Hikvision DS-PK1-LRT-HWB Keypad Operation's Manual PDF

1 of 8
1 of 8

Summary of Content for Hikvision DS-PK1-LRT-HWB Keypad Operation's Manual PDF

0

Wired Keypad

Operation Command

Wired Keypad Operation Command

1

Legal Information

2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information

hereinafter are for description and explanation only. The information contained in the Manual is subject to change,

without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision

website (https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks

and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS

HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION

MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY

QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO

EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,

INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,

CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT

(INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT,

EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION

SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES

RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,

HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE

FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING

THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT

LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY

RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ILLEGAL HUNTING ANIMALS, INVASION OF PRIVACY OR ANY OTHER

PURPOSE WHICH IS ILLEGAL OR DETRIMENTAL TO THE PUBLIC INTEREST. YOU SHALL NOT USE THIS PRODUCT FOR ANY

PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE

DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED

TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

0

Arm Away arm Password/Tag+ Note: One-push arming does not need to enter the password and supports not to select area No.

Stay arm Password/Tag+

Area away arm

Password/Tag+ # +Area No.+

Area stay arm Password/Tag+ # +Area No.+

Disarm Disarm Password/Tag+

Area disarm Password/Tag+ # +Area No.+

Duress password disarm

Duress password+ Note: You need to configure duress password on the control panel WEB client first.

Silence Silence Password+ (hold >3 s)

Relay Enter relay selecting page

Password+ Note: Use ,

and # key to select the relay number, and press the

to confirm.

Settings Settings Password+ Note: Only admin and installer have permission to operate this command.

Query Query system failure

Password+ Note: Only admin, installer and operators have permission to operate this command.

Wired Keypad Operation Command

1

Alarm Fire alarm (Hold >3 s)

Panic alarm (Hold >3 s)

Medical alarm

(Hold >3 s)

Note:

1. Taghere means short swiping (swipe time 3 s).

2. In relay page: Use , and # key to select the relay number, and press the to confirm.

3. In area page: Use , and # key to select the area number, and press the , or

to confirm.

4. The password operation instructions mentioned above will first display all system faults and all zone faults of the current control panel. You need to confirm faults by the # key, and then perform the function of the next command (except for the query system fault command. After you confirm the fault, the command will end).

5. Arming process:

When the control panel starts the arming process, the keypad supports three stages of the arming process, including arming waiting, fault confirmation, and exit delay.

(1) Arming waiting stage: the keypad displays "Arming waiting".

(2) Fault confirmation stage: The keypad displays all system faults and operating area zone faults. If it is an away arming operation, confirm with the away arm key; if it is a stay arming operation, confirm with the stay arm key, and use the disarm key to cancel the fault.

(3) Exit delay stage: the keypad displays "Exit delay xxx s ", and the buzzer counts down.

Note: It only appears when the zone is the delay zone. Otherwise, the keypad displays the arming result.

Skip the arming delay through the arm key.

Note: For away arming operations, this operation is also away arming; and for stay arming operations, then this operation is also stay arming.

Cancel the arming through the disarm key.

Result:

Success: The corresponding arming indicator lights for 5 s and then lights off, and the voice prompts the operation is successful.

Wired Keypad Operation Command

2

Fail: The corresponding arming indicator does not light up, and the voice prompts that the operation has failed.

Wired Keypad Operation Command

3

Settings

Enter password and press to set keypad parameters.

User Management

The keypad displays added users.

1. Select Add User, enter user name and password, and confirm input by # key.

Note:

The user name cant be edited after adding.

2. (Optional) Select the user to enter the User Parameter page.

3. (Optional) Select Keypad Password, and enter new password to reset the keypad password.

4. (Optional) Select User Permission. Select one permission and enable it by # key. Press to confirm the permission setting.

5. Select Delete User and confirm by # key.

Tag Management

The keypad displays added tags.

1. Select Add Tag, swipe the tag and enter the tag name.

Note:

The tag name cant be edited after adding.

2. (Optional) Select Linked User. Select one user and link it by # key. Press to confirm the link setting.

3. Select the user to enter the Tag Parameter page. Select Delete Tag and confirm by # key.

Keyfob Management

The keypad displays added keyfobs.

1. Select Add Keyfob, press the keyfob and enter the keyfob name, and confirm input by # key.

2. Select the keyfob to enter the Keyfob Parameter page. Select Delete Keyfob and confirm by # key.

OSD Text

Select Text1 and Text 2, enter customized content.

Control Panel Lock/Unlock

Select Lock Control Panel or Unlock Control Panel, and confirm by # key.

Wired Keypad Operation Command

4

Note:

Only the installer has lock and unlock permissions.

When locked, you can only enter the settings page byPassword+ .

Bypass/Restore Bypass

1. Select Bypass,and select zones. Confirm by # key

2. Select Bypass Restored,and select zones. Confirm by # key.

Network Management

1. Select LAN, Wi-Fi, Cloud or Cellular Network, and confirm by # key.

2. Disable DHCP by # key, and configure network parameters.

Query

Enter password and press to check device status.

Select Control Panel Status, Zone Status, Peripheral Status or Area Status to see faults and status.

Select Control Panel Info to see model, serial number and version of the control panel.

Select Keypad Info to see model, serial number, version, bus address and bus status.

Wired Keypad Operation Command

Manualsnet FAQs

If you want to find out how the DS-PK1-LRT-HWB Hikvision works, you can view and download the Hikvision DS-PK1-LRT-HWB Keypad Operation's Manual on the Manualsnet website.

Yes, we have the Operation's Manual for Hikvision DS-PK1-LRT-HWB as well as other Hikvision manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operation's Manual should include all the details that are needed to use a Hikvision DS-PK1-LRT-HWB. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Hikvision DS-PK1-LRT-HWB Keypad Operation's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Hikvision DS-PK1-LRT-HWB Keypad Operation's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Hikvision DS-PK1-LRT-HWB Keypad Operation's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Hikvision DS-PK1-LRT-HWB Keypad Operation's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikvision DS-PK1-LRT-HWB Keypad Operation's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.