GE RAK160W2 Thermostat Installation Instructions PDF

1 of 96
1 of 96

Summary of Content for GE RAK160W2 Thermostat Installation Instructions PDF

TH ER

M O

ST A

T W

ir el

es s

T he

rm o

st at

w it

h tw

o f

an s

p ee

d s

OWNERS MANUAL & INSTALLATION INSTRUCTIONS

RAK160W2

49-5000637 Rev. 0 05-22 GEA

F

2 49-5000637 Rev. 0

THANK YOU FOR MAKING GE APPLIANCES A PART OF YOUR HOME.

Whether you grew up with GE Appliances, or this is your first, were happy to have you in the family.

We take pride in the craftsmanship, innovation and design that goes into every GE Appliances product,

and we think you will too.

49-5000637 Rev. 0 3

Table of Contents Safety Information .................................................... 4 Before You Begin .......................................................5 ThermostatInstallation ............................................ 7

Installing the Wireless Control card................................7 Wireless Installation .....................................................10 Wired Installation ..........................................................10

Thermostat Configuration .....................................11 Setting the clock ...........................................................12 Entering the room number ...........................................13 Configuring the Equipment Settings .............................14

Custom Energy Savings Settings ...................... 16 Using the Thermostat Settings Screens.......................17 01 FAN CONTROL MODE ........................................18 02 1ST STAGE DIFFERENTIAL - HEAT ..................19 03 2ND STAGE DIFFERENTIAL - HEAT .................20 04 1ST STAGE DIFFERENTIAL - COOL .................21 07 FORCED 2ND STAGE HEATING .......................22 17 MINIMUM SET POINT .........................................23 18 MAXIMUM SET POINT ........................................23 19 TEMPERATURE CONTROL MODE ....................24 20 AUTO CHANGEOVER SET POINT OFFSET

(DEAD BAND) ......................................................25 23 TEMPERATURE CALIBRATION .........................26

Thermostat Maintenance ......................................27 Troubleshooting ........................................................28 Technical Specifications .......................................31 Limited Warranty ......................................................32

4 49-5000637 Rev. 0

Specifications.

WARNING FIRE AND SHOCK HAZARD Always turn off power at the main power supply

before installing, cleaning or removing the thermostat. Failure to do so could result in electrical shock hazard.

Do not use on voltages over 30 VAC. Higher voltages will damage the thermostat and could cause shock or fire hazard. NOTICE

All wiring must conform to local and national electrical and building codes.

Use this thermostat only as described in this manual.

Electrical rating: 24 VAC (1830 VAC) 1 amp maximum per terminal 4 amp maximum total load Operating temperature range: 40F99F (4C37C) System Configurations: * 1 stage cool, 2 stage heat (heat pump/resistance heat) 1 stage cool, 1 stage heat (resistance heat) Terminations: *R, C, W, Y, GH, GL, B for 2-stage heat R, C, W, Y, GH, GL, for 1-stage heat Wiring (for R & C if wiring for power): Maximum wiring length is 66ft (20 meters) for AWG18 Maximum wiring length is 60ft (18 meters) for AWG20 *Default setting

IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING

49-5000637 Rev. 0 5

Before You Begin

Determine the appropriate installation location for the thermostat

The thermostat must not be installed near or on metal structures or surfaces including metal air ducting that may be in the wall.

reduce the range of the wireless signal.

A. Refer to the Zoneline Owners Manual to enable the use of a wall thermostat. For AZ45/65 Series Models, auxiliary mode 6 should be set to 6A.

B. Zoneline output is 24VAC. Be sure the jumper on the wireless control card is on the AC position jumper is connecting R and C (common) pins. This is the default position.

6 49-5000637 Rev. 0

NETWORK INSTALLATION ONLY NOTE: This section is not required unless the thermostats are

networked Pairing the Thermostat and the Control Card: In case of Network Installation with online management, the thermostat and the Control Card must be paired with a Network Programmer specific to the property before the installation. Note: Thermostat and Control Card are factory paired.

The thermostat and control card must not be powered during the pairing procedure - remove batteries from the thermostat and unplug the control card from the HVAC unit during the pairing procedure. Plug one programmer connector into the thermostat; Plug the other programmer connector into the control card. Push the black button on the programmer. The red light on the programmer should turn on and remain

steadily lit. If the red light on the programmer is blinking or is not steadily

lit, unplug the programmer from the thermostat and the control card and repeat the steps above.

Unplug the programmer from the thermostat and the control card.

Thermostat Network Programmer

Programmer Connector

Control Card

49-5000637 Rev. 0 7

Thermostat Installation Installing the Wireless Control Card Power off the Zoneline Insert the Control Card wiring harness into the thermostat

connection port on the front of the Zoneline control box cover.

AC input

Remote Thermostat Connection

Red Aux Set Button

Image 1

8 49-5000637 Rev. 0

Thermostat Installation

Installing the Wireless Control Card (cont.) Using double sided tape, attach the control card to the Zoneline

control box cover (see image 2). The wireless control card antenna must not be touching any metal components of the hvac unit. The wireless control card antenna must face the thermostat on the wall and be oriented so that any metal parts of the Zoneline do not obstruct the wireless communication to the thermostat and, in case of a network installation, to other wireless control cards and the server. The wireless control card must not be placed in the Zoneline condensation pan and must be mounted so it cannot fall into the condensation pan.

For wired applications, join the common and 24VAC wires with any code-approved low voltage field supplied connection method.

CDC/ Occupancy Note: This

connector is not required for

RAK160W2

Remote Thermostat Connection

Control Card

Image 2

49-5000637 Rev. 0 9

Thermostat Installation

Wire Color Terminal Letter Terminal Connection

Black C Common

Red R 24V

Yellow Y Compressor

White W Heat

Orange O or B Reversing Valve

Green GH Fan High

Purple GL Fan Low

NOTE: If the PTAC unit has only one (1) fan speed, connect both fan control wires Green and Purple to the fan terminal (G).

Wiring Table 24V AC

10 49-5000637 Rev. 0

Thermostat Installation Wireless Installation

GH OB W R Y C AUXGL

F

Mounting the thermostat to the wall Remove the thermostat cover; Use the supplied wall anchors and mounting screws to

secure the thermostat to the wall; Insert two (2) AA-cell batteries (not supplied) into the

thermostat battery compartment; Follow the Thermostat Configuration instructions

starting on page 11. Replace the thermostat cover and screw in the locking

screw. Wired Installation

GH OB W R Y C AUXGL

R C

F

Mounting the thermostat to the wall Connect R & C from HVAC unit to the corresponding

wires on the harness by splicing 24VAC and common wires from the thermostat into the 24VAC and common wires to the zoneline.

Remove the thermostat cover; Use the supplied wall anchors and mounting screws to

secure the thermostat to the wall; Follow the Thermostat Configuration instructions

starting on page 11. Replace the thermostat cover and screw in the locking

screw.

49-5000637 Rev. 0 11

Thermostat Configuration Once the thermostat is powered, thermostat configuration settings will appear on the thermostat screen. In order to properly operate the HVAC unit: Set the thermostat clock Enter the room number Configure the equipment settings

The thermostat configuration screens have a 30-second time-out. If no action is taken within thirty (30) seconds, the thermostat will exit configuration settings.

NOTE: You can access Thermostat Configuration settings at any time by pressing the Configuration button.

NOTE: If the thermostat is connected to a network, the settings configured online will be applied.

12 49-5000637 Rev. 0

Thermostat Configuration Setting the thermostat clock

Set the thermostat clock to current time in 24h (Military Time) format.

Use the Up and Down buttons to set the hours Press the Fan button to advance to the minutes setting Use the Up an Down buttons to set the minutes Press the F/C button to advance to the next menu

Setting the clock correctly is crucial for proper operation of the thermostat.

NOTE: The thermostat clock will need to be reset each time the batteries are replaced.

Hours Minutes

49-5000637 Rev. 0 13

Thermostat Configuration Entering the room number

Enter the room number by changing the digits on the screen. Leading zeros 0 preceding other digits will be ignored, i.e. Room number 123 should be entered as 00123.

Use the Up and Down buttons to change the digit; Press the Fan button to advance to the next digit; Press the F/C button to advance to the next menu;

Entering the room number correctly is crucial for proper operation of networked systems.

14 49-5000637 Rev. 0

Thermostat Configuration Configuring the Equipment Settings

Use the Up and Down buttons to change the value of each setting. Reference chart below for options.

Press the Fan button to advance to the next setting. Press the Power button to save the Thermostat

Configuration and start using the thermostat. Value Compressor Type Electric Heat Reversing Valve Fan Speed

0 No Compressor No Electric Heat

O/B Contact is energized to cool N/A

1 Heat Pump* Electric Heat*

O/B Contact is en- ergized to heat*

One Fan Speed

2 Air Conditioner N/A N/A Two Fan Speeds*

3 N/A Three Fan Speeds

* Indicates default setting NOTE: If the Zoneline is an AZ45 or AZ95E model, change the compressor type to a 2.

Compressor Type

Electric Heat

Reversing Valve

Fan Speed

15 49-5000637 Rev. 0

Thermostat Configuration Testing the thermostat

Following the thermostat configuration, test if the thermostat is controlling the Zoneline unit. Press the Power button to turn the thermostat ON; Press the Down button to change the temperature set

point below the current room temperature to confirm that the thermostat initiates air conditioning.

