Hikoki GR800 Guide Rail Handling Instructions V2 PDF

Download download
Hikoki GR800 Guide Rail Handling Instructions V2 PDF
Hikoki Manual Hikoki Guide Rail Manual Hikoki GR800 Manual Hikoki Guide Rail Handling Instructions
Pages 2
Year 2022
Language(s)
English en
1 of 2
1 of 2

Summary of Content for Hikoki GR800 Guide Rail Handling Instructions V2 PDF

Page 1

1

Handling instructions

GR 800 GR 1600

A B C

711238 (711237)

(4100077) (4100078)

(4100079)

D E

4100080

0000Book_GR800.indb 1 2022/08/25 22:19:16

Page 2

2.3 Splinter Protection, Adhesive Coating and Sliding Coating

Prior to attaching the Sliding Coating, the adhesive remains on the guide rail must be removed completely (if required using solvent)! See page 1, g. C. Splinter Protection: In new condition, the outside edge of the Splinter Protection (6) protrudes slightly beyond the cutting track of the circular saw blade. This protruding section is cut o in the rst cut. To avoid tearing, the Splinter Protection (6) should lie completely on a support when sawing. The edge of the Splinter Protection is then cutting edge of the workpiece. When changing the circular saw, it is usually necessary to replace the Splinter Protection with a new one. For easier insertion of the new Splinter Protection (6) the front area can be pulled out from the guide rail (about 23 cm) to permit a safe grip (see page 1, g. E). If the insertion by hand is too di cult, pliers can be used to pull the Splinter Protection. Since the insertion can cause lengthening of the Splinter Protection, we recommend letting the guide track rest for a while before cutting o the protruding ends of the Splinter Protection. Spare Splinter Protections can be ordered under order no. 4100077. Adhesive Coating: Replace the Adhesive Coating (4) in case of damage or strong wear. Replacements can be ordered under order no. 4100079. Sliding Coating: Replace the Sliding Coating (5) in case of damage or strong wear. Replacements can be ordered under order no. 4100078. 2.4 Extending guide rail See page 1, g. D. Using the connector (order no. 4100080) two guide rails can be joined. Align the guide rails ush. Push connector into the guide rail. Tighten the four tappets in clockwise direction using the tool provided. 2.5 Setting mitre guide See page 1, g. A. Undo the knurled screw at the bottom side of the mitre guide. Insert mitre guide into T-groove (1). Set desired angle and tighten knurled screws again by hand. Order no. 4100081

1. SPECIFIED CONDITIONS OF USE The guide rails permit precise, splinter-free sawing of planks and boards with the following HiKOKI hand-held circular saws and HiKOKI plunge-type saws: C3606DPA Various circular saws of the following manufacturers are compatible with this guide rail: Bosch, Festool, Hilti, Metabo, Makita.

2. CIRCULAR SAWS WITH GUIDE GROOVE

2.1 Clamping guide rail See page 1, g. A. Using the tensioning clamps (711237) and the quick action clamp (711238), the guide rail can be secured on the workpiece for safe working and protection from slipping. The tensioning clamps are pushed onto both sides of the guide rail into the T-slot (1). 2.2 Attaching the machine Descriptions for machines with a groove (2) in the circular saw guide plate: See page 1, g. B. - Mount the circular saw as shown on the guide rail. (The

groove (2) in the circular saw guide plate slides in the pro le (3) of t

Manualsnet FAQs

If you want to find out how the GR800 Hikoki works, you can view and download the Hikoki GR800 Guide Rail Handling Instructions V2 on the Manualsnet website.

Yes, we have the Handling Instructions for Hikoki GR800 as well as other Hikoki manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Handling Instructions should include all the details that are needed to use a Hikoki GR800. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Hikoki GR800 Guide Rail Handling Instructions V2 is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Hikoki GR800 Guide Rail Handling Instructions V2 consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Hikoki GR800 Guide Rail Handling Instructions V2 free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Hikoki GR800 Guide Rail Handling Instructions V2, simply download the document to your computer. Once downloaded, open the PDF file and print the Hikoki GR800 Guide Rail Handling Instructions V2 as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.