Hikvision AE-VC583I-ISF Camera Installation Guide PDF

0

Mobile Network Camera

Installation Guide

Mobile Network Camera Installation Guide

I

Legal Information

2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information

hereinafter are for description and explanation only. The information contained in the Manual is subject to change,

without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision

website (https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks

and other Hikvisions trademarks and logos are the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS

HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION

MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY

QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO

EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,

INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,

CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT

(INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT,

EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION

SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES

RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,

HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE

FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING

THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT

LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY

RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR

PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR

BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR

FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.

Mobile Network Camera Installation Guide

II

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party responsible

for compliance could void the users authority to operate the equipment.

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and

comply therefore with the applicable harmonized European standards listed under the

EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as

unsorted municipal waste in the European Union. For proper recycling, return this product

to your local supplier upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed

of as unsorted municipal waste in the European Union. See the product documentation

for specific battery information. The battery is marked with this symbol, which may include

lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the

battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Mobile Network Camera Installation Guide

III

Applicable Models

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Safety Instructions

Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

In the use of the product, you must be in strict compliance with the electrical safety Input voltage should meet limited power source or PS2 requirements regulations of the nation and region. Please refer to technical specifications for detailed information.

Input voltage should meet limited power source or PS2 requirements according to the IEC60950-1 or IEC 62368-1 standard. Please refer to technical specifications for detailed information.

Do not connect several devices to one power adapter as adapter overload may cause over- heating or a fire hazard.

Please make sure that the plug is firmly connected to the power socket.

If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.

Symbol Description

Provides additional information to emphasize or supplement important points of the main text.

Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.

Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury.

Mobile Network Camera Installation Guide

IV

TABLE OF CONTENTS Chapter 1 Packing List and Cable Description .............................................................................. 1

Packing List............................................................................................................................................................ 1

Cable Description .................................................................................................................................................. 3

Chapter 2 Installation ................................................................................................................. 4

Installation Requirements ..................................................................................................................................... 4

2.1.1 Installation Position Requirements ............................................................................................................ 4

2.1.2 Installation Surface Requirements ............................................................................................................. 4

2.1.3 Water Proof Requirements ........................................................................................................................ 4

Vertical Installation ............................................................................................................................................... 4

2.2.1 Vertical Installation Method 1 ................................................................................................................... 4

2.2.2 Vertical Installation Method 2 ................................................................................................................... 7

Horizontal Installation......................................................................................................................................... 11

Chapter 3 Angle Adjustment ..................................................................................................... 15

Adjust With Wrench ........................................................................................................................................... 15

Adjust the Body of the Camera ........................................................................................................................... 16

Mobile Network Camera Installation Guide

1

Chapter 1 Packing List and Cable Description

Before You Begin

Before unboxing, check if the package is intact. Refer to the list to make sure that all the assembly parts are included. The 3 types of packing lists of the mobile network camera is shown below.

Packing List

There are 3 type of cable available, differing on their support for power, alarm and internet interface. Please choose according to your actual need.

Packing List of Type I Camera

No Picture Name Number

1

Camera 1

2

Wrench 1

3

ST4.825

Screws

1

4

QSG 1

5

Tape 3

6

Water Proof Suit (Only Available for

RJ45 Cable)

1

Mobile Network Camera Installation Guide

2

Packing List of Type II Camera

No Picture Name Number

1

Camera 1

2

Wrench 1

3

ST4.825

Screws

1

4

QSG 1

5

Tape 3

Packing List of Type III Camera

No Picture Name Number

1

Camera 1

2

Wrench 1

3

ST4.825

Screws

1

Mobile Network Camera Installation Guide

3

4

QSG 1

5

Tape 3

Cable Description

There are 3 types of cables for the network camera, as shown in the following figures. Please refer to the relevant instructions according to the physical equipment.

Rj45 Cable

4 Core Cable

6 Core Cable

Power Interface: the camera supports 9V-36V power supply. Please connect the positive and negative poles of the power supply correctly.

Internet Interface: network signal output.

Alarm Interface: support alarm input and output.

Mobile Network Camera Installation Guide

4

Chapter 2 Installation

Installation Requirements

Before you begin

Puncture a hole on the body of the vehicle for the cable of the camera to go through. Match the

sheet metal fixed support with the hole when installing the camera.

The camera can be installed both horizontally and vertically, though the later is preferred. Typically, horizontal installation is recommended for the police vehicle, and the vertical installation is recommended for school bus and ambulance.

To install the camera vertically, two requirements should be met for the best capture performance and the ease of installation:

The height of installation should be between 1-1.6 m

The surface of installation should be vertical to the ground.