Press the Up button to change the temperature set point above the current room temperature to confirm that the thermostat initiates heating.

Change the fan speed by touching the Fan button to test if the thermostat is controlling the fan speed.

49-5000637 Rev. 0 16

Custom Settings This thermostat comes preprogrammed to use a custom energy setting. To change any of these presets, follow the instructions below. Accessing the Thermostat Settings With the thermostat turned on, press and hold the Configuration button until the first thermostat settings screen appears. The thermostat must be turned on to access the thermostat settings.

NOTE: If the thermostat is connected to a network, the settings configured online will be applied. Use the Up and Down buttons to change the setting; Press the F/C button to advance to the next setting; Press the Fan button to return to the previous setting; Press the Power button to save and exit thermostat

settings.

17 49-5000637 Rev. 0

Custom Settings Using the Thermostat Settings Screens

Use the Up and Down buttons to change the setting. Press the F/C button to advance to the next setting. Press the Fan button to return to the previous setting. Press the Power button to save and exit thermostat

settings. The above is a representation of how to read the digits on the thermostat screen.

Setting Value Screen Number

49-5000637 Rev. 0 18

Custom Settings 01 FAN CONTROL MODE

Select Fan Control Mode: 00 - MANUAL - guest can select automatic or continuous

fan mode. 01* - AUTOMATIC - fan runs only when there is a

demand for heating or air conditioning. * Indicates default setting.

19 49-5000637 Rev. 0

Custom Settings 02 1ST STAGE DIFFERENTIAL - HEAT

(0.2F - 3.0F; 1.0F* default setting) Select the number of degrees** the thermostat has to sense between the automatic changeover temperature for heat and the room temperature before a call for the 1st stage heating is initiated.

** above the dead band offset (refer to page 25)

49-5000637 Rev. 0 20

Custom Settings 03 2ND STAGE DIFFERENTIAL - HEAT

(1.0F - 2.0F; 1.0F* default setting) Select the difference between 1st stage heating and 2nd stage heating initiation.

21 49-5000637 Rev. 0

Custom Settings 04 1ST STAGE DIFFERENTIAL - COOL

(0.2F - 3.0F; 1.0F* default setting) Select the number of degrees** the thermostat has to sense between the automatic for cool and the room temperature before a call for the 1st stage cooling is initiated.

**below the dead band offset (refer to page 25)

22 49-5000637 Rev. 0

Custom Settings 07 FORCED 2ND STAGE HEATING

(00 - 60; 15* default setting) Select a number of minutes 1st stage heating will run before 2nd stage heating is automatically initiated if the guest set point is not reached and the 2nd stage heating is not initiated through differential settings. This feature allows automatically turning on 2nd stage heating to avoid excessive compressor use. Set to 00 to disable the feature.

23 49-5000637 Rev. 0

Custom Settings 17 MINIMUM SET POINT

(64F - 84F; 66F* default setting) Select the minimum set point in F that a guest can select.

18 MAXIMUM SET POINT

(60F - 82F; 78F* default setting) Select the maximum set point in F that a guest can select.

24 49-5000637 Rev. 0

Custom Settings 19 TEMPERATURE CONTROL MODE

Select Temperature Control Mode: 00 - MANUAL - Allows users to select HEAT only or

COOL only temperature control mode to maintain the room temperature.

01* - AUTOMATIC - Thermostat automatically turns on heating or air conditioning to maintain the room temperature at the selected temperature set point.

* Indicates default setting

25 49-5000637 Rev. 0

Custom Settings 20 AUTO CHANGEOVER SET POINT OFFSET

(DEAD BAND)

(00F - 05F; 01F* default setting) Select the difference between the guest-selected set point and the heat and the cool set point when the thermostat is in the automatic temperature control mode. This value plus the 1st stage differential defined in settings 02 and 04, defines the temperature at which the thermostat would automatically change heating/cooling modes. This feature allows adjusting the dead band between the heat and the cool set points in automatic changeover mode in order to avoid the system from bouncing back and forth between heating and cooling under normal operating conditions.

26 49-5000637 Rev. 0

Custom Settings 23 TEMPERATURE CALIBRATION

(-5.0F - 5.0F; 0.0F* default setting) Calibrate the temperature display: +/- 5.0F

27 49-5000637 Rev. 0

Thermostat Maintenance Replacing Thermostat Batteries The low battery indicator will be displayed on the thermostat screen when it is necessary to replace batteries in the thermostat. Under normal operating conditions, new brand-name alkaline batteries will last for a period of approximately one (1) year. Please replace batteries every twelve (12) months to ensure continuous thermostat operation. To replace thermostat batteries: Remove the thermostat cover; Replace the two (2) AA-cell batteries (not-supplied); Replace the thermostat cover; Follow the Thermostat Configuration instructions to set

the thermostat clock; Press the Power button to start using the thermostat; NOTE: The thermostat maintains all the Thermostat Configuration settings in a non-volatile memory. There is no need to configure the thermostat again after battery replacement. NOTE: While batteries are not required in a wired installation, batteries should be installed to prevent re-configuring the time on the thermostat if a power failure occurs.

49-5000637 Rev. 0 28

Troubleshooting Error Codes

ERR1 - Thermostat Temperature Sensor Hardware Defect ERR2 - Thermostat Radio Hardware Defect ERR3 - Thermostat Radio Software Defect ERR4 - No link with the Wireless Control Card ERR5 - Thermostat Memory Defect

NOTES: For ERR1, ERR2, ERR3, and ERR5, call GE Appliances service. (Phone number located in Limited Warranty section on page 32. For ERR4, reset the configurations starting on page 5.

29 49-5000637 Rev. 0

Troubleshooting

The thermostat is not controlling the HVAC unit. Check if the HVAC unit is set to External Thermostat (Class 2) mode. Refer to Zoneline Owners Manual, Aux settings. Verify the status of the red light on the Wireless Control Card. The red light is off

The Wireless Control Card is not powered. Verify that the Wireless Control Card is properly wired to the HVAC unit-specifically make sure that the RED and the BLACK wire are properly connected.

If the red light is blinking with one (1) flash. The Wireless Control Card is powered but it is not communicating with the thermostat, turn the thermostat off and on to re-initiate the linking procedure. In case of a Network Installation, re-link the thermostat and the Wireless Control Card with the Network Programmer.

The red light is blinking with three (3) flashes. The Wireless Control Card is communicating with the thermostat. Verify that the Wireless Control Card is properly wired to the HVAC unit and that equipment settings on a thermostat - compressor type, electric heat and reversing valve - are properly configured.

49-5000637 Rev. 0 30

Troubleshooting Initiating a Master Reset If there are reported errors or configuration issues, the user may master reset the thermostat to its default parameters. Procedure: Remove the faceplate of the thermostat Power down the thermostat by either removing the

batteries or cutting power to the thermostat. While the thermostat is powered off, press and hold the

config button located on the control board inside the thermostat.

Restore power to the thermostat by reinstalling the batteries.

Once the screen lights up, release the config button. If the master reset was successful, the thermostat will

display 12:00,indicating all settings will be reset to default and the thermostat needs to be re-configured. Please see configuring thermostat in the manual on page 11.

Contact GE Appliances technical support at 1-844-GE4-PTAC option 1 (or 844-434-7822) if the issues are not resolved.

31 49-5000637 Rev. 0

Technical Specifications

Thermostat Wireless Control Card

Case Dimensions (Imperial) 4.015 x 5.5118 x 0.925 3.875 x 2.125 x 0.75 Case Dimensions (Metric) 102mm x 140mm x

23.5mm 98mm x 54mm x 19mm

Screen Dimensions (Imperial) 3.625 x 2.125 N/A Screen Dimensions (Metric) 92mm x 54mm N/A Operating Voltage 3V DC - 2 AA Cell Bat-

teries OR(Optional) 24V AC/DC

24V AC/DC

Control Outputs Fan High (GH) Fan Low (GL)

Compressor (Y) Heat Pump (OB)

Electric Heat (W2) Wireless Frequency 900MHz 900MHz Temperature Accuracy 1F N/A FCC ID XEYWX XEYV8ACCC

FCC STATEMENT This device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inter-

ference received, including interference that may cause undesired operation. Pursuant to part 15.21 of the FCC rules, any changes or

GE Appliances may void the users authority to operate the equipment.

32 49-5000637 Rev. 0

What GE Appliances Will Not Cover: Service trips to your location. Improper installation. If you have an installation problem, contact your installer.

You are responsible for providing adequate electrical connections to the product. Failure of the product resulting from modifications to the product or due to

unreasonable use, including failure to provide reasonable and necessary maintenance.

In commercial locations, labor necessary to move the unit, after it has been initially installed, to a location where it is accessible for service by an individual technician; or, if the instructions included in this manual have been disregarded.

Replacement of location fuses or the resetting of circuit breakers. Damage to the product caused by improper power supply voltage, accident, fire,

floods or acts of God. Incidental or consequential damage caused by possible defects with this

thermostat.

