GE PTW9000 PTW9000SNSS Drawer Owner's Manual PDF

1 of 40
1 of 40

Summary of Content for GE PTW9000 PTW9000SNSS Drawer Owner's Manual PDF

Write the model and serial numbers here:

Model # _________________

Serial # _________________

You can find them on a label located on the backside of the lower drawer front.

ESPAOL Para consultar una version en

espaol de este manual de instrucciones, visite nuestro sitio de

internet GEAppliances.com.

49-2000768 Rev. 1 01-21

PKW7000 PTW9000

OWNERS MANUAL & INSTALLATION INSTRUCTIONS

W A

R M

IN G

D R

A W

ER E

le ct

ri c SAFETY INFORMATION . . . . . . . . . . . . 3

USING THE WARMING DRAWER Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Operating Tips . . . . . . . . . . . . . . . . . . . . . . . . . . 6

CARE AND CLEANING Cleaning The Warming Drawer . . . . . . . . . . . . 9

INSTALLATION INSTRUCTIONS . 10

TROUBLESHOOTING TIPS . . . . . . . . .16

LIMITED WARRANTY . . . . . . . . . . . . . .17

ACCESSORIES . . . . . . . . . . . . . . . . . . . . . .19

CONSUMER SUPPORT . . . . . . . . . . . . 20

2 49-2000768 Rev. 1

THANK YOU FOR MAKING GE APPLIANCES A PART OF YOUR HOME.

Whether you grew up with GE Appliances, or this is your first, were happy to have you in the family.

We take pride in the craftsmanship, innovation and design that goes into every GE Appliances product, and we think you will too. Among other things, registration of your appliance ensures that we

can deliver important product information and warranty details when you need them.

Register your GE appliance now online. Helpful websites and phone numbers are available in the Consumer Support section of this Owners Manual. You may also mail in the pre-printed registration

card included in the packing material.

49-2000768 Rev. 1 3

SA FETY IN

FO R

M A

TIO N

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE WARNING Read all safety instructions before using the product. Failure to follow these instructions may result

in fire, electrical shock, serious injury or death.

WARNING IMPORTANT SAFETY NOTICE All warming drawers can tip and injury could result if not properly installed. To prevent accidental tipping of the warming drawer, attach it to the wall with an anti-tip brace as described in the Installation Instructions.

WARNING GENERAL SAFETY INSTRUCTIONS

described in this Owners Manual.

grounded by a qualified installer in accordance with the provided installation instructions.

of your warming drawer unless it is specifically recommended in this manual. All other servicing should be transferred to a qualified technician.

power supply at the household distribution panel by removing the fuse or switching off the circuit breaker.

be left alone or unattended in an area where an appliance is in use. They should never be allowed to climb, sit or stand on any part of the appliance.

CAUTION to children in cabinets above a warming drawer - children climbing on the warming drawer to reach items could be seriously injured.

holders on hot surfaces may result in burns from

place of pot holders.

the room.

surface of the warming drawer. These surfaces may be hot enough to burn even though they are

or let clothing or other flammable materials contact any interior area of the warming drawer; allow sufficient time for cooling first. Other surfaces of the appliance may become hot enough to cause burns. Potentially hot surfaces include the warming drawer vent opening, surfaces near the opening and crevices around the warming drawer door.

could build up and the container could burst, causing an injury.

bottom. Foil can trap heat or melt, resulting in damage to the product and a shock or fire hazard.

not cook on a product with broken glass. Shock, fire or cuts may occur.

hot cooked foods at serving temperature (greater

is below 140F. Therefore, always start with hot food; cold food cannot be heated or cooked in the warming drawer.

4 49-2000768 Rev. 1

SA FE

TY IN

FO R

M A

TI O

N

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

WARNING KEEP FLAMMABLE MATERIALS AWAY FROM THE WARMING DRAWER Failure to do so may result in fire or personal injury.

a warming drawer, including paper, plastic, pot holders, linens, wall coverings, curtains, drapes and gasoline or other flammable vapors and liquids.

using the appliance. These garments may ignite if they contact hot surfaces, causing severe burns.

materials accumulate in or near the warming drawer. Grease in the warming drawer or near the warming drawer may ignite.

WARNING IN THE EVENT OF A FIRE, TAKE THE FOLLOWING STEPS TO PREVENT INJURY AND FIRE SPREADING

flaming pan. fire by closing the warming drawer door and turning the warming drawer off or by using a multi-purpose dry chemical or foam-type fire extinguisher.

WARNING WARMING DRAWER SAFETY INSTRUCTIONS

the warming drawer door. Hot air or steam which escapes can cause burns to hands, face and/or eyes.

Grease in the warming drawer may ignite

warming drawer is cool. If rack must be moved while warming drawer is hot, do not let pot holder contact hot heating element in warming drawer.

or food in the warming drawer when not in use. Items stored in a warming drawer can ignite.

How to Remove Protective Shipping Film and Packaging Tape Carefully grasp a corner of the protective shipping film with your fingers and slowly peel it from the appliance

Remove all of the film before using the appliance for the first time.

To assure no damage is done to the finish of the product, the safest way to remove the adhesive from packaging tape on new appliances is an application of a household liquid dishwashing detergent. Apply with a soft cloth and allow to soak. NOTE: The adhesive must be removed from all parts. It cannot be removed if it is baked on.

49-2000768 Rev. 1 5

Features U

SIN G

TH E W

A R

M IN

G D

R AW

ER : Features

heat cold food other than proofing yeast dough, crisping crackers, chips or dry cereal.

Control Knob The warming drawer controls are hidden with the drawer shut. Open the drawer. The controls are on the right side of the front frame. To use the warming drawer, press the ON/OFF Slide the moisture selector control to the open or closed setting (See the Moisture Selector section).

Turn the control knob to the desired setting.

ON Signal Light

the OFF position.

the drawer front panel when the drawer is closed. This is a reminder that the heat is on.

Moisture Selector The moisture selector is located on the inside front of the drawer. To keep foods moist, slide the moisture selector control away from the control knob. This closes the vent and seals the moisture inside the drawer. With the vent closed hot foods stay moist and soft. In this setting condensation may occur around the inside edge of the drawer.

To keep foods crisp, slide the moisture selector control to the right towards the control knob. This opens the vents and allows the moisture to escape. With the vents open, it is normal for moisture to collect on surfaces above the warming drawer.

PROOF . . . . . . . . . . . . 7595F

LOW . . . . . . . . . . . . . . 140160F

MED . . . . . . . . . . . . . . . 160195F

HIGH . . . . . . . . . . . . . . 195230F

Rating Plate

Moisture Selector (on back of panel)

HIGH

PROOF

MED

LOW

MoistClosedVent CrispOpenVent

6 49-2000768 Rev. 1

Operating Tips Rack

U SI

N G

T H

E W

A R

M IN

G D

R AW

ER : O

pe ra

tin g

Ti ps

When Using The Warming Drawer

LOW 8 minutes MED 15 minutes HIGH 20 minutes NOTE: It is not necessary to preheat the drawer for proofing. Food in heat-safe glass and glass ceramic pans may need higher thermostat setting as compared to food in metal pans.

to escape and the food to cool. Allow extra time for temperature inside the drawer to stabilize after adding items.

thermostat setting and cover some of the cooked food items.

transferred to a heat-safe serving dish.

from drying out.

CAUTION Plastic containers or plastic wrap will melt if in direct contact with the drawer. Melted plastic may not be removable and is not covered under your warranty.

containers in warming drawer.

To Warm Serving Bowl And Plates

bottom of the drawer. If you want hotter dishes or want to heat fine china, please check with the manufacturer of the dishes for their maximum heat tolerance.

serving dishes at the same time, place the serving dishes on the high rack position and the food on the bottom of the drawer.

CAUTION mitts when removing hot dishes.

