GE RAK40 Deflector Installation Instructions PDF

1 of 2
1 of 2

Summary of Content for GE RAK40 Deflector Installation Instructions PDF

STEP 1A On models with straight outdoor coils, mount grills as shown in Figure 1 ensuring the foam gasket is facing away from the chassis. Install two (2) #8 x 3/8 screws per grill to secure.

TOOLS NEEDED 5/16 nut driver 1/4 nut driver

CAUTION Do not use screws longer than 3/8 when mounting

deflector to metal end brackets. Doing so may damage heat exchanger.

Only use this Kit when not using a GE grill. If existing grill has air deflector attached, remove the deflector before mounting grill.

Pub No. 31-30806-3 02-17 GEA

Installation Instructions for your new

Before you begin - Read these instructions completely and carefully. IMPORTANT OBSERVE ALL GOVERNING CODES AND ORDINANCES. Note to Installer Be sure to leave these instructions with the Consumer. Note to Consumer Keep these instructions with your Owners Manual for future reference.

RAK40 Anti recirculation deflectors for Zoneline

PARTS INCLUDED IN KIT Deflector (2) #8 x 3/8 sheet metal screws (4) #8 x 1/2 self tapping screws (2)

STEP 1B On models with L shaped outdoor coils, mount

left hand grill as shown in Figure 1 ensuring the foam gasket is facing away from the chassis. Install two (2) #8 x 3/8 screws on sheet metal end of coil (left side when looking at the back on unit).

Mount right hand grill as shown in figure 2 ensuring the foam gasket is facing away from the chassis. Install two (2) #8 x 1/2 self taping screws in plastic shroud (right side of unit when looking at the back on unit) to secure.

#8 x 3/8 screw (4)

Figure 1

Figure 3

Figure 2

#8 x 1/2 screw (2)

Plastic shroud

TAPE 1A Sur les modles avec des changeurs extrieurs droits, assemblez les grilles comme illustr la Figure 1 en vous assurant que le joint en mousse fait face au ct oppos au chssis. Installez deux (2) vis n 8 x 3/8 po par grille pour raliser linstallation.

OUTILS REQUIS Tournevis douille de 5/16 po Tournevis douille de 1/4 po

ATTENTION Nutilisez pas de vis plus longue que 3/8 po

lorsque vous assemblez le dflecteur des supports dextrmit en mtal. Le cas chant, lchangeur de chaleur pourrait tre endommag.

Utilisez cet ensemble uniquement lorsque vous nutilisez pas de grille GE. Si une grille existante possde un dflecteur dair install, retirez le dflecteur avant dassembler la grille.

Pub No. 31-30806-3 02-17 GEA

Instructions dinstallation pour vos nouveaux dflecteurs antirecirculation

Avant de commencer - Lisez ces instructions attentivement et en entier. IMPORTANT RESPECTEZ TOUS LES CODES ET RGLEMENTS APPLICABLES. Remarque lintention de linstallateur - Assurez-vous de remettre ces instructions au client. Remarque lintention du client Conservez ces instructions avec le manuel du propritaire afin de pouvoir vous y reporter ultrieurement.

RAK40 Pour Zoneline

PICES COMPRISES DANS LENSEMBLE Dflecteur (2) Vis tle n 8 x 3/8 po (4) Vis autotaraudeuses n 8 x 1/2 po (2)

TAPE 1B Sur les modles avec des bobines extrieures

en L , assemblez la grille gauche comme illustr la Figure 1 en vous assurant que le joint en mousse fait face au ct oppos au chssis. Installez deux (2) vis n 8 x 3/8 po sur lextrmit en tle de lchangeur (ct gauche lorsquon regarde depuis larrire de lappareil).

Assemblez la grille droite comme illustr dans la figure 2 en vous assurant que le joint en mousse fait face au ct oppos au chssis. Installez deux (2) vis autotaraudeuse n 8 x 1/2 po dans le dflecteur en plastique (ct droit lorsquon regarde depuis larrire de lappareil) pour installer.

Vis n 8 x 3/8 po (4)

<

Manualsnet FAQs

If you want to find out how the RAK40 GE works, you can view and download the GE RAK40 Deflector Installation Instructions on the Manualsnet website.

Yes, we have the Installation Instructions for GE RAK40 as well as other GE manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Instructions should include all the details that are needed to use a GE RAK40. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the GE RAK40 Deflector Installation Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This GE RAK40 Deflector Installation Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download GE RAK40 Deflector Installation Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print GE RAK40 Deflector Installation Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the GE RAK40 Deflector Installation Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.