GE PIP70SS Panel Installation Instructions PDF

1 of 2
1 of 2

Summary of Content for GE PIP70SS Panel Installation Instructions PDF

Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: In Canada, call 1.800.561.3344 or visit our Website at:

Installing the Door Panel with Handle The panel will be held on by 6 sheet metal screws and 2 machine screws. 1. Remove the gasket from the inside of the door and

retain for later use. 2. Remove any plastic covering the stainless steel panel. 3. Place the door panel onto the outside of the door and

secure it with 2 machine screws in the left center and right center of the door.

4. Fasten the panel to the door using the 6 sheet metal screws. In the hinge opening area opposite the hinge side, use the outermost screw holes only.

5. Place the covers over the hinge opening areas and secure each cover to the door using a sheet metal screw and washer.

6. Insert hole plug over screw installed in step 5. 7. Return the gasket to its original position. 8. Attach the door to the cabinet using the original screws.

31-49096 Rev. 3 02-19 GEA

Gasket Machine Screw

Door Panel

Use UPPER hole at the top

Hole Plug Cover

Use LOWER hole at the bottom

NOTE: If the door swing is going to be changed, please complete prior to installing the door panel per the directions in your Owners Manual.

Installation Instructions Door Panel

WARNING To reduce the risk associated with choking, do not allow children under 3 years of age to have access to small parts during the installation of this product.

Instalacin del Puerta con Manija El panel ser sostenido por 6 tornillos para chapa metlica y 2 tornillos para metal. 1. Retire la junta del interior de la puerta o conserve la misma

para uso posterior. 2. Retire cualquier cobertura plstica que est recubriendo el

panel de acero inoxidable. 3. Coloque el panel de la puerta sobre la parte exterior de la

puerta y asegure el mismo con 2 tornillos para metal en el centro izquierdo y en el centro derecho de la puerta.

4. Ajuste el panel a la puerta usando 6 tornillos para chapa metlica.En el rea de apertura opuesta al lado donde se encuentran las bisagras, use los agujeros para tornillos ms alejados nicamente.

5. Coloque las tapas sobre las reas de apertura de las bisagras y asegure cada tapa a la puerta usando un tornillo para chapa metlica y una arandela

6. Inserte el tapn del orificio sobre el tornillo instalado en el paso 5.

7. Vuelva a colocar la junta en su posicin original. 8. Adhiera la puerta al gabinete usando los tornillos originales.

31-49096 Rev. 3 02-19 GEA

Junta Tornillo para Metal

Panel de la Puerta

Use el agujero SUPERIOR en la parte ms alta

Tapn del Orificio


Use el agujero INFERIOR en la parte ms baja

NOTA: Si se modificar la apertura de la puerta, complete este paso antes de instalar el panel de la puerta. Lea la manual del propietario

Preguntas? Llame a 800.GE.CARES (800.432.2737) o visite nuestro sitio Web en:

Instrucciones de Instalacin Panel de la Puerta


Manualsnet FAQs

If you want to find out how the PIP70SS GE works, you can view and download the GE PIP70SS Panel Installation Instructions on the Manualsnet website.

Yes, we have the Installation Instructions for GE PIP70SS as well as other GE manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Instructions should include all the details that are needed to use a GE PIP70SS. Full manuals and user guide PDFs can be downloaded from

The best way to navigate the GE PIP70SS Panel Installation Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This GE PIP70SS Panel Installation Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download GE PIP70SS Panel Installation Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print GE PIP70SS Panel Installation Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the GE PIP70SS Panel Installation Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.