Contents

Hikvision DS-D5027UC Monitor User's Manual PDF

1 of 24
1 of 24

Summary of Content for Hikvision DS-D5027UC Monitor User's Manual PDF

LCD Monitor User Manual

Legal Information

2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website ( https:// www.hikvision.com/ ). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks

and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners.

: The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

LCD Monitor User Manual

i

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.

LCD Monitor User Manual

ii

Regulatory Information

FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected. Consult the dealer or an experienced radio/TV technician for help.

FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause

undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European

LCD Monitor User Manual

iii

standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: http://www.recyclethis.info .

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: http://www.recyclethis.info .

Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

LCD Monitor User Manual

iv

Preface

Applicable Models This manual is applicable to 4K monitors of the following sizes: 43 inches, and 55 inches, 65 inches, and 75 inches.

Symbol Conventions The symbols that may be found in this document are defined as follows.

Symbol Description

Danger Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury.

Caution Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.

Note Provides additional information to emphasize or supplement important points of the main text.

Safety Instruction

Caution Proper configuration of all passwords and other security settings is the responsibility of the

installer and/or end-user. In the use of the product, you must be in strict compliance with the electrical safety regulations

of the nation and region. Please refer to technical specifications for detailed information. Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power

Source with 100~240 VAC according to the IEC60950-1 standard. Please refer to technical specifications for detailed information.

Do not connect several devices to one power adapter as adapter overload may cause over- heating or a fire hazard.

Please make sure that the plug is firmly connected to the power socket. If smoke, odor or noise rise from the device, turn off the power at once and unplug the power

cable, and then please contact the service center.

LCD Monitor User Manual

v

Warning The equipment must be connected to an earthed mains socket-outlet. CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Improper replacement of the battery with an incorrect type may defeat a safeguard (for

example, in the case of some lithium battery types). Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery,

which may result in an explosion. Do not leave the battery in an extremely high temperature surrounding environment, which may

result in an explosion or the leakage of flammable liquid or gas. Do not subject the battery to extremely low air pressure, which may result in an explosion or the

leakage of flammable liquid or gas. Dispose of used batteries according to the instructions. Never place the equipment in an unstable location. The equipment may fall, causing serious

personal injury or death. NEVER place items that might tempt children to climb, such as toys and remote controls, on the

top of the equipment or furniture on which the equipment is placed.

LCD Monitor User Manual

vi

Contents Chapter 1 Introduction ............................................................................................................... 1

1.1 Overview ................................................................................................................................ 1

1.2 Key Features ........................................................................................................................... 1

1.3 Panel Buttons ......................................................................................................................... 1

1.4 Rear Panel Interface ............................................................................................................... 2

1.5 Remote Control ...................................................................................................................... 3

1.5.1 Remote Control Panel ................................................................................................... 3

1.5.2 Remote Control Operation ............................................................................................ 5

Chapter 2 Terminal Operations ................................................................................................... 6

2.1 Switch Signal Source .............................................................................................................. 6

2.2 Configure Image Parameters .................................................................................................. 6

2.3 Configure Audio Settings ........................................................................................................ 9

2.4 Configure Screen ID ............................................................................................................. 10

2.4.1 Manually Configure Screen ID ..................................................................................... 10

2.4.2 Automatically Configure Screen ID ............................................................................. 10

2.5 Configure Overheat Alarm ................................................................................................... 11

2.6 Menu Interface Settings ....................................................................................................... 12

2.7 Power Settings ..................................................................................................................... 12

2.8 System Maintenance ............................................................................................................ 13

Chapter 3 Client Operations ...................................................................................................... 14

3.1 Log into the Client ................................................................................................................ 14

3.2 Configure Serial Port ............................................................................................................ 14

3.3 Startup/Shutdown ............................................................................................................... 14

3.4 Switch Input Source ............................................................................................................. 15

LCD Monitor User Manual

vii

Chapter 1 Introduction

1.1 Overview The LCD monitor adopts Mstar ACE-5 auto-coloring and image-enhancing engine to improve image contrast, detail, edge, etc. It is an ideal choice for financial institution, metro, train station, airport and exhibition.

1.2 Key Features Up to 3840 2160 resolution. Adopts 3D digital comb filter and 3D noise reduction technology. Programmable 12-bit RGB gamma correction. Complete factory settings. Software spread spectrum technology reduces EMI radiation. Fan-less design saves energy and reduces noise. Supports one-touch quiescence, and high temperature alarm. Software update via USB interface. 3.5 mm audio input. Supports 7 24 hours working mode. Adopts 2 MACE color correction engines to improve image contrast, detail, edge, etc. Provides multiple video and audio input interfaces, including DP, DVI, HDMI and VGA.

1.3 Panel Buttons Panel buttons are for illustration only. See details in the following figure and table.

Note Panel buttons are enabled by default, you can enter Menu Other Setting Keypad to disable panel buttons.

