GE AHEK10AC Air Conditioner Owner's Manual PDF

1 of 36
1 of 36

Summary of Content for GE AHEK10AC Air Conditioner Owner's Manual PDF

Write the model and serial numbers here:

Model # _________________

Serial # _________________

You can find the rating label on the side of the air conditioner.

GE is a trademark of the General Electric Company. Manufactured under trademark license.

A IR

C O

N D

IT IO

N ERR

O O

M

49-5000531 Rev. 1 08-21 GEA

SAFETY INFORMATION . . . . . . . . .3

OPERATING INSTRUCTIONS . . . .5

CARE AND CLEANING . . . . . . . . . . .7

INSTALLATION INSTRUCTIONS . .8

TROUBLESHOOTING TIPS . . . . . . 13

WIFI SETUP . . . . . . . . . . . . . . . . . . . . . . 14

LIMITED WARRANTY . . . . . . . . . . . 17

CONSUMER SUPPORT . . . . . . . . . . 18

AHEK08AC AHEU08BC AHEK10AC AHEK12AC AHEK14AC

OWNERS MANUAL & INSTALLATION INSTRUCTIONS

ENGLISH/ESPAOL

Before you begin Record the GE module number and password for wifi setup. To locate this information, see page 14.

GE Module Number #____________

Password #____________________

2 49-5000531 Rev. 1

THANK YOU FOR MAKING GE APPLIANCES A PART OF YOUR HOME.

Whether you grew up with GE Appliances, or this is your first, were happy to have you in the family.

We take pride in the craftsmanship, innovation and design that goes into every GE Appliances product, and we think you will too. Among other things, registration of your appliance ensures that we

can deliver important product information and warranty details when you need them.

Register your GE appliance now online. Helpful websites and phone numbers are available in the Consumer Support section of this Owners Manual. You may also mail in the pre-printed registration

card included in the packing material.

49-5000531 Rev. 1 3

IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

SA FETY IN

FO R

M ATIO

N

READ AND SAVE THESE INSTRUCTIONS

WARNING For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

described in this Owners Manual. This air conditioner must be properly installed in accordance with the Installation Instructions before it is used. Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle. Replace immediately all electric service cords that have become frayed or otherwise damaged. A damaged power supply cord must be replaced with a new power supply cord obtained from the manufacturer and not repaired. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

Turn the unit OFF and unplug your air conditioner before cleaning. For your safetydo not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. If the receptacle does not match the plug, the receptacle must be changed out by a qualified electrician.

or to clean, other than those recommended by the manufacturer. The appliance shall be stored in a room without continuously operating ignition sources (for example: open flames, an operating gas appliance or an operating electric heater. Do not pierce or burn refrigerant tubing. Be aware that refrigerants may not contain an odor. Keep ventilation openings clear of obstruction. When handling, installing, and operating the appliance, care should be taken to avoid damage to the refrigerant tubing.

Do not drill holes in the unit. Maintenance, cleaning, and service should only be performed by technicians properly trained and qualified in the use of flammable refrigerants. GE Appliances does not support any servicing of the air conditioner. Dispose of air conditioner in accordance with Federal and Local Regulations. Flammable refrigerants require special disposal procedures. Contact your local authorities for the environmentally safe disposal of your air conditioner.

WARNING Risk of Fire or Explosion. This unit contains flammable refrigerant. Additional safety precautions must be followed.

4 49-5000531 Rev. 1

SA FE

TY IN

FO R

M AT

IO N IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

READ AND SAVE THESE INSTRUCTIONS

WARNING USE OF EXTENSION CORDS RISK OF FIRE. Could cause serious injury or death.

Conditioner. with this Window Air Conditioner.

HOW TO CONNECT ELECTRICITY Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded. DO NOT use an adapter plug with this appliance. The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance. Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button while plugged into the outlet. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. Where a 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires. See the Installation Instructions, Electrical Requirements section for specific electrical connection requirements.

49-5000531 Rev. 1 5

Controls Features and appearance will vary. Lights beside the touch pads on the air conditioner control panel indicate the selected settings.

Remote Control

Air Conditioner Controls

Sleep

AutoSpeed

Mode

WiFiMed

Cool

High

Fan Eco Filter

1 2 3 4

5

8 7

9

1. Power Pad Turns air conditioner on and off. When turned on, the display will show the Set temperature.

2. Display Shows the Set temperature or time remaining on the Delay timer. Shows the Set temperature while setting the temperature in Cool or Eco modes.

3. Temp and Delay Increase + /Decrease - Pads

be set in Cool and Eco mode. 4. Mode Pad

Fan Only, Cool, or Eco mode.

5. Fan Speed Pad In Cool or Eco Auto, High, Med or Low on the unit. In Fan Only High, Med, or Low on the unit.

6. Delay Pad (set by remote control only) Delay ONWhen the air conditioner is off, it can be set to automatically come on in 1 to 24 hours at its previous mode and fan settings. Delay OFFWhen the air conditioner is on, it can be set to automatically turn off in 1 to 24 hours. How to set: Press the Delay pad on the remote control. Each touch of the Increase + / Decrease - pads on the remote control will set the timer in 1-hour intervals. To review the remaining time on the Delay timer, press the Delay Increase + / Decrease - pads on the remote control to set a new time if desired. To cancel the timer, press Decrease pad on the remote control until the set time is zero.

7. Sleep Pad (set by air conditioner controls only) The SLEEP mode sets the unit to gradually change settings over an 8 hour period to allow for some increased energy efficiency during sleep hours. The SLEEP mode is available only in COOL and FAN only settings. Press the SLEEP mode pad and its light will illuminate. The fan indicator will stay at the same setting but the air conditioner will automatically change the FAN speed to low in either COOL or FAN only mode. In FAN only mode, the fan will stay in the LOW speed setting for 8 hours. After 8 hours, the air conditioner will resume the settings that were in place before the SLEEP mode pad was pressed. In COOL mode, the fan will stay in the LOW speed setting for 8 hours from the time the SLEEP mode pad was pressed. The air conditioner will also raise the set point 2F in 30 minutes and 2F more in another 30 minutes where it will remain for the next 7 hours. After 8 hours, the air conditioner will resume the settings that were in place before the SLEEP mode pad was pressed. While the unit is in SLEEP mode, pressing any pad will return it to the settings that were in place before the SLEEP mode pad was pressed.

8. Filter Reset Pad This feature automatically notifies you that the air filter must be cleaned. The indicator light will come on after 250 hours of operation. Clean the air filter (refer to page 7), place it back in the front panel, and press the Filter Reset pad. The light will go off.

9. WiFi Connect Pad Enables connection of the air conditioner to the home WiFi. Download App for details at: www.GEAppliances.com/connect.

Solid light indicates WiFi connected Blinking light indicates connecting See Appliance Communication section in this manual

Power

Speed

Mode

Eco Delay

1

4

5

6

3

U SIN

G TH

E A IR

C O

N D

ITIO N

ER : C

ontrols

6 49-5000531 Rev. 1

Using the Air Conditioner

Remote Control To ensure proper operation, aim the remote control at the signal receiver on the air conditioner.

The remote control signal has a range of up to 20 feet.

Make sure nothing is between the air conditioner and the remote control that could block the signal.

Make sure batteries are fresh and installed correctly as indicated on the remote control.

Do Not Operate in Freezing Outdoor Conditions This cool-only air conditioner was not designed for freezing outdoor conditions.