49-2000768 Rev. 1 7

Operating Tips To Proof Yeast Bread Dough Yeast dough can be proofed in the warming drawer.

LOW then immediately back to PROOF.

to double the dough size. Cover with a cloth.

needed. The dough should remain in the drawer until it has doubled in size and a slight depression remains when the surface is touched gently with a finger.

U SIN

G TH

E W A

R M

IN G

D R

AW ER

: O perating Tips

CrispOpenVent

To Crisp Stale Items

needed.

Temperature Selection Chart for Crisp Foods To keep several different foods hot, set the temperature to the food needing the highest setting. Place the items needing the highest setting on the bottom of the drawer and items needing less heat on the rack.

Tips:

MoistClosedVent

Food Type Control Setting Moisture

Selector Setting HIGH

Fried foods HIGH

Pies, two crusts

Pizza HIGH

Potatoes, baked HIGH

Tortilla Chips

8 49-2000768 Rev. 1

MoistClosedVent

Operating Tips Temperature Selection Chart for Moist Foods To keep several different foods hot, set the temperature to the food needing the highest setting. Place the items needing the highest setting on the bottom of the drawer and items needing less heat on the rack.

Tips:

U SI

N G

T H

E W

A R

M IN

G D

R AW

ER : O

pe ra

tin g

Ti ps

temperatures.

Food Type Control Setting Moisture

Selector Setting

well done*

Casseroles

Cooked cereal

Eggs

Fish, seafood

Fruit

Gravy, cream sauces

Ham

Pancakes, waffles HIGH

Pies, one crust

Pork

Potatoes, mashed

Poultry HIGH

Vegetables

49-2000768 Rev. 1 9

Cleaning The Warming Drawer

Painted Or Enameled Surfaces

C A

R E A

N D

C LEA

N IN

G :

Rack Clean the rack with detergent and water. After cleaning, rinse the rack with clean water and dry with a clean cloth.

Control Knob The control knob may be removed for easier cleaning. Make sure the knob is in the PROOF position and pull it straight off the stem for cleaning.

The knob should be washed with soap and water. Make sure the inside of the knob is dry before replacing. Replace the knob in the PROOF position to ensure proper placement.

Stainless Steel - Excluding Black Stainless Steel (on some models)

To clean the stainless steel surface, use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface.

Cleanser will remove surface rust, tarnish and small

the direction of the brush lines with a damp, soft sponge. To inquire about purchasing cleaning products including stainless steel appliance cleaner or polish, see the Accessories and Consumer Support sections at the end of this manual.

10 49-2000768 Rev. 1

Installation Instructions

If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737) or visit our website at: GEAppliances.com

BEFORE YOU BEGIN Read these instructions completely and carefully.

IMPORTANT Save these instructions for local inspectors use.

IMPORTANT Observe all governing codes and ordinances.

Note to Installer instructions with the Consumer.

Note to Consume future reference.

Product failure due to improper installation is not covered under the Warranty.

WARNING This appliance must be properly grounded.

WARNING Insure that the power cord does not contact the hot surfaces on the bottom of ovens, cooktops, or any other appliance.

Proper installation is the responsibility of the installer and product failure due to improper installation is NOT covered under warranty.

MATERIALS YOU WILL NEED

TOOLS REQUIRED

Warming Drawer PKW7000 and PTW9000

IN ST

A LL

AT IO

N IN

ST R

U C

TI O

N S

Cut Resistant Gloves

Phillips Screwdriver

Hand Saw

Wood screws and adhesive or other hardware for installing runners or shelf to support warmer drawer.

Runners must be level, rigidly mounted and capable of supporting 150 pounds.

2 x 4 or 2 x 2 lumber for runners and brace

Safety Glasses

Measuring Tape

49-2000768 Rev. 1 11

IN STA

LLATIO N

IN STR

U C

TIO N

S Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS

PRE-INSTALLATION CHECKLIST

GROUNDING INSTRUCTIONS IMPORTANT(Please read carefully) FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED. This warming drawer must be supplied with 120V, 60Hz, and connected to an individual, properly grounded branch circuit, and protected by a 15 or 20 amp circuit breaker or time delay fuse.

A properly grounded 3-prong receptacle should be located within reach of the drawers 56" long power cord.

within 42 of the right side or, within 16 of the left side or A recessed receptacle may be located on the right side of the cutout, 7 maximum from the back of the cabinet. In this location, the excess power cord should be coiled and taped to the right side of the unit.

IMPORTANT(Please read carefully) The power cord of this appliance is equipped with a 3-prong (grounding) plug that mates with a standard 3-prong grounding wall receptacle to minimize the possibility of electric shock. The customer should have the wall receptacle and circuit checked by a qualified electrician to make sure the receptacle is properly grounded and has the correct polarity.

Where a standard 2-prong wall receptacle is encountered, it is the personal responsibility and obligation of the customer to have it replaced with a properly grounded 3-prong wall receptacle.

third (ground) prong from the power cord. DO NOT USE AN EXTENSION CORD OR ADAPTER PLUG WITH THIS APPLIANCE. FOLLOW NATIONAL ELECTRICAL CODES AND ORDINANCES.

A When preparing warming drawer cabinet, make sure the inside of the cabinet and the warming drawer do not interfere with each other. (see sections on preparing cabinet)

B remove packaging materials could result in damage to the appliance. Remove all packing parts from warming drawer including lifting up the warming drawer to confirm all packaging is removed.

C Remove Installation Instructions from literature pack and read them carefully before you begin.

Installations, etc in a safe place for future reference.

Rating plate

Recessed receptacle 7" max. from rear on right side

1/2 hole for power cord for left or right side outlet location

12 49-2000768 Rev. 1

Installation Instructions PREPARING CABINET: BELOW A COUNTERTOP

When installed, the front face of the warming drawer will be nearly flush with cabinetry doors or drawer fronts.

of the opening. The rough opening for the drawer must be:

1/2 minimum from inside back to front of cabinet frame.

1/2 for 27 wide models 28 1/2 for 30 wide models.

1/4 1/4

from floor to bottom of cutout is recommended for under countertop installation.

Installation below a cabinet drawer: The warming drawer may be installed beneath a cabinet drawer. In this installation, a solid barrier should be installed above the warming drawer to

thick plywood. Allow at least 1/4 air gap between the barrier and the top of the warming drawer. Observe the 5 min. above the floor or 1 above the toekick min. installation height. NOTE: If you are installing in frameless cabinets, it may be necessary to install 1/2 wide cleats to accept drawer mounting screws. See drawer to find exact locations of mounting screws. When installed under a cooktop: Warming drawers are suitable for installation below only certain specified cooktop models. See the label attached to the top of the warming drawer for suitable models. A solid barrier and air gap between cooktop

IN ST

A LL

A TI

O N

IN ST

R U

C TI

O N

S

Electrical outlet 42" max. from right side

1" Min.*

25"

9" 91/4

231/2 Min.

36" Countertop

height

Electrical outlet 16 max. from left side

Electrical outlet flush with side of cabinet 7" max.

Install 2x4 or 2x2 anti-tip block

against rear cabinet wall 9 from floor to

bottom of block 7"

11/2 Cabinet top

Install a solid barrier and a 1/4 min. air gap above warming drawer

1/4 Air gap

Solid barrier

Install a solid barrier below

* NOTE: When installing the warming drawer below a cooktop, a solid barrier must be installed at least 1" from the lowest point of

solid material such as 1/4" thick plywood. Allow at least 1/4" air gap between the barrier and the top of the warming drawer. See label on top of the warming drawer for approved cooktop models.

Dimension A 27" Drawer 30" Drawer

25 1/2 28 1/2

49-2000768 Rev. 1 13

PREPARING CABINET: BELOW WALL OVENS INSTALLATION BELOW A SINGLE OVEN

INSTALLATION BELOW A DOUBLE OVEN

When installed, the front face of the warming drawer will be nearly flush with cabinetry doors or drawer fronts.

of the opening. The rough opening for the drawer must be:

1/2 minimum from inside back to front of cabinet frame.