THERMOSTAT LIMITED WARRANTY

For The Period Of: GE Appliances Will Replace: One Year Full Replacement of the thermostat which fails From the date of the due to a defect in materials or workmanship. original purchase

Staple your receipt here. Proof of the original purchase date is needed to validate the warranty.

This limited warranty is extended to the original purchaser and any succeeding owner for products purchased for use within the USA and Canada. In Alaska, the limited warranty excludes the cost of shipping or service calls to your site. Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province. To know what your legal rights are, consult your local, state or provincial consumer affairs office or your states Attorney General.

Warrantor: GE Appliances, Louisville, KY 40225

EXCLUSION OF IMPLIED WARRANTIESYour sole and exclusive remedy is product exchange as provided in this Limited Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law.

For help with thermostat troubleshooting, call 1-844-GE4-PTAC option 1 (or 844-434-7822)

T he

rm o

st at

s an

s fi

l a ve

c d

eu x

vi te

ss es

d e

ve nt

ila te

ur

49-5000637 Rev. 0 05-22 GEA

TH ER

M O

ST A

T Manuel Du Propritaire Et Instructions Dinstallation

RAK160W2

F

2 49-5000637 Rev. 0

MERCI DAVOIR INTGR GE APPLIANCES DANS VOTRE FOYER.

Que vous ayez grandi avec GE Appliances ou que ce soit votre premier achat, nous sommes heureux

de vous accueillir dans notre famille.

Nous sommes fiers de nos artisans, de linnovation et de la conception faisant partie de chaque produit GE Appliances et nous croyons que vous le serez aussi.

49-5000637 Rev. 0 3

Table des matires Renseignements concernant la scurit ....................... 4 Avant de commencer ...................................................................5 Installation du thermostat ........................................................... 7

Installation de la carte de commande sans fil ...................................7 Installation sans fil ............................................................................ 10 Installation cble ........................................................................... 10

Configuration du thermostat .................................................. 11 Rglage de lhorloge ........................................................................ 12 Inscription dun numro de pice .................................................... 13 Configuration des rglages dquipement ..................................... 14

Rglages personnaliss dconomies dnergie .......... 16 Utilisation des crans de rglages du thermostat.......................... 17 01 MODE DE COMMANDE DU VENTILATEUR ...................... 18 02 1RE PHASE DIFFRENTIELLE CHAUFFAGE ................. 19 03 2E PHASE DIFFRENTIELLE CHAUFFAGE ................... 20 04 1RE PHASE DIFFRENTIELLE CLIMATISATION ........... 21 07 2E PHASE DE CHAUFFAGE AIR PULS ....................... 22 17 VALEUR DE CONSIGNE MINIMUM .................................... 23 18 VALEUR DE CONSIGNE MAXIMUM ................................... 23 19 MODE DE CONTRLE DE TEMPRATURE ..................... 24 20 COMMUTATION AUTOMATIQUE DU DCALAGE DE LA

VALEURDE CONSIGNE (ZONE MORTE) ........................... 25 23 TALONNAGE DE TEMPRATURE ................................... 26

Entretien du thermostat ........................................................... 27 Dpannage ..................................................................................... 28 Spcifications ............................................................................... 31 Garantie limite ........................................................................... 32

4 49-5000637 Rev. 0

Spcifications

AVERTISSEMENT RISQUE DINCENDIE ET DLECTROCUTION Veillez toujours mettre lalimentation lectrique hors

tension depuis la source dalimentation lectrique principale avant dinstaller, de nettoyer ou de retirer le thermostat. La dsobissance ces directives reprsente un risque dlectrocution.

Nutilisez pas de tension suprieure 30 VCA. Une tension plus leve endommagera le thermostat et causera un risque dlectrocution ou dincendie.

AVIS Tout le cblage doit tre conforme aux Codes dlectricit

locaux, nationaux et aux Codes du btiment. Utilisez ce thermostat aux seules fins dcrites dans ce manuel.

Caractristiques lectriques nominales 24 VCA (18 30 VCA) 1 A maximum par borne. Total de 4 A maximum par circuit. Gamme des tempratures de fonctionnement: 4 37 C (40 99 F). Configurations du systme : * Phase 1 de climatisation, phase 2 de chauffage (pompe chaleur/ chauffage par rsistance) phase 1 de climatisation, phase 1 de chauffage (chauffage par rsistance). Connexions : *R, C, W, Y, GH, GL, B pour chauffage 2 phases. R, C, W, Y, GH, GL pour chauffage 1 phase. Cblage (Pour R et C si cblage pour lalimentation) : Longueur maximum de cblage de 20 m (66 pi) pour un fil de calibre amricain 18. Longueur maximum de 18 m (60 pi) pour un fil de calibre amricain 20. *Rglage par dfaut

RENSEIGNEMENTS IMPORTANTS CONCERNANT LA SCURIT VEUILLEZ LIRE TOUTES LES INSTRUCTIONS AVANT LUTILISATION.

49-5000637 Rev. 0 5

Avant de commencer

Dterminez lemplacement dinstallation appropri pour votre thermostat.

Le thermostat ne doit pas tre install sur ou prs de structures mtalliques ou des conduits de circulation dair mtalliques pouvant se trouver derrire le mur.

Les structures et surfaces mtalliques peuvent rduire

A. Reportez-vous au manuel du propritaire Zoneline pour activer lutilisation dun thermostat mural. Pour les modles des sries AZ45/65, le mode auxiliaire 6 doit tre rgl sur 6A .

B. La sortie de lappareil Zoneline est de 24 VCA. Assurez- vous que le cavalier de la carte de commande sans fil est la position AC (CA) et que le cavalier est reli aux broches R et C (commun). Ceci est la position par dfaut.

6 49-5000637 Rev. 0

INSTALLATION RSEAUTE SEULEMENT REMARQUE : Cette section nest pas requise si vos thermostats

rseauts. Jumelage du thermostat et de la carte de commande: Pour une installation en rseau avec gestion en ligne, le thermostat et la carte de commande doivent tre jumels avec le programmeur de rseau spcifique de la proprit avant dtre installs. Remarque: Le thermostat et la carte de commande ont t jumels en usine.

Le thermostat et la carte de commande doivent tre hors tension pendant la procdure de jumelage. Retirez les piles du thermostat et dbranchez la carte de commande de lappareil CVCA pendant la procdure de jumelage. Raccordez un connecteur du programmeur au thermostat; Raccordez lautre connecteur du programmeur la carte de commande. Appuyez sur le bouton noir du programmeur. Le tmoin rouge sur le programmeur devrait sallumer et rester fixe. Si le tmoin rouge du programmeur clignote ou nest pas fixe, dbranchez

le programmeur du thermostat et de la carte de commande et rptez les tapes ci-dessus.

Dbranchez le programmeur du thermostat et de la carte de commande.

Thermostat Programmeur

de rseau

Connecteur du programmeur

Carte de commande

49-5000637 Rev. 0 7

Installation du thermostat Installation de la carte de commande sans fil Mettez lappareil Zoneline hors tension. Insrez le faisceau lectrique de la carte de commande dans le port

de connexion du thermostat situ devant le couvercle de la boite de commande de lappareil Zoneline.

Entre CA

Connexion distance du thermostat

Bouton de rglage rouge AUX

Image 1

8 49-5000637 Rev. 0

Installation du thermostat

Installation de la carte de commande sans fil (suite) laide de ruban adhsif double face, fixez la carte de commande sur

le couvercle du botier de commande Zoneline (voir image 2). Montez la carte de commande lintrieur de lappareil CVCA. Lantenne de la boite de commande sans fil ne doit pas toucher aucun composant mtallique de lappareil CVCA. Lantenne de la carte de commande sans fil doit faire face au thermostat mural et tre oriente de manire ce que toutes parties mtalliques de lappareil Zoneline nobstruent pas la communication sans fil vers le thermostat et, pour une installation en rseau, les autres cartes de commande sans fil vers le serveur. La carte de commande sans fil doit tre place dans le bac de condensation de lappareil Zoneline et doit tre monte de manire ne pas tomber dans le bac de condensation.

Pour les applications cbles, raccordez les fils communs et les fils 24 VCA avec toute mthode de connexion de basse tension approuve par le Code et fournie sur place.

Tlconnexion du thermostat

Carte de commande

Image 2

CDC/ Occupation

Remarque : Ce connecteur nest

pas ncessaire pour RAK160W2

49-5000637 Rev. 0 9

Installation du thermostat

Couleur du cble Lettre de borne Raccordement la borne

Noir C Commun

Rouge R 24V

Jaune Y Compresseur

Blanc W

Orange O or B Robinet inverseur

Vert GH Ventilateur Vitesse leve

Pourpre GL Ventilateur Basse vitesse

REMARQUE : Si le climatiseur monobloc terminal nest quip quavec une (1) vitesse de ventilateur, raccordez les cbles du ventilateur ensemble (vert et pourpre) la borne du ventilateur (G).

Tableau pour cblage 24 VCA

10 49-5000637 Rev. 0

Installation du thermostat Installation sans fil

GH OB W R Y C AUXGL

F

Montage du thermostat au mur Retirez le couvercle du thermostat; Utilisez les ancrages muraux et les vis de montage fournis pour fixer le

thermostat au mur; Insrez deux (2) piles AA (non fournies) dans le compartiment de pile du

thermostat; Suivez les instructions du chapitre Configuration du thermostat

commenant la page 11. Rinstallez le couvercle du thermostat et la vis dans la vis de blocage.