It must not be used when the outdoor temperature is below freezing (32F).

Cool Mode Low, Med, High or Speed for

Temperature Increase + / Decrease - pads to set the desired temperature between 64F and 86F in 1F increments.

An electronic thermostat is used to maintain the room temperature. The compressor will cycle on and off to keep the room at the set level of comfort. Set the thermostat at a lower number and the indoor air will become cooler. Set the thermostat at a higher number and the indoor air will become warmer.

NOTE: If the air conditioner is off and is then turned on while set to a Cool setting or if turned from a fan setting to a Cool setting, it may take approximately 3 minutes for the compressor to start and cooling to begin. Cooling Descriptions For Normal CoolingSelect the Cool mode and High or Med fan with a middle set temperature. For Maximum CoolingSelect the Cool mode and High fan with a lower set temperature. For Quieter and Nighttime CoolingSelect the Cool mode and Low fan with a middle set temperature.

Eco Mode Controls the fan.

ONThe fan will cycle on and off with the compressor. This may result in wider variations of room temperature and humidity. NOTE: the fan may continue to run for a short time or may pulse intermittently after the compressor cycles off to sample the room air.

OFFThe fan runs all the time, while the compressor cycles on and off.

Fan Only Mode

to provide air circulation and filtering without cooling. Since fan-only settings do not provide cooling, a Set temperature cannot be entered. The room temperature will appear in the display.

Auto Fan Mode Set to Auto for the fan speed to automatically set to the speed needed to provide optimum comfort settings with the set temperature.

If the room needs more cooling, the fan speed will automatically increase. If the room needs less cooling, the fan speed will automatically decrease.

Control Panel Lights On/Off Feature This air conditioner has a control panel lights on/off feature where its lights will turn off when there is no activity with the controls for over one minute. To wake up the controls, press any pad on the controls and the lights will come on to show the previous settings.

To turn this feature off, press and hold the SLEEP pad, on the unit, for 5 seconds. The unit will beep to signal the successful toggle of the feature on and off.

U SI

N G

T H

E A

IR C

O N

D IT

IO N

ER

49-5000531 Rev. 1 7

Using the Air Conditioner Air Direction

Care and Cleaning Grille and Case Turn the air conditioner off and remove the plug from the wall outlet before cleaning.

To clean, use water and a mild detergent. Do not use bleach or abrasives.

Outdoor Coils The coils on the outdoor side of the air conditioner should be checked regularly. If they are clogged with dirt or soot, they may be professionally cleaned.

U SIN

G TH

E A IR

C O

N D

ITIO N

ER /C

A R

E A N

D C

LEA N

IN G

Air Filter The air filter behind the front grille should be checked and cleaned at least every 30 days or more often if necessary.

To remove:

Open the inlet grille by pulling downward on the tabs at the top upper corners of the inlet grille until the grille is in a 45 position. Remove the filter.

Clean the filter with warm, soapy water. Rinse and let the filter dry before replacing it. Do not clean the filter in a dishwasher.

CAUTION DO NOT operate the air conditioner without a filter because dirt and lint will clog it and reduce performance.

How to Insert the Batteries in the Remote Control 1. Remove the battery cover by sliding it according to the

arrow direction. 2. Insert new batteries, making sure that the (+) and ()

of battery are installed correctly. 3. Reattach the cover by sliding it back into position.

NOTES:

rechargeable batteries.

system is not going to be used for a long time.

(carbon-zinc) or rechargeable (ni-cad, ni-mh, etc) batteries.

8 49-5000531 Rev. 1

Installation Instructions

BEFORE YOU BEGIN Read these instructions completely and carefully.

IMPORTANT Save these instructions for local inspectors use.

IMPORTANT Observe all governing codes and ordinances.

Note to Installer Be sure to leave these instructions with the Consumer.

Note to Consumer Keep these instructions for future reference.

Skill level Installation of this appliance requires basic mechanical skills.

Completion time Approximately 1 hour We recommend that two people install

this product. Proper installation is the responsibility

of the installer. Product failure due to improper installation is not

covered under the Warranty.

installation procedures as described in these instructions when installing this air conditioner.

Questions? Visit our Website at: GEAppliances.com

These models require a 115/120-volt AC, 60-Hz grounded outlet protected with a 15-amp time-delay fuse or circuit breaker.

The 3-prong grounding plug minimizes the possibility of electric shock hazard. If the wall outlet you plan to use is only a 2-prong outlet, it is your responsibility to have it replaced with a properly grounded 3-prong wall outlet.

CAUTION Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. Do not change the plug on the power cord of this air conditioner. Aluminum house wiring may present special problemsconsult a qualified electrician.

ELECTRICAL REQUIREMENTS

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button while plugged into the outlet. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

ELECTRICAL REQUIREMENTS (cont)

TOOLS YOU WILL NEED

Phillips head screwdriver

Ruler or tape measurePencil

Level Scissors or knife

IN ST

A LL

AT IO

N IN

ST R

U C

TI O

N S

49-5000531 Rev. 1 9

IN STA

LLATIO N

IN STR

U C

TIO N

S Installation Instructions

DELAY

MODE

ON/OFF

SPEED

TEMP/TIME

TEMP/TIME

+ -

Side Curtain Frame

Type B (9)

Foam top window gasket

Side Curtain (2)

Top mounting rail

Air conditioner

Window locking bracket (1)

Side Brackets (2)

PARTS INCLUDED (Appearance may vary)

Remote Control

Bottom Seal and Side Seals (3)

Left Right

AHY10 / AHY12 / AHY14: Type A (4) AHY08: Type A (3)

Side Curtain Foam (2)

Power

Speed

Mode

Eco Delay

10 49-5000531 Rev. 1

Installation Instructions

3. PREPARE THE AIR CONDITIONER A. Install the top mounting rail with 4 Type A

screws (AHTK10 / AHTK12 / AHTK14) or 3 Type A screws (AHTK08) from the outside of the case.

B. Apply the weather seals provided to the bottom, top and sides of the window to the seal around the perimeter of the air conditioner.

C. Slide the side curtain panels into the side panel rails.

D. Slide left and right side curtain frames into top and bottom rails. Make sure that side curtains snap into side of the frames.

1. WINDOW REQUIREMENTS These instructions are for a standard

double-hung window. You will need to modify them for other types of windows.

The air conditioner can be installed without the side curtain panels if needed to fit in a narrow window. See the window opening dimensions.

All supporting parts must be secured to firm wood, masonry or metal.

The electrical outlet must be within reach of the power cord.

Follow the dimensions in the table and illustration for your model.

2. STORM WINDOW REQUIREMENTS A storm window frame will not allow the air conditioner to tilt toward the outside, and will

attach a piece of wood to the sill. WOOD PIECES WIDTH: 2 LENGTH: Long enough to fit inside the window frame. THICKNESS: To determine the thickness, place

than the top of the storm window frame or the vinyl frame. Attach securely with nails or screws provided by the installer.

A

(With side curtain panels) B

than storm window frame

Storm window frame

Wood

Sill

than vinyl frame (on some windows)

Vinyl frame

Models A B

AHEK10AC

AHEK12AC

AHEK14AC

Cut and apply weather strip to front and bottom edge of window frame.

Cut and apply weather strip to back edge of the window sill.

Cut and apply a weather strip to side of the curtain frame (one on each side).