1/2 for 27 wide models 28 1/2 for 30 wide models.

1/4

cutouts for clearance of overlaps

NOTE: If you are installing in frameless cabinets, it may be necessary to install 1/2 wide cleats to accept drawer mounting screws. See drawer to find exact locations of mounting screws. When installed under a wall oven: Warming drawers are suitable for installation below only certain specified wall oven models. See the label attached to the top of the warming drawer for suitable models. NOTE: Electrical receptacle can be installed as shown

above the top of the warming drawer cutout.

IN STA

LLATIO N

IN STR

U C

TIO N

S Installation Instructions

23 1/2 Min.

2x2 or 2x4 anti-tip block against rear wall 9 from

floor to bottom of block

1" Min. above toekick or adjust to oven installation height

A

2" Min.

Allow 5/8 overlap on all sides

Oven cutout

NOTE: Additional clearance between cutouts may be required. Check to be sure that oven supports above the warming drawer location do not obstruct the required interior 23 1/2 depth and 9 1/4 height.

Dimension A Dimension B 27" Drawer 25 1/2 26 3/4

30" Drawer 28 1/2 29 3/4

9" 9 1/4"

10 1/2"

23 1/4"

NOTE: Additional clearance between cutouts may be required. Check to be sure that oven supports above the warming drawer location do not obstruct the required interior 231/2 depth and 91/4 height.

2" Min

1" Min. above toekick

2x2 or 2x4 anti-tip block

against rear wall 9 from floor to bottom of block

231/2 Min.

Allow 5/8 overlap on all sides

A

9" 9 1/4"

10 1/2"

23 1/4"

Oven cutout

14 49-2000768 Rev. 1

Installation Instructions INSTALLING CABINET SUPPORT

IMPORTANT: When installed below a single or double oven, check to be sure that any oven supports above the cutout do not obstruct the 23 1/2 required depth of the warming drawer cutout.

A 2" minimum clearance between oven and warming drawer cutouts are required. Additional clearance may be required if 2 x 4 blocks are used to support runners or solid floor of the oven above.

solid bottom, 2 x 4 or 2 x 2 runners.

flush with the bottom edge of the cutout. There is no way to level the drawer once it has

been installed. Be sure supports are level.

the runners or solid floor and must be capable of supporting 150 lbs.

IN ST

A LL

A TI

O N

IN ST

R U

C TI

O N

S

2" x 4" or equivalent runners

231/2231/2

2" x 4" or equivalent runners

22" 25" 27" 30"

49-2000768 Rev. 1 15

INSTALLING ANTI-TIP BRACE

1. Slide the left corner into opening and push power cord into the hole leading to the outlet location. Thread the cord through as drawer is being pushed back into the opening.

If the outlet is installed inside the opening, plug the cord into the outlet. In this location, the excess power cord should be coiled and taped to the right side of the unit. Make sure the cord does not get trapped by the drawer.

NOTE: Insure that the power cord does not contact the hot surfaces on the bottom of ovens, cooktops, or any other appliance.

2. Push the drawer back until the front flange is flush to the cabinet front.

3. Open the drawer fully.

frame, one on each corner.

WARNING ANTI-TIP PRECAUTIONS: The anti-tip brace must be installed to prevent the drawer from tipping forward when opened and loaded. Failure to do so could result in personal injury.

Install 2x4 or 2x2 anti-tip brace against rear cabinet wall 9" from floor to bottom of brace

2x4 or 2x2 runners or solid bottom

9"

INSTALLING WARMING DRAWER

IN STA

LLATIO N

IN STR

U C

TIO N

S Installation Instructions

16 49-2000768 Rev. 1

Save time and money! Review the charts on the following pages first and you may not need to call for service.

Troubleshooting tips ...

Problem Possible Cause What To Do Warming drawer will not work

A fuse in your home may be blown or the circuit breaker tripped.

Replace the fuse or reset the circuit breaker.

Warming drawer not plugged in. Plug in. Controls improperly set.

Drawer does not slide smoothly or drags

Fully extend the drawer and push it all the way in. See the Care and cleaning section. Reduce weight to less than 50 pounds. Redistribute drawer contents.

Excessive condensation

Remove liquid. Cover food with lid or aluminum foil.

Temperature setting too high. Reduce temperature setting. Incorrect Moisture Selector setting. Set the Moisture Selector to the open vent setting

to allow venting. No heat in the PROOF setting

Room temperature may prevent the thermostat from tripping on.

Food dries out Moisture escaping. Cover food with lid or aluminum foil.

TR O

U B

LE SH

O O

TI N

G T

IP S

49-2000768 Rev. 1 17

GEAppliances.com All warranty service is provided by our Factory Service Centers, or an authorized Customer Care technician. To schedule service online, visit us at GEAppliances.com/service, or call GE Appliances at 800.GE.CARES (800.432.2737). Please have your serial number and your model number available when calling for service. Servicing your appliance may require the use of the onboard data port for diagnostics. This gives a GE Appliances factory service technician the ability to quickly diagnose any issues with your appliance and helps GE Appliances improve its products by providing GE Appliances with information on your appliance. If you do not want your appliance data to be sent to GE Appliances, please advise your technician not to submit the data to GE Appliances at the time of service.

What GE Appliances will not cover: Service trips to your home to teach you how to use

the product.

modified or used for other than the intended purpose or used commercially.

breakers.

floods or acts of God.

blemishes not reported within 48 hours of delivery.

possible defects with this appliance.

lamps.

EXCLUSION OF IMPLIED WARRANTIES

including the implied warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law.

This limited warranty is extended to the original purchaser and any succeeding owner for products purchased for

is not available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized GE Appliances Service location for service. In Alaska, the limited warranty excludes the cost of shipping or service calls to your home. Some states do not allow the exclusion or limitation of incidental or consequential damages. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights are, consult your local or state consumer affairs office or your states Attorney General.

Warrantor: GE Appliances, a Haier company

For the period of GE Appliances will replace One year From the date of the original purchase

Any part of the warming drawer which fails due to a defect in materials or workmanship. limited one-year warranty, GE Appliances will provide, free of charge, all labor

and in-home service to replace the defective part.

GE Appliances Electric Warming Drawer Limited Warranty Staple your receipt here. Proof of the original purchase date is needed to obtain service under the w

arranty. LIM

ITED W

A R

R A

N TY

18 49-2000768 Rev. 1

Notes

49-2000768 Rev. 1 19

Accessories

Parts Wire Rack

Cleaning Supplies CitruShine Stainless Steel Wipes

Stainless Steel Appliance Cleaner

A C

C ESSO

R IES

Looking For Something More? GE Appliances offers a variety of accessories to improve your cooking and maintenance experiences! Refer to the Consumer Support page for phone numbers and website information.

Accessories

20 49-2000768 Rev. 1

Printed in China

Consumer Support C

O N

SU M

ER S

U PP

O R

T

GE Appliances Website Have a question or need assistance with your appliance? Try the GE Appliances Website 24 hours a day, any day of the year! You can also shop for more great GE Appliances products and take advantage of all our on-line support

GEAppliances.com

Register Your Appliance Register your new appliance on-line at your convenience! Timely product registration will allow for enhanced communication and prompt service under the terms of your warranty, should the need arise. You may also mail in the pre-printed registration card included in the packing material.

GEAppliances.com/register

Schedule Service Expert GE Appliances repair service is only one step away from your door. Get on-line and schedule your service at your convenience any day of the year.

GEAppliances.com/service or call 800.432.2737 during normal business hours.

Extended Warranties Purchase a GE Appliances extended warranty and learn about special discounts that are available while your warranty is still in effect. You can purchase it on-line anytime. GE Appliances Services will still be there after your warranty expires.

GEAppliances.com/extended-warranty or call 800.626.2224 during normal business hours.

