device to high electromagnetic radiation or extremely hot, cold, dusty, or damp

environments, the appropriate temperature is -40 to 60.

Place the device in a dry and well-ventilated environment.

Keep non-waterproof devices away from liquids.

Keep the device in original or similar packaging while transporting it.

A few device components (e.g., electrolytic capacitor) require regular replacement. The average lifespan varies, so periodic checking is recommended. Contact your dealer for details.

Improper use or replacement of the battery may result in explosion hazard. Replace with the same or equivalent type only. Dispose of used batteries in conformance with the instructions provided by the battery manufacturer.

Never attempt to disassemble the device.

Panic Alarm Station Quick Start Guide

v

Table of Content Chapter 1 Overview .................................................................................................................... 1

Description ............................................................................................................................... 1

Key Features ............................................................................................................................. 1

Chapter 2 Structure Description .................................................................................................. 2

Mainboard Description ............................................................................................................ 2

Appearance Description ........................................................................................................... 2

2.2.1 Panic Alarm Station ......................................................................................................... 2

2.2.2 Box Panic Alarm Station .................................................................................................. 3

2.2.3 Pole Panic Alarm Station ................................................................................................. 4

Installation and Connections .................................................................................................... 4

2.3.1 Power Supply Wiring ....................................................................................................... 4

2.3.2 Network Wiring ............................................................................................................... 5

2.3.3 Audible and Visual Alarm Wiring .................................................................................... 5

2.3.4 Alarm Input Wiring (Normally Open) .............................................................................. 6

2.3.5 Pole Panic Alarm Station Installation .............................................................................. 6

Chapter 3 Activating the Control Panel ..................................................................................... 11

Activate via SADP ................................................................................................................... 11

Activate Device via Client Software ....................................................................................... 12

Appendix A User Manual .......................................................................................................... 13

Panic Alarm Station Quick Start Guide

1

Chapter 1 Overview

Description

DS-PEA series of active panic alarm station supports multiple networks. It provides live view, two-way audio, and customized audio input. It supports linkage with the surrounding cameras and external lamp, sound box, etc. It helps to realize alarm aid in emergency.

Key Features

Network adaptive and video and audio adaptive Audio and video file storage H.264/H.265, G.711U, G726, AAC, OPUS Video collection and all-day monitoring with 2MP HD IR camera Built-in omnidirectional microphone to realize two-way audio Multiple network protocols including TCP/IP, RTSP and SADP Supports Standard SIP, Ehome, and Ezviz Waterproof, anti-electromagnetic interference, tamper-proof and explosion-proof (Panic

Alarm Station doesnt support waterproof)

Panic Alarm Station Quick Start Guide

2

Chapter 2 Structure Description

Mainboard Description

Mainboard of panic alarm station

Appearance Description

Panic Alarm Station Quick Start Guide

3

One-touch Panic Alarm Station

Panel Description

No. Description

1 Loudspeaker

2 IR Light

3 Camera

4 Light Sensor

5 Panic Alarm Button

6 Microphone

Case Panic Alarm Station

Panel Description

No. Description

1 Audible Alarm Lamp

2 Loudspeaker

3 IR Light

4 Camera

5 Light Sensor

6 Panic Alarm Button

7 Microphone

Panic Alarm Station Quick Start Guide

4

1

2

3

4

5

6

7

Pole Panic Alarm Station

Panel Description

No. Description

1 Audible Alarm Lamp

2 Microphone

3 IR Light

4 Camera

5 Light Sensor

6 Loudspeaker

7 Panic Alarm Button

Installation and Connections

The product is suitable for mounting on concrete or other non-combustible surface only.

For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and should be easily accessible.

For PERMANENTLY CONNECTED EQUIPMENT, a readily accessible disconnect device (2.5A) shall be incorporated external to the equipment.