Top Mounting rail

Bottom mounting rail

Snap curtain into frame

IN ST

A LL

AT IO

N IN

ST R

U C

TI O

N S

49-5000531 Rev. 1 11

Installation Instructions 5. SECURE AIR CONDITIONER

A. Loosen the screw on the right hand side of the air conditioner near the bottom.

B. Slide a side bracket over the screw so that the bracket is resting on the window sill. Tighten the screw.

C. window sill through the holes in the side bracket.

the window sill.

D. Repeat the side bracket installation on the left side.

E. Measure and cut adhesive foam backed sheet. Apply over side curtain and frame.

4. INSTALL THE AIR CONDITIONER IN THE WINDOW

A. Mark the center of the window. Set the air conditioner in the window so that is it centered. Place the air conditioner so that front edge of the bottom mounting rail is against the back edge of the sill.

B. Bring the window down so that the front edge of the top mounting is in front of the window. Make sure that the air conditioner is level or tilting slightly to the outside.

C. Extend the curtain panels until they fill the window. Mark the location of the holes in each

panels in place.

Type B screws

Side curtain foam

Weather seals

IN STA

LLATIO N

IN STR

U C

TIO N

S

12 49-5000531 Rev. 1

Installation Instructions 6. INSTALL WINDOW LOCK

BRACKET AND FOAM TOP WINDOW GASKET

bracket on top of the bottom window.

A. CAUTION To prevent broken glass or damage to windows, on vinyl or other similarly constructed windows, attach the window locking bracket to the window

screw.

B. Cut the foam top window gasket to the window width.

C. Stuff the foam between the glass and the window to prevent air and insects from getting into the room.

NOTE: If the gasket supplied does not fit your window, obtain appropriate material locally to provide a proper installation seal.

Wood

Vinyl

IN ST

A LL

AT IO

N IN

ST R

U C

TI O

N S

49-5000531 Rev. 1 13

Troubleshooting Tips... Before you call for service Save time and money! Review the charts on the following pages first and you may not need to call for service.

Problem Possible Cause What To Do Air conditionerdoes not start.

The unit is unplugged. Make sure the air conditioner plug is pushed completely into the outlet.

The fuse is blown/circuit breaker is tripped.

Check the house fuse/circuit breaker box and replace the fuse or reset the breaker.

Power Failure. The unit will automatically restart in the setting last used after the power is restored.

There is a protective time delay (approximately 3 minutes) to prevent tripping of the compressor overload. For this reason, the unit may not start normal cooling for 3 minutes after it is turned back on.

The current interrupter device is tripped.

Press RESET button located on the power cord plug.

If the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

Air conditioner does not cool as it should.

Indoor airflow is restricted. Make sure there are not curtains, blinds or furniture blocking the front of the air conditioner.

The temp control may not be set properly.

Turn the temperature control to a higher number.

The air filter is dirty. Clean the filter at least every 30 days. See Care and Cleaning section.

The room may have been hot. When the air conditioner is first turned on, you need to allow time for the room to cool down.

Cold air is escaping. Check for open furnace registers and cold air returns.

Cooling coils have iced up.

Air conditioner freezing up Ice blocks the air flow and stops the air conditioner from cooling the room.

Set the mode control to High Fan or High Cool with the temperature setting as high as it can be set.

Water drips outside Hot, humid weather. This is normal. Water drips inside The air conditioner is not tilted to

the outside. For proper disposal, make sure the air conditioner slants slightly from the case front to the rear.

Water collects in base pan Moisture removed from air and drain into base pan.

This is normal for a short period in areas with little humidity; normal for a longer period in very humid areas.

TR O

U B

LESH O

O TIN

G TIPS

14 49-5000531 Rev. 1

TR O

U B

LE SH

O O

TI N

G T

IP S

/ W IF

I S ET

U P

WiFi Setup GE Appliances SmartHQ (for customers in the United States) GE Appliances SmartHQ Enabled*. If your Air Conditioner (AC) has a Connected Appliance Information label located on the outside as shown below, your AC is GE Appliances SmartHQ Enabled. A WiFi communication card is built into the product allowing it to communicate with your smart phone for remote monitoring, control and notifications. Please visit www.GEAppliances.com/connect to learn more about connected appliance features, and to learn what connected appliance apps will work with your smart phone.

WiFi Connectivity: For assistance with the appliance or the ConnectPlus network connectivity (for models that are WiFi enabled or WiFi optional), please call 1-800-220-6899.

Network: GE_MODULE_XXXX PASSWORD: XXXXXXXX MAC ID: XX-XX-XX-XX-XX-XX

CONTAINS FCCID: 2ALD3-MKQTWIFI11 CONTAINS IC: 22987-MKQTWIFI11

or when the humidity is high. This design feature helps remove moisture and improve efficiency.

outdoor sideof the unit.

You can reduce this noise by removing the subbase water plug.

To ensure maximum efficiency it is recommended to check to ensure the rubber drain plug is properly inserted. This plug may be removed during operation to minimize water in the back of the unit; however, removing it will lower the efficiency of your unit.

NOTE: Do not drill hole in the base pan.

Subbase Water Plug

Normal Operating Sounds

49-5000531 Rev. 1 15

WiFi Setup W

IFI SETU P

How it Works Download the GE Appliances App

conditioner to WiFi Once connected, use the app to turn down your air conditioner as you leave work.

CHANGE TEMP TO 65

Getting Started To connect your room air conditioner, youll need the GE Appliances App. The app will walk you through the connection process. Download the app from iTunes or Google Play.

All connected appliace data is held in strict accordance with the GE Appliances Connected Data Privacy Policy. Visit geappliances.com/privacy/privacy_policy_ connected to view this policy. Questions about SmartHQ Get answers you need about setting up WiFi appliances and connecting to your home network in our support articles.

Visit products.geappliances.com/appliance/gea- support-search-content to view wifi connect room air conditioner support articles.

REGULATORY INFORMATION

FCC/IC Compliance Statement: This device complies with Part 15 of the FCC Rules.

1. This device may not cause harmful interference. 2. This device must accept any interference received,

including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and

receiver. Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected. Consult the dealer or an experienced radio/television

technician for help. Labelling: Changes or modifications to this unit not expressly approved by the manufacturer could void the users authority to operate the equipment. *Select Models Only

This product has Wi-Fi capability and requires Internet connectivity and a wireless router to enable interconnection with an Energy Management System, and/or with other external devices, systems or applications.

16 49-5000531 Rev. 1

Notes

49-5000531 Rev. 1 17

LIM ITED

W A

R R

A N

TY GE Appliances Air Conditioner Limited Warranty

EXCLUSION OF IMPLIED WARRANTIES - Your sole and exclusive remedy is product repair as provided in this Limited Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law.

This limited warranty is extended to the original purchaser and any succeeding owner for products purchased

Servicer is not available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized GE Appliances Service location for service. In Alaska, the limited warranty excludes the cost of shipping or service calls to your home. Some states do not allow the exclusion or limitation of incidental or consequential damages. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights are, consult your local or state consumer affairs office or your states Attorney General.

Warrantor: GE Appliances, a Haier company

Louisville, KY 40225

information regarding operating instructions and user controls.

problem, or if the air conditioner is of improper capacity, contact your dealer or installer. You are responsible for providing adequate electrical connecting facilities.

to the product or due to unreasonable use including failure to provide reasonable and necessary maintenan e.

breakers.

protected.

supply voltage, accident, fire, floods or acts of God.

possible defects with this air conditioner.