Remote Connectivity For assistance with wireless network connectivity (for models with remote enable), visit our website at GEAppliances.com/connect or call 800.220.6899

Parts and Accessories Individuals qualified to service their own appliances can have parts or accessories sent directly to their homes

GEApplianceparts.com or by phone at 877.959.8688 during normal business hours.

Instructions contained in this manual cover procedures to be performed by any user. Other servicing generally should be referred to qualified service personnel. Caution must be exercised, since improper servicing may cause unsafe operation.

Contact Us If you are not satisfied with the service you receive from GE Appliances, contact us on our Website with all the

GEAppliances.com/contact

Escriba los nmeros de modelo y de serie aqu:

N de Modelo ___________________________

N de Serie _____________________________

Los podr encontrar en la etiqueta ubicada en el lado trasero sobre el frente del cajn inferior.

49-2000768 Rev. 1 01-21 GEA

PKW7000 PTW9000

MANUAL DEL PROPIETARIO Y INSTALACIN

C A

J N

P A

R A

C A

LE N

TA R

E

l ct

ri co

INFORMACIN DE SEGURIDAD . . 3

USO DEL CAJN PARA CALENTAR Funciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Consejos de Funcionamiento . . . . . . . . . . . . . . 6

CUIDADO Y LIMPIEZA Limpieza del Cajn para Calentar . . . . . . . . . . 9

INSTRUCCIONES DE INSTALACIN . . . . . . . . . . . . . . . . . . 10

SOLUCIN DE PROBLEMAS. . . . . . .16

GARANTA LIMITADA . . . . . . . . . . . . . .17

ACCESORIOS . . . . . . . . . . . . . . . . . . . . . . .19

SOPORTE PARA EL CONSUMIDOR . . . . . . . . . . . . . . . . . . 20

2 49-2000768 Rev. 1

GRACIAS POR HACER QUE GE APPLIANCES SEA PARTE DE SU HOGAR.

Ya sea que haya crecido usando GE Appliances, o que sta es su primera vez, nos complace tenerlo en la familia.

Sentimos orgullo por el nivel de arte, innovacin y diseo de cada uno de los electrodomsticos de GE Appliances, y creemos que usted tambin. Entre otras cosas, el registro de su electrodomstico

asegura que podamos entregarle informacin importante del producto y detalles de la garanta cuando los necesite.

Registre su electrodomstico GE ahora a travs de Internet. Sitios Web y nmeros telefnicos tiles estn disponibles en la seccin de Soporte para el Consumidor de este Manual del Propietario.

Tambin puede enviar una carta en la tarjeta de inscripcin preimpresa que se incluye con el material embalado.

49-2000768 Rev. 1 3

IN FO

R M

A C

I N

D E SEG

U R

ID A

D

ADVERTENCIA Lea todas las instrucciones antes de usar el producto. Si no se siguen estas instrucciones se podrn producir incendios, descargas elctricas, lesiones graves o la muerte.

ADVERTENCIA AVISO IMPORTANTE DE SEGURIDAD Todos los cajones para calentar se pueden volcar y producirse lesiones si no se instalan de forma correcta. Para evitar cadas accidentales del cajn para calentar, adhiera el mismo a la pared con una abrazadera anti volcaduras, como se describe en las instrucciones de instalacin.

ADVERTENCIA INSTRUCCIONES GENERALES DE SEGURIDAD

original, como se describe en el Manual del Propietario.

su electrodomstico de forma correcta y que est adecuadamente conectado a tierra, de acuerdo con las instrucciones de instalacin provistas.

parte del cajn para calentar, a menos que se recomiende especficamente en este manual. Cualquier otra reparacin deber ser realizada por un tcnico calificado.

desconecte el suministro de corriente desde el panel de distribucin del hogar, retirando el fusible o desconectando el disyuntor.

los nios solos o fuera de su radio de atencin en el rea donde el electrodomstico se encuentre en

pararse sobre ninguna parte del electrodomstico.

PRECAUCIN inters para los nios sobre los gabinetes que

se trepan sobre el cajn para calentar para llegar a estos artculos podrn sufrir lesiones graves.

ollas hmedos sobre superficies calientes podrn

que los mangos de las ollas toquen los elementos

voluminosa para reemplazar el mango de las cacerolas.

calefaccionar la habitacin.

superficie interior del cajn para calentar. Es posible que estas superficies estn demasiado calientes como para quemar, aunque su color sea oscuro. Durante y despus del uso, no toque ni permita que telas u otros materiales inflamables tengan contacto con cualquier rea interior del cajn para calentar; espere a que haya pasado un tiempo suficiente para que se enfren. Otras superficies del electrodomstico se podrn calentar lo suficiente como para ocasionar lesiones. Las superficies potencialmente calientes incluyen la abertura de la ventilacin del cajn para calentar, superficies cercanas a la abertura y grietas alrededor de la puerta del cajn para calentar.

abiertos. Se podra acumular presin y el envase podra explotar, ocasionando una lesin.

inferior el cajn para calentar. El papel de aluminio puede atrapar el calor o derretirse, ocasionando daos sobre el producto y riesgos de descargas elctricas o incendios.

vidrio o los paneles de control. Hacer esto podr

con un vidrio roto. Es posible que se produzcan descargas, incendios o cortes.

las comidas cocinadas a temperatura para servir (superior a 140F). Se generarn bacterias si la comida se encuentra a menos de 140F. Por lo tanto, siempre comience con comida caliente; la comida fra no se podr calentar ni cocinar en el cajn para calentar.

INFORMACIN IMPORTANTE DE SEGURIDAD LEA TODAS LAS INSTRUCCIONES ANTES DE USAR

LEA Y GUARDE ESTAS INSTRUCCIONES

4 49-2000768 Rev. 1

ADVERTENCIA MANTENGA LOS MATERIALES INFLAMABLES ALEJADOS DEL CAJN PARA CALENTAR Si esto no se cumple, se podrn sufrir lesiones personales graves o incendios.

cerca de un cajn para calentar, incluyendo papel, plstico, mangos de ollas, trapos, cobertores de pared, cortinas, paos y gasolina u otros vapores y lquidos inflamables.

mientras usa el electrodomstico. Estas prendas se podrn incendiar si entran en contacto con

superficies calientes, ocasionando quemaduras graves.

materiales inflamables se acumulen en o cerca del cajn para calentar. La grasa que se encuentre en el cajn para calentar o cerca del mismo se podr incendiar.

ADVERTENCIA EN CASO DE INCENDIO, SIGA LOS SIGUIENTES PASOS PARA EVITAR LESIONES Y LA PROPAGACIN DEL FUEGO

tome una olla que se est incendiando. ahogue el fuego cerrando la puerta del cajn para calentar y apagando el mismo o usando un qumico seco multipropsito o un extintor de incendio con espuma.

ADVERTENCIA INSTRUCCIONES DE SEGURIDAD DEL CAJN PARA CALENTAR

puerta del mismo. El aire caliente o el vapor que sale puede causar quemaduras en las manos, rostro y/u ojos.

calentar.

de grasa. La grasa del cajn para calentar se podr incendiar.

la ubicacin deseada mientras ste se encuentre fro. Si es necesario mover el estante mientras el cajn para calentar est caliente, evite que el mango de la olla tenga contacto con el elemento de calentamiento que se encuentra caliente en el cajn para calentar.

cocina o comida en el cajn para calentar cuando no est en uso. Los tems guardados en el cajn para calentar se podrn incendiar.

Cmo Retirar la Pelcula Protectora de Envo y la Cinta de Embalaje Con cuidado tome un extremo de la pelcula protectora de envo con los dedos y lentamente retire la misma de la superficie del electrodomstico. pelcula. Retire toda la pelcula antes de usar el electrodomstico por primera vez.

