Hikvision DS-D2055HU-Y Display Quick Start Guide PDF

Pages 21
Year 2021
English en
1 of 21
1 of 21

Summary of Content for Hikvision DS-D2055HU-Y Display Quick Start Guide PDF

Page 3


Page 4

FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment... FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules... These limits are designed to provide reasonable protection against harmful interference in a residential installation... This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications... However, there is no guarantee that interference will not occur in a particular installation... If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna... Increase the separation between the equipment and receiver... Connect the equipment into an outlet on a circuit different from that to which the receiver is

Page 5

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union... See the product documentation for specific battery information... The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg)... For proper recycling, return the battery to your supplier or to a designated collection point... For more information see: http://www... recyclethis... info ...

Page 6

of the nation and region... CAUTION: To reduce the risk of fire, replace only with the same type and rating of fuse... The equipment must be connected to an earthed mains socket-outlet... An all-pole mains switch shall be incorporated in the electrical installation of the building... CAUTION: This equipment is for use only with specified brackets... Use with other (carts, stands,

Page 7

and current in the product... Inserting objects will lead to electric shock or short circuit of internal parts... To avoid the risk of fire or electric shock, please keep water or other liquids away from LCD display, and please do not let objects such as paper clips or pins fall into the LCD display...

Page 8

drive only... Keep vertical when moving or using the equipment... Please put the device in a ventilated and dry place without strong vibration while working... Do not expose the product to humidity, rain, sand, sun or other places with high temperature for

Page 9

When replacing the parts of the product, please ensure that maintenance personnel use the parts designated by the manufacturer or the parts with the same performance as the original parts, so as to avoid fire, electric shock or other damage caused by the use of unauthorized parts...

Page 10

Contents Chapter 1 Overview ... 1

Page 11

1... 2 Key Features Direct-lit LED backlight with uniform brightness and no boundary shadows Ultra-high resolution, 178 viewing angle Ultra narrow bezel design Factory calibration for color uniformity Anti-glare, high definition, high brightness, high color gamut, and vivid images with rich colors Stable and 24-hour continuous working Metal casing for preventing from radiation and magnetic & electric field interference Wall-mount and modular brackets available to meet various installation requirements Screen control by the client

Page 12

0-9 Enter numbers to select the desired screen or enter the special menu such as factory menu, etc...

Page 13

Picture Settings Picture Mode: Standard/Presentation/Movie/Monitor/Text/User Brightness: 0 to 100 Color: 0 to 100 Hue: 0 to 100 Sharpness: 0 to 30 Dynamic Backlight: On/Off Backlight: 0 to 100 CSC: 0-255/16-235 Pivot: Off/90/270 Lighting: Normal/Daylight/Night Night Vision: Off/On

Page 14

Joint Settings Joint Switch: Off/On Horizontal Screens: 1 to 15 Vertical Screens: 1 to 15 Horizontal Location: 1 to 15 Vertical Location: 1 to 15 Overscan: Off/On Top Edge: 0 to 100 Bottom Edge: 0 to 100 Left Edge: 0 to 100 Right Edge: 0 to 100

Page 15

To control one screen, press IDSEL to select screen ID... To control multiple screens, press IDSEL to select screen IDs... For example, press IDSEL 0101 2 to select screen 0101 and screen 0202...

Page 16

3... 2 Operation Notice The LCD panel on the device is made by high-precision technology... However, tiny spots on the screen that are dim and dark may be observed, or when observed from side, the screen may be colorful or the brightness may appear to be uneven... Yet the above phenomena are common among LCD displays rather than faults and will not affect the performance of the LCD display... The LCD display and its accessories in this manual are subject to change without prior notice... The LCD display should be used at room temperature from 0 C to 40 C... This LCD screen contains fragile materials, which can be damaged by dropping or impact, so

Page 17

3... 3 Power Cord Connection When connecting the power supply, plug one end of the power plug into the power input on the rear panel of the LCD display, and the other end into a properly grounded power socket (AC 220 V, 50/60 Hz)... In the use of the power cord, the following points should be noted: If the LCD display is not to be used for a long time, shut down the power of the device and

Page 18

Clean the screen panel of the LCD display When wiping the screen, use a dry cloth that does not shrink, so as not to damage the surface coating of the screen... Do not use chemical fiber cloth or detergent, whose composition may cause the screen surface to fade or be damaged... Do not wipe the screen with a hard cloth or a rough and hard object, as this may damage the screen surface...

Page 19

solvents such as insecticide on the casing; do not leave the casing exposed to plastic or rubber materials for a long time; do not use chemical fiber cloth, detergent or paraffin... All of the above behaviors may cause cracking, deformation and stripping of the casing...

Page 20

You can configure and manage the screens through the client... Contact our technical support personnel to get the installation package... View the user manual of the client for more details...

Manualsnet FAQs

If you want to find out how the DS-D2055HU-Y Hikvision works, you can view and download the Hikvision DS-D2055HU-Y Display Quick Start Guide on the Manualsnet website.

Yes, we have the Quick Start Guide for Hikvision DS-D2055HU-Y as well as other Hikvision manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Start Guide should include all the details that are needed to use a Hikvision DS-D2055HU-Y. Full manuals and user guide PDFs can be downloaded from

The best way to navigate the Hikvision DS-D2055HU-Y Display Quick Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Hikvision DS-D2055HU-Y Display Quick Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Hikvision DS-D2055HU-Y Display Quick Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Hikvision DS-D2055HU-Y Display Quick Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikvision DS-D2055HU-Y Display Quick Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.