GE RAVAL3 Grille Installation Instructions PDF

1 of 8
1 of 8

Summary of Content for GE RAVAL3 Grille Installation Instructions PDF

Parts Included Grille with 4 factory installed mounting screws

Materials Needed (Field Supplied Parts) Wall Plenum Kit RAVWPT15 (sold separately)

Installation Instructions for your new

Before you begin - Read these instructions completely and carefully. IMPORTANT OBSERVE ALL GOVERNING CODES AND ORDINANCES. Note to Installer Be sure to leave these instructions with the end user. Note to End User Keep these instructions with your Owners Manual for future reference.

RAVAL3 Grille

GE is a trademark of the General Electric Company. Manufactured under trademark license.

Grille

Factory Installed Screws

Grille installation is easier if installed at the same time the plenum is installed through the building wall. Refer to the plenum installation instructions for kit RAVWPT15 for proper Plenum installation procedures.

Weather Cover Remove and discard the weather cover on the wall plenum before installing this grille.

31-5000507 Rev. 0 07-20 GEA

Installation Overview

Unit

RAVDPLAT

Part B Inside Wall Plenum

Part A Outside Wall Plenum

Properly sized header is required for structural support. Proper caulking and flashing are required

NOTE: The plenum has a wax cardboard weather cover. Do not remove this cover until ready to install the grille (RAVAL3)

Exterior/ Outside Wall

RAVAL3

2

Installation Instructions

Printed in China

STEP 1 Installation of the Grille on the Outside Plenum PRIOR TO Wall Plenum Installation (not included) NOTE: The Grille is best installed onto the Outside Plenum (Part A of prior diagram) prior to the wall plenum being installed in the building. Grille installation is easiest at this point, and it will help keep the wall plenum square during installation.

Loosen the 4 mounting screws but do not remove. With the louvers pointed downward and outside, insert the screw heads through the keyhole slots on the flange of the outdoor plenum. Tighten the screws to secure the grille to the plenum.

If the grille is not being installed at this time, be sure the plenum is square when it is secured to the outside wall of the building.

NOTE: Refer to instructions included in the Wall Plenum Kit RAVWPT15 for proper installation procedure.

Alternate Step 1 Installation of the Grille on the Outside Plenum AFTER Wall Plenum Installation

CAUTION For safety, tie a rope or tether to the grille, then to the baffle in the plenum. This will prevent the louver from falling from the building if it is dropped. 1. Loosen the 4 mounting screws but do not remove. 2. Firmly grasp the grille, turn it sideways and insert the top

through the lower opening of the plenum.

3. With the louvers pointing downward, pull the grille back against the Outside Wall Plenum sliding the heads of the screws through the keyhole slots on the Outside Wall Plenum.

4. Tighten all 4 screws to secure the grille to the plenum. 5. When the grille is secure, remove the safety rope or tether.

Attach grille with 4 screws

Side View

RAVWPT15 RAVWPT15

RAVAL3

RAVAL3

Unit

RAVDPLAT

Part B Inside Wall Plenum

Part A Outside Wall Plenum

Properly sized header is required for structural support. Proper caulking and flashing are required

NOTE: The plenum has a wax cardboard weather cover. Do not remove this cover until ready to install the grille (RAVAL3)

Exterior/ Outside Wall

Pices comprises Grille avec 4 vis de montage installes en usine

Matriel ncessaire (pices fournies sur le terrain) Ensemble de plnum mural du RAVWPT15 (vendu sparment)

Instructions dinstallation pour votre nouvelle grille

Avant de commencer - Lisez ces instructions attentivement et en entier. IMPORTANT RESPECTEZ TOUS LES CODES ET RGLEMENTS APPLICABLES. Remarque lintention de linstallateur - Assurez-vous de remettre ces instructions au utilisateur final. Remarque utilisateur final Conservez ces instructions avec le manuel du propritaire afin de pouvoir sy reporter ultrieurement.

RAVAL3

GE est une marque de commerce de General Electric Company. Fabriqu sous licence de marque de commerce.

Linstallation de la grille est plus facile si elle est ralise en mme temps que celle du plnum dans le mur du btiment. Pour sassurer quil sagit des procdures dinstallation du plnum adquates, se reporter aux instructions dinstallation du plnum pour les ensemble RAVWPT15.

Capot protecteur Retirez et jetez le capot protecteur du plnum mural avant dinstaller cette grille.

31-5000507 Rev. 0 07-20 GEA

Aperu de linstallation REMARQUE: le plnum dispose dun capot protecteur en carton cir. Ne retirez pas ce capot jusqu ce que vous soyez prt installer la grille. (RAVAL3)

Il est ncessaire de disposer dun linteau dune taille appropri pour le support structurel. Un matriau de calfeutrement et un solin adquats sont ncessaires.

Unit

Partie Plnum mural extrieur

Mur xtrieur

Partie B Plnum mural intrieur

RAVAL3

Grille

Vis installes en usine

2

Instructions dinstallation

Imprim aux China

TAPE 1 Installation de la grille sur le plnum extrieur AVANT linstallation du plnum mural (non compris) REMARQUE: il est prfrable dinstaller la grille sur le plnum extrieur (partie du schma prcdent) avant de poser le plnum mural dans le btiment. Il est alors plus facile de procder linstallation de la grille et le plnum mural restera lquerre pendant linstallation. Dvissez les quatre (4) vis de montage, sans les retirer. Avec les persiennes diriges vers lavant et lextrieur, insrez les ttes de vis dans les fentes piriformes situes sur la collerette dencastrement du plnum extrieur. Serrez fermement les vis de la grille contre la collerette dencastrement. Si vous navez pas encore install la grille ce moment, assurez-vous que le plnum est lquerre lorsque vous le fixerez au mur extrieur du btiment.