What Will Not Cover:

For The Period Of: Will Replace: One Year From the date of the original purchase

Replacement, repair, or refund of the original retail price for any product which fails due to a defect in materials or workmanship. If the unit is exchanged, the replacement unit is warranted for the remainder of your products original one-year warranty period. GE Appliances will, at its sole discretion, replace the product with a product of the same or comparable functionality and quality or refund the original retail price.

Properly pack your unit. We recommend using the original carton and packing materials.

purchased.

Include in the package a copy of the sales receipt or other evidence of date of original purchase. Also print your name and address and a description of the defect.

your model and serial number.

replacement process.

date of purchase, model and serial number.

your home to recover the product.

Please return all requested materials (postage pre-paid) in the carton provided. Please include a description of the defect.

refund within 7 to 10 business days after your package is received.

In Order to Make a Warranty Claim During the Remainder of the One-Year Warranty:

Staple your receipt here. Proof of the original purchase date is needed to obtain service under the w

arranty.

18 49-5000531 Rev. 1

Consumer Support C

O N

SU M

ER S

U PP

O R

T

GE Appliances Website Have a question or need assistance with your appliance? Try the GE Appliances Website 24 hours a day, any day of the year! You can also shop for more great GE Appliances products and take advantage of all our on-line support services designed for your convenience. GEAppliances.com

Register Your Appliance Register your new appliance on-line at your convenience! Timely product registration will allow for enhanced communication and prompt service under the terms of your warranty, should the need arise. You may also mail in the pre-printed registration card included in the packing material. GEAppliances.com/register

Parts and Accessories Individuals qualified to service their own appliances can have parts or accessories sent directly to their homes (VISA, MasterCard and Discover cards are accepted). Order on-line today 24 hours every day. GEApplianceparts.com or by phone at 877.959.8688 during normal business hours. Instructions contained in this manual cover procedures to be performed by any user. Other servicing generally should be referred to qualified service personnel. Caution must be exercised, since improper servicing may cause unsafe operation.

Contact Us If you are not satisfied with the service you receive from GE Appliances, contact us on our Website with all the details including your phone number, or write to: General Manager, Customer Relations | GE Appliances, Appliance Park | Louisville, KY 40225 GEAppliances.com/ge/service-and-support/contact.htm

A C

C O

N D

IC IO

N A

D O

R ES

D E

A IR

E P

A R

A S

A LA

INFORMACIN DE SEGURIDAD . . .3

INSTRUCCIONES DE OPERACIN . . . . . . . . . . . . . . . . . . .5

CUIDADO Y LIMPIEZA . . . . . . . . . . . . .7

INSTRUCCIONES DE INSTALACIN . . . . . . . . . . . . . . . . . .8

CONSEJOS PARA LA SOLUCIN DE PROBLEMAS . . . . . . . . . . . . . . . . . . 13

CONFIGURACIN WIFI . . . . . . . . . 14

GARANTA LIMITADA . . . . . . . . . . 17

SOPORTE AL CLIENTE . . . . . . . . . . . 18

GE es una marca registrada de General Electric Company. Fabricado bajo licencia de marca.

Escriba los nmeros de modelo y de serie aqu:

N de Modelo ____________

N de Serie ______________

Estos nmeros se encuentran en una etiqueta al costado del acondicionador de aire.

49-5000531 Rev. 1 08-21 GEA

AHEK08AC AHEU08BC AHEK10AC AHEK12AC AHEK14AC

MANUAL DEL PROPIETARIO Y INSTRUCCIONES DE INSTALACIN

Antes de comenzar Registre el nmero de mdulo de GE Appliances y su contrasea para la configuracin del wifi. Para ubicar esta informacin, consulte la pgina 14.

# mdulo de GE Appliances ___________

# de Contrasea:_____________________

2 49-5000531 Rev. 1

GRACIAS POR HACER QUE GE APPLIANCES SEA PARTE DE SU HOGAR.

Ya sea que haya crecido usando GE Appliances, o que sta es su primera vez, nos complace tenerlo en la familia.

Sentimos orgullo por el nivel de arte, innovacin y diseo de cada uno de los electrodomsticos de GE Appliances, y creemos que usted tambin. Entre otras cosas, el registro de su electrodomstico

asegura que podamos entregarle informacin importante del producto y detalles de la garanta cuando los necesite.

Registre su electrodomstico GE ahora a travs de Internet. Sitios Web y nmeros telefnicos tiles estn disponibles en la seccin de Soporte para el Consumidor de este Manual del Propietario.

Tambin puede enviar una carta en la tarjeta de inscripcin preimpresa que se incluye con el material embalado.

49-5000531 Rev. 1 3

Para su seguridad, siga las instrucciones de este manual a fin de minimizar riesgos de incendio, descargas elctricas o heridas personales.

como se describe en el Manual del Propietario.

apropiada de acuerdo con las Instrucciones de Instalacin antes de ser usado.

el cable de corriente. Siempre tome su enchufe de manera firme y empuje el mismo hacia afuera del receptculo.

cable del servicio de corriente que est daado deber ser reemplazado por uno nuevo provisto por el fabricante, y

abrasin sobre su extensin o en cualquiera de sus enchufes o extremos.

acondicionador de aire antes de usar el mismo.

combustibles, gasolina u otros vapores o lquidos inflamables cerca de ste u otro electrodomstico.

mismo deber ser realizado por un electricista calificado.

ADVERTENCIA

para limpiar, no use ningn mtodo que no sea el recomendado por el fabricante.

sala donde no haya fuentes de encendido continuas

que funcione a gas o un calefactor que funcione a

presente que los refrigerantes no deben tener olor.

obstrucciones.

deber tener cuidado para evitar daar la tubera del refrigerante.

debern ser realizados por tcnicos adecuadamente entrenados y calificados en el uso de refrigerantes inflamables.

acondicionador de aire.

Regulaciones Federales y Locales. Los refrigerantes inflamables requieren procedimientos de descarte especficos. A fin de descartar su acondicionador de aire de forma ambientalmente segura, comunquese con las autoridades locales.

Riesgo de Incendio o Explosin. Esta unidad contiene refrigerante inflamable. Se deben seguir las precauciones adicionales de seguridad.ADVERTENCIA

LEA Y GUARDE ESTAS INSTRUCCIONES

INFORMACIN IMPORTANTE DE SEGURIDAD LEA TODAS LAS INSTRUCCIONES ANTES DE USAR IN

FO R

M A

C I

N D

E SEG U

R ID

A D

4 49-5000531 Rev. 1

LEA Y GUARDE ESTAS INSTRUCCIONES

INFORMACIN IMPORTANTE DE SEGURIDAD LEA TODAS LAS INSTRUCCIONES ANTES DE USAR

USO DE PROLONGADORES RIESGO DE INCENDIO. Podra ocasionar lesiones graves o la muerte.

Ventana.

adaptadores para mltiples tomacorrientes con este Acondicionador de Aire de Ventana.

CMO CONECTAR LA ELECTRICIDAD

electrodomstico debe estar adecuadamente conectado a tierra. NO use un enchufe adaptador con este electrodomstico. El cable de corriente de este electrodomstico contiene un

elctricas por parte del mismo. El cable de corriente incluye un interruptor de corriente. Se brinda un botn de evaluacin y reinicio en la caja del enchufe. El dispositivo deber ser evaluado en forma peridica, presionando primero el botn TEST RESET mientras se encuentre enchufado al tomacorriente. Si el botn TEST RESET permanece en su posicin, deje de usar el acondicionador de aire y comunquese con un tcnico calificado del servicio.

