Contents

GE RAVRG3 Grille Installation Instructions PDF

1 of 4
1 of 4

Summary of Content for GE RAVRG3 Grille Installation Instructions PDF

Parts Included

Materials Needed (Field Supplied Parts)

Installation Instructions for your new

Before you begin - Read these instructions completely and carefully. IMPORTANT OBSERVE ALL GOVERNING CODES AND ORDINANCES. Note to Installer Be sure to leave these instructions with the Consumer. Note to Consumer Keep these instructions with your Owners Manual for future reference.

RAVRG3 Access Panel with return air grille

95303007 31-30823 12-16 GEAGE is a trademark of the General Electric Company. Manufactured under trademark license.

Installation Overview

Frame and sheetrock and access hole to 27 wide and 55 3/4 tall. The bottom of the opening should be at the same level as the floor or subbase that the VAC unit is placed on. The chassis must fit thru this opening. The chassis is 23 1/2 wide and 32 1/4 or 47 tall (consult chassis specifications for actual dimensions).

Return Air Grille/ Access Panel

25 x 20 Filter 5/32 Allen wrench for latch mechanism operation

Return Air Grille/Access Panel with Latch Mechinism (58 Tall x 29 Wide) Mounting Side Bracket Latch Bracket Mounting Screws

Latch Bracket

Mounting Screws

Mounting Bracket

Return Air Grille/ Access Panel

25 x 20 Nom. Filter (field supplied) Filter mounts on the inside of Access Panel Door

Filte r

Left Mounting Side BracketLatch

Mechanism

2

Installation Instructions

STEP 1 Mounting the Hinge Bracket Mount the hinge to the left side of the wall opening. The Side Bracket must be plumb (vertical).

Secure with four #8 x 1 1/4 pan head screws.

NOTE: Hinge tabs must point upward.

STEP 3 Close the door. Draw a temporary horizontal reference line on the wall adjacent to the center of the latch mounting hole.

STEP 5 Installing the Latch Bracket Slide the bracket upward and tighten the mounting screws.

STEP 4 Latch Bracket Installation Attach the Latch Bracket to the opening.

Align the bottom of the bracket with the reference line.

Use 2 #18 x 1 1/4 screws.

DO NOT OVERTIGHTEN.

STEP 6 Adjust the Latch NOTE: The latch mechanism is factory mounted.

The latch arm is adjustable to provided secure, rattle-free installation. Install the filter.

1. Loosen the latch arm nuts and latch arm and adjust as needed.

2. Tighten the latch arm nuts.

3. Install the filter on back of acess panel.

Draw Reference Line on Wall

Latch mounting hole in door

Reference Line

Access Panel

Latch Arm

Latch Mechanism

SIDE VIEW

FRONT VIEW

Orientation Markings

STEP 2 Mounting the Door on the Side Bracket Install the door onto the Side Bracket.

Be sure that the access door had engaged the three tabs and the door is against the side mounting bracket.

Printed in the United States.

Pices incluses

Matriel ncessaire (pices achetes localement)

Instructions dinstallation de votre nouveau panneau daccs avec grille de retour dair pannea

Avant de commencer Lisez ces instructions attentivement et en totalit. IMPORTANT OBSERVEZ TOUS LES CODES ET RGLEMENTS EN VIGUEUR. Remarque pour linstallateur Assurez-vous de remettre ces instructions au consommateur. Remarque pour le consommateur Conservez ces instructions avec votre manuel dutilisation pour rfrence ultrieure.

.

RAVRG3

95303007 31-30823 12-16 GEAGE est une marque de commerce de General Electric Company. Fabriqu sous licence de marque.

Vue densemble de linstallation

Le cadre, la plaque de pltre et louverture daccs mesurent 27 x 55 po (larg. X long.). Le bas de louverture doit tre de mme niveau que le plancher ou le socle sur lequel repose lappareil. La carrosserie doit passer dans louverture. La carrosserie mesure 23 po x [32 1/4 ou 47 po] (larg. x long.) (Voyez les spcifications de la carrosserie pour les dimensions exactes).

Grille de retour dair/ panneau daccs

Filtre 25 x 20 po Cl Allen 5/32 po pour utiliser le verrou

Grille de retour dair/panneau daccs avec support de verrou 58 x 29 po (long. x larg.) Support de montage latral Support de verrou Vis de montage

Support de verrou

Vis de montage

Support de montage

Grille de retour dair/panneau daccs

Filtre 25 x 20 po (achet localement) Le filtre se monte sur lintrieur de la porte du panneau daccs

Filtre

Support de montage latral (gauche)

Mcanisme du verrou

2

Instructions dinstallation

TAPE 1 Montage du support de charnire Monter la charnire du ct gauche de louverture murale. Le support latral doit tre plomb la verticale.

Fixez laide de quatre vis tte cylindrique bombe #8 x 1 po.

REMARQUE: Les languette de charnire doivent pointer vers le haut.

TAPE 3 Fermez la porte. Tracez une ligne de rfrence horizontale temporaire sur le mur adjacent au centre du trou de montage du verrou.

TAPE 5 Installation du support de verrou Glissez le support vers le haut et serrez les supports de montage.

TAPE 4 Installation du support de verrou Immobilisez le support de verrou dans le trou.

Alignez le bas du support sur la ligne de rfrence.

Utilisez deux vis #18 x 1 1/4.

NE SERREZ PAS EXCESSIVEMENT.

TAPE 6 Ajustement verrou REMARQUE: Le mcanisme du verrou est assembl lusine.

Le bras du verrou est ajustable pour une installation sre et silencieuse. Installez le filtre.

1. Desserrez les crous du bras du verrou et ajustez le bras selon le besoin.

2. Resserrez les crous du bras du verrou.

3. Installez le filtre sur larrire du panneau daccs.

Tracer une ligne de rfrence sur le mur

Trou de montage du verrou dans la porte

Ligne de rfrence

Panneau daccs

Bras du verrou

Mcanisme du verrou

VUE LATRALE

VUE FRONTALE

Marques dorientation

TAPE 2 Montage de la porte sur le support latral Installez la porte

Manualsnet FAQs

If you want to find out how the RAVRG3 GE works, you can view and download the GE RAVRG3 Grille Installation Instructions on the Manualsnet website.

Yes, we have the Installation Instructions for GE RAVRG3 as well as other GE manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Instructions should include all the details that are needed to use a GE RAVRG3. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the GE RAVRG3 Grille Installation Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This GE RAVRG3 Grille Installation Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download GE RAVRG3 Grille Installation Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print GE RAVRG3 Grille Installation Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the GE RAVRG3 Grille Installation Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.