Contents

Hikvision DS-D5024FC-C Monitor User's Manual PDF

Download download
Hikvision DS-D5024FC-C Monitor User's Manual PDF
Hikvision Monitor DS-D5024FC-C User's Manual
Pages 20
Year 0
Language(s)
English en
1 of 20
1 of 20

Summary of Content for Hikvision DS-D5024FC-C Monitor User's Manual PDF

Page 1

0

Monitor

User Manual

Page 2

Monitor User Manual

i

Applicable Models

This manual is applicable to monitor.

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol Description

Provides additional information to emphasize or supplement important points of the main text.

Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.

Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury.

Page 3

Monitor User Manual

ii

TABLE OF CONTENTS Chapter 1 Introduction ............................................................................................................... 1

Key Features ............................................................................................................................. 1

Packing List ............................................................................................................................... 1

Power On .................................................................................................................................. 1

Chapter 2 Rear Panel Interface ................................................................................................... 3

Chapter 3 Panel Buttons ............................................................................................................. 5

Chapter 4 Remote Control .......................................................................................................... 6

Chapter 5 Basic Operation .......................................................................................................... 7

Switch the Signal Source .......................................................................................................... 7

Menu Operation ....................................................................................................................... 7

Image Settings .......................................................................................................................... 8

5.3.1 Image Mode .................................................................................................................... 8

5.3.2 Backlight .......................................................................................................................... 9

5.3.3 VGA Parameter ................................................................................................................ 9

Display Settings ...................................................................................................................... 10

5.4.1 Oversccan ...................................................................................................................... 11

5.4.2 Aspect ............................................................................................................................ 11

5.4.3 Keypad ........................................................................................................................... 11

5.4.4 Eye Protection ............................................................................................................... 12

System Maintenance and Info................................................................................................ 12

5.5.1 Maintenance ................................................................................................................. 12

5.5.2 System Info .................................................................................................................... 13

System Settings ...................................................................................................................... 13

5.6.1 OSD Settings .................................................................................................................. 13

5.6.2 Audio Mode ................................................................................................................... 14

5.6.3 Other Settings ............................................................................................................... 15

5.6.4 Color Settings ................................................................................................................ 15

USB Menu ............................................................................................................................... 16

Page 4

Monitor User Manual

1

Chapter 1 Introduction

Key Features

8-bit/10-bit dual channel LVDS (19201080) HD display.

3D digital comb filter and 3D noise reduction technology.

Hi-Fi color OSD and user-friendly menu for operation.

Mstar ACE-5 auto color and image enhancement engine, improving the image contrast, details, edges, etc.

Programmable 12-bit RGB gamma correction.

Complete factory setting mode.

1 HDMI 1.4b input interface, and HDCP 1.4 available.

Software spread spectrum technology reduces EMI radiation.

HD JPEG decoding.

Professional and standard CVBS input interface with one channel input available.

Multimedia playing of text, image, audio, video, etc.

The specific features may vary with models. Refer to Rear Panel Interface for details.

Packing List

Packing List

Name Quantity Name Quantity

Monitor 1 Power cable 1

Remote control (Optional) 1 Base set 1

Battery (Optional) 2 User manual 1

HDMI cable (Optional) 1 Quick start guide 1

Power On

Page 5

Monitor User Manual

2

Connect the device to an earthed mains socket-outlet, and press the power button.

Power supply: 220 VAC~, 50/60 Hz.

Power off the device and disconnect the plug if it is not in use for a long time.

The device cannot be connected to DC power supply.

Page 6

Monitor User Manual

3

Chapter 2 Rear Panel Interface

The panel appearances and interfaces vary with different models. The devices can be classified as follows.

Type A

Interface of Type A

Type B

Interface of Type B

Type C

Interface of Type C

Type D

Interface of Type D

Interface Description

Interface Description Interface Description

VGA VGA analog signal input interface

POWER Power supply

Page 7

Monitor User Manual

4

Interface Description Interface Description

HDMI HDMI digital signal input interface

USB USB 2.0 input interface

AUDIO Audio input interface CVBS CVBS signal input interface

USB and CVBS input interfaces are available to type A and D, and audio input interface to type A, C, and D.

Page 8

Monitor User Manual

5

Chapter 3 Panel Buttons

The buttons at the bottom-right corner of the front panel are shown as follows.

Panel Buttons

Button Description

Button Description

Power On/Off

Second-level menu page: Exit menu.

File selection for USB playing: play

Other pages: Display main menu page.

Display the current input source.

All the menu pages: OK

First-level page: previous/next

Second-level page: add/reduce

USB playing page: volume up/down

Display all the input sources.

All the menu pages: Switch to next one.

Page 9

Monitor User Manual

6

Chapter 4 Remote Control

Remote Control Description

Appearance Button Description

Power on/off

Mute/Unmute

FREEZE Freeze the current display.

MENU Go to menu settings.

SOURCE Check or select a signal source.

Up/Down/Left/Right

OK OK

Play/Pause

Stop

Previous/Next

Repeat

Return

The remote control is not available to all kinds of devices. Whether your device is equipped with a remote control depends on the actual situation.

Page 10

Manual Name Manual Type

7

Chapter 5 Basic Operation

The interfaces vary with different models. The figures followed are for illustration purpose only.

Switch the Signal Source

Connect the device to power source and signal source, and power the device on.

Press to enter the signal source page.

Signal Source

Press to switch input sources, and press to confirm.