REMARQUE: reportez-vous aux instructions comprises dans lensemble de plnum mural RAVWPT15 pour connatre la procdure dinstallation adquate.

tape alternative 1 Installation de la grille sur le plnum extrieur APRS linstallation du plnum mural

ATTENTION Pour des raisons de scurit, attachez une corde ou une sangle la grille, puis au dflecteur dans le plnum. Ceci empchera le registre de tomber du btiment si vous lchappez. 1. Dvissez les quatre (4) vis de montage, sans les retirer. 2. Tenez fermement la grille, tournez-la sur le ct et insrez le

haut dans louverture infrieure du plnum.

3. Avec les persiennes diriges vers lavant, tirez la grille contre le plnum mural extrieur en glissant les ttes de vis dans les fentes piriformes du plnum mural extrieur.

4. Serrez les quatre vis et fixez la grille au plnum. 5. Une fois la grille fixe, retirez la corde ou la sangle de

scurit.

Fixer la grille avec quatre vis

Vue latrale

RAVWPT15 RAVWPT15

RAVAL3

RAVAL3

3

Notes

4

Notes

Piezas Incluidas Rejilla con 4 tornillos de montaje instalados de fbrica

Materiales Necesarios (Piezas Especficas Suministradas) Kit del Plnum de Pared RAVWPT15 (se vende por separado)

Instrucciones de Instalacin de su nueva Rejilla

Antes de comenzar Lea estas instrucciones completamente y de forma detenida. IMPORTANTE - CUMPLA CON TODOS LOS CDIGOS Y ORDENANZAS GUBERNAMENTALES. Nota para el Instalador Asegrese de entregar estas instrucciones al usuario final. Nota para el usuario final Guarde estas instrucciones con su Manual del Propietario para referencia futura.

RAVAL3

GE Appliances es una marca registrada de la Empresa General Electric. Fabricado bajo licencia de la marca registrada.

La instalacin de la rejilla es ms fcil si es realizada conjuntamente con la instalacin del plnum, a travs de la pared de la edificacin. Consulte las instrucciones de instalacin de los kits de plnum RAVWPT15 para conocer los procedimientos de instalacin adecuados del mismo.

Protector Climtico Antes de instalar la rejilla, retire y descarte el protector climtico sobre el plnum de pared.

31-5000507 Rev. 0 07-20 GEA

Descripcin General de la Instalacin

Unit

RAVDPLAT

Part B Inside Wall Plenum

Part A Outside Wall Plenum

Properly sized header is required for structural support. Proper caulking and flashing are required

NOTE: The plenum has a wax cardboard weather cover. Do not remove this cover until ready to install the grille (RAVAL3)

Exterior/ Outside Wall

NOTA: El plnum (que se vende por separado) cuenta con un protector climtico de cartn encerado. No retire este protector hasta que est preparado para instalar la rejilla.

Unidad

Pieza B Plnum de Pared Interna

Exterior/ Pared Externa

Pieza A Plnum de Pared Exterior

RAVAL3

Se requiere una viga del tamao adecuado para el soporte de la estructura. Se requiere una lmina y sellador adecuados.

Rejilla

Tornillos Instalados de Fbrica

2

Instrucciones de Instalacin

Impreso en China

PASO 1 Instalacin de la Rejilla en el Plnum Externo ANTES de la Instalacin del Plnum de Pared (no incluido) NOTA: La instalacin la Rejilla es ms conveniente en el Plnum Externo (Pieza A del diagrama anterior), antes de la instalacin del plnum de pared en la edificacin. La instalacin de la rejilla es ms fcil en este punto, y ayudar a mantener el plnum de pared encuadrado durante la instalacin. Afloje los 4 tornillos de montaje pero no los retire. Con las celosas apuntando hacia abajo y afuera, inserte las cabezas de los tornillos a travs de las ranuras con forma de cerradura sobre la brida del plnum exterior. Ajuste los tornillos a fin de asegurar la rejilla al plnum. Si no se instalar la rejilla en esta oportunidad, asegrese de que el plnum est en ngulo recto cuando se ajuste a la pared exterior de la edificacin. NOTA: Consulte las instrucciones incluidas en el Kit del Plnum de Pared RAVWPT15 para conocer el procedimiento de instalacin adecuado.

Paso 1 Alternativo Instalacin de la Rejilla en el Plnum Externo LUEGO de la Instalacin del Plnum de Pared

PRECAUCIN Para su seguridad, ate una soga o correa a la rejilla, y luego al deflector del plnum. Esto evitar que el listn caiga de la edificacin si se desprende. 1. Afloje los 4 tornillos de montaje pero no los retire. 2. De manera firme, tome la rejilla, gire la misma hacia los

costados e inserte la parte superior a travs de la abertura inferior del plnum.

3. Con las celosas apuntando hacia abajo, empuje la rejilla hacia atrs contra el Plnum de Pared Exterior deslizando las cabezas de los tornillos a travs de las ranuras con forma de cerradura sobre el Plnum de Pared Exterior.

4. Ajuste los 4 tornillos para asegurar la rejilla al plnum. 5. Una vez asegurada la rejilla, retire la soga o correa de

Manualsnet FAQs

If you want to find out how the RAVAL3 GE works, you can view and download the GE RAVAL3 Grille Installation Instructions on the Manualsnet website.

Yes, we have the Installation Instructions for GE RAVAL3 as well as other GE manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Instructions should include all the details that are needed to use a GE RAVAL3. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the GE RAVAL3 Grille Installation Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This GE RAVAL3 Grille Installation Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download GE RAVAL3 Grille Installation Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print GE RAVAL3 Grille Installation Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the GE RAVAL3 Grille Installation Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.