Contrate a un electricista calificado para que controle el tomacorriente y el circuito elctrico para asegurar que el enchufe est correctamente conectado a tierra. En caso de contar con un tomacorriente de pared de 2 cables, es su responsabilidad y obligacin reemplazarlo por un tomacorriente de pared de 3 cables correctamente conectado a tierra. El acondicionador de aire debera estar siempre conectado a un enchufe especfico con un ndice de voltaje equivalente al que figura en su etiqueta de caractersticas tcnicas. Esto garantiza el mejor funcionamiento y adems previene la sobrecarga de los circuitos del hogar, lo cual podra ocasionar riesgos de incendio debido al recalentamiento de cables. Para conocer los requisitos especficos de la conexin elctrica, consulte las Instrucciones de Instalacin, Requisitos Elctricos.

ADVERTENCIA

IN FO

R M

A C

I N

D E

SE G

U R

ID A

D

49-5000531 Rev. 1 5

Controles Las funciones y la apariencia podrn variar. Las luces al lado de las teclas tctiles del panel de control del acondicionador de aire indican las configuraciones seleccionadas.

Control Remoto Controles del Acondicionador de Aire

La luz slida indica que el Wi-Fi est conectado La luz parpadeante indica que se est conectando Consulte la seccin de Comunicacin del electrodomstico de este manual

1. Tecla de Power (Encendido) Apaga y prende el acondicionador de aire. Al encenderse, la

2. Pantalla

Sincronizador de retardo. Muestra la temperatura Definida al configurar la temperatura en los modos Cool (Fro) o de Eco (Ahorro de energa). La luz de Ajuste se encender durante la configuracin.

3. Teclas de Temp Aumento + /Reduccin -

el modo Cool (Fro) o Eco (Ahorro de energa). La luz de Ajuste se encender durante la configuracin.

4. Tecla de Mode (Modo) Cool

(Fro) o Eco (Ahorro de energa). 5. Teclas de Fan Speed (Velocidad del ventilador)

En modo Cool (Fro) o Eco (Ahorro de energa) mismas para configurar la velocidad del ventilador en Auto, High (Alto), Med (Medio), o Low (Bajo) en la unidad. En modo Teclas de Fan Speed (Velocidad del ventilador)

en High (Alto), Med (Medio), o Low (Bajo) en la unidad.

6. Tecla de Retraso (establecido solo por lo Control Remoto)

Delay ON (Retraso Encendido)Cuando el acondicionador de aire se encuentre apagado, se podr configurar para que se encienda automticamente en un perodo de entre 1 y 24 horas en el modo y configuraciones del ventilador previas. Delay OFF (Retraso del Apagado)Cuando el acondicionador de aire se encuentre encendido, se podr configurar automticamente para que se apague en un perodo de entre 1 y 24 horas. Cmo configurar: Presione la tecla Delay Cada vez que presione las teclas Increase (Incrementar) + / Decrease (Reducir) - de control remoto se ajustar el temporizador por intervalos de 1 hora. Para revisar el tiempo restante en el temporizador de Delay (Retraso), presione la tecla Delay (Retraso) de control

de control remoto para configurar un tiempo nuevo si as lo desea. Para cancelar el temporizador, presione la tecla reducir en el control remoto, hasta que el tiempo configurado sea cero.

7. Tecla de Sleep (Dormir) (establecido solo por los controles del acondicionador de aire) El modo SLEEP que gradualmente cambie las configuraciones en un perodo de 8 horas, a fin de permitir cierto incremento de eficiencia energtica durante las horas de inactividad. El modo SLEEP configuraciones COOL FAN Presione la tecla del modo SLEEP encender. El indicador del ventilador permanecer en la misma configuracin, pero el acondicionador de aire cambiar automticamente la velocidad del ventilador a LOW COOL FAN

En el modo FAN permanecer en la configuracin de velocidad LOW acondicionador de aire reanudar las configuraciones que fueron ajustadas antes de que se presionara la tecla del modo SLEEP En el modo COOL en la configuracin de velocidad LOW 8 horas desde el momento en que la tecla del modo SLEEP de aire tambin elevar el punto de configuracin 2F en 30 minutos y 2F ms en otros 30 minutos, donde permanecer durante las siguientes 7 horas. Luego de 8 horas, el acondicionador de aire reanudar las configuraciones que fueron ajustadas antes de que se presionara la tecla del modo SLEEP Mientras la unidad se encuentre en el modo SLEEP

configuraciones que fueron ajustadas antes de que se presionara la tecla del modo SLEEP

8. Tecla de Reinicio del Filtro Esta funcin automtica le notifica que el filtro de aire debe ser limpiado. La luz indicadora se encender luego de 250

la tecla Filter Reset

9. WiFI Connect WiFi Connect le permite la conexin del acondicionador

Aplicacin en www.GEAppliances.com/connect.

Sleep

AutoSpeed

Mode

WiFiMed

Cool

High

Fan Eco Filter

1 2 3 4

5

8 7

9

U SO

D EL A

C O

N D

IC IO

N A

D O

R D

E A IR

E: C ontroles

Power

Speed

Mode

Eco Delay

1

4

5

6

3

6 49-5000531 Rev. 1

Uso del Acondicionador de Aire

Control Remoto

receptor de seal del acondicionador de aire.

20 pies.

acondicionador de aire y el control remoto que pudieran bloquear la seal.

correctamente, como se indica en el control remoto.

No Utilizar con Condiciones Climticas Exteriores de Congelacin Este acondicionador de aire slo fro no fue diseado para uso con condiciones climticas exteriores de temperatura helada. temperatura helada.

Modo Cool (Fro) Cool (Fro) a Low (Bajo), Med (Medio),

High (Alto) o Auto Fan Speed (Velocidad de ventilador automtica) Temperature (Temperatura) Aumento + / Reduccin - para ajustar a la temperatura deseada entre 64F y 86F en incrementos de 1F.

Se usa un termostato electrnico para mantener la temperatura ambiente. El compresor har ciclo entre apagado y encendido para mantener la habitacin a la temperatura deseada. Ajuste el termostato a un nmero menor y el aire interno se enfriar ms. Si lo ajusta a un nmero mayor, la temperatura del aire interno se calentar ms.

NOTA: Si el acondicionador de aire est apagado y luego se

pasa de una configuracin de ventilacin a una configuracin de

3 minutos comenzar y que comience la refrigeracin. Descripciones de enfriamiento Para enfriamiento normalSeleccione el modo Cool (Fro) y ventilador High (Alto) o Med (Medio) con una temperatura de ajuste media. Para enfriamiento mximoSeleccione el modo Cool (Fro) y ventilador High (Alto) con una temperatura de ajuste menor. Para enfriamiento silencioso y enfriamiento nocturno Seleccione el modo Cool (Fro) y ventilador Low (Bajo) con una temperatura de ajuste media.

Eco (Modo de ahorro de energa) Controla el ventilador. ON (ENCENDIDO)El ventilador har un ciclo de encendido y apagado con el compresor. Este resulta en variaciones mayores en la temperatura de la habitacin y en la humedad. NOTA: es posible que el ventilador contine funcionando durante un perodo de tiempo corto o que titile de forma intermitente cuando el compresor finalice su ciclo para probar el aire de la sala.