Figure 1-1 Panel Buttons

LCD Monitor User Manual

1

Table 1-1 Buttons Description

Button Description

SOURCE Enter Input Source page.

MENU Enter Menu page.

/// Move the cursor up/down/left/right.

POWER Press to confirm, or turn on the device. Hold for more than 2 seconds to switch the device to standby mode.

1.4 Rear Panel Interface Please view the corresponding rear panel of your monitor.

Figure 1-2 Rear Panel of Device 1 (DS-D5043UL-A)

Figure 1-3 Rear Panel of Device 2 (DS-D5055UL-A)

Figure 1-4 Rear Panel of Device 3 (DS-D5065UL-A)

Figure 1-5 Rear Panel of Device 4 (DS-D5055UL-C)

LCD Monitor User Manual

2

Table 1-2 Description of Rear Panel

Interface Description

SWITCH Power switch.

100-240V~ 100 to 240 VAC power supply.

POWER Working status indicator. Turns red when the device is standby. Turns green when the device is working.

HDMI HDMI digital signal input.

DP DP digital signal input

DVI DVI digital signal input.

VGA VGA analog signal input.

USB USB interface.

RS232 IN RS-232 serial port input.

RS232 OUT RS-232 serial port output.

AUDIO IN 3.5 mm audio input.

AUDIO OUT 3.5 mm audio output.

IR IN Infrared input.

1.5 Remote Control

1.5.1 Remote Control Panel

Refer to the following table for the remote control panel description.

LCD Monitor User Manual

3

Table 1-3 Description of Remote Control Buttons

Appearance Key Function

POWER Power switch.

TEST Enter the aging test.

MUTE Turn off/on the sound.

0-9 Enter numbers to select the desired screen, or enter the special menu such as factory menu, etc.

FREEZE Freeze the image.

PIC Image mode shortcut.

INFO View system information.

LIGHT Lighting mode.

/// Up/down/left/right direction keys, select a submenu or set menu parameters.

OK Confirm

+VOL- Adjust volume

MENU Enter/Exit main menu.

SOURCE Enter Input Source page.

Note Buttons of PLAY, STOP, PREV/NEXT, STOP, LIST, REPEAT, L/R, RETURN and +CH- are reserved for use.

LCD Monitor User Manual

4

1.5.2 Remote Control Operation

If the monitor has an IR receiver at the corner, you shall aim the remote control at the IR receiver. Otherwise, you shall aim the remote control at screen center. You should operate the remote control within an angle of 45 when aiming at the IR receiver or screen center. Otherwise, the screen may not respond. In order to achieve better performance, it is recommended to keep the distance between remote control and monitor within 5 meters.

Figure 1-6 Operation of Remote Control

LCD Monitor User Manual

5

Chapter 2 Terminal Operations

2.1 Switch Signal Source The monitor can display input signal sources including HDMI, DVI, VGA and DP.

Steps 1. Press SOURCE to enter Input Source page.

Figure 2-1 Input Source 2. Press or to select the input source. 3. Press OK to accomplish the input source selection.

2.2 Configure Image Parameters

Picture Mode You can switch picture modes and adjust image parameters including contrast, brightness, color, sharpness, and hue. Enter Menu Picture Mode Picture Mode , and select the mode as your desire.

LCD Monitor User Manual

6

Figure 2-2 Picture Mode

Standard Suitable for a normal environment.

Soft Suitable for a dark room.

Dynamic Suitable for a bright room.

User Set the brightness, contrast, color, or sharpness to adjust display effect.

LCD Monitor User Manual

7

Note Adjustable parameters vary depending on the input source you choose. If the parameter bar is blue, it indicates that the parameter is unadjustable under the current input source.

VGA Setting When you select VGA as the input source, you can adjust VGA parameters to make the picture show in the correct position. Enter Menu VGA Setting to set the parameters as your desire.

Figure 2-3 VGA Parameter

Overscan Setting When there is black border, you can shield the borders for better image quality. Enter Menu Overscan Setting Overscan to turn it on. You can set Left Edge, Right Edge, Top Edge and Bottom Edge from 0 to 100.

Figure 2-4 Overscan Setting

LCD Monitor User Manual

8

Note The value of overscan is the pixel value of certain edge.

Aspect Enter Menu Display Setting . You can set Aspect as 16: 9, 4:3, or 1: 1 to adjust the display ratio.

Figure 2-5 Aspect

Light Mode You can adjust Light Mode to adapt different lighting conditions. Enter Menu Display Setting . Normal

Suitable for the normal light condition. Night

Suitable for the night condition. The No. represents the intensity of the brightness. 1 means weak, 2 means medium, and 3 means strong.

Sun Suitable for the daylight condition. The No. represents the intensity of the brightness. 1 means weak, 2 means medium, and 3 means strong.

Image Freeze Image freeze refers to freeze the current image on screen. Enter Menu Other Settings , and then press or to set Image Freeze as Yes.

