Frigidaire FPID2498SF Owner's Guide PDF

1 of 24
1 of 24

Summary of Content for Frigidaire FPID2498SF Owner's Guide PDF

Frigidaire.com USA 1-800-374-4432 Frigidaire.ca Canada 1-800-265-8352

use & care DISHWASHER

117886685 (December 2020)

Introduction .......................................................2

Important Safety information.....................3

Features ..............................................................5

Controls and Settings ....................................6

Operating Instructions ..................................8

Operating Instructions ..................................8

Care and Cleaning ......................................... 11

Troubleshooting ............................................20

Limited Warranty ......................................... 23

2 INTRODUCTION

Welcome to our family Thank you for bringing Frigidaire into your home! We see your purchase as the beginning of a long relationship together.

This manual is your resource for the use and care of your product. Please read it before using your appliance. Keep it handy for quick reference. If something doesnt seem right, the troubleshooting section will help you with common issues.

FAQs, helpful tips and videos, cleaning products, and kitchen and home accessories are available at www.frigidaire.com.

We are here for you! Visit our website, chat with an agent, or call us if you need help. We may be able to help you avoid a service visit. If you do need service, we can get that started for you.

Lets make it official! Be sure to register your product.

Keep your product info here so its easy to find.

Model Number

Serial Number

Purchase Date

NOTE

Why Energy Efficient Units run long cycles: Several factors are important to washing dishware. The energy use of the dishwasher was reduced by applying more of the factors that dont use so much energy and less of the ones that use more. As a result, you will see that the wash cycles take longer.

NOTE

Not all cycles and options available on all models.

NOTE

Very Important Information - Read Before Operating Your Dishwasher! Normal Operating Sounds This dishwasher does not sound like most dishwashers - ITS QUIETER. Your Direct Feed Wash System dish- washer uses energy efficient motors for the wash and drain portions of the cy- cle you select. Each cycle has a series of water fills and drains for washing and rinsing dishes. As each cycle begins, you may-or may not- hear the drain motor. The next sound you will hear is the splashing water as it enters the tub. PLEASE BE ADVISED: If you compare this dishwasher to previous models, you may be surprised at what you DONT hear.

NOTE

The filters will need to be cleaned to maximize wash performance during the life of your dishwasher. See Rec- ommended Frequency to Clean Your Filters for a cleaning schedule.

NOTE

The dishwasher is programmed to remember your last cycle so you do not have to reset each time.To start the dishwasher using the same cycle and options selected on the previous wash, just press theSTART/CANCEL pad.

3IMPORTANT SAFETY INFORMATION

WARNING

When using your dishwasher, follow basic precautions, including the following:

For your Safety Use your dishwasher only as

instructed in this Use and Care Manual.

This Manual does not cover every possible condition and situation that may occur. Use common sense and caution when installing, operating and maintaining any appliance.

NSF certified residential dishwashers are not intended for licensed food establishments.

DISHWASHER MUST BE ELECTRICALLY GROUNDED. This appliance must be connected to a ground metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on this appliance. Read the Installation Instructions for details.

This dishwasher is designed to operate on regular house current (120V, 60Hz). Use a circuit equipped with a 15 ampere fuse or circuit breaker. Use a 20 ampere fuse if dishwasher is connected with a food disposer.

Do not operate dishwasher unless all enclosure panels are in their proper place.

Keep young children and infants away from dishwasher when it is operating.

Do not let children abuse, sit, stand or play on door or racks of a dishwasher.

To reduce the risk of injury, do not allow children to play in or on the dishwasher.

Use only detergents and rinse agents recommended for use in a dishwasher.

Store dishwasher detergent and rinse agents out of the reach of children.

If the dishwasher drains into a food disposer, make sure disposer is completely empty before running dishwasher.

Do not wash plastic items unless marked: Dishwasher Safe or equivalent. Check with manufacturer for recommendations, if not marked. Items that are not marked dishwasher safe may melt and create a potential fire hazard.

When loading items to be washed: Locate sharp items and knives so

that they are not likely to damage the door seal or tub.

Load sharp items and knives with the handles up to reduce the risk of cut-type injuries.

Do not tamper with controls.

Use care unloading the dishware when the SANITIZE option has been selected. Contents may be hot to the touch immediately after the end of cycle.

Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If hot water system has not been used for such a period, before using dishwasher, turn on all hot water faucets and let water flow from each for several minutes. This will release any accumulated hydrogen gas. HYDROGEN GAS IS FLAMMABLE. Do not smoke or use an open flame during this time.

Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Disconnect electrical power to dishwasher before servicing.

Repairs should be done by a qualified technician.

To avoid entrapment and/ or suffocation, remove door or door latch mechanism from any dishwasher that is discarded or not in use.

4 WARNING

To reduce the risk of fire, electrical shock or injury when using your dishwasher, follow the previous basic precautions .

SAVE THESE INSTRUCTIONS

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

IMPORTANT

IMPORTANT indicates installation, oper- ation or maintenance information which is important but not hazard-related.

DANGER

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Safety Definitions This is the safety alert symbol. It is used to alert of potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

Safety Instructions DO NOT store or use gasoline, or

other flammable liquids in the vicinity of this or any other appliance. Read product labels for warnings regarding flammability and other hazards.

Remove all staples from the carton. Staples can cause severe cuts, and also destroy finishes if they come in contact with other appliances or furniture.

WARNING

Please read all instructions before using this appliance.

Child Safety Destroy or recycle the carton, plastic bags, and any exterior wrapping material immediately after the dishwasher is unpacked. Children should NEVER use these items to play. Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may become airtight chambers, and can quickly cause suffocation.

IMPORTANT SAFETY INFORMATION

5

IMPORTANT

Accessories are available for your appliance and may be purchased at Frigidaire.com or by calling 1-800-374-4432 (Frigidaire.ca or 1-800-265-8352 in Canada) or from an authorized seller.

FEATURES

A Upper Spray Arm

B Cutlery Tray

C Upper Rack

D Silverware Basket

E Filter

F Serial Label (located on right side of door)

G Rinse Aid Dispenser

H Detergent Dispenser

I Lower Spray Arm

J Lower Rack

K Middle Spray Arm

L Soft Grip Rack

M Cup Shelves

N Tub Gasket

A B

C

D

E

F

G

H

I

J

K

L

M

N

Features may vary according to model

Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against soiled surfaces. First, the dishwasher drains for a few seconds to remove soils dropped while loading, then fills with water covering the filter area. Water is then pumped through the spray arms. Soil particles go through and across the filter and down the drain as the water is pumped out. This series of steps are repeated as needed. The number of water fills varies with the cycle being used.

6 CONTROLS AND SETTINGS

CAUTION

Property Damage Hazard Before starting dishwasher be sure that the water is connected and turned on. Failure to do so may cause damage to the pump seal and result in water leakage.

Wash Cycle Selections Cycle times are approximate and will vary with options selected. Hot water is necessary to activate dishwasher detergent and melt fatty food soils. An automatic sensor will check the incoming water temperature and, if it is not hot enough, the cycle will be lengthened for automatic water heating in the main wash and final rinse of all cycles. This happens even when HIGH TEMP WASH option has not be selected. When HIGH TEMP WASH is selected, an even higher temperature will be reached to handle heavier soil loads.

Starting a Cycle

Option Selections

NOTE

Your dishwasher uses a DishSenseTM Technology to understand how much food is on the dishes and then adjusts the cycle accordingly.

Recommended Cycle for typical use: The Normal cycle with its factory default options of normal temperature and heated dry together provide the best all around performance. This cycle selection is recommended for everyday use and is suitable for a large range of both dish load sizes and food quantities remaining on those dishes.

2 Wash Temp High Select by pressing the HIGH pad. The dishwasher heats water in the main wash to approximately 140F (60C) and increases the temperature higher in the final rinse to help with the drying stage.

2 3 4 5 6 71

1 When the cycle and options have been selected, the LEDs over the cycle and options selected will illuminate. The status window will display the cycle time and then displays Press START.

To start the cycle, press START/ CANCEL pad and close the door immediately.

The status window displays Close after the START/CANCEL pad is pressed.

A tone will sound indicating the cycle has successfully started after the door is closed.

My Favorite Cycle The MY FAVORITE CYCLE option allows you to program your preferred cycle and options into one button. Once Programmed, simply press the MY FAVORITE CYCLE button followed by the START/CANCEL pad to select the programmed cycle and options.

