Hikvision DS-KIS101-FLUSH Analog Kit User's Manual PDF

Video Intercom Analog Bundle

User Manual

Legal Information

2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website ( https://www.hikvision.com/ ). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks

and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN

Video Intercom Analog Bundle User Manual

i

CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.

Data Protection During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image. As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as, implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the effectiveness of your security controls.

Video Intercom Analog Bundle User Manual

ii

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol Description

Danger Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury.

Caution Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.

Note Provides additional information to emphasize or supplement important points of the main text.

Video Intercom Analog Bundle User Manual

iii

Safety Instruction

Warning All the electronic operation should be strictly compliance with the electrical safety

regulations, fire prevention regulations and other related regulations in your local region.

Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required value.

Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard.

Please make sure that the power has been disconnected before you wire, install or dismantle the device.

When the product is installed on wall or ceiling, the device shall be firmly fixed. If smoke, odors or noise rise from the device, turn off the power at once and

unplug the power cable, and then please contact the service center. If the product does not work properly, please contact your dealer or the nearest

service center. Never attempt to disassemble the device yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.)

Caution Do not drop the device or subject it to physical shock, and do not expose it to high

electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage).

Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation.

The device cover for indoor use shall be kept from rain and moisture. Exposing the equipment to direct sun light, low ventilation or heat source such as

heater or radiator is forbidden (ignorance can cause fire danger). Do not aim the device at the sun or extra bright places. A blooming or smear may

occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time.

Video Intercom Analog Bundle User Manual

iv

Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of the fingers may erode the surface coating of the device cover.

Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents.

Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs.

Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer.

Input voltage should meet both the SELV and the Limited Power Source according to 60950-1 standard.

The power supply must conform to LPS. The recommended adaptor models and manufacturers are shown as below. Use the attached adapter, and do not change the adaptor randomly.

Model Manufacturer Standard

ADS-24S-12 1224GPCN SHENZHEN HONOR ELECTRONIC CO.,LTD

CEE

G0549-240-050 SHENZHEN GOSPELL DIGITAL TECHNOLOGY CO.,LTD

CEE

TS-A018-120015Ec SHENZHEN TRANSIN TECHNOLOGIES CO., LTD

CEE

Video Intercom Analog Bundle User Manual

v

Regulatory Information

FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

Video Intercom Analog Bundle User Manual

vi

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/ 65/EU

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info

Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. this device may not cause interference, and 2. this device must accept any interference, including interference that may

cause undesired operation of the device.

Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :

Video Intercom Analog Bundle User Manual

vii

1. l'appareil ne doit pas produire de brouillage, et 2. l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique

subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Cet quipement doit tre install et utilis une distance minimale de 20 cm entre le radiateur et votre corps.

Video Intercom Analog Bundle User Manual

viii

Contents

1 About this Maunal ...................................................................................... 1

2 Appearance Description ............................................................................. 2

2.1 Appearance of Door Station .............................................................................. 2

2.2 Appearance of Indoor Station ........................................................................... 3

3 Terminal and Wiring Description ................................................................ 5

3.1 Terminal Description ......................................................................................... 5

3.2 Wiring Description ............................................................................................ 7

3.2.1 Door Lock Wiring ...................................................................................... 7

3.2.2 Door Contact Wiring ................................................................................. 9

3.2.3 Exit Button Wiring .................................................................................. 10

3.3 Typical Application .......................................................................................... 11

4 Installation ................................................................................................ 13

4.1 Door Station Installation ................................................................................. 13

4.1.1 DIP Switch Settings ................................................................................. 13

4.1.2 Accessory Introduction ........................................................................... 14

4.1.3 Surface Mounting without Gang Box ..................................................... 16

4.1.4 Flush Mounting with Junction Box ......................................................... 17

4.1.5 Flush Mounting with Gang Box(Type I) ................................................... 18

4.1.6 Flush Mounting with Gang Box(Type II) .................................................. 19

4.2 Indoor Station Installation .............................................................................. 20

4.2.1 Configure Ringtone ................................................................................. 20

4.2.2 Wall Mounting ........................................................................................ 21

Video Intercom Analog Bundle User Manual

ix

5 Local Operation ........................................................................................ 24

A. Cables ...................................................................................................... 26

B. Communication Matrix and Device Command ....................................... 28

Video Intercom Analog Bundle User Manual

x

1 About this Maunal

Get the manual and related software from or the official website ( http:// www.hikvision.com ).