Installation cble

GH OB W R Y C AUXGL

R C

F

Montage du thermostat au mur Raccordez la RC de lappareil CVCA aux cbles correspondants du

faisceau en entrelaant les fils de 24 VCA et commun du thermostat aux fils de 24 VCA et commun de lappareil Zoneline.

Retirez le couvercle du thermostat; Utilisez les ancrages muraux et les vis de montage fournis pour fixer le

thermostat au mur; Suivez les instructions du chapitre Configuration du thermostat

commenant la page 11. Rinstallez le couvercle du thermostat et la vis dans la vis de blocage.

49-5000637 Rev. 0 11

Configuration du thermostat Ds que le thermostat est sous tension, les rglages de configuration du thermostat apparatront lcran du thermostat. Pour pouvoir bien faire fonctionner lappareil CVCA : Rglez lhorloge du thermostat. Inscrivez le numro de la pice. Configurez les rglages dquipement. Les crans de configuration du thermostat ont un dlai dattente de 30 secondes. Si aucune action nest entreprise dans les 30 secondes, le thermostat quittera les rglages de configuration.

REMARQUE : Vous pouvez accder aux rglages de configuration du thermostat en tout tout en appuyant sur le bouton Configuration .

REMARQUE : Si le thermostat est raccord un rseau, les rglages de configuration en ligne seront appliqus.

12 49-5000637 Rev. 0

Configuration du thermostat Rglage de lhorloge du thermostat

Rglez lhorloge du thermostat lheure actuelle en utilisant le format 24 h (de 0 24 h). Utilisez les flches vers le haut et vers le bas pour rgler

les heures. Appuyez sur le bouton Fan (ventilateur) pour

augmenter les minutes. Utilisez les flches vers le haut et vers le bas pour rgler

les minutes. Appuyez sur le bouton F/C pour passer au menu

suivant. Le rglage prcis de lhorloge est vital pour que le thermostat fonctionne correctement. REMARQUE : Lhorloge du thermostat devra tre rgle nouveau chaque fois que les piles sont remplaces.

Heures Minutes

49-5000637 Rev. 0 13

Configuration du thermostat Inscription dun numro de pice

Inscrivez le numro de la pice en modifiant les chiffres lcran. Les zros devant les autres chiffres seront ignors. Par exemple, le numro de pice 123 doit sinscrire 00123 .

Utilisez les flches vers le haut et vers le bas pour modifier le chiffre;

Appuyez sur le bouton Fan (ventilteur) pour passer au chiffre suivant;

Appuyez sur le bouton F/C pour passer au menu suivant;

Linscription du numro prcis de la pice est vitale pour que les systmes rseauts fonctionnent correctement.

14 49-5000637 Rev. 0

Configuration du thermostat Configuration des rglages dquipement

Utilisez les boutons flchs Haut et Bas pour rgler la valeur de chaque rglage. Reportez-vous au tableau ci-dessous pour les options.

Appuyez sur le bouton Fan (ventilateur) pour passer au rglage suivant.

Appuyez sur le bouton Power pour sauvegarder la configuration du thermostat et commencer utiliser le thermostat.

Valeur Type de compresseur lectrique Robinet inverseur Vitesse du

ventilateur

0 Sans compresseur

Sans

lectrique

Contact O/B excit pour

refroidir S/O

1 Thermopompe* lectrique*

Contact O/B excit pour 1 vitesse

2 Climatiseur S/O S/O 2 vitesses*

3 S/O 3 vitesses * Indique un rglage par dfaut REMARQUE : Si votre appareil Zoneline est le modle AZ45 or AZ95E, modifiez le type du compresseur comme tant un 2.

Type de compresseur lectrique

Robinet inverseur

Vitesse

15 49-5000637 Rev. 0

Configuration du thermostat Essai du thermostat

Aprs avoir effectu la configuration du thermostat, assurez- vous que le thermostat contrle lappareil Zoneline. Appuyez sur le bouton Power pour mettre le

thermostat en marche; Appuyez sur la flche vers le bas pour modifier la valeur

de consigne de la temprature sous la temprature actuelle de la pice tout en vous assurant que le thermostat a commenc refroidir la pice.

Appuyez sur la flche vers le haut pour modifier la valeur de consigne de la temprature au-del de la temprature de la pice actuelle tout en vous assurant que le thermostat a commenc chauffer la pice.

Appuyez sur le bouton Fan (ventilateur) pour modifier la vitesse du ventilateur et que le thermostat contrle la vitesse du ventilateur.

49-5000637 Rev. 0 16

Rglages personnaliss Ce thermostat est dot dun rglage dconomie dnergie personnalis prprogramm. Pour modifier lun des prrglages, suivez les instructions ci-dessous. Accs aux rglages du thermostat Pendant que le thermostat est en marche, appuyez et maintenez le bouton Configuration enfonc jusqu ce que le premier cran de rglages du thermostat saffiche. Le thermostat doit tre fonctionnel pour pouvoir accder aux rglages de ce dernier.

Bouton Configuration

REMARQUE: Si le thermostat est raccord un rseau, les rglages de configuration en ligne seront appliqus. Utilisez les flches vers le haut et vers le bas pour modifier le rglage; Appuyez sur le bouton F/C pour passer au menu suivant. Appuyez sur le bouton Fan (ventilateur) pour retourner au rglage

prcdent; Appuyez sur le bouton Power (mise en marche) pour sauvegarder

les rglages du thermostat et quitter la configuration.

17 49-5000637 Rev. 0

Utilisation des crans de rglages du thermostat

Utilisez les flches vers le haut et vers le bas pour modifier le rglage.

Appuyez sur le bouton F/C pour passer au menu suivant.

Appuyez sur le bouton Fan (ventilateur) pour retourner au rglage prcdent.

Appuyez sur le bouton Power (mise en marche) pour sauvegarder les rglages du thermostat et quitter la configuration.

Lillustration ci-dessus indique comment lire les chiffres sur lcran du thermostat.

Valeur du rglage Numro lcran

Rglages personnaliss

49-5000637 Rev. 0 18

01 MODE DE COMMANDE DU VENTILATEUR

Slection du moteur de commande du ventilateur : 00 - MANUEL - linvit peut slectionner le mode de

ventilateur automatique ou en continu. 01* - AUTOMATIQUE - Le ventilateur fonctionne

seulement lors dune demande de chauffage ou de climatisation.

* Indique un rglage par dfaut

Rglages personnaliss

19 49-5000637 Rev. 0

02 1ERE PHASE DIFFENTIELLE CHALEUR

(Rglage par dfaut de 0,2 - 3,0 F; 1,0 F*). Slectionnez le chiffre de degrs**. Le thermostat doit dtecter entre la temprature de commutation automatique pour la chaleur et la temprature ambiante avant quun appel pour le chauffage de 1re phase soit lanc.

** Au-del de lcart de la zone de sensibilit (consultez la page 25)

Rglages personnaliss

49-5000637 Rev. 0 20

03 2E PHASE DIFFRENTIELLE - CHAUFFAGE

(Rglage par dfaut 1,0 F 2,0 F; 1,0 F*) Slectionnez la diffrence entre la premire phase de chauffage et le dclenchement de la deuxime phase de chauffage.

Rglages personnaliss

21 49-5000637 Rev. 0

04 1RE PHASE DIFFRENTIELLE - CLIMATISATION

(Rglage par dfaut de 0,2 - 3,0 F; 1,0 F*). Slectionnez le chiffre de degrs**. Le thermostat doit dtecter entre la temprature de commutation automatique pour la climatisation et la temprature ambiante avant quun appel pour le chauffage de 1re phase soit lanc. ** sous lcart de la zone de sensibilit

(consultez la page 25)

Rglages personnaliss

22 49-5000637 Rev. 0

07 2E PHASE DE CHAUFFAGE AIR PULS

(Rglage par dfaut 00 - 60; 15*) Slectionnez un nombre de minutes pour la premire phase de chauffage avant que la deuxime phase de chauffage se dclenche automatiquement si la valeur de consigne dinvit nest pas atteinte et que la deuxime phase de chauffage ne passe pas aux rglages diffrentiels. Cette caractristique permet denclencher automatiquement la deuxime phase de chauffage et viter une usure excessive du compresseur. Rglez 00 pour dsactiver cette caractristique.

Rglages personnaliss

23 49-5000637 Rev. 0

17 VALEUR DE CONSIGNE MINIMUM

(Rglage par dfaut 64 F 84 F; 66 F*) Slectionnez une valeur de consigne en Farenheit(F) minimum que linvit peut slectionner.

Rglages personnaliss

18 VALEUR DE CONSIGNE MAXIMUM

(Rglage par dfaut 60 F 82 F; 78 F*). Slectionnez une valeur de consigne en Farenheit(F)maximum que linvit peut slectionner.

24 49-5000637 Rev. 0

19 MODE DE CONTRLE DE TEMPRATURE

Slections de mode de contrle de temprature: 00 - MANUEL - Permet aux utilisateurs de slectionner

les modes de contrle de temprature pour CHAUFFAGE ou CLIMATISATION seulement afin de maintenir la temprature de la pice.

