Page 3
THIS MANUAL AND ANY RELIANCE ON THIS MANUAL SHALL BE WHOLLY AT YOUR OWN RISK AND RESPONSIBILITY... TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, SECURITY BREACHES, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF OR RELIANCE ON THIS MANUAL, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES... SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY OR CERTAIN DAMAGES, SO SOME OR ALL OF THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU... Support Should you have any questions, please do not hesitate to contact your local dealer...
Page 4
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules... These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment... This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications... Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense...
Page 5
Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements... Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss... The precaution measure is divided into Warnings and Cautions: Warnings: Neglecting any of the warnings may cause serious injury or death... Cautions: Neglecting any of the cautions may cause injury or equipment damage...
Page 6
Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation... The appropriate temperature is -20 to 65...
Page 7
Please keep all wrappers after unpack them for future use... In case of any failure occurred, you need to return the device to the factory with the original wrapper... Transportation without the original wrapper may result in damage on the device and lead to additional costs...
Page 8
1... 1 Introduction ... 1 1... 2 Main Features ... 2 1... 3 Appearance ... 2
Page 9
D8E is a non-touch IC card enrollment station, used as a necessary non-touch card test machine by card issuers, chip suppliers, and testing organizations... The 100-D8E card enrollment station supports PSAM card... The size of the PSAM cassette equals to that of two SIM cards... The card enrollment station can connect to PC or other devices via USB interface... No-driver USB is applied to facilitate the installation and operation of the card enrollment station... It is a front-end device which is necessary for developing IC card-related products or integrating system... With a wide variety of well-defined APIs (Application Programming Interface), the card enrollment station can widely applied in various industries and situations, such as business, telecommunication, post, insurance, medical treatment, bank, gasoline station, parking lot, and so on...
Page 10
100-D8E Card Enrollment Station: Mifare1 card (Serial No... and content), CPU (Serial No... and content), and EM card (Serial No... )
Page 11
2... 1 USB Interface Connection Plug the wiring of USB into the USB interface of PC directly...
Page 12
2... 2 Communication When the card enrollment station is identified by the PC, its indicator will turn blue, and item HID-compliant device or USB Input Device will display in the computer control panel of PC...