GE RAK13 Filter Kit Installation Instructions PDF

1 of 4
1 of 4

Summary of Content for GE RAK13 Filter Kit Installation Instructions PDF

PROCEDURE FOR INSTALLING FILTER KIT 1. Ensure power is not connected to Zoneline. 2. Insert filter housing into the far side slot of the

make-up air module.

3. Compress the filter housing by pressing on its opposite end causing the filter housing to bend (be careful not to apply too much pressure).

4. While in the compressed state, insert the other end of the filter housing into the opening of the make-up air module.

5. Release the grip on the filter housing and let it expand back to its original shape while guiding the other end of the housing into the near side slot of the make-up air module.

6. Both ends of the filter housing should now be located within both slots of the make-up module.

31-5000405 Rev. 0 05-19 GEA

WARNING For your safety, the information in these instructions must be followed to minimize the risk of electric shock, property damage, personal injury, or loss of life. Unplug or disconnect the Zoneline at the fuse box or circuit breaker prior to working on product.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

Installation Instructions Zoneline Make-Up Air Module MERV 13 filter housing kit (includes 1 filter): : RAK13 Replacement MERV 13 Filter Kit: RAA13

Before you begin - Read these instructions completely and carefully. IMPORTANT OBSERVE ALL GOVERNING CODES AND ORDINANCES. Note to Installer Be sure to leave these instructions with the Consumer. Note to Consumer Keep these instructions with your Owners Manual for future reference.

Installation Instructions: Filter Kit

PROCEDURE FOR INSTALLING FILTER KIT 7. Looking at the tag on the air filter, orientate the

filter so the airflow is in the correct direction into the make-up air module.

8. Insert the filter into the filter housing, adjust the filter as needed to ensure it is taking up the entire cavity of the filter housing.

9. Place the airflow label, as seen on the second page, on the fan shroud across from the make-up air module.

10. REPLACE THE AIR FILTER WITHIN EVERY 90 DAYS IN ORDER TO AVOID VOIDING WARRANTY. In areas where outside air quality is lower, the air filter may need to be changed more frequently.

Far Side Slot

Filter housing Inserted into Near Side Slot

Filter Filter housing Filter Filter housing

2

Installation Instructions: Adjusting Make-Up Air Module Fan Speeds/Airflow

ADJUSTING MAKE-UP AIR MODULE FAN SPEEDS/AIRFLOW 1. After installing the filter, the Zoneline into the wall

sleeve, and re-energizing, the airflow of the make-up air module can be adjusted through the Aux settings.

2. With the front panel of the Zoneline off, press the red AUX SET button located behind the room cabinet, below the user interface.

3. AU appears on the display. Press the MODE button on the user interface until a double numerical digit starting with 0 shows up (should be either 00, 01, 02, 03, 04, 05, 06).

4. Using the Supplementary Airflow graph below, choose a speed setting by pressing the up (+) or down (-) buttons to select one of the settings; 00-06.

5. Press the red AUX SET button again to save the selection, which will cause the make-up air module to reset and go through its startup procedure.

6. Replace the front cover of the Zoneline.

Red AUX Set Button

-0.1

-0.08

-0.06

-0.04

-0.02

0 0 5 10 15 20 25 30 35 40 45 50

P (in

H 2 O)

Volumetric Flow Rate (CFM)

Supplementary Air ow - RAA13 Air Filter Make-up Air Module Fan Speed Se ng (Aux 0_)

1 2 3 4 5 6

Make-up Air Module Filter Airflow Information

Data below is when module is equipped with the RAA13 1 MERV13 filter at 0.0 in. H2O static pressure

6

4 3

1 2

5 28

21 18

12 15

25

Make-up Air Module Fan Speed Setting

(Aux 0_) Design Airflow Rate (cfm)

See supplementary airflow graph on increasing airflow rates

Air Filter Max Allowable Clean Filter Pressure Drop: 0.1 in. H20

Instructions dinstallation Module dair dappoint Zoneline MERV 13, kit filtre (comprend 1 filtre): RAK13

Kit de filtre de rechange MERV 13: RAA13

Avant de commencer Lisez ces instructions attentivement et en totalit. IMPORTANT OBSERVEZ TOUS LES CODES ET RGLEMENTS EN VIGUEUR. Remarque linstallateur Assurez-vous de remettre ces instructions au consommateur. Remarque au consommateur Conservez ces instructions avec le manuel dutilisation pour consultation ultrieure.

