GE RAG60 Grille Installation Instructions PDF

1 of 2
1 of 2

Summary of Content for GE RAG60 Grille Installation Instructions PDF

31-5000484 Rev. 0 01-20 GEA

Installation Instructions for your new

Before you begin - Read these instructions completely and carefully. IMPORTANT OBSERVE ALL GOVERNING CODES AND ORDINANCES. Note to Installer Be sure to leave these instructions with the Consumer. Note to Consumer Keep these instructions with your Owners Manual for future reference.

RAG60 Zoneline Case Rear Grille

Tools Needed 1/4 Nutdriver

To Install the Case Rear Grille 1. Remove the case stiffener. Remove the rear

(outside) panel from inside the case and bring the panel through the case into the room. (To prevent dropping panel, use slit in the outdoor panel as a hand hold and push out.)

2. Using the ribbon handle on the grille, place the grille assembly completely through the case from the room side. Then pull the grille back toward the rear of case inserting (4) screws partially installed in grille into the key hole slots on rear of case. While holding grille assembly in place with one hand, tighten the (4) screws. Then install (2) additional screws packed in bag assembly into center holes located at top and bottom of case.

Ribbon Handle


Room side Wall

To Install the Case Rear Grille (cont.) NOTE: When installing new grille onto a case without the key hole slots, it will be necessary to remove the (4) screws partially driven into grille and then reinstall screws after grille is carefully positioned on rear of case.

3. Remove the ribbon handle from the grille.

The case is now ready for the installation of the chassis. (For installation of the chassis and appearance front, refer to the instruction packed with the chassis.)

NOTE: If the chassis is not to be installed immediately, the case stiffener should be reinstalled.

31-5000484 Rev. 0 01-20 GEA

Instructions dinstallation pour votre nouvelle

Avant de commencer Lire attentivement ces instructions dans leur intgralit. IMPORTANT OBSERVER TOUTES LES RGLEMENTATIONS ET ORDONNANCES EN VIGUEUR. Remarque pour linstallateur Sassurer de laisser ces instructions au client. Remarque pour le consommateur Garder ces instructions avec le manuel utilisateur pour rfrence ultrieure

RAG60 Grille arrire du coffret Zoneline

Outils ncessaires Tournevis douille 1/4 po

Pour installer la grille arrire du botier 1. Dposer le raidisseur de coffret. Dposer le panneau

arrire (extrieur) de lintrieur du coffret et amener le panneau par le coffret dans la pice. Pour viter de faire tomber le panneau, passer la main dans la fente du panneau extrieur et pousser.)

2. En prenant la poigne de ruban sur la grille, passer la grille compltement au travers du coffret du ct pice. Puis ramener la grille vers larrire du coffret en insrant (4) vis partiellement installes dans la grille dans les encoches en trou de serrure larrire du coffret. Tout en tenant la grille en place dune main, serrer les (4) vis. Puis installer (2) vis supplmentaires emballes dans le sac dans les trous centraux en haut et en bas du coffret.

poigne de ruban


Mur ct pice

Pour installer la grille arrire du botier REMARQUE : Lors de linstallation de la nouvelle grille sur un coffret sans encoche en trou de serrure, il est ncessaire de retirer les (4) vis partiellement visses dans la grille et de remettre les vis en place une fois la grille soigneusement positionne sur larrire du coffret.

3. Dposer la poigne de ruban d

Manualsnet FAQs

If you want to find out how the RAG60 GE works, you can view and download the GE RAG60 Grille Installation Instructions on the Manualsnet website.

Yes, we have the Installation Instructions for GE RAG60 as well as other GE manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Instructions should include all the details that are needed to use a GE RAG60. Full manuals and user guide PDFs can be downloaded from

The best way to navigate the GE RAG60 Grille Installation Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This GE RAG60 Grille Installation Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download GE RAG60 Grille Installation Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print GE RAG60 Grille Installation Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the GE RAG60 Grille Installation Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.