Note After switching the input source, the image freeze is automatically disabled by default.

No Signal When the monitor dose not have signal input for a long time, it will enter No Signal mode. Enter Menu Other Settings , and then press or to set No Signal as Blue, Black, or LOGO.

2.3 Configure Audio Settings You can switch the mute on/off, and adjust the volume/balance.

LCD Monitor User Manual

9

Enter Menu Audio Setting , and then press or to set the mute, volume, and balance.

Figure 2-6 Audio Settings

2.4 Configure Screen ID When you have a number of monitors, setting screen ID to monitors would help you to identify each monitor.

2.4.1 Manually Configure Screen ID

Steps 1. Enter Menu ID Setting . 2. Select Configuration Mode as Manual.

Figure 2-7 Configure Screen ID (Manual) 3. Set Rows and Columns as you required. 4. Press OK.

Example If you set Rows as 2, and Columns as 3, the screen ID would be 0203.

2.4.2 Automatically Configure Screen ID

Steps 1. Enter Menu ID Setting . 2. Set Configuration Mode as Auto.

LCD Monitor User Manual

10

Figure 2-8 Configure Screen ID (Auto) 3. Set Total Rows and Total Columns. The screen ID will be allocated as the order below.

Figure 2-9 Screen ID Order 4. Select Auto Config. 5. Press OK.

2.5 Configure Overheat Alarm When the board temperature exceeds or equals its set value, it will trigger an overheat alarm.

Steps 1. Enter Menu Alarm Setting .

Figure 2-10 Overheat Alarm 2. Enable Overheat Alarm. 3. Set Alarm Temp ( C) as your desire. 4. Press OK.

LCD Monitor User Manual

11

2.6 Menu Interface Settings You can set language, OSD duration, and OSD blending.

Enter Menu OSD Setting .

Figure 2-11 Menu Interface Settings

Language Chinese and English are available.

OSD Duration The OSD display time when you stopping operating the monitor.

OSD Blending The OSD transparency.

2.7 Power Settings You can set Auto Sleep, Low Energy and No Signal to make power plan.

Enter Menu Other Setting .

Figure 2-12 Power Settings

LCD Monitor User Manual

12

Auto Sleep When the monitor does not have signal input in a preset time, it will automatically go to sleep.

Low Energy It reduces screen brightness and power consumption to save power.

Energy Diagram Energy diagram displays power information on the top left of the screen. Real-time Power

The current power consumption of the device. Power Percentage

The ratio of Real-time Power divided by the total power. Accumulated Power

It sums all the power Low Energy mode has saved.

2.8 System Maintenance You can view system information, upgrade system, restore default settings, etc.

View System Information Enter Menu System Info to view software version, working time, device ID, and current temperature..

Upgrade System Enter Menu Other Setting . Press Upgrade (USB) to upgrade system via USB interface.

Restore Default Settings Enter Menu Other Setting . Press Restore Default to restore all parameters to default settings.

LCD Monitor User Manual

13

Chapter 3 Client Operations

You can turn on/off the monitor, switch input signal through the ScreenControl client.

3.1 Log into the Client Before You Start Obtain the ScreenControl software from CD-ROM, and install it.

Steps 1. Double-click the client software shortcut to open it. 2. Select Control Mode as serial port. 3. Select Screen Type as LCD-D50/4K. 4. Select User Name as guest. 5. Click Login to log into the client software.

3.2 Configure Serial Port The client controls the screen by connecting the serial port.

Steps 1. Click System Configuration Serial Port Configuration . 2. Set Serial Port according to the actual circumstance. 3. Select Buad Rate as 9600. 4. Click Open to connect the serial port. 5. Optional: Click Close to disconnect the serial port.

3.3 Startup/Shutdown You can turn on/off the monitors via the client.

Before You Start Configure the serial port, and see Configure Serial Port for details.

Steps 1. Open the Screen Control page. 2. Hold the mouse to draw a rectangle to select one or multiple virtual screens. 3. Turn on/off the monitors. - Right click to select Startup/Shutdown. - Click to turn off the monitors. Or click to turn on the monitors.

LCD Monitor User Manual

14

3.4 Switch Input Source You can switch the input source via the client.

Before You Start Configure the serial port, and see Configure Serial Port for details.

Steps 1. Open the Screen Control page. 2. Hold the mouse to draw a rectangle to select one or multiple virtual screens. 3. Right

Manualsnet FAQs

If you want to find out how the DS-D5027UC Hikvision works, you can view and download the Hikvision DS-D5027UC Monitor User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Hikvision DS-D5027UC as well as other Hikvision manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Hikvision DS-D5027UC. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Hikvision DS-D5027UC Monitor User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Hikvision DS-D5027UC Monitor User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Hikvision DS-D5027UC Monitor User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Hikvision DS-D5027UC Monitor User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikvision DS-D5027UC Monitor User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.