OFF (APAGADO)El ventilador funciona todo el tiempo, mientras que el compresor pasa por los ciclos de encendido y apagado.

Modo de Fan Only (Solo ventilador)

de brindar una circulacin de aire y filtrado sin enfriamiento.

brindan enfriamiento, no se podr ingresar una temperatura configurada. La temperatura del ambiente aparecer en la pantalla.

Velocidad Automtica del Ventilador Configure en Auto (Automtica) para que la velocidad del ventilador se configure de forma automtica en la velocidad necesaria para brindar ajustes de confort ptimos con la temperatura configurada.

Si se necesita ms fro en la habitacin, la velocidad del ventilador se incrementar de forma automtica. Si se necesita ms fro en la habitacin, la velocidad del ventilador se reducir de forma automtica.

Funcin de Luces Encendidas/ Apagadas del Panel de Control Este acondicionador de aire cuenta con una funcin de panel de control de luces encendidas/ apagadas, donde dichas luces se apagarn cuando no haya actividad en los controles por ms de un minuto. Para reactivar los controles, presione cualquier tecla de los controles y las luces se iluminarn para mostrar las configuraciones previas.

Para desactivar esta funcin, mantenga presionada la tecla

unidad emitir un pitido para sealizar que la funcin fue encendida o apagada con xito.

U SO

D EL

A C

O N

D IC

IO N

A D

O R

D E

A IR

E

49-5000531 Rev. 1 7

Uso del Acondicionador de Aire Direccin del Aire

izquierda o derecha. Incline la rejilla para hacer ajustes hacia arriba o abajo.

Cuidado y limpieza Parrilla y Caja Apague el acondicionador de aire y retire el enchufe del tomacorriente antes de limpiar. blanqueadores ni abrasivos.

Filtro de Aire El filtro de aire que se encuentra detrs de la rejilla frontal se debe revisar y limpiar por lo menos cada 30 das o con una frecuencia mayor, si fuera necesario.

Para retirar:

Abra la rejilla de entrada empujando hacia abajo las lengetas en las esquinas superiores de la rejilla de entrada, hasta que la rejilla se encuentre en una posicin de 45. Retire el filtro.

Limpie el filtro con agua caliente y jabn. Enjuague y deje

lavavajillas.

PRECAUCIN aire sin un filtro, ya que la suciedad y las pelusas producirn atascamientos y reducirn su funcionamiento.

Bobinas Exteriores Las bobinas del lado exterior del acondicionador de aire se debern controlar de forma regular. Si se encuentran atascadas con tierra u holln, debern ser limpiadas por un profesional.

U SO

D EL A

C O

N D

IC IO

N A

D O

R D

E A IR

E / C U

ID A

D O

Y LIM PIEZACmo insertar las pilas en el control remoto

1. Retire la cubierta de la pila deslizndola de acuerdo con la direccin de la flecha.

2. Inserte pilas nuevas cerciorndose de que los polos

3. Coloque la cubierta otra vez deslizndola en su lugar.

NOTAS:

por un perodo prolongado.

8 49-5000531 Rev. 1

Instrucciones de instalacin

ANTES DE INICIAR Lea estas instrucciones completa y cuidadosamente.

IMPORTANTE Guarde estas instrucciones para uso del inspector local.

IMPORTANTE cdigos y rdenes de ley.

Nota al instalador instrucciones con el consumidor.

Nota al consumidor para referencia futura.

Nivel de destreza requiere de destrezas mecnicas bsicas.

Tiempo de ejecucin Aprox. 1 hora Recomendamos dos personas para la instalacin de

este producto. La instalacin apropiada es la responsabilidad del

instalador. La falla del producto debido a una instalacin

inadecuada no est cubierta por la garanta.

todas las piezas suministradas y usar procedimientos adecuados de instalacin.

Preguntas? Visite nuestra pgina en la red en: GEAppliances.com

Algunos modelos requieren tomacorrientes de

conectados a tierra, protegidos con un fusible de dilatacin de tiempo de 15 amperios o un cortacircuitos.

El enchufe de tres pas con conexin a tierra minimiza la posibilidad de descargas elctricas. Si el tomacorriente de la pared que usted planea usar solamente tiene 2 tomas, es su responsabilidad hacer que un tcnico lo reemplace por uno de tres tomas con conexin a tierra.

PRECAUCIN

acondicionador de aire. Los cables caseros de aluminio podran presentar problemas especiales. Consulte a un tcnico electricista calificado.

REQUISITOS ELCTRICOS

El cable de alimentacin incluye un dispositivo para interrupcin de corriente. Se incluye un botn de prueba y de reinicio en el dispositivo. El dispositivo debe ponerse

de TEST RESET encuentra enchufado al tomacorriente. Si el botn TEST no se dispara o si el botn RESET no queda enganchado, deje de utilizar el acondicionador de aire y comunquese con un tcnico calificado.

REQUISITOS ELCTRICOS(CONT)

HERRAMIENTAS QUE NECESITAR

Lpiz

Tijeras o cuchilla

IN ST

R U

C C

IO N

ES D

E IN

ST A

LA C

I N

49-5000531 Rev. 1 9

IN STR

U C

C IO

N ES D

E IN STA

LA C

I N

Instrucciones de instalacin

DELAY

MODE

ON/OFF

SPEED

TEMP/TIME

TEMP/TIME

+ -

Junta de gomaespuma de la parte superior de

la ventana

Cortinas Laterales

Riel de montaje superior

Acondicionador de aire

Soporte de Cierre Soportes Laterales

PARTES INCLUIDAS (La apariencia puede variar)

Control Remoto

Sellado Inferior y Sellados

Gomaespuma de la Cortina

Marcos de la Cortina Lateral

Izquierda

Power

Speed

Mode

Eco Delay

10 49-5000531 Rev. 1

Instrucciones de instalacin

3. PREPARE EL ACONDICIONADOR DE AIRE

A. Instale el riel de montaje superior con 4 tornillos Tipo

B. Aplique los selladores de proteccin climtica provistos a la parte inferior, superior y laterales de la ventana, a fin de sellar el permetro del acondicionador de aire.

C. del panel lateral.

D. y derecha en el riel de montaje superior e inferior. Asegrese de que las cortinas laterales coincidan sobre los costados de los marcos.

1. REQUISITOS PARA LA VENTANA Estas instrucciones son para una ventana estndar

proceso para otros tipos de ventanas. El acondicionador de aire puede instalarse sin los

paneles de acorden para ajustarse a una ventana ms estrecha. Ver las dimensiones de la abertura de la ventana.

Todas las partes de apoyo deben quedar totalmente aseguradas a algn metal, mampostera o a la madera.

El tomacorriente elctrico debe estar al alcance del cable elctrico del acondicionador de aire.

Siga las dimensiones de la tabla y la ilustracin segn su modelo.

2. REQUISITOS DE UNA VENTANA DE TORMENTAS el acondicionador de aire se incline hacia el exterior y evitar que drene apropiadamente. Para solucionar este problema, adhiera un pedazo de madera a el umbral. PEDAZOS DE MADERA

LONGITUD: Lo suficientemente largo como para ajustar en el interior del marco de la ventana. GRUESO: Para determinar el grueso, coloque un

ms alta que la parte superior del marco de la ventana de tormentas o del marco vinilo. Pguelo firmemente con clavos o con tornillos proporcionados por el instalador.

A

B

Recorte y aplique la tira de proteccin climtica al extremo frontal e inferior del marco de la ventana.