Product Model

Two-Wire Door Station DS-KV1101-ME2

Two-Wire Indoor Station DS-KH1200

Video Intercom Analog Bundle User Manual

1

2 Appearance Description

2.1 Appearance of Door Station

Figure 2-1 Appearance

Table 2-1 Description

No. Description No. Description

1 Camera 6 Terminals

2 Loudspeaker 7 Debugging Port

3 Call Button 8 DIP Switch

4 Microphone 9 Screw for Volume Adjustment

5 TAMPER

Note

The debugging port is used for debugging only.

Video Intercom Analog Bundle User Manual

2

2.2 Appearance of Indoor Station

Front Panel

Figure 2-2 Front Panel

Table 2-2 Description

No. Description No. Description

1 Screen 5 Receive/Decline

2 Microphone 6 Unlock Door 2

3 Volume- 7 Unlock Door 1

4 Volume+ 8 View/Switch

Video Intercom Analog Bundle User Manual

3

Rear Panel

Figure 2-3 Rear Panel

Table 2-3 Description

No. Description No. Description

9 Terminals 12 DIP Switch

10 Loudspeaker 13 Debugging Port

11 Power Supply Terminal

Note The appearance of the device varies according to different models. Refers

to the actual device for detailed information. The debugging port is used for debugging only.

Video Intercom Analog Bundle User Manual

4

3 Terminal and Wiring Description

3.1 Terminal Description

Terminal of Door Station

Figure 3-1 Terminal Description

Table 3-1 Terminal of Door Station

Type Name Description

Cascade LP For the access of Indoor Station

LN

ALARM IN AIN1 For the access of Exit Button of Door 1.

AIN2 For the access of Door Contact of Door 1.

AIN3 For the access of Exit Button of Door 2.

AIN4 For the access of Door Contact of Door 2.

GND Grounding

GND

Door Lock NO1 For the access of Door Lock 1

Video Intercom Analog Bundle User Manual

5

Type Name Description

NC1

COM1

NO2 For the access of Door Lock 2

NC2

COM2

Power Output 12VOUT 12 VDC output

GND Grounding

Terminal of Indoor Station

Figure 3-2 Terminal Description

Table 3-2 Terminal of Indoor Station

Name Description

L1P For the access of Doorbell 1.

L1N

L2P For the access of Doorbell 2.

L2N

L3P For the access of Door Station (DS-KV1101-ME2)/ Indoor Station (DS-KH1200).

L3N

Video Intercom Analog Bundle User Manual

6

Name Description

Note This terminal of the indoor station supports

connecting to the main door station. This terminal of the indoor station supports

cascade connecting to other indoor stations.

CAM For the access of Camera

GND

3.2 Wiring Description

3.2.1 Door Lock Wiring

Up to 2 door locks can be connected to the door station. You can unlock the door lock remotely via indoor station when you connected the door lock.

Note

Terminal NC/COM is set as default for accessing magnetic lock/electric bolt; terminal NO/COM is set as default for accessing electric strike.

Video Intercom Analog Bundle User Manual

7

Electric Strike Wiring

Figure 3-3 Electric Strike Wiring

Video Intercom Analog Bundle User Manual

8

Magnetic Lock Wiring

Figure 3-4 Magnetic Lock Wiring

3.2.2 Door Contact Wiring

AIN2 and AIN4 are used to connect door contact. AIN2 is used to connect door contact of the door 1. AIN4 is used to connect door contact of the door 2. Here takes door contact wiring with AIN2 for example.

Video Intercom Analog Bundle User Manual

9

Figure 3-5 Door Contact Wiring

3.2.3 Exit Button Wiring

AIN1 and AIN3 are used to connect door contact. AIN1 is used to connect door contact of the door 1. AIN3 is used to connect door contact of the door 2. Here takes door contact wiring with AIN1 for example.

Video Intercom Analog Bundle User Manual

10

Figure 3-6 Exit Button Wiring

3.3 Typical Application The typical application is shown as below. Up to 2 door stations can be connected to the indoor station. Support up to two-three hand in hand topology.

Video Intercom Analog Bundle User Manual

11

Figure 3-7 Typical Application

Video Intercom Analog Bundle User Manual

12

4 Installation

4.1 Door Station Installation

4.1.1 DIP Switch Settings

DIP switch 1 is used to coding the room No. of door station. The No. should be unique. DIP switch 2,3,4 are used to coding the unlock duration of the door station.

Figure 4-1 DIP Switch The relationship between address of door station and DIP switches is shown as below.

Table 4-1 Door Station Address

DIP 1 Address

OFF 1

ON 2

The relationship between unlock duration and DIP switches is shown as below.

