Hikvision DS-PDEB2-EG2-WB Button User's Manual V2 PDF

1 of 5
1 of 5

Summary of Content for Hikvision DS-PDEB2-EG2-WB Button User's Manual V2 PDF

DS-PDEB1/2-EG2-WB(B)/WE(B) Wireless Emergency Button

1

Button

DS-PDEB2-EG2-WE(B)/WB(B) DS-PDEB1-EG2-WE(B)/WB(B)

Appearance

TAMPER ButtonIndicator

TAMPER Button: Tampering Alarm: Trigger alarm when the device is disassembled. Formatting: Format the emergency button.

Indicator Alarm: Flashing red indicates the alarm is triggered. Signal Strength: In the signal strength checking mode, Signal LED turns green for 3 s: Strong. Signal LED turns orange for 3 s: Medium. Signal LED turns red for 3 s: Weak. Signal LED flashes red for 3 s: Disconnected.

3 Enrollment 1. Log in to the APP Store, download and install the App. 2. Power on the security control panel. 3. Log in the APP and tap the icon "+" . Scan the QR code or input the control panel serial No. to add the control panel.

2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU, the RoHS Directive 2011/65/EU.

replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types); disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recy- clethis.info

1

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

Button

Indicator TAMPER Button

4 Installation

Install the panic button

Check signal strength Enter the signal checking mode by operating on the control panel. Solid green for 3 s: Strong signal. Solid orange for 3 s: Medium signal. Solid red for 3 s: Weak signal. Red flashes for 3 s: Lost signal.

1 Enroll the Peripheral Locally

Enroll the Peripheral

2. Log in to the APP Store, download and install the App. 3. Power on the security control panel. 4. Log in the APP and tap the icon "+" . Scan the QR code or input the control panel serial No. to add the control panel.

1. In the APP, tap the "Enrollment Mode" button on the control panel page to make the control panel enter the enrollment status. 2. Trigger the peripheral, and it will be automatically enrolled to the control panel.

2

1. In the APP, tap the icon "+"and scan the QR code or serial No. on the peripheral. 2. Trigger the peripheral, and it will be automatically enrolled to the control panel.

Signal Strength Test

xxxx or

2

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

1. Insert and rotate the screwdriver in the groove to disassemble the device. 2. Secure the device to the wall with two screws through the holes in the rear panel. 3. Align the front panel and the rear panel and buckle them together.

KA3 25

1. Remove the four screws in the rear panel to disassemble the device. 2. Replace the battery.

5 Test

6 REPLACE BATTERY

Trigger the emergency button, and the LED indicates the operation result.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. REPLACEMENT OF A BATTERY WITH AN INCORRECT TYPE THAT CAN DEFEAT A SAFEGUARD.

CAUTION

CHEMICAL BURNING DANGER DO NOT SWALLOW THE BATTERY KEEP NEW AND USED BATTERIES AWAY FROM THE CHILDREN.

IF YOU THINK BATTERIES MIGHT HAVE BEEN SWALLOWED OR PLACED INSIDE ANY PART OF THE BODY, SEEK IMMEDIATE MEDICAL ATTENTION.

CAUTION

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUC- TIONS AND LOCAL REGULATION.

1

2

1.Button 2.Alarm Received

or

1

2

3

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

DS-PDEB1/2-EG2-WE(B)

DS-PDEB1/2-EG2-WB(B)

7 Function

8

9

10 Operation Caution and Device Maintenance - All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region. - Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). - Please make sure that the power has been disconnected before you wire, install or dismantle the device. - If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. - Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). - Do not place the device in extremely hot (refer to the specification of the device for the detailed operation temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation. - The device for indoor use shall be kept from rain and moisture. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). - Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time. - Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. - Do not expose the device to the corrosive gas. Otherwise the equipment damage may occur. - Do not expose the device to the explosive situation.

Function Description

Panic Alarm Press the button to trigger the alarm while in emergency condition. The LED keeps red for 2 s.

Medical Alarm Set the panic button as medical button via the AX PRO client. Press the button to trigger the alarm while in emergency condition. The LED keeps red for 2 s.

Panic Alarm Press the two buttons synchronously to trigger the alarm while in emergency condition. The LED keeps red for 2 s.

Medical Alarm Set the panic button as medical button via the AX PRO client. Press the two buttons synchronously to trigger the alarm while in emergency condition. The LED keeps red for 2 s.

4

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

Set Up with App

Function

Zone Type

Enable Silent Zone Slide to green to make the zone keep silent while alarm is triggered.

Select the zone type of the detector.

Description

You can view the device status including temperature, signal intensity,battery level, connection, 24-hour zone, and operation mode on the device page. Tap the button to enter the settings page.

Cross Zone

Link Camera

If the alarm triggered in both of the linked zones within the set time, two alarm messages will be reported.

Polling Rate Set the interval of heartbeat.

Signal Strength Test Enter the test mode, and view the LED indication.

Link with a camera for intruder verification.

Formatting Remove the battery. Hold the tamper button and meanwhile power the device on at the same time. The red LED flashes 3 times when the formatting is completed.

Note: When the low voltage message appears there will be at least 30 days of use.

11 Specification

5

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

Model DS-PDEB1/2-EG2-WB(B)/WE(B)

Feature

Button 1/2

Tamper Protection Front,Rear

Environment Temperature Indicator Support

Signal Strength Indicator Support

Interface LED Indicator Blue(Alarm)

Transmission

Transmission Technology Tri-X Wireless

Transmission Method Two-Way RF Wireless

Transmission Frequency 433 MHz/868 MHz

Transmission Security AES-128 Encryption

Transmission Range(Free Space) 800 m(433 MHz)/1.2 Km(868 MHz)

Frequency Hopping Support

Enrolling Method Power up,Remote ID,QR Code

Electrical Characteristics

Power Supply Battery Powered

Battery Type CR2450 x 1 (included) 620 mAh capacity

Consumption Quiescent Current: 25 uA

Max: 36.89 mA

Low voltage level 2.60 V

Typical Voltage 3 V

Standard Battery Life 3 years in work status (being triggered 20 times per day)

General

Operation Temperature -10 C to 55 C (14 F to 131 F)

Storage Temperature -20 C to 60 C (-4 F to 140 F)

Operation Humidity 10% to 90%

PS type Type C

Dimension(WxHx

Manualsnet FAQs

If you want to find out how the DS-PDEB2-EG2-WB Hikvision works, you can view and download the Hikvision DS-PDEB2-EG2-WB Button User's Manual V2 on the Manualsnet website.

Yes, we have the User's Manual for Hikvision DS-PDEB2-EG2-WB as well as other Hikvision manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Hikvision DS-PDEB2-EG2-WB. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Hikvision DS-PDEB2-EG2-WB Button User's Manual V2 is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Hikvision DS-PDEB2-EG2-WB Button User's Manual V2 consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Hikvision DS-PDEB2-EG2-WB Button User's Manual V2 free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Hikvision DS-PDEB2-EG2-WB Button User's Manual V2, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikvision DS-PDEB2-EG2-WB Button User's Manual V2 as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.