Para asegurar que no haya daos sobre el acabado del producto, la forma ms segura de retirar el adhesivo de la cinta de embalaje en electrodomsticos nuevos es aplicando un detergente lquido hogareo para lavar platos. Aplique con una tela suave y deje que se seque.

NOTA: El adhesivo deber ser eliminado de todas las partes.

IN FO

R M

A C

I N

D E

SE G

U R

ID A

D INFORMACIN IMPORTANTE DE SEGURIDAD LEA TODAS LAS INSTRUCCIONES ANTES DE USAR

LEA Y GUARDE ESTAS INSTRUCCIONES

49-2000768 Rev. 1 5

Funciones U

SO D

EL C A

J N

PA R

A C A

LEN TA

R : Funciones

El cajn para calentar mantendr las comidas calientes y cocinadas en la temperatura para servir. Siempre comience con comida

Perilla de Control Los controles del caj para calentar se encuentran escondidos en el cierre del cajn. Abra el cajn. Los controles estn sobre el lado derecho del marco frontal. Para usar el cajn para calentar, presione el interruptor ON/OFF (Encender/ Apagar) en la posicin ON (Encender). Deslice el control del selector de humedad sobre la posicin abierta o apagada (Consulte la seccin del Selector de Humedad).

Gire la perilla de control hasta la posicin deseada.

Luz de Seal en ON (Encendida) La luz de seal ON (Encendida) se encuentra ubicada debajo del interruptor ON/OFF (Encendido/ Apagado) y brilla cuando el interruptor ON/OFF (Encendido/ Apagado) est en la posicin ON (Encendido). Permanece encendido hasta que el interruptor ON/OFF (Encendido/ Apagado) se mueve a la posicin OFF (Apagado).

La luz de seal ON (Encendido) es visible a travs del visor de luz en el panel frontal del cajn cuando se cierra el cajn. ste es un recordatorio de que el calor est activado.

Selector de Humedad El selector de humedad se encuentra ubicado en el frente interior del cajn. Para mantener las comidas hmedas, deslice el control del selector de humedad hacia afuera de la perilla de control. Esto cierra la ventilacin y sella la humedad dentro del cajn. Con la ventilacin cerrada las comidas calientes permanecen hmedas y suaves. En esta configuracin, se podr producir condensacin alrededor del extremo interior del cajn.

Para mantener las comidas crocantes, deslice el control del selector de humedad hacia la derecha en direccin a la perilla de control. Esto abre las ventilaciones y permite que la humedad salga. Con las ventilaciones abiertas, es normal que se acumule humedad sobre superficies que estn por encima del cajn para calentar.

PROOF (Leudar) . . . . . . . . . . . . 75 a 95F

LOW (Bajo) . . . . . . . . . . . . . .140 a 160F

MED (Medio) . . . . . . . . . . . . . 160 a 195F

HIGH (Alto) . . . . . . . . . . . . . .195 a 230F

Perilla de Control

Interruptor

Luz de Seal en

Placa de Especificaciones Tcnicas

Lentes del Visor de la

(Encendida)

Cajn para Calentar

Selector de Humedad (en la parte trasera del

panel)

MoistClosedVent CrispOpenVent

HIGH

PROOF

MED

LOW

6 49-2000768 Rev. 1

Consejos de Funcionamiento Estante

tems.

U SO

D EL

C A

J N

P A

R A

C A

LE N

TA R

: C on

se jo

s de

F un

ci on

am ie

nt o

Apilamiento doble de los tems con el estante en su posicin.

Al Usar el Cajn para Calentar

precaliente: LOW (Bajo) 8 minutos MED (medio) 15 minutos HIGH (Alto) 20 minutos

NOTA: Es posible que la comida en recipientes de vidrio con proteccin trmica o cacerolas de vidrio cermico necesiten una configuracin ms alta del termostato en comparacin con las comidas en cacerolas metlicas.

salga y que la comida se enfre. Deje transcurrir un tiempo adicional para que la temperatura interior del cajn se estabilice luego de agregar tems.

usar una configuracin de termostato ms alta y cubrir algunos de los tems de comida cocinados.

coccin o ser transferida a un plato con proteccin trmica para servir.

fin de evitar que se seque.

PRECAUCIN Los envases de plstico o envoltorios de plsticos se derretirn si entran en contacto directo con el cajn. Es posible que no pueda quitar el plstico derretido y esto no est cubierto por la garanta.

envases en el cajn para calentar.

Para Calentar Tazones y Platos para Servir Para calentar tazones y platos para servir configure el control en LOW (Bajo).

la parte inferior del cajn. Si desea platos ms calientes o calentar porcelana fina, consulte al fabricante de los platos sobre el nivel de tolerancia mxima de calor.

cajn.

platos vacos para servir al mismo tiempo, coloque los platos para servir en la posicin de estantes alta y la comida en la parte inferior del cajn.

PRECAUCIN Es posible que los platos estn

calientes.

49-2000768 Rev. 1 7

Consejos de Funcionamiento La masa con levadura se podr leudar en el cajn para calentar. La masa con levadura se podr leudar en el cajn para calentar.

LOW (Bajo) y luego inmediatamente de nuevo a PROOF (Leudar).

recipiente lo suficientemente grande como para duplicar el tamao de la masa. Cubra con una tela.

tiempo segn sea necesario. La masa deber permanecer en el cajn hasta que haya duplicado su tamao y se produzca una leve depresin cuando se toque la superficie de forma suave con el dedo.

U SO

D EL C

A J

N PA

R A C

A LEN

TA R

: C onsejos de Funcionam

iento

CrispOpenVent

Para que tems Duros queden Crocantes

ventilacin. tiempo segn sea necesario.

Cuadro de Seleccin de Temperatura para Comidas Crocantes Para mantener calientes varios tipos de comidas diferentes, programe la temperatura en la configuracin para comidas que necesitan el grado ms alto. Coloque los tems que necesiten la configuracin ms alta en la parte inferior del cajn, y en el estante los tems que necesiten menos calor.

Consejos:

recomendados.

MoistClosedVent

Tipo de Comida Configuracin del

Control

Configuracin del Selector de

Humedad Tocino HIGH (Alto) ABRIR

Pan, panes crocantes

MED (Medio) ABRIR

Pan, panes crocantes

HIGH (Alto) ABRIR

Tartas, doble crocante

MED (Medio) ABRIR

Pizza HIGH (Alto) ABRIR

Papas, horneadas HIGH (Alto) ABRIR

Tortilla Chips LOW (Baja) ABRIR

8 49-2000768 Rev. 1

MoistClosedVent

Consejos de Funcionamiento Cuadro de Seleccin de Temperatura para Comidas Hmedas Para mantener calientes varios tipos de comidas diferentes, programe la temperatura en la configuracin para comidas que necesitan el grado ms alto. Coloque los tems que necesiten la configuracin ms alta en la parte inferior del cajn, y en el estante los tems que necesiten menos calor.

Consejos:

recomendados.

U SO

D EL

C A

J N

P A

R A

C A

LE N

TA R

: C

on se

jo s

de F

un ci

on am

ie nt

o

temperaturas interiores.

Tipo de Comida

Configuracin del Control

Configuracin del Selector de

Humedad Bife, medio o bien cocido* MED (medio) CERRADO

Pan, panes blandos MED (medio) CERRADO

Cazuelas MED (medio) CERRADO

Cereal cocido MED (medio) CERRADO

Huevos MED (medio) CERRADO

Pescado, mariscos MED (medio) CERRADO

Fruta MED (medio) CERRADO

Salsa para carne, salsas cremosas MED (medio) CERRADO

Jamn MED (medio) CERRADO

Cordero MED (medio) CERRADO

Panqueques, gofres HIGH (Alto) CERRADO

Tartas, una capa crocante MED (medio) CERRADO

Cerdo MED (medio) CERRADO

Papas, pisadas MED (medio) CERRADO

Ave HIGH (Alto) CERRADO

Vegetables MED (medio) CERRADO

49-2000768 Rev. 1 9

Limpieza del Cajn para Calentar Asegrese que todos los controles estn en la posicin OFF (Apagado) y que todas las superficies estn fras antes de limpiar cualquier parte del cajn para calentar.