Video Intercom Analog Bundle User Manual

13

Table 4-2 Unlock Duration

Unlock Durati on(s)

1 2 3 4 5 6 7 8

DIP2 OFF ON OFF ON OFF ON OFF ON

DIP3 OFF OFF ON ON OFF OFF ON ON

DIP4 OFF OFF OFF OFF ON ON ON ON

4.1.2 Accessory Introduction

The installation of door station needs accessories, including junction box, gang box (Type I & Type II), mounting plate and so on. There are 2 size of the gang boxes adapted to the device. Size 1: 75 mm (width) 75 mm (length) 46 mm (depth). Size 2: 55 mm (width) 101 mm (length) 38.5 mm (depth).

Mounting Plate The dimension of mounting plate is 82.87 mm 142 mm 43.38 mm.

Video Intercom Analog Bundle User Manual

14

Figure 4-2 Mounting Plate

Junction Box The dimension of junction box is 86.7 mm 159.91 mm 53.59 mm.

Video Intercom Analog Bundle User Manual

15

Figure 4-3 Junction Box

4.1.3 Surface Mounting without Gang Box

Video intercom villa door station supports surface mounting.

Before You Start Make sure all related equipments are power-off during the installation. Accessories that you need to prepare for installation: Mounting plate and

mounting template. Tools that you need to prepare for installation: Drill (2.846) and gradienter. Purchase the protective shield before installation.

Steps 1. Stick the mounting template on the wall. Drill the screw holes according to the

mounting template. Remove the mounting template from the wall. 2. Align and secure the mounting plate on the wall with 4 supplied screws according

to the screw holes. 3. Install the door station to the mounting plate. Fix the device on the mounting

plate with the set screw.

Video Intercom Analog Bundle User Manual

16

Figure 4-4 Surface Mounting without Gang Box

4.1.4 Flush Mounting with Junction Box

The device supports flush mounting with junction box.

Before You Start Make sure all related equipments are power-off during the installation. Accessories that you need to prepare for installation: Junction box and mounting

template. Tools that you need to prepare for installation: Drill (2.846) and gradienter. Purchase the protective shield before installation.

Steps 1. Cave the installation hole and pull the cable out.

Note

The dimension of the installation hole should be larger than the junction box.

2. Stick the mounting template into the installation hole. 3. Insert the junction box into the hole and fix it with 4 screws according to the

screw holes. 4. Insert the door station into the junction box, and fix it with set screw.

Video Intercom Analog Bundle User Manual

17

Figure 4-5 Flush Mounting with Junction Box

4.1.5 Flush Mounting with Gang Box(Type I)

The device supports flush mounting with gang box.

Before You Start Make sure all related equipments are power-off during the installation. Accessories that you need to prepare for installation: Gang box and mounting

plate. Tools that you need to prepare for installation: Drill (2.846) and gradienter. Purchase the protective shield before installation.

Steps 1. Cave the installation hole in the wall.

Note

The dimension of the installation hole should be larger than the gang box.

2. Insert the gang box to the hole chiseled on the wall. 3. Fix the mounting plate to the gang box with 2 screws.

Note

The dimension of the gang box is 75mm(width) 75 mm(length) 46 mm(depth), the left and right holes will be applies.

Video Intercom Analog Bundle User Manual

18

4. Secure the door station to the mounting plate with the set screw.

Figure 4-6 Flush Mounting with Gang Box (Type I)

4.1.6 Flush Mounting with Gang Box(Type II)

The device supports flush mounting with gang box.

Before You Start Make sure all related equipments are power-off during the installation. Accessories that you need to prepare for installation: Gang box and mounting

plate. Tools that you need to prepare for installation: Drill (2.846) and gradienter. Purchase the protective shield before installation.

Steps 1. Cave the installation hole in the wall.

Note

The dimension of the installation hole should be larger than the gang box.

2. Insert the gang box to the hole chiseled on the wall. 3. Fix the mounting plate to the gang box with 2 screws.

Note

The dimension of the gang box is 55mm(width) 101 mm(length) 38.5 mm(depth), the upper and lower holes will be applies.

4. Secure the door station to the mounting plate with the set screw.

Video Intercom Analog Bundle User Manual

19

Figure 4-7 Flush Mounting with Gang Box (Type II)

4.2 Indoor Station Installation

4.2.1 Configure Ringtone

DIP switch 1 and 2 are used to coding the ringtone of the indoor station.

Figure 4-8 DIP Switch The relationship between the ringtone and DIP switches is shown as below.

Video Intercom Analog Bundle User Manual

20

Table 4-3 Ringtone

Ringtone DIP 1 DIP 2

Ringtone 1 OFF OFF

Ringtone 2 ON OFF

Ringtone 3 OFF ON

Mute ON ON

4.2.2 Wall Mounting

It supports wall mounting. There are two installation modes.

