Hikvision DS-D5019QE-B Monitor User's Manual PDF

19-inch LCD Display Unit

User Manual

M6MM0M1806W001

Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact us. This manual is applicable to DS-D5019 Series monitors.

This manual may contain several technically incorrect places or printing errors, and the content is subject to

change without notice. The updates will be added into the new version of this manual. We will readily

improve or update the products or described in the manual.

1

II

Regulatory Information

2002/96/EC (WEEE directive): Products marked with this

symbol cannot be disposed of as unsorted municipal waste in the

European Union. For proper recycling, return this product to

your local supplier upon the purchase of equivalent new

equipment, or dispose of it at designated collection points. For

more information see: www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery

that cannot be disposed of as unsorted municipal waste in the

European Union. See the product documentation for specific

battery information. The battery is marked with this symbol, which may

include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For

proper recycling, return the battery to your supplier or to a designated

collection point. For more information see: www.recyclethis.info.

III

Hikvision 19-inch LCD Display Unit Users Manual

This manual, as well as the software described in it, is furnished under license and may be

used or copied only in accordance with the terms of such license. The content of this

manual is furnished for informational use only, is subject to change without notice, and

should not be construed as a commitment by Hikvision Digital Technology Co., Ltd.

(Hikvision). Hikvision assumes no responsibility or liability for any errors or inaccuracies

that may appear in the book.

Except as permitted by such license, no part of this publication may be reproduced, stored

in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical,

recording, or otherwise, without the prior written permission of Hikvision.

HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT

LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, REGARDING THE HIKVISION SOFTWARE. HIKVISION DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE

RESULTS OF THE USE OF THE HIKVISION SOFTWARE IN TERMS OF ITS CORRECTNESS,

ACCURACY, RELIABILITY, CURRENTNESS, OR OTHERWISE. THE ENTIRE RISK AS TO THE

RESULTS AND PERFORMANCE OF THE HIKVISION SOFTWARE IS ASSUMED BY YOU. THE

EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES. THE ABOVE

EXCLUSION MAY NOT APPLY TO YOU.

IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES

(INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS

OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO

USE THE HIKVISION SOFTWARE EVEN IF HIKVISION HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION

OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE

LIMITATIONS MAY NOT APPLY TO YOU.

1

Chapter1. Introduction

1.1 Key Features

Support 1366768 HD display; User-friendly operation menu;

Three image modes to adapt different environment;

1 channel HDMI 1.3 input interface;

Support software spread-spectrum technology to reduce EMI radiation; Standby Power Consumption is lower than 0.5W. Viewing Angle:Horizontal 90, Vertical 65.

1.2 Power Supply Connection

Insert the 3-pin power device into well-grounded socket and turn the rocker switch on.

Figure 1.1 Power Input

Power input specification from 100VAC to 240VAC or provide automatic switching between

high line and low line input ranges.

Turn off the main power switch of the display unit, and pull the plug from the power outlet if the display unit will not be used for a long time.

Never connect the device to a DC power.

2

Chapter2. Device Interfaces

Figure 2.1 Rear Panel of Device

Interfaces Description

POWER IN Power Input

HDMI IN HDMI Digital Signal Input

VGA IN VGA Analog Signal Input

3

Chapter3. Panel Keys

Keys on lower right corner of the display unit panel are shown in the Figure 3.1 Keys on the Display

Unit.

Figure 3.1 Keys on the Display Unit

The functions of the keys on lower right corner of the display unit vary according to different situations.

The functions are shown in the flow chart below:

4

Chapter4. Basic Operation

4.1 Contrast

Turn on the display unit when the power supply is on

and input source is confirmed.

Press key of the remote controller to enter the menu

as shown on the right. press or to adjust the value

of contrast. Press MENU to accomplish the contrast adjustment.

Figure 4.1 Input Source

4.2 Brightness

Turn on the display unit when the power supply is on and input source is confirmed.

Press key of the remote controller to enter the menu

as shown on the right. press or to adjust the value

of brightness. Press MENU to accomplish the

brightness adjustment.

Figure 4.2 Input Source

4.3 Auto Adjust

Turn on the display unit when the power supply is on and input source is confirmed.

Press AUTO key of the remote controller to enter the

menu as shown on the right(In VGA Signal).