01* - AUTOMATIQUE - Le thermostat dclenche automatique le chauffage ou la climatisation afin de maintenir la temprature de la pice la valeur de consigne de temprature slectionne.

* Indique un rglage par dfaut

Rglages personnaliss

25 49-5000637 Rev. 0

20 COMMUTATION AUTOMATIQUE DU DCALAGE DE LA VALEUR DE CONSIGNE (ZONE MORTE)

(Rglage par dfaut 00 F 05 F; 01 F*) Slectionnez la diffrence entre la valeur de consigne slectionne pour linvit et la valeur de consigne pour le chauffage et la climatisation lorsque le thermostat est en mode de contrle de temprature automatique. Cette valeur, plus le diffrentiel de premier stade dfini dans les rglages 02 et 04, dtermine la temprature laquelle le thermostat change automatiquement les modes de chauffage/refroidissement. Cette caractristique permet de rgler la zone morte entre les valeurs de consigne de chauffage et de climatisation en mode de commutation automatique afin dviter le passage du chauffage la climatisation du systme sous des conditions normales de fonctionnement.

Rglages personnaliss

26 49-5000637 Rev. 0

23 TALONNAGE DE TEMPRATURE

(Rglage par dfaut -5,0 F - 5,0 F; 0,0 F*). Affichage de la temprature dtalonnage : +/- 5,0 F.

Rglages personnaliss

27 49-5000637 Rev. 0

Entretien du thermostat Remplacement des piles du thermostat Le tmoin de pile faible saffichera sur lcran du thermostat lorsque ces dernires doivent tre remplaces. Sous des conditions de fonctionnement normales, une nouvelle marque de piles alcalines durera environ un (1) an. Veuillez remplacer les piles chaque 12 mois pour assurer un fonctionnement continu de votre thermostat. Pour remplacer les piles du thermostat : Retirez le couvercle du thermostat; Insrez deux (2) piles AA (non fournies); Rinstallez le couvercle; Suivez les instructions de configuration du thermostat

pour rgler lhorloge du thermostat; Appuyez sur le bouton Power pour mettre le

thermostat en marche;

REMARQUE : Ce thermostat conserve tous ses rglages de configuration dans une mmoire non volatile. Il ne sera pas ncessaire de reconfigurer le thermostat aprs avoir remplac les piles. REMARQUE : Comme les piles ne sont pas requises pour une installation cble, des piles doivent tre installes pour viter la reconfiguration de lhorloge du thermostat en cas de panne de courant.

49-5000637 Rev. 0 28

Dpannage Codes derreur

ERR1 - La quincaillerie du dtecteur de temprature du thermostat est dfectueuse.

ERR2 - La quincaillerie de tlcommunication du thermostat est dfectueuse.

ERR3 - Le logiciel de tlcommunication du thermostat est dfectueux.

ERR4 - Lien non tabli avec la carte de commande sans fil.

ERR5 - Mmoire du thermostat dfectueuse.

REMARQUES : Communiquez avec le Service de GE Appliances lorsque les erreurs ERR1, ERR2, ERR3 et ERR5 saffichent. (Le numro de tlphone se trouve dans la section de la garantie limite, page 32). Pour lERR4, reconfigurez les rglages en commenant la page 5.

29 49-5000637 Rev. 0

Dpannage Ce thermostat ne contrle pas lappareil CVCA. Assurez-vous que lappareil CVCA est rgl sous le mode Thermostat externe (clase 2). Consultez les rglages AUX dans le manuel dutilisation de lappareil Zoneline. Vrifiez ltat du tmoin rouge sur la carte de commande sans fil. Le tmoin rouge est teint.

La carte de commande sans fil nest pas sous tension. Assurez-vous que la carte de commande sans fil est cble correctement lappareil CVCA spcifique et que les cbles ROUGE et NOIR sont correctement raccords.

Si le tmoin rouge produit un (1) clignotement La carte de commande sans fil est sous tension, mais ne communique pas avec le thermostat; teignez et rallumez le thermostat pour rinitialiser la procdure de jumelage. Pour une installation en rseau, effectuez une nouvelle liaison du thermostat et de la carte de commande sans fil avec le programmeur rseau.

Le tmoin rouge produit trois (3) clignotements. La carte de commande sans fil communique avec le thermostat. Assurez-vous que la carte de commande sans fil est correctement cble lappareil CVCA et que les rglages dquipement sur le thermostat (type de compresseur, de chauffage lectrique et de robinet inverseur) sont configurs correctement.

49-5000637 Rev. 0 30

Dpannage Restauration aux paramtres dusine

Si des problmes derreurs ou de configuration se produisent, lutilisateur peut restaurer le thermostat aux paramtres dusine. Procdure Retirez la plaque frontale du thermostat Mettez le thermostat hors tension en enlevant les

piles ou en dbranchant le thermostat de la source dalimentation lectrique.

Pendant que le thermostat est hors tension, appuyez et maintenez le bouton config situ sur le tableau de contrle lintrieur du thermostat.

Rtablissez lalimentation lectrique du thermostat en rinstallant les batteries.

Ds que lcran sallume, relchez le bouton config . Si la restauration aux paramtres dusine russit,

le thermostat affichera 12 h indiquant que tous les rglages par dfaut ont t rinitialiss et que le thermostat doit tre reconfigur. Veuillez consulter le chapitre Configuration du thermostat la page 11 du manuel.

Communiquez avec le soutien technique de GE Appliances au 1 844 -GE4-PTAC option 1 (ou 1 844 434- 7822) si les problmes ne sont pas rsolus.

31 49-5000637 Rev. 0

Spcifications Thermostat

Dimensions du boitier (mesure impriale) 4.015 x 5.5118 x 0.925 3.875 x 2.125 x 0.75 Dimension du boitier (mesure mtrique) 102mm x 140mm x 23.5mm 98mm x 54mm x 19mm Dimensions de lcran (mesure impriale) 3.625 x 2.125 S.O. Dimensions de lcran (mesure mtrique) 92mm x 54mm S.O. tension de fonctionnement 3V DC - 2 AA Cell Batteries

OR(Optional) 24V AC/DC 24V AC/DC

Sorties dasservissement Ventilateur - lev (GH) Ventilateur - Faible (GL)

Compresseur (Y) Pompe chaleur (B)

900MHz 900MHz Prcision de temprature 1F S.O. FCC ID XEYWX XEYV8ACCC

NONC DE LA FCC Ce dispositif est conforme aux dispositions de la section 15 des rgles de la FCC. Son

fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer dinterfrences nuisibles; (2) Cet appareil doit tolrer les interfrences reues, y compris celles susceptibles de provoquer des oprations non dsires.

En vertu de la section 15.21 des rglements de la FCC, tout -

sment approuv par GE Appliances peut annuler le droit de lutilisateur dutiliser cet quipement.

32 49-5000637 Rev. 0

GARANTIE LIMITE DU THERMOSTAT

Priode de la garantie : GE Appliances remplacera :

Un (1) an Remplacement complet du thermostat comportant compter de la date un dfaut de matriaux ou de fabrication. du premier achat.

Ce que GE Appliances ne couvre pas : Frais de dplacement pour rparation vers votre emplacement. Une installation mal effectue. Si vous avez un problme dinstallation,

communiquez avec votre installateur. Vous tes responsable deffectuer correctement les raccords lectriques de votre produit.

Une dfectuosit du produit cause par des modifications au produit ou par son usage draisonnable, y compris le dfaut deffectuer des entretiens raisonnables et ncessaires.

Dans les locaux commerciaux, la main-duvre ncessaire pour dplacer lappareil, aprs son installation initiale, un endroit o il est accessible pour lentretien par un technicien individuel; ou, si les instructions contenues dans ce manuel nont pas t respectes.

Le remplacement des fusibles ou lenclenchement des disjoncteurs du site. Les bris du produit causs pour une tension dalimentation lectrique inadquate,

un accident, un incendie, les inondations et les cas de force majeure. Les dommages accessoires ou immatriels causs par des probabilits de

dfectuosits avec ce thermostat.

Brochez votre reu ici. Une preuve de la date dachat originale est ncessaire pour valider la garantie.

Cette garantie limite est consentie son premier acheteur et tout propritaire subsquent pour les produits achets pour utilisation aux tats-Unis et au Canada. En Alaska, la garantie limite exclut les frais dexpdition ou les appels de service vers votre site. Certains tats ou provinces nautorisent pas lexclusion ou la limitation des dommages accessoires ou immatriels. Cette garantie limite vous donne des droits lgaux spcifiques, et vous pouvez galement avoir dautres droits qui varient dun tat ou dune province lautre. Pour connatre vos droits lgaux, consultez votre bureau dinformation aux consommateurs local, provincial ou dtat ou le procureur gnral de votre tat.

Garant : GE Appliances, Louisville, KY 40225

EXCLUSION DES GARANTIES IMPLICITES - Votre seul et unique recours est lchange du produit comme prvu dans cette garantie limite. Toute garantie implicite, y compris les garanties implicites de qualit marchande ou dadaptation un usage particulier, est limite un (1) an ou la priode la plus courte permise par la loi.

