Hikvision DS-3WF01C-2N Bridge Quick Start Guide PDF

DS-3WF01C-2N Quick Start Guide

i

DS-3WF01C-2N

Quick Start Guide

DS-3WF01C-2N Quick Start Guide

i

Quick Start Guide

COPYRIGHT 2019 Hangzhou Hikvision Digital Technology Co., Ltd.

ALL RIGHTS RESERVED.

Any and all information, including, among others, wordings, pictures, graphs are the properties of

Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be

Hikvision). This user manual (hereinafter referred to be the Manual) cannot be reproduced,

changed, translated, or distributed, partially or wholly, by any means, without the prior written

permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,

guarantees or representations, express or implied, regarding to the Manual.

About this Manual

This Manual is applicable to DS-3WF01C-2N (Product Series).

The Manual includes instructions for using and managing the product. Pictures, charts, images and

all other information hereinafter are for description and explanation only. The information

contained in the Manual is subject to change, without notice, due to firmware updates or other

reasons. Please find the latest version in the company website

(http://overseas.hikvision.com/en/).

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvisions trademarks and logos are the properties of Hikvision in various

jurisdictions. Other trademarks and logos mentioned below are the properties of their respective

owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS

HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED AS IS, WITH ALL FAULTS AND ERRORS,

AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,

MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND

NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,

EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR

INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,

BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE

USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY

AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL

OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER

ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL

PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR

JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS

THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS

USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER

PREVAILS.

DS-3WF01C-2N Quick Start Guide

ii

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party

responsible for compliance could void the users authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the interference at

his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and

comply therefore with the applicable harmonized European standards listed under the

EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of

as unsorted municipal waste in the European Union. For proper recycling, return this

product to your local supplier upon the purchase of equivalent new equipment, or

dispose of it at designated collection points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed

of as unsorted municipal waste in the European Union. See the product documentation

for specific battery information. The battery is marked with this symbol, which may

include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return

the battery to your supplier or to a designated collection point. For more information see:

www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

DS-3WF01C-2N Quick Start Guide

iii

Applicable Models

This manual is applicable to switches below: DS-3WF01C-2N (product series).

Symbol Conventions

The symbols that may be found in this document are defined as follows.

During the installation and utilization of the device, please strictly conform to electrical safety rules in different nations and regions.

You shall acknowledge that the use of the device with Internet access might be under network security risks, please strengthen protection for your personal information and data security. If you find the device might be under network security risks, please contact with us.

Symbol Description

Provides additional information to emphasize or supplement important points of the main text.

Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.

Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury.

DS-3WF01C-2N Quick Start Guide

iv

Catalog Chapter 1 Introduction ............................................................................................................... 5

1.1 Overview .................................................................................................................................. 5

1.2 Packing List ............................................................................................................................... 5

1.3 Appearance .............................................................................................................................. 5

1.3.1 Front Panel ...................................................................................................................... 5

Chapter 2 Installation ................................................................................................................. 7

Chapter 3 Prepare ...................................................................................................................... 9

Chapter 4 Configuration ........................................................................................................... 11

DS-3WF01C-2N Quick Start Guide

5

Chapter 1 Introduction

1.1 Overview

The DS-3WF01C-2N wireless bridge can be applied to elevator internal monitoring video transmission, and can use the multi-network port to connect to the elevator advertising machine for real-time data update.

1.2 Packing List

The packing list is shown as below. If any accessories are damaged or lost, keep the package intact and contact your dealer for replacement.

Table 1-1 Packing List of DS-3WF01C-2N

1.3 Appearance

1.3.1 Front Panel

Front panel of DS-3WF01C-2N is shown as below.

Name Item Quantity

Device DS-3WF01C-2N 2

Power Adapter 12 V, 1 A 2

Mounting Bracket For installing device 2

Pole Mounting Straps For installing device 4

Quick Start Guide Instruction manual 1

DS-3WF01C-2N Quick Start Guide

6

Front Panel of DS-3WF01C-2N

Figure 1-1 DS-3WF01C-2N Front Panel

Physical Interface

The hardware interfaces of the DS-3WF01C-2N are as follows.