Recorte y aplique la tira de proteccin climtica al extremo inferior del alfizar de la ventana.

Recorte y aplique la tira de proteccin climtica al lateral del marco de la

que el marco de ventana de tormentas

Marco de ventana de tormentas Marco vinilo

Madera

Riel de montaje superior

Riel de montaje inferior

Ajustar la cortina en el marco

IN ST

R U

C C

IO N

ES D

E IN

ST A

LA C

I N

Models A B

49-5000531 Rev. 1 11

IN STR

U C

C IO

N ES D

E IN STA

LA C

I N

Instrucciones de instalacin

5. ASEGURE EL ACONDICIONADOR DE AIRE

A. Afloje el tornillo del lado derecho del acondicionador de aire, cerca de la parte inferior.

B. que el soporte est descansando sobre el alfizar de la ventana. Ajuste el tornillo.

C. en el alfizar de la ventana, a travs de los agujeros

soporte lateral al alfizar de la ventana.

D. Repita la instalacin del soporte lateral en el lateral izquierdo.

E. Mida y recorte la hoja protegida con gomaespuma adhesiva. Aplique sobre la cortina lateral y el marco.

4. I NSTALE EL ACONDICIONADOR DE AIRE EN LA VENTANA

A. Marque el centro de la ventana. Coloque el acondicionador de aire en la ventana de modo que se encuentre centrado. Coloque el acondicionador de aire de modo que el extremo frontal del riel de montaje inferior se encuentre contra el extremo trasero del alfizar.

B. montaje superior se encuentre delante de la ventana. Asegrese de que el acondicionador de aire est nivelado o apenas inclinado hacia el exterior.

C. Extienda los paneles de la cortina hasta que llenen la ventana. Marque la ubicacin de los agujeros en

para asegurar los paneles laterales en sus lugares correspondientes.

Riel superior Marco de la ventana

Aproximadamente 5

Riel inferiorAlfizar

Gomaespuma de la cortina lateral

Selladores de Proteccin Climtica

12 49-5000531 Rev. 1

Instrucciones de instalacin

6. INSTALE EL SOPORTE DE LA TRABA DE LA VENTANA Y LA JUNTA SUPERIOR DE GOMAESPUMA DE LA VENTANA

bloqueo arriba de la parte inferior de la ventana.

A. PRECAUCIN

Para evitar la rotura de vidrios o daos sobre las ventanas, sobre vinilo o ventanas construidas de manera similar, adjunte el soporte de bloqueo de la ventana a la jamba lateral de la ventana

B. Corte la junta de gomaespuma superior de la ventana del mismo ancho que la ventana.

C. Coloque la gomaespuma entre el vidrio y la ventana para evitar el ingreso de aire e insectos a la habitacin.

NOTA: Si la junta provista no se ajusta a su ventana, obtenga el material apropiado en forma local para contar con un sellado correcto en la instalacin.

Madera

Vinilo

IN ST

R U

C C

IO N

ES D

E IN

ST A

LA C

I N

49-5000531 Rev. 1 13

Consejos para la Solucin de Problemas... Antes de solicitar el servicio tcnico

Ahorre tiempo y dinero! Primero revise los cuadros que aparecen en las siguientes pginas y es posible que no necesite solicitar reparaciones.

Problema Causas posibles Qu hacer El acondicionador de aire no enciende

El acondicionador de aire est desconectado.

Cercirese de que el acondicionador de aire est enchufado totalmente en el tomacorriente.

El fusible se dispar/ el cortacircuitos se dispar.

Inspeccione los fusibles / caja de interruptores de la casa y reemplace cualquier fusible o reajuste el interruptor.

Interrupcin en el suministro elctrico.

La unidad se reiniciar automticamente con la configuracin utilizada por ltima vez luego de reestablecer la electricidad.

desconexin por sobrecarga del compresor.Por esta razn, es posible que la unidad no comience a enfriar de forma normal hasta transcurridos 3 minutos desde que volvi a encenderse.

El dispositivo de interrupcin de corriente se ha activado.

Presione el botn RESET ubicado en el cable de alimentacin.

Si el botn RESET no se mantiene en su lugar, no utilice ms el acondicionador de aire y comunquese con un tcnico calificado.

El acondicionador de aire no enfra como debera

El flujo de aire est restringido. Cercirese de que no existe ninguna cortina, persiana o mueble bloqueando el frente del acondicionador de aire.

El control de temperatura no est ajustado apropiadamente.

En los modelos con botones, gire la temperatura a un nmero mayor.

El filtro de aire est sucio. Limpie el filtro cada 30 das por lo menos. Ver la seccin de Cuidado y limpieza.

La habitacin podra haber estado caliente.

Cuando el acondicionador de aire se enciende, usted necesita darle tiempo para que enfri la habitacin.

El aire fro se est escapando. Cercirese de que los registros de la calefaccin no estn abiertos y se encuentran retornando el aire fro.

Las bobinas de enfriamiento se congelaron. adelante.

El acondicionador de aire se est congelando

El hielo bloquea el flujo de aire hacia el acondicionador de aire evitando que se enfre la habitacin.

de temperatura en el nivel ms alto que pueda ser configurada.

Hay agua goteando afuera Tiempo hmedo y caliente. Esto es normal. Hay agua goteando en el interior de la habitacin

El acondicionador de aire no est inclinado hacia afuera.

Para drenar el agua apropiadamente, cercorese de que el acondicionador de aire est inclinado ligeramente desde el frente hacia atrs.

Se acumula agua en la bandeja

La humedad removida del aire y se drena hasta la bandeja.

Esto es normal por un corto perodo en reas con poca humedad; normal por un perodo de tiempo ms postergado en reas ms hmedas.

C O

N SEJO

S PA R

A LA SO LU

C I

N D

E PR O

B LEM

A S

14 49-5000531 Rev. 1

Configuracin WiFi

C O

N SE

JO S

PA R

A LA

S O

LU C

I N

D E

PR O

B LE

M A

S / C

O N

FI G

U R

A C

I N

W IF

I

GE Appliances SmartHQ (Para clientes en Estados Unidos) GE Appliances SmartQ Habilitado* Si su acondicionador de aire posee una etiqueta de Informacin del Electrodomstico

con su telfono inteligente para el monitoreo remoto, control y notificaciones. Para aprender ms sobre las funciones del electrodomstico conectado, y para saber qu aplicaciones de electrodomsticos conectados funcionarn con su telfono inteligente, visite www.GEAppliances.com/connect.

ConnectPlus 1-800-220-6899.

Network: GE_MODULE_XXXX PASSWORD: XXXXXXXX MAC ID: XX-XX-XX-XX-XX-XX

CONTAINS FCCID: 2ALD3-MKQTWIFI11 CONTAINS IC: 22987-MKQTWIFI11

Sonidos de operacin normales

lluviosos o cuando la humedad es alta. Esta caracterstica de diseo ayuda a remover la humedad y mejora la eficiencia.

gotear desde el lado externo de la unidad.

el condensador. Puede reducir este ruido retirando el enchufe de agua de la sub-base.

Para asegurar la mxima eficiencia, se recomienda verificar que el tapn de drenaje de goma est correctamente insertado. Este tapn se puede quitar durante la operacin para minimizar el agua en la parte posterior de la unidad; sin embargo, quitarlo reducir la eficiencia de su unidad.