Pour obtenir de laide concernant les problmes, appelez au 1 844 GEA-PTAT option 1 (ou 1 844 434-7822).

TE R

M O

ST A

TO T

er m

o st

at o

I na

l m

b ri

co c

o n

ve lo

ci d

ad es

d e

d o

s ve

nt ila

d o

re s MANUAL DEL PROPIETARIO &

INSTRUCCIONES DE INSTALACIN

RAK160W2

49-5000637 Rev. 0 05-22 GEA

F

2 49-5000637 Rev. 0

GRACIAS POR HACER QUE GE APPLIANCES SEA PARTE DE SU HOGAR

Ya sea que haya crecido con GE Appliances, o que sta sea su primera vez, estamos felices de tenerlo

en la familia.

Sentimos orgullo por la creacin, innovacin y diseo de cada producto de GE Appliances, y

creemos que usted tambin.

49-5000637 Rev. 0 3

ndice Informacin sobre Seguridad ......................................... 4 Antes de comenzar............................................................... 5 Instalacin del Termostato .................................................. 7

Instalacin de la tarjeta de Control inalmbrico ........................ 7 Instalacin Inalmbrica ........................................................... 10 Instalacin Cableada ............................................................... 10

Configuracin del Termostato ........................................ 11 Configuracin del reloj ............................................................ 12 Ingreso del nmero de sala .................................................... 13 Configuracin de los Ajustes del Equipamiento ..................... 14

Configuraciones Personalizadas de Ahorro de Energa .............................................................. 16

Uso de las Pantallas de Ajustes del Termostato .................... 17 01 MODO DE CONTROL DEL VENTILADOR .................... 18 02 PRIMERA ETAPA DIFERENCIAL - CALOR .................. 19 03 SEGUNDA ETAPA DIFERENCIAL CALOR ................ 20 04 PRIMERA ETAPA DIFERENCIAL FRO ..................... 21 07 SEGUNDA ETAPA DE CALEFACCIN FORZADA ...... 22 17 PUNTO DE CONFIGURACIN MNIMO ....................... 23 18 PUNTO DE CONFIGURACIN MXIMO ...................... 23 19 MODO DE CONTROL DE TEMPERATURA .................. 24 20 COMPENSACIN DEL PUNTO DE CONFIGURACIN

CON CAMBIO AUTOMTICO (ZONA MUERTA).... ......................................... 25

23 CALIBRACIN DE TEMPERATURA ............................. 26 Mantenimiento del Termostato ...................................... 27 Solucin de problemas...................................................... 28 Especificaciones Tcnicas .............................................. 31 Garanta Limitada ............................................................... 32

4 49-5000637 Rev. 0

Especificaciones

ADVERTENCIA RIESGO DE INCENDIOS Y DESCARGAS Siempre apague el encendido desde el suministro de corriente

principal antes de instalar, limpiar o retirar el termostato. Si no se cumple con esto, se podrn producir riesgos de descargas elctricas.

No usar con voltajes superiores a 30 VAC. Un voltaje superior daar el termostato y podr ocasionar riesgos de descargas o incendios.

AVISO Todo el cableado deber estar instalado de acuerdo con los

cdigos elctricos y de construccin locales y nacionales. Slo use este termostato como se describe en este manual.

Especificaciones elctricas: 24 VAC (1830 VAC) Mximo de 1 amperio por terminal Carga mxima total de 4 amperios Rango de temperatura de funcionamiento: 40F99F (4C37C) Configuraciones del Sistema: * fro en 1 nivel, calor en 2 niveles (bomba de calor/ resistencia al calentamiento) fro en 1 nivel, calor en 1 nivel (resistencia al calentamiento) Terminaciones: *R, C, W, Y, GH, GL, B para calor en 2 niveles R, C, W, Y, GH, GL, B para calor en 1 nivel Cableado (para R y C si se trata del cableado para la alimentacin): La longitud de cableado mxima es de 66 pies (20 metros) para AWG18 La longitud de cableado mxima es de 60 pies (18 metros) para AWG20 *Configuracin por omisin

INFORMACIN IMPORTANTE DE SEGURIDAD LEA TODAS LAS INSTRUCCIONES ANTES DEL USO

49-5000637 Rev. 0 5

Antes de Comenzar Determine la ubicacin de la instalacin apropiada para el

termostato

El termostato no deber ser instalado cerca ni sobre -

ductos metlicos de aire que puedan estar sobre la pared.

A. Consulte el Manual del Propietario del Zoneline para activar el uso de un termostato de pared. Con los Modelos de las Series AZ45/65, el modo auxiliar 6 se deber configurar en 6A.

B. La salida del Zoneline es de 24VAC. Asegrese de que el puente de la tarjeta de control inalmbrico se encuentre en la posicin AC el puente est conectando a las clavijas R y C. sta es la posicin por omisin.

6 49-5000637 Rev. 0

INSTALACIN DE RED NICAMENTE NOTA: Esta seccin no es necesaria, a menos que los

termostatos estn en red. Emparejamiento del Termostato y la Tarjeta de Control: En caso de Instalacin en Red con el manejo a travs de Internet, el termostato y la Tarjeta de Control debern estar emparejados con un Programador de Red especfico de la propiedad, antes de la instalacin. NOTA: El Termostato y la Tarjeta de Control estn emparejadas de fbrica.

El termostato y la tarjeta de control no debern ser conectados durante el proceso de emparejamiento retire las bateras del termostato y desenchufe la tarjeta de control de la unidad HVAC durante el procedimiento de emparejamiento. Enchufe un conector del programador al termostato; Enchufe el otro conector del programador en la tarjeta de control. Presione el botn negro del programador. La luz roja del programador se deber encender y permanecer

iluminada de forma pareja. Si la luz roja del programador est parpadeando o no est

iluminada de forma pareja, desenchufe el programador del termostato y de la tarjeta de control y repita los pasos anteriores.

Desenchufe el programador del termostato y de la tarjeta de control.

Termostato Programador

de Red

Conector del Programador

Tarjeta de Control

49-5000637 Rev. 0 7

Instalacin del Termostato Instalacin de la tarjeta de Control inalmbrico Apague el Zoneline. Inserte el arns del cableado de la Tarjeta de Control en el puerto de

conexin del termostato, en la parte frontal de la tapa de la caja de control del Zoneline.

Entrada de CA

Conexin Remota del Termostato

Botn de

Auxiliar Rojo

Image 1

8 49-5000637 Rev. 0

Instalacin del Termostato Instalacin de la tarjeta de Control inalmbrico (cont.) Utilizando cinta con pegamento sobre ambos lados, adhiera la tarjeta de

control sobre la tapa de la caja de control del Zoneline (vea la imagen 2). Monte la tarjeta de control dentro de la unidad hvac. La antena de la tarjeta de control inalmbrico no deber tocar ningn componente metlico de la unidad hvac. La antena de la tarjeta de control inalmbrico deber estar enfrentada hacia el termostato sobre la pared y orientada de modo que cualquier parte metlica del Zoneline no obstruya la comunicacin inalmbrica con el termostato y, en caso de una instalacin de red, a otras tarjetas de control inalmbrico y al servidor. La tarjeta de control inalmbrico no deber ser colocada sobre la bandeja de condensacin del Zoneline y deber estar montada de forma que no pueda caer en la bandeja de condensacin.

Para las aplicaciones cableadas, una los cables comunes y los de 24VAC utilizando cualquier mtodo de conexin con suministro de campo y voltaje bajo aprobado por el cdigo.

Conexin Remota del Termostato

Tarjeta de Control

Image 2

CDC/ Ocupacin

Nota: No se requiere este conector para

el modelo RAK160W2

49-5000637 Rev. 0 9

Instalacin del Termostato

Color del Cable Letra de la Terminal Terminal Connection

Negro C Comn

Rojo R 24V

Amarillo Y Compresor

Blanco W Calor

Anaranjado O o B Vlvula de Inversin

Verde GH Ventilador Alto

Morado GL Ventilador Bajo

NOTA: Si la unidad PTAC slo cuenta con una (1) velocidad de ventilacin, conecte ambos cables del control del ventila- dor Verde y Morado a la terminal del ventilador (G).

Mesa del Cableado - 24 V AC

10 49-5000637 Rev. 0

Instalacin del Termostato Instalacin Inalmbrica

GH OB W R Y C AUXGL

F

Montaje del termostato sobre la pared Retire la tapa del termostato; Use los anclajes de pared suministrados y los tornillos de montaje para

asegurar el termostato a la pared; Inserte dos (2) bateras AA (no suministradas) en el compartimiento de

bateras del termostato; Siga las instrucciones de Configuracin del Termostato a partir de la

pgina 11. Reemplace la tapa del termostato y ajuste el tornillo de bloqueo.

Instalacin Cableada

GH OB W R Y C AUXGL

R C

F

Montaje del termostato sobre la pared Conecte R y C desde la unidad HVAC hasta los cables correspondientes

del arns, empalmando los cables de 24VAC y los comunes con el termostato con los cables de 24VAC y los cables comunes del Zoneline.

Retire la tapa del termostato; Use los anclajes de pared suministrados y los tornillos de montaje para

asegurar el termostato a la pared; Siga las instrucciones de Configuracin del Termostato a partir de la

pgina 11. Reemplace la tapa del termostato y ajuste el tornillo de bloqueo.