Figure 4.3 Input Source

5

4.4 Main Menu

4.4.1 Image Settings

Purpose:

You can adjust the picture parameters by switching image modes and adjust the values of contrast,

brightness, color temperature, auto adjust, color adjust.

Steps:

1. Press Menu key to enter the main menu interface as shown below.

2. Press MENU key to enter the setting you want.

3. Press or to adjust the value. It applies for adjusting contrast, brightness, color temp and other

parameters.

Contrast, Brightness: Press or to set the contrast, the range varies from 0-100.

Color temperature : Press or to set the color temperature you need.

Gray indicates that under current mode or current input source condition it is not adjustable; Yellow

indicates that it is adjustable.

4.Press AUTO key to return to the main menu after accomplishing the adjustment.

Figure 4.4.1 Image Settings

6

4.4.2 Image Adjustment

Purpose:

When the input source is selected VGA, you can adjust the VGA parameters. It is for adjusting

VGA H position, V Position, clock and phase.

Steps:

1. Press Menu key to enter the main menu interface.

2. Press key to enter the VGA parameter setting interface. (You can select Auto Adjust and press

or to adjust the VGA parameters automatically or adjust it manually)

3. Select H Position and press or to adjust the H Position

4. Select V Position and press or to adjust the V position.

5. Select Clock and press or to adjust the clock.

6. Select Phase and press or to adjust the phase.

The range of the adjustment varies between 0-100.

7. Press Menu key to return to the main menu after accomplishing the adjustment.

Figure 4.4.2 Image Adjustment

7

4.4.3 OSD Setting

Purpose:

You can set the language, blending and OSD duration of the menu.

Steps:

1. Press MENU key to enter the main menu interface.

2. Press key twice and press MENU key to enter the Language interface, press or to switch

the language you want.

3. Select OSD H.Pos/OSD V.Pos to adjust the position of OSD with or .

4. Select OSD Timer to adjust the OSD duration with or : 5Sec~60Sec.

5. Select Transparency to adjust the OSD transparency value with or .

6. Press AUTO key to return to the main menu after accomplishing the adjustment.

Figure 4.4.3 OSD Setting

8

4.4.4 Other Settings

Purpose:

You can set Mode, Signal Source, Aspect Ratio, DCR.

Steps:

1. Press MENU key to enter the main menu interface.

2. Press triple key and press MENU key to enter the Mode interface, press or to switch the mode

between PC/GAME/MOVIE.

3. Press or to change the Signal Source between VGA and HDMI.

4. Press or to switch the Aspect Ratio between 16:9/AUTO/4:3.

5. Press or to switch the DCR On/Off.

6. Press Menu key to return to the main menu after accomplishing the adjustment.

Figure4.4.4 Other Settings

9

4.4.5 Reset Setting

Purpose:

You can reset settings to the factory defaults.

Steps:

1.Press MENU key to enter the main menu interface.

2.Press key 4 times and press MENU key to reset settings to the factory defaults.

Figure 4.4.5 Reset Setting

10

Appendix: Specifications Device Model DS-D5019 Series

Display Type TFT-LED Backlight

Screen Size 18.5"

Dot Pitch 0.3000.300 mm

Max Resolution 1366768

Best Operation Resolution 1366768@60Hz

Brightness 200cd/m

Contrast 600:1

Response Time 5ms

Color 16.7M

Viewable Area 409.8230.4mm

Viewing Angle Horizontal 90, Vertical 65

Interfaces

VGA Input Port 1

HDMI Input Port 1

AC Input Port 1

Power Supply AC 100-240V; 50/60Hz

Consumption 25W

Standby Power

Consumption 0.5W

Operation Temperature 0C~40C (32F~104F)

Operation Humidity 10%~85%

Storage Temperature: -20C~55C (-4F~131F)

Storage Humidity: 5%~95%

Bezel Material Plastic

Bezel Color Black

Wall-mounting Dot Site 7575mm

Wall-mounting Thread M4

Device Dimensions 446335148mm

Package Dimensions 490333101mm

G.W. 3.5Kg

N.W. 2.8Kg

Standard Package

Display Unit 1

VGA Cord 1

User Manual 1

Power Cord 1

11

Structure Figure

12