Superficies Pintadas o Esmaltadas

C U

ID A

D O

Y LIM PIEZA

: Lim pieza del C

ajn para C alentar

Acero Inoxidable

Para limpiar la superficie de acero inoxidable, use agua tibia con jabn o un limpiador o pulidor para acero inoxidable. Siempre limpie la superficie en la direccin del veteado. Siga las instrucciones del limpiador para limpiar la superficie de acero inoxidable.

Los limpiadores con cido oxlico tales como Bar Keepers Friend Soft Cleanser eliminarn el xido, deslustres y pequeas

y frote en la direccin de las lneas del cepillo con una esponja suave y hmeda. Para realizar consultas sobre la adquisicin de productos de limpieza, incluyendo limpiadores o pulidores para electrodomsticos de acero inoxidable, lea las secciones de Accesorios y Soporte al Consumidor al final de este manual.

Estante Limpie el estante con detergente y agua. Luego de la limpieza, enjuague el estante con agua limpia y seque con una tela limpia.

Perilla de Control La perilla de control se puede retirar para facilitar la limpieza. Asegrese de que la perilla est en la posicin PROOF (Leudar) y extraiga la misma desde el vstago para su limpieza.

La perilla se deber lavar con agua y jabn. Asegrese que el interior de la perilla est seco antes de volver a colocarla. Vuelva a ubicar la perilla en la posicin PROOF (Leudar) para asegurar una colocacin adecuada.

10 49-2000768 Rev. 1

Instrucciones de instalacin

Si tiene preguntas, llame a GE Appliances al 800.GE.CARES (800.432.2737) o visite nuestro sitio web en: GEAppliances.com.

ANTES DE COMENZAR Lea estas instrucciones en su totalidad y atentamente.

IMPORTANTE Conserve estas instrucciones para uso del inspector local.

IMPORTANTE Cumpla con todos los cdigos y ordenanzas gubernamentales.

Nota para el Instalador Asegrese de entregarle estas instrucciones al Consumidor.

Nota para el Comprador Guarde estas instrucciones para referencia futura.

Si se producen fallas en el producto debido a una instalacin inadecuada, la Garanta no cubrir las mismas.

ADVERTENCIA Este electrodomstico deber estar conectado a tierra de forma adecuada.

ADVERTENCIA Asegrese de que el cable de corriente no tenga contacto con las superficies calientes en la parte inferior de los hornos, superficies de coccin, u otros electrodomsticos.

La instalacin correcta es responsabilidad del instalador y cualquier falla del producto debido a una instalacin inadecuada NO estar cubierta por la garanta.

MATERIALES NECESARIOS

HERRAMIENTAS REQUERIDAS

Cajn para Calentar PKW7000 y PTW9000

IN ST

R U

C C

IO N

ES D

E IN

ST A

LA C

I N

Guantes Resistentes a Cortes

Taladro y broca de 1/16

Destornillador Phillips

Sierra Manual

Tornillos de madera y adhesivos u otros materiales para la instalacin de tirantes o una repisa para sostener el

cajn para calentar.

Los tirantes debern estar nivelados, montados de forma rgida y debern poder soportar 150 libras.

Madera para tirantes y abrazaderas de 2 x 4 o 2 x 2

Gafas de Seguridad

Cinta de Medicin

49-2000768 Rev. 1 11

IN STR

U C

C IO

N ES D

E IN STA

LA C

I N

Instrucciones de instalacin INSTRUCCIONES IMPORTANTES DE SEGURIDAD

LISTA DE CONTROL DE PREINSTALACIN

INSTRUCCIONES DE CONEXIN A TIERRA IMPORTANTE (Lea detenidamente) PARA SU SEGURIDAD PERSONAL, ESTE ELECTRODOMSTICO DEBER ESTAR ADECUADAMENTE CONECTADO A TIERRA. Este cajn para calentar deber ser provisto con 120V, 60Hz, y estar conectado a un circuito de empalmes individual correctamente conectado a tierra, y protegido por un disyuntor o fusible de retardo de 15 o 20 amp.

a tierra deber estar ubicado dentro del alcance del cable de corriente largo de 56" del cajn.

dentro de las 42 del lado derecho o, dentro de las 16 del lado izquierdo o,

del lado derecho del espacio libre, a un mnimo de 7 desde la parte trasera del gabinete. En esta ubicacin, el cable de corriente excedente deber estar enroscado y encintado sobre el lado derecho de la unidad.

IMPORTANTE (Lea detenidamente) El cable de corriente de este electrodomstico cuenta con un enchufe de 3 cables (con cable a tierra) que se conecta a un tomacorriente de pared estndar de 3 cables con conexin a tierra para minimizar la posibilidad de descargas elctricas. El cliente deber contratar a un electricista calificado para que controle el receptculo de pared y el circuito, a fin de asegurar que el receptculo est correctamente conectado a tierra y que posea la polaridad adecuada.

En caso de contar con un tomacorriente de pared de 2 cables, es la responsabilidad y obligacin del cliente reemplazarlo por un receptculo de pared de 3 cables correctamente conectado a tierra.

tercer cable (tierra) del cable de corriente. NO USE PROLONGADORES NI ENCHUFES ADAPTADORES CON ESTE ELECTRODOMSTICO. CUMPLA CON LOS CDIGOS Y ORDENANZAS NACIONALES DE ELECTRICIDAD.

A Al preparar el gabinete del cajn para calentar, asegrese de que el interior del gabinete y el cajn para calentar no interfieran uno con otro. (Consulte las secciones sobre la preparacin del gabinete).

B RETIRE LOS MATERIALES DE EMBALAJE: Si no se retiran los materiales del embalaje se podrn producir daos sobre el electrodomstico. Retire todas las piezas embaladas del cajn para calentar, incluyendo levantar el cajn para calentar a fin de configrar que todo el embalaje fue retirado.

C Retire las Instrucciones de Instalacin del paquete de instrucciones y lea las mismas de forma detenida antes de comenzar. Asegrese de colocar todas las instrucciones, el Manual del Propietario, las Instrucciones de Instalacin, etc., en un lugar seguro para referencia futura.

Placa de Especificaciones Tcnicas

Receptculo empotrado de 7 de mx. desde la parte trasera del lado derecho

Perfore un agero de 1 para el cable de corriente para la ubicacin de salida izquierda o derecha.

12 49-2000768 Rev. 1

Instrucciones de instalacin PREPARACIN DEL GABINETE. DEBAJO DE UNA MESADA

estar correctamente nivelado con las puertas de los gabinetes y frentes de los cajones.

estremos puntiagudos en todos los lados de la abertura. La apertura aproximada del cajn deber ser de: Profundidad: Mnimo de 23 desde la parte interior

trasera hasta el frente del marco del gabinete. Ancho: modelos de 25 por 27 de ancho

modelos de 28 por 30 de ancho Alto: 9

recoimendan 23 desde el piso hasta la parte inferior del espacio libre para la instalacin en bajo mesadas.