49-5000637 Rev. 0 11

Configuracin del Termostato Una vez que el termostato se encuentre enchufado, los ajustes de configuracin del termostato aparecern en la pantalla del mismo. A fin de operar la unidad HVAC correctamente: Configure el reloj del termostato Ingrese el nmero de sala Configure los ajustes del equipamiento

Las pantallas de configuracin del termostato realizan una pausa de 30 segundos. Si no se realiza ninguna accin dentro de los treinta (30) segundos, el termostato abandonar los ajustes de configuracin.

NOTA: Usted puede acceder a los ajustes de Configuracin del Termostato en cualquier momento, presionando el botn de Configuracin.

NOTA: Si el termostato se encuentra conectado a una red, se aplicarn los ajustes configurados a travs de Internet.

12 49-5000637 Rev. 0

Configuracin del Termostato Configuracin del reloj del termostato

Configure el reloj del termostato en la hora actual en el formato de 24hs. (Horario Militar). Use los botones Up (Arriba) y Down (Abajo) para configurar

las horas. Presione el botn Fan (Ventilador) para avanzar hasta la

configuracin de minutos. Use los botones Up (Arriba) y Down (Abajo) para configurar

los minutos. Presione el botn F/C para avanzar al siguiente men.

Configurar el reloj de forma correcta es crucial para el funcionamiento correcto del termostato. NOTA: El reloj del termostato deber ser reiniciado cada vez que se reemplacen las bateras.

Horas Minutos

49-5000637 Rev. 0 13

Configuracin del Termostato Ingrese el nmero de sala

Ingrese el nmero de sala modificando los dgitos en la pantalla. Los ceros 0 que precedan a otros dgitos sern ignorados; por ejemplo: el nmero de sala 123 deber ser ingresado como 00123.

Use los botones Up (Arriba) y Down (Abajo) para modificar el dgito

Presione el botn Fan (Ventilador) para avanzar hasta el siguiente dgito;

Presione el botn F/C para avanzar al siguiente men;

Ingresar el nmero de sala correctamente es crucial para el funcionamiento correcto de los sistemas conectados en red.

14 49-5000637 Rev. 0

Configuracin del Termostato Configuracin de los Ajustes del Equipamiento

Use los botones Arriba y Abajo para cambiar el valor de cada configuracin. Consulte el siguiente cuadro para acceder a opciones.

Presione el botn Fan (Ventilador) para avanzar hasta la siguiente configuracin.

Presione el botn Power (Encendido) para guardar la Configuracin del Termostato e iniciar el uso del termostato.

Valor Tipo de Compresor

Calor Elctrico

Vlvula de Inversin Velocidad del ventilador

0 Sin Compresor Sin Calor Elctrico

El Contacto O/B recibe alimentacin

para fro N/A

1 Bomba de Calor* Calor Elctrico*

El Contacto O/B recibe alimentacin

para calor*

Velocidad de Un Ventilador

2 Acondicionador de Aire N/A N/A Velocidades de Dos

Ventiladores*

3 N/A Velocidades de Tres Ventiladores

* Indica la configuracin por omisin NOTA: Si el Zoneline es un modelo AZ45 or AZ95E, modifique el tipo de compresor a 2.

Tipo de Compresor

Calor Elctrico

Vlvula de Inversin

Velocidad del ventilador

15 49-5000637 Rev. 0

Configuracin del Termostato Prueba del termostato Siguiendo la configuracin del termostato, compruebe que el mismo est controlando la unidad del Zoneline. Presione el botn Power (Encendido) para encender el

termostato; Presione el botn Down (Abajo) para cambiar el punto de

configuracin de la temperatura por debajo de la temperatura actual de la sala, a fin de confirmar que el termostato inici el acondicionador de aire.

Presione el botn Up (Arriba) para cambiar el punto de configuracin de la temperatura por encima de la temperatura actual de la sala, a fin de confirmar que el termostato inici la calefaccin.

Modifique la velocidad del ventilador presionando el botn Fan (Ventilador) para comprobar que el termostato est controlando la velocidad del ventilador.

49-5000637 Rev. 0 16

Configuraciones Personalizadas Este termostato cuenta con una programacin previa para el uso del ahorro de energa personalizado. Para modificar cualquiera de estas configuraciones previas, siga las instrucciones a continuacin. Acceso a las Configuraciones del Termostato Cuando el termostato se encuentre encendido, mantenga presionado el botn Configuracin hasta que la primera pantalla de configuraciones del termostato aparezca. El termostato deber ser encendido para acceder a sus configuraciones.

Botn Configuration (Configuracin).

NOTA: Si el termostato se encuentra conectado a una red, se aplicarn los ajustes configurados a travs de Internet. Use los botones Up (Arriba) y Down (Abajo) para modificar la

configuracin; Presione el botn F/C para avanzar a la siguiente configuracin; Presione el botn Fan (Ventilador) para regresar a la configuracin

previa; Presione el botn Power (Encendido) para guardar las configuraciones

del termostato y salir de las mismas.

17 49-5000637 Rev. 0

Uso de las Pantallas de Ajustes del Termostato

Use los botones Up (Arriba) y Down (Abajo) para modificar la configuracin.

Presione el botn F/C para avanzar a la siguiente configuracin.

Presione el botn Fan (Ventilador) para regresar a la configuracin previa.

Presione el botn Power (Encendido) para guardar las configuraciones del termostato y salir de las mismas.

La anterior es una representacin de cmo leer los dgitos de la pantalla del termostato.

Valor de la

Screen Number

Configuraciones Personalizadas

49-5000637 Rev. 0 18

01 MODO DE CONTROL DEL VENTILADOR

Seleccione el Modo de Control del Ventilador 00 - MANUAL el usuario podr seleccionar el modo de

ventilador automtico o continuo. 01* - AUTOMTICO el ventilador funciona slo cuando existe

una demanda de la calefaccin o del acondicionador de aire.

* Indica la configuracin por omisin.

Configuraciones Personalizadas

19 49-5000637 Rev. 0

02 PRIMERA ETAPA DIFERENCIAL - CALOR

(configuracin por omisin 0.2F - 3.0F; 1.0F*) Seleccione el nmero de grados** que el termostato debe sentir entre la temperatura con cambio automtico para calor y la temperatura de la sala antes de que se inicie la primera etapa de calor.

** por encima de la compensacin de la zona muerta (consulte la pgina 25)

Configuraciones Personalizadas

49-5000637 Rev. 0 20

03 SEGUNDA ETAPA DIFERENCIAL CALOR

(configuracin por omisin 1.0F - 2.0F; 1.0F*) Seleccione la diferencia entre la iniciacin de la primera etapa de calor y la segunda etapa de calor.

Configuraciones Personalizadas

21 49-5000637 Rev. 0

04 PRIMERA ETAPA DIFERENCIAL FRO

(configuracin por omisin 0.2F - 3.0F; 1.0F*) Seleccione el nmero de grados** que el termostato debe sentir entre un cambio automtico para fro y la temperatura de la sala antes de que se inicie la primera etapa de fro.

** por debajo de la compensacin de la zona muerta (consulte la pgina 25)

Configuraciones Personalizadas

22 49-5000637 Rev. 0

07 SEGUNDA ETAPA DE CALEFACCIN FORZADA

(configuracin por omisin 00 - 60; 15*) Seleccione el nmero de minutos que funcionar la primera etapa de calefaccin antes de que la segunda etapa de calefaccin sea iniciada automticamente si no se alcanza el punto de configuracin de un visitante y la segunda etapa de calefaccin no se inicia a travs de configuraciones diferenciales.

Esta funcin permite iniciar de forma automtica la segunda etapa de calefaccin y evitar un uso excesivo del compresor.

Configurar en 00 para desactivar la funcin.

Configuraciones Personalizadas

23 49-5000637 Rev. 0

17 PUNTO DE CONFIGURACIN MNIMO

(configuracin por omisin 64F - 84F; 66F*) Seleccione el punto de configuracin mnimo en F que un visitante puede seleccionar.

Configuraciones Personalizadas

18 PUNTO DE CONFIGURACIN MXIMO

(configuracin por omisin 60F - 82F; 78F*) Seleccione el punto de configuracin mximo en F que un visitante puede seleccionar.

24 49-5000637 Rev. 0

19 MODO DE CONTROL DE TEMPERATURA

Seleccione el Modo de Control de Temperatura: 00 - MANUAL Permite a los usuarios seleccionar el

modo de control de temperatura HEAT (Calor) nicamente o COOL (Fro) nicamente, a fin de mantener la temperatura de la sala.

01* - AUTOMTICO El termostato enciende de forma automtica la calefaccin o el acondicionador de aire para mantener la temperatura de la sala en el punto de configuracin de temperatura seleccionado.