Menu Operation

Basic Operation

Operation Description

Enter main menu page Press .

Check first-level menu On the main menu page, press to switch.

Check parameters On the first-level menu page, press to enter and check

different parameters.

Configure parameters Press or to adjust the value of the selected parameter, and press to confirm.

Press to switch to other parameters.

Return to the upper menu Press on any pages.

Page 11

Monitor User Manual

8

Image Settings

You can switch image modes and adjust image parameters including contrast, brightness, color, sharpness, and hue. The adjustable parameters will change when you switch from one image mode to another.

Image Mode

Image Parameters

Parameter Description

Image Mode Standard: Suitable for a normal environment. It is set as the default picture mode.

Gentle: Suitable for a dark room.

Dynamic: Suitable for a bright room.

User: Set the brightness, contrast, color, sharpness or hue to adjust display effect.

Brightness Ranges from 0 to 100. The higher the value is, the brighter the display will be.

Contrast Ranges from 0 to 100. The higher the value is, the clearer the image will be

Color Ranges from 0 to 100. The higher the value is, the more colorful the image will be.

Sharpness Ranges from 0 to 100. Rise the value up to make the image more vivid.

Hue Ranges from 0 to 100. It determines the contrast degree between the bright and dark.

Page 12

Monitor User Manual

9

If the user mode selected, the adjustable parameters are determined by the input signal.

For VGA input, brightness and contrast are adjustable.

For HDMI input, brightness, contrast, color, and sharpness are adjustable.

For CVBS input, brightness, contrast, color, sharpness, and hue are adjustable.

For USB (not supported by Type B and C), brightness, contrast, color, and sharpness

are adjustable.

Parameters in white bar are adjustable. If the parameter bar is gray, it indicates that the

parameter is not adjustable under the current mode or input source.

The backlight value ranges from 0 to 100.

Audio Mode

When you select VGA as the input source, you can adjust VGA parameters to make the picture show in the correct position.

Page 13

Monitor User Manual

10

VGA Settings

VGA Parameters

Parameter Description

Adjust Adjust. Press or to enable or disable.

Row Ranges from 0 to 100.

Column Ranges from 0 to 100.

Clock Ranges from 0 to 100.

Phase Ranges from 0 to 100.

Auto Lock Off/On

Adjusting the value of H-Position and V-Position will change the image position in a large

extent, while Phase and Clock in a slight extent.

Change the value of Clock will stretch or narrow the image.

If Auto Lock is enabled, the related parameters will self-adjust under the following 3

circumstances: The device is restarted, a VGA input source is accessed, and the input

source is switched to VGA.

VGA parameters cannot be changed when Auto Lock is disabled.

Display Settings

Page 14

Monitor User Manual

11

If Overscan is enabled, you can set the value of the top/bottom/left/right edge. The value indicates

the covered units of different directions.

Overscan

Overscan Parameters

Parameter Description

Overscan Off/On

Left Edge Ranges from 0 to 100.

Right Edge Ranges from 0 to 100.

Top Edge Ranges from 0 to 100.

Bottom Edge Ranges from 0 to 100.

Scale up/down the image. Three kinds of aspects are available: 16:9, 4:3, and point to point.

Point to Point mode is only available when a VGA or HDMI signal is accessed.

When no need to use keypad or the installation environment may extrude the keypad, you can set

the Keypad as Off to lock it.

Page 15

Monitor User Manual

12

Keypad

Disabled by default. If enabled, the screen switches to eye protection mode.

Eye Protection is only available to type D.

System Maintenance and Info

Contact our technical support personnel for upgrade program and USB driver.

Upgrade: Insert the USB driver to the USB interface, and set Upgrade (USB) as On. Follow the instructions on the screen to upgrade.

Restore Defaults: Restore all the settings to the default value.

Page 16

Monitor User Manual

13

System Maintenance

Check the version, working time, ID, and serial number of the device.

System Information

System Settings

Page 17

Monitor User Manual

14

OSD Settings

OSD Parameters

Parameter Description

Language English/

OSD Duration Always On/5 s/15 s/30 s. The displaying time

for OSD menu when no operation is done.

OSD Blending Low/Medium/High/Off

You can set the volume as desired or mute/unmute the playing.

Page 18

Monitor User Manual

15

Audio Mode

Audio Mode Parameters

Parameter Description

Mute Off/On. Off by default.

Volume Ranges from 0 to 100.

Balance Ranges from 0 to 100.

Audio mode is only available to type A and D.

Screen Saver

Screen Saver Parameters

Parameter Description

No Signal Black/Blue. The screen color to be displayed when

no signal is detected.

Image Freeze Yes/No.

Page 19

Monitor User Manual

16

Image Freeze

Image Freeze Parameters

Parameter Description

Color Space 0-255/16-235

Image Freeze changes to No when you switch the signal source or restart the device.

USB Menu

USB menu is only available to type A and D.

Press , and insert your removable storage device into the USB interface of the device. </

Manualsnet FAQs

If you want to find out how the DS-D5024FC-C Hikvision works, you can view and download the Hikvision DS-D5024FC-C Monitor User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Hikvision DS-D5024FC-C as well as other Hikvision manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Hikvision DS-D5024FC-C. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Hikvision DS-D5024FC-C Monitor User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Hikvision DS-D5024FC-C Monitor User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Hikvision DS-D5024FC-C Monitor User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Hikvision DS-D5024FC-C Monitor User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikvision DS-D5024FC-C Monitor User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.