Panic Alarm Station Quick Start Guide

5

Power Supply Wiring

Network Wiring

Panic Alarm Station Quick Start Guide

6

Audible and Visual Alarm Wiring

Alarm Input Wiring (Normally Open)

Panic Alarm Station Quick Start Guide

7

Pole Panic Alarm Station (without Speed Dome Bracket) Dimension

2 2

0 5

.2 m

m

Front View Side View Top View

260 mm 450 mm

Lock

Panic Alarm Station Quick Start Guide

8

Pole Panic Alarm Station (with Speed Dome Bracket)Dimension

260 mm 450 mm

4 5

0 4

.7 m

m

Front View Side View Top View

Lock

Panic Alarm Station Quick Start Guide

9

Pole Panic Alarm Station Grounding Cage Dimension(without Speed Dome

Bracket)

8 0

0 m

m

1 0

3 0

m m

8 0

m m

4 M20

C25 Concrete

Conduit Diameter 30mm

Reinforced Rebar

Foundation Bolt

Rubble

370mm 20mm

Basement

Weld 8Rebar with Foundation Bolt

8 0

0 m

m

1 0

0 3

0 0

m m

Basement

420mm 8

0 m

m

700 mm 150 mm150 mm

Route the conduit through the square area Conduit Diameter 30mm

Basement Dimension

160 mm

450 mm 370 mm

5 0

0 m

m 4

2 0

m m

1 0

4 1

6 0

m m

Panic Alarm Station Quick Start Guide

10

Pole Panic Alarm Station Grounding Cage Dimension (with Speed Dome Bracket)

4-M20

1 3

8 0

m m

1 2

0 0

m m

8 0

m m

150 mm

370 mm M20

450 mm 370 mm

160 mm

5 0

0 m

m 4

2 0

m m

1 6

0 m

m 1

0 4

1 2

0 0

m m

3 0

0 m

m 3

0 0

m m

1 0

0

150 mm

420 mm

8 0

m m

700 mm

C25 Concrete

Conduit Diameter 30mm

Reinforced Rebar

Foundation Bolt

Rubble

Weld 8Rebar with Foundation Bolt

Basement Basement

Route the conduit through the square area Conduit Diameter 30mm

Basement Dimension

UD08759B-B

Panic Alarm Station Quick Start Guide

11

Chapter 3 Activating the Control Panel

In order to protect personal security and privacy and improve the network security level, you should activate the device the first time you connect the device to a network.

Activate via SADP

SADP is a tool to detect, activate and modify the IP address of the device over the LAN.

Before You Start

Get the SADP software from the supplied disk or the official website http://www.hikvision.com/en/, and install the SADP according to the prompts.

The device and the PC that runs the SADP tool should be within the same subnet.

The following steps show how to activate a device and modify its IP address. For batch activation and IP addresses modification, refer to User Manual of SADP for details.

Steps

1. Run the SADP software and search the online devices. 2. Find and select your device in online device list. 3. Input new password (admin password) and confirm the password.

Caution

STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

4. Click Activate to start activation.

Figure 3-1 Activate via SADP

Panic Alarm Station Quick Start Guide

12

Status of the device becomes Active after successful activation. 5. Modify IP address of the device.

1) Select the device. 2) Change the device IP address to the same subnet as your computer by either modifying the IP

address manually or checking Enable DHCP. 3) Input the admin password and click Modify to activate your IP address modification.

Activate Device via Client Software

Before You Start

Get the iVMS-4200 client software from the supplied disk or the official website http://www.hikvision.com/en/. Install the software by following the prompts.

Get the Guarding Vision client software from the supplied disk. Install the software by following the prompts.

The device and the PC that runs the software should be in the same subnet.

Steps

1. Run the client software. 2. Enter Device Management Device in the Maintenance and Management list. 3. Click Online Device. 4. Check the device status from the online device list, and select an inactive device. 5. Click Activate. 6. Create and confirm the admin password of the device.

Caution

STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.

7. Click OK to start activation. Device status will change to Active after successful activation.

8. Edit IP address of the device. 1) Select a device and click on the online device list. 2) Change the device IP address to the same subnet with your computer. 3) Enter the admin password of the device and click OK to complete modification.

9. Optional: Check the device on the online device list and click Add to add the device to the