Instalacin debajo del cajn de un gabinete: El cajn para calentar se podr instalar debajo del cajn de un gabinete. En esta instalacin, se deber instalar una barrera slida sobre el cajn para calentar a fin de

un contrachapado grueso de . Deje una brecha de aire de por lo menos entre la barrera y la parte superior del cajn para calentar. Respete el mn. de 5" sobre el piso o 1 sobre la altura mn. de instalacin del zcalo. NOTA: Si realizar la instalacin en gabinetes sin marco, ser necesario instalar ristreles anchos de " que acepten los tornillos de montaje del cajn. Observe el cajn para encontrar las ubicaciones exactas de los tornillos de montaje. Cuando se instale debajo de una superficie de coccin: Los cajones para calentar se adaptan a instalaciones slo debajo de ciertas modelos de superficies de coccin especificados. Consulte la etiqueta adjunta a la parte superior del cajn para calentar a fin de conocer los modelos que se adaptan. Se requiere una barrera slida y una brecha de aire entre la superficie de coccin y el cajn

IN ST

R U

C C

IO N

ES D

E IN

ST A

LA C

I N

Tomacorriente de un mx. de 42 desde el lado derecho

Mn. de 1*

25"

9"

Min. de 23

Altura de la mesada de

36

Tomacorriente de un mx. de 16 desde el lado izquierdo

Tomacorriente nivelado con el lateral del gabinete a un mx. de 7

Instale el bloque anti volcaduras de 2x4 o

2x2 contra la pared del gabinete trasero, a 9"

del piso hasta la parte inferior del bloque. 7"

Parte superior del gabinete a 1

Instale una barrera slida y una brecha de aire de un mn. de sobre el cajn para calentar

Brecha de aire de

Barrera slida

Instale una barrera slida debajo de una superficie

* NOTA: Al instalar el cajn para calentar debajo de una superficie de coccin, se deber instalar una barrera slida a por lo menos 1 desde el punto ms bajo de la parte inferior de la caja de los quemadores de la superficie de coccin hasta la parte superior

contrachapado grueso de . Deje una brecha de aire de por lo menos entre la barrera y la parte superior del cajn para calentar. Consulte la etiqueta en la parte superior del cajn para calentar para conocer los modelos de superficies de coccin aprobados.

9 "

Dimensin A Cajn de 27 Cajn de 30

25-1/2" 28-1/2"

49-2000768 Rev. 1 13

PREPARACIN DEL GABINETE: HORNOS DEBAJO DE LAS PAREDES

INSTALACIN DEBAJO DE UN HORNO SIMPLE

INSTALACIN DEBAJO DE UN HORNO DOBLE

estar correctamente nivelada con las puertas de los gabinetes y frentes de los cajones.

extremos puntiagudos en todos los lados de la abertura. La apertura aproximada del cajn deber ser de: Profundidad: Mnimo de 23 desde la parte interior

trasera hasta el frente del marco del gabinete.

Ancho: modelos de 25 por 27 de ancho modelos de 28 por 30 de ancho

Alto: 9 Deje un mnimo de 2 entre el horno y los

espacios libres dle cajn para los espacios de las superposiciones.

NOTA: Si realizar la instalacin en gabinetes sin marco, ser necesario instalar ristreles anchos de " que acepten los tornillos de montaje del cajn. Observe el cajn para encontrar las ubicaciones exactas de los tornillos de montaje. Cuando se instale debajo de un horno de pared: Los cajones para calentar se adaptan a instalaciones slo debajo de ciertos modelos de horno de pared especificados. Consulte la etiqueta adjunta a la parte superior del cajn para calentar para conocer los modelos que se adaptan. NOTA: El receptculo elctrico se podr instalar como se

el receptculo sobre la parte superior del espacio libre del cajn para calentar.

IN STR

U C

C IO

N ES D

E IN STA

LA C

I N

Instrucciones de instalacin

Mn. de 23

Bloque anti volcaduras de 2x2 o 2x4 contra la pared

trasera a 9" del piso hasta la parte inferior

del bloque

Mn. de 1 sobre el zcalo o realice el ajuste a la altura de la instalacin del horno

A

Mn. de 2

Permita una superposicin de 5/8 en todos los costados

B

Espacio libre del horno

NOTA: Se podr requerir aberturas adicionales entre los espacios libres. Asegrese de que los soportes del horno que estn por encima de la ubicacin del cajn para calentar no obstruyan la profundidad interior requerida de 23 " y la altura de 9 .

9" 9 1/4"

10 1/2"

23 1/4"

NOTA: Se podrn requerir aberturas adicionales entre los espacios libres. Asegrese de que los soportes del horno que estn por encima de la ubicacin del cajn para calentar no obstruyan la profundidad interior requerida de 23 " y la altura de 9 .

Min. de 2"

Mn. de 1 sobre el zcalo

Bloque anti volcaduras

de 2x2 o 2x4 contra la pared trasera a 9" del

piso hasta la parte inferior del

bloque.

Min. de 231/2

Permita una superposicin de 5/8 en todos los costados

9" 9 1/4"

10 1/2"

23 1/4"

Espacio libre del horno

A B

Dimensin A Dimensin B Cajn de 27 25-1/2" 26-3/4" Cajn de 30 28-1/2" 29-3/4"

Dimensin A Dimensin B Cajn de 27 25-1/2" 26-3/4" Cajn de 30 28-1/2" 29-3/4"

14 49-2000768 Rev. 1

Instrucciones de instalacin INSTALACIN DEL SOPORTE DEL GABINETE

IMPORTANTE: Cuando se instalen debajo de un horno simple o doble, asegrese de que cualquier soporte del horno que se encuentre por encima del espacio libre no obstruya la profundidad requerida de 22 o 23 del espacio libre del cajn para calentar.

Se requiere un espacio libre mnimo de 2 entre el horno y el cajn para calentar. Se podr requerir espacio adicional si se usan bloques de 2 x 4 para sostener los tirantes o el piso slido del horno que est encima.

inferiores slidos de 2 x 4 o 2 x 2.

rgida, a nivel con el extremo inferior del espacio libre. No hay forma de nivelar el cajn una vez que fue

instalado. Asegrese de que los soportes estn nivelados.

el piso slido y debern poder soportar 150 libras. IN ST

R U

C C

IO N

ES D

E IN

ST A

LA C

I N

23-1/2"

Tirantes de 2" x 4" o equivalentes

25" 30"

22-1/2"

22" 27"

Tirantes de 2" x 4" o equivalentes

49-2000768 Rev. 1 15

INSTALACIN DEL SOPORTE ANTI VOLCADURAS

1. Deslice la esquina izquierda sobre la abertura y empuje el cable de corriente dentro del agujero que conduce hasta la ubicacin del tomacorriente. Pase el cable a medida que el cajn se est empujando hacia atrs en la abertura.

Si se instala la salida dentro de la abertura, enchufe el cable en el tomacorriente. En esta ubicacin, el cable de corriente excedente deber estar enroscado y encintado sobre el lado derecho de la unidad. Asegrese de que el cable no quede atrapado por el cajn.

NOTA: Asegrese de que el cable de corriente no tenga contacto con las superficies calientes en la parte inferior de los hornos, superficies de coccin, u otros electrodomsticos.

2. Empuje el cajn hacia atrs hasta que la brida est nivelada con el frente del gabinete.

3. Abra el cajn completamente.

4. Perfore agujeros piloto a travs de los agujeros de la estructura que se superpone, uno en cada esquina.

5. Coloque los tornillos de madera provistos en cada esquina.

ADVERTENCIA PRECAUCIONES ANTI VOLCADURAS: Se deber instalar la abrazadera anti volcaduras para evitar que el cajn se vuelque hacia adelante cuando se abra y cargue. Si esto no se cumple, se podrn sufrir lesiones personales.

Instale la abrazadera anti volcaduras de 2x4 o 2x2 contra la pared del gabinete trasero, a 9" desde el piso hasta la parte inferior de la abrazadera.

Tirantes de 2x4 o 2x2 o parte inferior

slida

9"

INSTALACIN DEL CAJN PARA CALENTAR

IN STR

U C

C IO

N ES D

E IN STA

LA C

I N

Instrucciones de instalacin

16 49-2000768 Rev. 1

Problema Causa Posible Qu Hacer El cajn para calentar no funciona

Es posible que haya un fusible quemado en su hogar o que se haya desconectado el disyuntor.

Reemplace el fusible o reinicie el disyuntor.