Figure 1-2 Physical Interface

Table 1-1 Physical Interface

Index Description

1 Access to the camera, digital signage and other equipments

2 Access to the camera, digital signage and other equipments

3 Signal strength indicator

4 12 V DC power supply port

5 Restore default factory settings

6 PoE port connection with PoE power supply

DS-3WF01C-2N Quick Start Guide

7

Chapter 2 Installation

Step 1 First install the mounting bracket on the main unit. The supporting bracket of the device contains a magnet to help the device automatically adsorb on the surface of the iron-containing material.

If the surface of the mounting device does not contain iron, please install it with the plastic ties.

Figure 2-1 Install host

Step 2 Install the AP device on top of the shaft of the elevator shaft as shown below:

Figure 2-2 Power on the device

DS-3WF01C-2N Quick Start Guide

8

Step 3 Install the CPE device on top of the elevator, as shown below:

Figure 2-3 Finish installation

The device must be installed without direct obstruction and the two devices are aligned up and down.

DS-3WF01C-2N Quick Start Guide

9

Chapter 3 Prepare

Step 1 Use a network cable to connect the computer to the LAN interface of the device to prepare the device. First, you need to configure the computer IP address and the device's default IP address to be on the same network segment. Take the Windows 7 system as an example. Click the network logo in the lower right corner of the desktop and click Open Network & Internet settings-Network and Sharing Center. As shown below.

Figure 3-1 Network & Internet settings

Step 2 Click Local Area Connection on the right and click Properties. As shown below.

Figure 3-2 Local Area Connection

DS-3WF01C-2N Quick Start Guide

10

Step 3 Double-click Internet Protocol Version 4 (TCP/IPv4). As shown below.

Figure 3-3 Internet Protocol Version 4 (TCP/IPv4)

Step 4 Configure the IP address of the computer to be the unused 192.168.1.X address in the LAN. X is any integer other than 35, 36 in 2 to 253. The subnet mask is 255.255.255.0. Click "OK" as shown below.

Figure 3-4 Configure the IP

DS-3WF01C-2N Quick Start Guide

11

Chapter 4 Configuration

After the preparation is completed, start the device configuration.

Step 1 Make sure that the IP address of the computer is inconsistent with the default IP address of the device. On the same network segment, use a browser to log in to the device, open a browser, and enter the default IP address of the device in the address bar: 192.168.1.35 / 192.168.1.36.

When you log in to the device for the first time, click Enter, enter the device activate page. The user name is admin, and the user password is set by the user. You also need to select your password, country, language and time zone, as shown in Figure 4-1. Check "I agree to these terms of use" and click "Activate" to jump to login page, as shown in Figure 4-2. Take the AP device as an example.

Figure 4-1 Activate

DS-3WF01C-2N Quick Start Guide

12

Figure 4-2 login

Step 2 The first page shown after log in is the Wizard page, and this page helps to set the basic network parameters. The default mode is Bridge mode, and the default LAN IP address of AP device is 192.168.1.35, the default LAN IP address of CPE device is 192.168.1.36.

If there are several devices connected in the Point-to-Point or Point-to-Multi-Point topologies, they must be configured to different IP address to avoid conflicts.

AP: In this scenario mode, the device will be set to access point mode; it can be connected to a client device. When you close the TDMA function, your phone or laptop can connect to the device.

CPE: In this scenario mode, the device will be set to client mode; it can be connected to an access point device.

The default SSID of the AP device and the CPE device must be the same to directly interconnect and transmit audio, video or data. If there are other DS-3WF01C-2N devices within 500 meters, the SSID should be changed to be different in order to avoid connection confusion.

Click Save & Apply button, the device will reboot and apply your configuration.

DS-3WF01C-2N Quick Start Guide

13

Figure 4-3 Wizard

Users can also click the Network bar at the top of the page to enter the Wireless page, click the Edit button and modify the network name, frequency, key and other parameters.

DS-3WF01C-2N Quick Start Guide

14

Figure 4-4 Wireless

For the CPE device configuration, please refer to the AP device configuration.