* Indica la configuracin por omisin

Configuraciones Personalizadas

25 49-5000637 Rev. 0

20 COMPENSACIN DEL PUNTO DE CONFIGURACIN CON CAMBIO AUTOMTICO (ZONA MUERTA)

(configuracin por omisin 00F - 05F; 01F*) Selecciona la diferencia entre el punto de configuracin seleccionado por un visitante y el punto de configuracin de calor y de fro cuando el termostato se encuentra en el modo de control de temperatura automtica. Este valor ms el diferencial de la primera etapa definido en las configuraciones 02 y 04 define la temperatura en la cual el termostato cambiara de forma automtica los modos de calefaccin/ refrigeracin. Esta funcin permite ajustar la zona muerta entre los puntos de configuracin de calor y de fro en el modo de cambio automtico, a fin de evitar que el sistema alterne hacia atrs y adelante entre la calefaccin y la refrigeracin bajo condiciones de funcionamiento normal.

Configuraciones Personalizadas

26 49-5000637 Rev. 0

23 CALIBRACIN DE LA TEMPERATURA

(configuracin por omisin -5.0F - 5.0F; 0.0F*) Calibra la pantalla de temperatura: +/- 5.0F.

Configuraciones Personalizadas

27 49-5000637 Rev. 0

Mantenimiento del Termostato Reemplazo de las Bateras del Termostato Bajo condiciones de funcionamiento normal, las bateras alcalinas nuevas y de una marca reconocida durarn por un perodo de aproximadamente un (1) ao. Bajo condiciones de funcionamiento normal, las bateras alcalinas nuevas y de una marca reconocida durarn por un perodo de aproximadamente un (1) ao. Por favor, reemplace las bateras cada doce (12) meses, a fin de asegurar un funcionamiento continuo del termostato. Para reemplazar las bateras del termostato: Retire la tapa del termostato; Reemplace las dos (2) bateras AA (no suministradas); Reemplace la tapa del termostato; Siga las instrucciones de Configuracin del Termostato

para configurar el reloj del mismo; Presione el botn Power (Encendido) para comenzar a

usar el termostato; NOTA: El termostato mantiene todos los ajustes de Configuracin del Termostato en una memoria no voltil. No hay necesidad de configurar el termostato nuevamente luego del reemplazo de las bateras. NOTA: Mientras que no se requieren las bateras en una instalacin cableada, las mismas debern ser instaladas a fin de evitar reconfigurar la hora en el termostato si se produce un corte de energa.

49-5000637 Rev. 0 28

Solucin de Problemas Cdigos de Error

ERR1 - Defecto en el Hardware del Sensor de Temperatura del Termostato

ERR2 - Defecto en el Hardware de la Radio del Termostato

ERR3 - Defecto en el Software de la Radio del Termostato ERR4 - Ningn vnculo con la Tarjeta de Control

Inalmbrico ERR5 - Defecto en la Memoria del Termostato

NOTAS: Para ERR1, ERR2, ERR3, y ERR5, llame al servicio de GE Appliances. (Nmero telefnico ubicado en la seccin de Garanta Limitada en la pgina 32). Para ERR4, reinicie las configuraciones comenzando en la pgina 5.

29 49-5000637 Rev. 0

Solucin de Problemas El termostato no est controlando la unidad HVAC.

Controle que la unidad HVAC est configurada en el modo Termostato Externo (Clase 2). Consulte el Manual del Propietario del Zoneline, configuraciones Auxiliares.

Verifique el estado de la luz roja en la Tarjeta de Control Inalmbrico.

La luz roja est apagada.

La Tarjeta de Control Inalmbrico no est encendida. Verifique que la Tarjeta de Control Inalmbrico est correctamente cableada a la unidad HVAC especficamente, a fin de asegurarse de que el cable ROJO y el NEGRO estn correctamente conectados.

Si la luz roja est parpadeando con un (1) destello

La Tarjeta de Control Inalmbrico est conectada pero no se est comunicando con el termostato; apague y encienda el termostato para reiniciar el procedimiento de vinculacin.

En caso de una Instalacin de Red, vuelva a vincular el termostato y la Tarjeta de Control Inalmbrico con el Programador de Red.

Si la luz roja est parpadeando con tres (3) destellos

La Tarjeta de Control Inalmbrico se est comunicando con el termostato. Verifique que la Tarjeta de Control Inalmbrico est correctamente cableada a la unidad HVAC y que los ajustes del equipamiento del termostato tipo de compresor, calor elctrico y vlvula de inversin estn correctamente configurados.

49-5000637 Rev. 0 30

Solucin de Problemas Comienzo de un Reinicio General

Si hay informes de errores o de problemas de configuracin, el usuario podr realizar un reinicio general del termostato en sus parmetros por omisin.

Procedimiento: Retire la placa frontal del termostato.

Apague el termostato retirando las bateras o cortando la energa del termostato.

Mientras el termostato est apagado, mantenga presionado el botn config (configuracin) ubicado en el tablero de control dentro del termostato.

Reinicie la energa al termostato reinstalando las bateras.

Una vez que las luces de la pantalla estn encendidas, libere el botn config (configuracin).

Si el reinicio general tuvo xito, el termostato exhibir 12:00, indicando que todos los ajustes sern reiniciados al ajuste por omisin y que es necesario que el termostato sea reconfigurado. Por favor, consulte la configuracin del termostato en la pgina 11 del manual.

Si estos problemas no se resuelven, comunquese con el apoyo tcnico de GE Appliances al 1-844-GE4-PTAC option 1 (o al 844- 434-7822).

31 49-5000637 Rev. 0

Especificaciones Tcnicas Termostato Tarjeta de Control Inalmbrico

Dimensiones de la Carcasa (Imperial) 4.015 x 5.5118 x 0.925 3.875 x 2.125 x 0.75 Dimensiones de la Carcasa (Mtrica) 102mm x 140mm x 23.5mm 98mm x 54mm x 19mm Dimensiones de la Pantalla (Imperial) 3.625 x 2.125 N/A Dimensiones de la Pantalla (Mtrica) 92mm x 54mm N/A tensin de funcionamiento 3V DC - 2 AA Cell Batteries

OR(Optional) 24V AC/DC 24V AC/DC

Salidas del Control Ventilador Alto (GH) Ventilador Bajo (GL)

Compresor (Y) Bomba de Calor (OB) Calor Elctrico (W2)

Frecuencia Inalmbrica 900MHz 900MHz Precisin de la Temperatura 1F N/A FCC ID XEYWX XEYV8ACCC

DECLARACIN DE LA FCC Este dispositivo cumple con la Parte 15 de las normativas de la FCC. Su funcionamiento

est sujeto a las dos condiciones siguientes: (1) Este dispositivo no deber causar interferencias nocivas y (2) este dispositivo deber aceptar cualquier interferencia recibida, incluyendo inter- ferencias que puedan generar un funcionamiento no deseado.

De acuerdo con la parte 15.21 de las normativas de la FCC,

aprobados expresamente por GE Appliances podr anular la autoridad del usuario para utilizar el equipamiento.

32 49-5000637 Rev. 0

GARANTA LIMITADA DEL TERMOSTATO

Por el Perodo de: GE Appliances Brindar:

Un Ao Un reemplazo completo del termostato si falla debido Desde la fecha de a un defecto en los materiales o la fabricacin. la compra original

Qu No Cubrir GE Appliances:

su instalador. Usted es responsable de brindar conexiones elctricas adecuadas sobre el producto.

a un uso inadecuado, incluyendo la falta de mantenimiento razonable o necesario.

haya sido inicialmente instalada, a una ubicacin donde se encuentre accesible para el servicio tcnico por parte de un tcnico individual; o, si las instrucciones de este manual fueron ignoradas.

inadecuado, accidentes, incendios, inundaciones o catstrofes naturales.

termostato.

Abroche su recibo aqu. Para validar la garanta deber contar con la prueba de la fecha original de compra.

Esta garanta limitada se extiende al comprador original y a cualquier dueo subsiguiente de productos comprados para uso dentro de EE.UU. y Canad. En Alaska, la garanta limitada excluye el costo de envo o llamadas del servicio a su hogar. Algunos estados o provincias no permiten la exclusin o limitacin de daos fortuitos o consecuentes. Esta garanta limitada le da derechos legales especficos, y es posible que tenga otros derechos que varan entre un estado y otro, o entre una provincia y otra. Para conocer cules son sus derechos legales, consulte a la oficina de asuntos del consumidor local, estatal o provincial o al Fiscal de su estado.

Garante: GE Appliances, Louisville, KY 40225

EXCLUSIN DE GARANTAS IMPLCITASSu nica y exclusiva alternativa es el cambio del producto, como se indica en la Garanta Limitada. Las garantas implcitas, incluyendo garantas implcitas de comerciabilidad o conveniencia sobre un propsito particular, se limitan a un ao o al perodo ms corto permitido por la ley.

Para solicitar ayuda en relacin a la solucin de problemas del termostato, co- munquese al 1-844-GE4-PTAC option 1

Manualsnet FAQs

If you want to find out how the RAK160W2 GE works, you can view and download the GE RAK160W2 Thermostat Installation Instructions on the Manualsnet website.

Yes, we have the Installation Instructions for GE RAK160W2 as well as other GE manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Instructions should include all the details that are needed to use a GE RAK160W2. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the GE RAK160W2 Thermostat Installation Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This GE RAK160W2 Thermostat Installation Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download GE RAK160W2 Thermostat Installation Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print GE RAK160W2 Thermostat Installation Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the GE RAK160W2 Thermostat Installation Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.