Before You Start Make sure the device in the package is in good condition and all the assembly

parts are included. The power supply the indoor station supports is 48 VDC. Please make sure your

power supply matches your indoor station. Make sure all related equipments are power-off during the installation. Check the product specification for the installation environment. There are 2 size of the gang boxes adapted to the device. Size 1: 75 mm (width) 75 mm (length) 50 mm (depth). Size 2: 55 mm (width) 101 mm (length) 38.5 mm (depth). The dimension of mounting plate is shown as below.

Video Intercom Analog Bundle User Manual

21

Figure 4-9 Mounting Plate

Steps 1. Cave a hole in the wall.

Note

The suggested dimension fo the installation hole should be larger than the gang box.

2. Insert a gang box to the hole chiseled on the wall. 3. Fix the wall mounting plate to the gang box with 2 screws.

Note If you install the device with a gang box (75 mm(width) 75 mm(length) 46

mm(depth)), the left and right holes will be applied. If you install the device with a gang box (55 mm(width) 101 mm(length) 48.5

mm(depth)), the upper and lower holes will be applied.

4. Hook the indoor station to the wall mounting plate tightly by inserting the plate hooks into the slots on the rear panel of the indoor station, during which the lock catch will be locked automatically.

Video Intercom Analog Bundle User Manual

22

Figure 4-10 Wall Mounting

Video Intercom Analog Bundle User Manual

23

5 Local Operation

Communication You can call the resident by pressing the call button on the door station. Press the call button of the door station, all linked indoor station start ringing.

Note

While one of linked indoor stations receive the call, the others will stop ringing.

When indoor station receive the call from door station, tap Receive/Decline button on the indoor station to accept the call and tap Receive/Decline button again to hang up the call.

Unlock You can tap Unlock Door 1 button on the indoor station to unlock the door 1 when communicating with the door station or outer door station. You can tap Unlock Door 2 button on the indoor station to unlock the door 2 when communicating with the door station or outer door station.

Live View Tap View/Switch button on the indoor station to start live viewing the door station. And tap View/Switch button to exit.

Note

Indoor station only supports view the main door station.

Volume Adjustment Tap Volume+ button on the indoor station to turn up the volume of indoor station.

Video Intercom Analog Bundle User Manual

24

Tap Volume- button on the indoor station to turn down the volume of indoor station.

Video Intercom Analog Bundle User Manual

25

A. Cables

Cables and Wiring When there are multiple cores in one parallel line, only one pair of closed

cores are allowed to transmit signal. It is not allowed to use multiple pair of cores in one cable to transmit signal.

When using parallel lines, it is suggested to use those with shielding layer. If dual core or multiple core parallel lines without shielding layer are routed, stability of signal transmission can be effected. You need to run a test before installation.

Impedance of cable should not be over suggested value, or distributor cannot transmit enough power to indoor station or door station.

Strong electricity and weak electricity cannot be wired in the same route, they need to be wired separately and the distance should be more than 0.5 meter.

All the cables used need to follow the restriction in the following table.

Table A-1 Wiring Cables A

Routing Path Twisted Pair

Door Station- Indoor Station

24AWG (0.2 mm2)

20AWG (0.5 mm2)

18AWG (0.8 mm2)

16AWG (1 mm2)

Transmission Distance 70 m

Transmission Distance 100 m

Transmission Distance 100 m

Transmission Distance 100 m

Video Intercom Analog Bundle User Manual

26

Table A-2 Wiring Cables B

Routing Path Parallel lines

Door Station- Indoor Station

24AWG (0.2 mm2)

20AWG (0.5 mm2)

18AWG (0.8 mm2)

16AWG (1 mm2)

Transmission Distance 50 m

Transmission Distance 100 m

Transmission Distance 100 m

Transmission Distance 100 m

Device Installation Installation environment (temperature, moisture etc.) need to follow

requirements in specification or power output can be effected. Power consumption of modular door station (main module and sub

modules) should be less than 12W. Please reach local technical support if you are not sure about power consumption of each module. Door station should be connected to CH1 of the video/audio distributor.

Power supply must be certified by Hikvision.

Video Intercom Analog Bundle User Manual

27

B. Communication Matrix and Device Command

Communication Matrix Scan the following QR code to get the device communication matrix. Note that the matrix contains all communication ports of Hikvision access control and video intercom devices.

Figure B-1 QR Code of Communication Matrix

Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices.

Figure B-2 Device Command

Video Intercom Analog Bundle User Manual

28