When both requirements can be met, refer to 2.2.1 Vertical Installation Method 1. If not and camera is to be installed on a tilted surface, refer to 2.2.2 Vertical Installation Method 2. On the tilted surface, the camera requires further calibration of its angle.

For the stability of the camera, two further requirements of the material of the surface of the installation should be met:

When the camera is installed on the sheet metal, its thickness should be more than 1.2 mm. If the thickness is bellow this number, it is recommended to strengthen the sheet metal with a reinforcing plate.

When the camera is installed on a plastic surface, it is recommended to strengthen the surface with a reinforcing plate.

The throwing line of the camera should not be exposed outside of the vehicle. It is recommended to get the cable connection part water-proof treatment.

Vertical Installation

Since the installation process of cameras with differing cables are the same, we take one type to

illustrate the installation process.

Mobile Network Camera Installation Guide

5

Use the hexagon wrench in the package to unfasten the two the screws at the back of the camera.

Unfasten the Screws

Take off the sheet metal from the camera, and the rubber seal of the cable from the sheet metal.

Take Off the Sheet Metal and Rubber Seal

Vertically place the sheet metal fixed support on the place where the camera is to be installed, and then fix it with the screw.

Mobile Network Camera Installation Guide

6

Fix the Sheet Metal Fixed Support

Guide the cable through the cable hole, seal the hole with the rubber seal, and install the camera back to the sheet metal fixed support.

Reinstall the Camera to the Fixed Support

Tighten the two screw on the back of the camera.

Mobile Network Camera Installation Guide

7

Tighten the Screws

Loose the screw on the two sides of the camera with the hexagon wrench, adjust the angle of the camera for the best vision and tighten the two fixation screw to avoid wobble.

Adjust the Angle of the Camera

Use the hexagon wrench in the package to unfasten the two the screws at the back of the camera.

Mobile Network Camera Installation Guide

8

Unfasten the Screws

Take off the sheet metal from the camera, and the rubber seal of the cable from the sheet metal.

Take Off the Sheet Metal and Rubber Seal

Vertically place the sheet metal fixed support on the place where the camera is to be installed, but do not tighten the screw to the end.

Mobile Network Camera Installation Guide

9

Fix the Sheet Metal Fixed Support

Guide the cable through the cable hole, seal the hole with the rubber seal.

Reinstall the Camera to the Fixed Support

Install the camera back to the sheet metal fixed support, adjust and record the angle of the camera for best vision. For details, see Chapter 3 Angle Adjustment.

Mobile Network Camera Installation Guide

10

Adjust the Angle of the Camera

Tighten the two screw on the back of the camera.

Tighten the Screws

Again guide the cable through the cable hole, seal the hole with the rubber seal.

Mobile Network Camera Installation Guide

11

Organize the Cable

Re-install the camera back to the sheet metal fixed support, adjust the angle of inclination of the camera to the angle recorded, and tighten the two fixation screw to avoid wobble.

Reinstall the Camera

Horizontal Installation

Use the hexagon wrench in the package to unfasten the two the screws at the back of the camera.

Mobile Network Camera Installation Guide

12

Unfasten the Screws

Take off the sheet metal from the camera, and the rubber seal of the cable from the sheet metal.

Take Off the Sheet Metal and Rubber Seal

Horizontally place the metal sheet on the position of installation and then fasten the screws.

Mobile Network Camera Installation Guide

13

Guide the cable through the cable hole, seal the hole with the rubber seal, and install the camera back to the sheet metal fixed support.

Install the Camera to the Fixed Support

Tighten the two screw on the back of the camera.

Mobile Network Camera Installation Guide

14

Tighten the Screws

Loose the screw on the two sides of the camera, adjust the angle of the camera for the best vision, and tighten the two fixation screw to avoid wobble.

Adjust the Angle of the Camera

Mobile Network Camera Installation Guide

15

Chapter 3 Angle Adjustment

Adjust With Wrench

The angle of the camera can be adjusted in 2 ways: adjust with the wrench and adjust the angle that it is installed on the surface of the vehicle. If the installation surface is vertical to the ground, then no need for adjusting the body of the camera.

Loose the screw on the two sides of the camera with the hexagon wrench.

Adjust the Angle With the Wrench

Adjust the angle of the camera for the best vision. The range is 80 and the scales differ by

10. After the adjustment, tighten the two fixation screw to avoid wobble.

Range And Scale

Mobile Network Camera Installation Guide

16

Adjust the Body of the Camera

When installed on a tilted surface, loosen the two screws at the back of the camera and adjust the body of the camera before adjusting the camera itself.

Loosen the Screws

The metal sheet can be opened up to 30 and both sides are supported.

Range of the Inclination Angle

Adjust the vertical vision by the moving the camera around the screw in the metal sheet.

Mobile Network Camera Installation Guide

17

Adjust the Vertical Vision

0