NOTA:

Enchufe de Agua de la Sub-base

49-5000531 Rev. 1 15

Configuracin WiFi

INFORMACIN REGULATORIA

Declaracin de Cumplimiento con FCC/ IC: 1. Este dispositivo no podr causar interferencias perjudiciales. 2. Este dispositivo debe aceptar cualquier interferencia

recibida, incluidas las interferencias que puedan provocar un funcionamiento no deseado.

Este equipo fue probado y cumple con los lmites establecidos

brindar una proteccin razonable contra interferencias nocivas en una instalacin residencial. Este equipo genera, usa y puede emitir energa de radiofrecuencia y, si no se instala y utiliza de acuerdo con las instrucciones, puede ocasionar interferencias perjudiciales sobre las comunicaciones radiales. Sin embargo, no se garantiza que no se presenten interferencias en una instalacin en particular. Si este equipo provoca interferencias perjudiciales para la recepcin de radio o televisin, lo que puede comprobar encendiendo y apagando el equipo, se aconseja al usuario que intente corregir la

Reoriente o reubique la antena receptora. Aumente la separacin entre el equipo y el receptor. Conecte el equipo a un tomacorriente de un circuito diferente al tomacorriente al cual se encuentra conectado el receptor. Para solicitar ayuda, consulte al comerciante minorista o a un tcnico experimentado de radio/ televisin.

Etiqueta: Las modificaciones sobre esta unidad no aprobadas expresamente por parte del fabricante podran anular la autoridad del usuario para utilizar el equipo.

*Modelos Selectos nicamente

Este producto tiene capacidad Wi-Fi y requiere conectividad a Internet y un enrutador inalmbrico para permitir la interconexin con un Sistema de administracin de energa y / o con otros dispositivos, sistemas o aplicaciones externos.

C O

N FIG

U R

A C

I N

W IFI

Cmo Funciona

Appliances acondicionador de aire para sala al WiFi

para apagar su acondicionador de aire al salir del trabajo.

CHANGE TEMP TO 65

Puesta en marcha A fin de conectar su acondicionador de aire para sala, necesitar la Aplicacin de GE Appliances. La aplicacin

aplicacin de iTunes o Google Play.

Los datos de todos los electrodomsticos conectados son guardados en estricto cumplimiento con la Poltica de Privacidad de Datos de Conexin de GE Appliances. Para acceder a esta poltica, visite geappliances.com/privacy/privacy_policy_connected.

Preguntas acerca de SmartHQ Acceda a respuestas necesarias sobre la configuracin de electrodomsticos con WiFi y la conexin a su red hogarea a travs de nuestros artculos de soporte.

Para acceder a los artculos de soporte la conexin wifi del acondicionador de aire para sala, visite products. geappliances.com/appliance/gea-support-search-content.

16 49-5000531 Rev. 1

Notas

49-5000531 Rev. 1 17

G A

R A

N TA LIM

ITA D

A Garanta Limitada del Acondicionador de Aire GE Appliances

EXCLUSIN DE GARANTAS IMPLCITASSu nica y exclusiva alternativa es la reparacin del producto, como se indica en la Garanta Limitada. Las garantas implcitas, incluyendo garantas implcitas de comerciabilidad o conveniencia sobre un propsito particular, se limitan a un ao o al perodo ms corto permitido por la ley. Esta garanta limitada se extiende al comprador original y a cualquier dueo subsiguiente de productos comprados

Autorizado del Servicio Tcnico de GE Appliances, usted ser responsable por el costo de un viaje o se podr requerir que traiga el producto a una ubicacin del Servicio Tcnico de GE Appliances Autorizado para recibir el servicio. En Alaska, la garanta limitada excluye el costo de envo o llamadas del servicio tcnico a su hogar. Algunos estados no permiten la exclusin o limitacin de daos fortuitos o consecuentes. Esta garanta limitada le da derechos legales especficos y es posible que tenga otros derechos legales que varan entre un estado y otro. Para conocer cules son sus derechos legales, consulte a la oficina de asuntos del consumidor local o estatal o al Fiscal de su estado.

Garante: GE Appliances, a Haier company

Louisville, KY 40225

brinda informacin relacionada con instrucciones de funcionamiento y controles del usuario.

instalacin o el acondicionador de aire no posee la capacidad adecuada, contacte a su vendedor minorista o instalador. Usted es responsable de brindar instalaciones de conexin elctrica adecuadas.

sobre el mismo o debido a un uso irrazonable, incluyendo la falta de mantenimiento razonable o necesario.

disyuntores.

sin proteccin contra sta.

de suministro de voltaje inadecuado, accidente, incendio, inundaciones o catstrofes naturales.

posibles defectos del acondicionador de aire.

Qu No Ser Cubierto:

Por el Perodo de: Reemplazaremos:

compra original

Reemplazo, reparacin o reembolso del costo minorista original de cualquier producto que falle debido a un defecto en los materiales o la fabricacin. Si la unidad es cambiada, la unidad de reemplazo posee garanta por el resto del perodo de la garanta original de un ao sobre su producto. GE Appliances reemplazar, a su exclusivo criterio, el producto por otro de la misma o de una funcionalidad y calidad comparable o har un reembolso por el precio minorista original.

Embale la unidad correctamente. Le recomendamos usar la caja de cartn y los materiales de embalaje originales.

minorista donde fue adquirido.

Incluya en el paquete una copia del receptor de la venta u otro comprobante de la fecha de compra original. Tambin escriba su nombre y domicilio y una descripcin del defecto.

A Fin de Realizar un Reclamo de la Garanta Durante el Perodo de Devolucin Permitido por el Vendedor Minorista:

su modelo y nmero de serie.

proceso de reemplazo del producto.

y nmeros de modelo y serie.

caja de cartn a su hogar para recuperar el producto.

incluya una descripcin del defecto.

reembolso entre los 7 y 10 das hbiles una vez que hayamos recibido su paquete.

A Fin de Realizar un Reclamo sobre la Garanta Durante el Resto de la Garanta de un Ao:

Abroche su recibo aqu. Para acceder al servicio tcnico de acuerdo con la garanta deber contar con la prueba de la fecha original de com

pra.

18 49-5000531 Rev. 1

Soporte para el Consumidor SO

PO R

TE P

A R

A EL

C O

N SU

M ID

O R

Sitio Web de GE Appliances

aprovechar todos nuestros servicios de soporte a travs de Internet, diseados para su conveniencia. GEAppliances.com

Registre su Electrodomstico

una mejor comunicacin y un servicio ms puntual de acuerdo con los trminos de su garanta, en caso de surgir la necesidad. Tambin puede enviar una carta en la tarjeta de inscripcin preimpresa que se incluye con el material embalado. GEAppliances.com/register

Piezas y Accesorios Aquellos individuos calificados para realizar el servicio tcnico de sus propios electrodomsticos podrn solicitar el envo de

Internet durante las 24 horas, todos los das. GEApplianceparts.com o de forma telefnica al 877.959.8688 durante el horario de atencin comercial. Las instrucciones que figuran en este manual cubren los procedimientos que sern realizados por cualqui

Manualsnet FAQs

If you want to find out how the AHEK10AC GE works, you can view and download the GE AHEK10AC Air Conditioner Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for GE AHEK10AC as well as other GE manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a GE AHEK10AC. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the GE AHEK10AC Air Conditioner Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This GE AHEK10AC Air Conditioner Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download GE AHEK10AC Air Conditioner Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print GE AHEK10AC Air Conditioner Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the GE AHEK10AC Air Conditioner Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.