El cajn para calentar no est enchufado. Enchufe el mismo. El control est configurado de forma incorrecta.

calentar. El cajn no se desliza de forma pareja o se arrastra.

Las ruedas deslizantes estn desalineadas. Extienda totalmente el cajn y empuje el mismo totalmente hacia adentro. Consulte la seccin de Cuidado y limpieza.

El cajn est sobrecargado o la carga est desbalanceada.

Reduzca el peso a menos de 50 libras. Redistribuya los contenidos del cajn.

Condensacin excesiva

Lquido en el cajn para calentar Retire el lquido. Comidas no cubiertas Cubra la comida con una tapa o papel de

aluminio. La configuracin de temperatura es demasiado alta.

Reduzca la configuracin de temperatura.

Configuracin incorrecta del Selector de Humedad

Ajuste el Selector de Humedad en la configuracin de ventilacin abierta para permitir la ventilacin.

No hay calor en la configuracin PROOF (Leudar).

Es posible que la temperatura de la sala impida que el termostato se active.

Gire la perilla a LOW (Bajo) y luego nuevamente a PROOF (Leudar).

La comida se sec. Escape de humedad Cubra la comida con una tapa o papel de aluminio.

C O

N SE

JO S

PA R

A LA

S O

LU C

I N

D E

PR O

B LE

M A

S

Ahorre tiempo y dinero! Primero revise los cuadros que aparecen en las siguientes pginas y es posible que no necesite solicitar reparaciones.

Consejos para la Solucin de Problemas... Antes de solicitar el servicio tcnico

49-2000768 Rev. 1 17

Abroche su recibo aqu. Para acceder al servicio tcnico de acuerdo con la garanta deber contar con la prueba de la fecha original de com

pra. G

A R

A N

TA LIM ITA

D A

Garanta Limitada de la Cocina Elctrica de GE Appliances GEAppliances.com Todo el servicio de garanta es provisto por nuestros Centros de Servicio de Fabricacin, o un tcnico autorizado de Customer Care. Para programar una visita del servicio tcnico a travs de Internet, vistenos en GEAppliances.com/servic, o llame al 800.GE.CARES (800.432.2737). Cuando llame para solicitar el servicio, tenga los nmeros de serie y modelo disponibles. Para realizar el servicio tcnico de su electrodomstico, se podr requerir el uso de datos del puerto de abordaje para su diagnstico. Esto da al tcnico del servicio de fbrica de GE Appliances la habilidad de diagnosticar de forma rpida cualquier problema con su electrodomstico, y de ayudar a GE Appliances a mejorar sus productos al brindarle a GE Appliances la informacin sobre su electrodomstico. Si no desea que los datos de su electrodomstico sean enviados a GE Appliances, solicitamos que le indique a su tcnico no entregar los datos a GE Appliances en el momento del servicio.

Qu no cubrir GE Appliances: Viajes del tcnico del servicio a su hogar para ensearle

sobre cmo usar el producto.

o uso para propsitos diferentes al original o uso comercial.

incendio, inundaciones o catstrofes naturales.

superficie, deslustres o manchas pequeas no informadas dentro de las 48 horas luego de la entrega.

defectos sobre este producto.

lmparas, excepto las lmparas LED.

EXCLUSIN DE GARANTAS IMPLCITAS Su nica y exclusiva alternativa es la reparacin del producto, como se indica en la Garanta Limitada. Las garantas implcitas, incluyendo garantas implcitas de comerciabilidad o conveniencia sobre un propsito particular, se limitan a un ao o al perodo ms corto permitido por la ley.

Esta garanta limitada se extiende al comprador original y a cualquier propietario posterior de los productos Si el producto est en un rea donde no se encuentra disponible

un Proveedor Autorizado del Servicio Tcnico de GE Appliances, usted ser responsable por el costo de un viaje o se podr requerir que traiga el producto a una ubicacin del Servicio Tcnico de GE Appliances autorizado para recibir el servicio. En Alaska, la garanta limitada excluye el costo de envo o visitas de servicio a su domicilio. Algunos estados no permiten la exclusin o limitacin de daos fortuitos o consecuentes. Esta garanta limitada le otorga derechos legales especficos, y usted tambin podra tener otros derechos que varan de estado a estado. Para conocer cules son sus derechos legales, consulte a la oficina de asuntos del consumidor local o estatal o al Fiscal de su estado.

Garante: GE Appliances, a Haier company Louisville, KY 40225

Por el Perodo de GE Appliances reemplazar Un Ao Desde la fecha de la compra original

Cualquier parte de la cocina que falle debido a un defecto en los materiales o la fabricacin. Durante esta garanta limitada de un ao, GE Appliances tambin proveer, sin costo, todo el trabajo y el servicio en el hogar para reemplazar la parte que presente defectos.

18 49-2000768 Rev. 1

Notas

49-2000768 Rev. 1 19

Piezas Kit del Panel a Medida de 30 de Ancho

Kit de panel Pro de 30" Monogram

Piezas Estante con Rejilla

Suministros de Limpieza Limpiadores de Acero Inoxidable CitriShine

Limpiador para Electrodomsticos de Acero Inoxidable

A C

C ESO

R IO

S Accesorios Busca Algo Ms? GE Appliances ofrece una variedad de accesorios para mejorar sus experiencias de coccin y mantenimiento! Consulte la pgina de Apoyo al Consumidor para informacin sobre la pgina web. Estos y otros productos estn disponibles:

20 49-2000768 Rev. 1

Impreso en China

Soporte para el Consumidor SO

PO R

TE P

A R

A EL

C O

N SU

M ID

O R

Sitio Web de GE Appliances Desea realizar una consulta o necesita ayuda con su electrodomstico? Intente a travs del Sitio Web de GE Appliances las

aprovechar todos nuestros servicios de soporte a travs de Internet, diseados para su conveniencia. GEAppliances.com

Registre su Electrodomstico

una mejor comunicacin y un servicio ms puntual de acuerdo con los trminos de su garanta, en caso de surgir la necesidad. Tambin puede enviar una carta en la tarjeta de inscripcin preimpresa que se incluye con el material embalado.

GEAppliances.com/register

Servicio Programado El servicio de reparacin de expertos de GE Appliances est a slo un paso de su puerta. Conctese a travs de Internet y programe

GEAppliances.com/service o comunquese al 800.432.2737 durante el horario de atencin comercial.

Garantas Extendidas Adquiera una garanta extendida de GE Appliances y conozca los descuentos especiales que estn disponibles mientras su garanta an est vigente. La puede adquirir en cualquier momento a travs de Internet. Los servicios de GE Appliances an estarn all cuando su garanta caduque.

GEAppliances.com/extended-warranty o comunquese al 800.626.2224 durante el horario de atencin comercial.

Conectividad Remota Para solicitar asistencia para la conectividad de red inalmbrica (para modelos con acceso remoto), visite nuestro sitio web en GEAppliances.com/connect

Piezas y Accesorios Aquellos individuos calificados para realizar el servicio tcnico de sus propios electrodomsticos podrn solicitar el envo de piezas o accesorios directamente a sus hogares (se aceptan las tarjetas VISA, MasterCard y Discover). Ordene hoy a travs de

GEApplianceparts.com o de forma telefnica al 877.959.8688 durante el horario de atencin comercial. Las instrucciones que figuran en este manual cubren los procedimientos que sern realizados por cualquier usuario. Otros servicios tcnicos gene

Manualsnet FAQs

If you want to find out how the PTW9000SNSS GE works, you can view and download the GE PTW9000 PTW9000SNSS Drawer Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for GE PTW9000SNSS as well as other GE manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a GE PTW9000SNSS. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the GE PTW9000 PTW9000SNSS Drawer Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This GE PTW9000 PTW9000SNSS Drawer Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download GE PTW9000 PTW9000SNSS Drawer Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print GE PTW9000 PTW9000SNSS Drawer Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the GE PTW9000 PTW9000SNSS Drawer Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.