AVERTISSEMENT Pour votre scurit, vous devez suivre ces instructions afin de minimiser le risque de dcharge lectrique, de dommage la proprit, de blessure ou de perte en vie humaine. Dbranchez ou dconnectez le Zoneline la bote de fusibles ou au disjoncteur avant de travailler avec ce produit.

Instructions dinstallation: Trousse de filtre air

31-5000405 Rev. 0 05-19 GEA

PROCDURE POUR INSTALLER LA TROUSSE DE FILTRE AIR 1. Assurez-vous de couper lalimentation lectrique au

Zoneline.

2. Insrez le botier du filtre dans la fente du ct loign du module dair dappoint

3. Comprimez le botier du filtre en pressant sur son extrmit oppose pour courber le botier (veillez ne pas appliquer une pression excessive).

4. Dans son tat comprim, insrez lautre extrmit du botier du filtre dans louverture du module dair dappoint.

5. Relchez la pression sur le botier et laissez-le reprendre sa forme initiale tout en guidant lautre extrmit dans la fente du ct le plus proche du module dair dappoint.

6. Les deux extrmits du botier du filtre doivent maintenant tre situes dans les deux fentes du module dair dappoint.

Fente du ct loign

insr dans la fente du ct le plus proche

PROCDURE POUR INSTALLER LA TROUSSE DE FILTRE 7. En regardant ltiquette sur le filtre air, orientez le

filtre de faon que le dbit dair se dirige dans la bonne direction dans le module dair dappoint.

8. Insrez le filtre dans son botier, ajustez le filtre au besoin afin quil remplisse toute la cavit du botier de filtre.

9. Placez ltiquette du dbit dair (illustre sur cette page) sur le capot de ventilateur de lautre ct du module dair dappoint.

10. REMPLACEZ LE FILTRE AIR TOUS LES 90JOURS OU MOINS POUR VITER DANNULER LA GARANTIE.Dans les rgions o lair extrieur est de moindre qualit, il faut changer le filtre air plus frquemment.

Placer ltiquette du dbit dair ici

2

Instructions dinstallation Rglage de la vitesse ou du dbit dair du ventilateur

du module dair dappoint

RGLAGE DE LA VITESSE OU DU DBIT DAIR DU VENTILATEUR DU MODULE DAIR DAPPOINT 1. Aprs linstallation du filtre, du Zoneline dans sa gaine

murale, et la remise sous tension, le dbit dair du module dair dappoint peut tre modifi par les rglages Aux.

2. Avec le panneau frontal du Zoneline teint, pressez le bouton rouge AUX SET situ derrire la carrosserie, en dessous de linterface utilisateur.

3. Les lettres AU apparaissent sur lafficheur. Pressez le bouton MODE sur linterface utilisateur jusqu ce quun nombre de deux chiffres dbutant par 0 saffiche (00, 01, 02, 03, 04, 05 ou 06).

4. laide du graphique Dbit dair supplmentaire ci-dessous, choisissez une vitesse laide des boutons haut (+) ou bas (-) pour slectionner un des rglages; 00 06.

5. Pressez le bouton rouge AUX SET de nouveau pour sauvegarder la slection, ce qui rinitialisera le module dair dappoint et lancera la procdure de dmarrage.

6. Replacez le couvercle frontal du Zoneline.

Bouton rouge AUX SET

-0.1

-0.08

-0.06

-0.04

-0.02

0 0 5 10 15 20 25 30 35 40 45 50

P (in

H 2 O)

Volumetric Flow Rate (CFM)

Supplementary Air ow - RAA13 Air Filter Make-up Air Module Fan Speed Se ng (Aux 0_)

1 2 3 4 5 6

Make-up Air Module Filter Airflow Information

Data below is when module is equipped with the RAA13 1 MERV13 filter at 0.0 in. H2O static pressure

6

4 3

1 2

5 28

21 18

12 15

25

Make-up Air Module Fan Speed Setting

(A

Manualsnet FAQs

If you want to find out how the RAK13 GE works, you can view and download the GE RAK13 Filter Kit Installation Instructions on the Manualsnet website.

Yes, we have the Installation Instructions for GE RAK13 as well as other GE manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Instructions should include all the details that are needed to use a GE RAK13. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the GE RAK13 Filter Kit Installation Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This GE RAK13 Filter Kit Installation Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download GE RAK13 Filter Kit Installation Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print GE RAK13 Filter Kit Installation Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the GE RAK13 Filter Kit Installation Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.