To Program the MY FAVORITE CYCLE button:

1. Select your preferred cycle and options

2. Hold the MY FAVORITE CYCLE button for 3 seconds.

The LED over the MY FAVORITE CYCLE turns on indicating the MY FAVORITE CYCLE option has been programmed. To change the MY FAVORITE CYCLE option simply repeat steps one and two above.

7CONTROLS AND SETTINGS

This helps dishwasher detergent remove food grease and soil from dishes more effectively and aids in drying performance by adding additional rinse aid and increasing the water temperature. Sanitize Select SANITIZE option, by pressing SANITIZE pad to sanitize your dishes and glassware. When selected, the light illuminates and remains on after the cycle has completed. The water temperature in the final rinse rises to 155F (68C) and maintains that temperature for 9 minutes. This option is available in HEAVY and NORMAL wash cycles. Only these sanitization cycles have been designed to meet NSF requirements.

The cycle time is extended until the proper water temperature is reached. Washing action continues during the water heating delay. For best results, the incoming water temperature should be at least 120F (49C).

The sanitize criteria may not be satisfied if there is an interruption of the cycle, power failure or if the incoming water temperature is below 120F (49C).

Sanitize pad flashes at the end of the cycle if the NSF requirements for sanitization are not reached.

Press the SANITIZE pad to turn off the SANITIZE option. The SANITIZE light will turn off.

3 Air Dry The AIR DRY option uses reduced temperature in the final rinse. While saving energy and time, you may have items in your dish load that will not be completely dry at the end of the cycle. Deselecting AIR DRY option in combination with rinse aid will enhance drying performance. AIR DRY option is not available on all cycles. Vented Drying Option on 30 Min Wash Vented drying will heavily improve drying performance. This is a default setting on Heavy, Normal, China

Crystal and Energy Saver, and an option on 30 min Wash cycle. Deselect Air Dry to select Vented Drying. (Vented drying is activated when Air Dry LED is OFF.)

Air Dry led on Fan OFF

Air Dry led off Fan ON (vented drying option selected).

This option turns the fan on during the dry cycle to support drying performance and extends the cycle 30 minutes.

4 Wash Pressure The programmed cycles default to the surge pressure option which varies the pressure optimally for the cycles intended normal use. If, for some special circumstance, either a very low spray or very high scour pressure is desired that may be selected. Due to wash cycle optimization, some pressure options are not selectable in all wash cycles. Spray Press SPRAY pad to select this option. This varies the pressure optimally for the cycles intended normal use. Scour Press SCOUR pad to select this option. This provides a very high scour pressure. Due to wash cycle optimization, this option is not selectable in all wash cycles.

SPRAY and SCOUR can not both be selected to run together.

5 Status Window The Status Window indicates the number of delay start hours, the number of minutes left in a cycle, the level of rinse aid dosage, and the CLOSE and START cycle prompts.

6 Delay Time The DELAY TIME option allows you to automatically delay starting your dishwasher from 1-24 hours.

8 OPERATING INSTRUCTIONS

Operating Instructions

Getting Started 1. Load Dishwasher (See Preparing

and Loading Dishes). 2. Add detergent (See Dishwasher

Dispenser & Detergents). 3. Add Rinse Aid, if needed (See Rinse

Aid). 4. Run hot water faucet nearest

dishwasher until water is hot. Turn water off.

5. Select desired CYCLE (See Cycle Chart).

6. Select desired OPTION (See Option Selections).

7. To start, press START pad and close door immediately.

Select your desired cycle and options, then press the DELAY TIME pad until the desired delay time displays in the status window. The LEDs of the selected cycle and options are illuminated. The status window displays the delay time and then displays Press Start.

To start the delay countdown, press START/CANCEL pad and close door immediately.

The status window displays Close after the START/CANCEL pad is pressed.

A tone will sound indicating that countdown has started after the door is closed. The selected cycle starts when the countdown is completed.

7 START/CANCEL Pressthe START/CANCEL pad and close door immediately to start a cycle. Press and hold for three seconds to cancel a cycle. Green Light The GREEN LIGHT illuminates on the floor when the wash is complete. Blue Light The BLUE LIGHT illuminates on the floor to indicate that the wash cycle is operating.

Opening the door while the appliance operates If you open the door while a cycle is running or delay is counting down, the dishwasher will stop running.

The LEDs of selected cycle and options are illuminated. The status window displays the remaining cycle time or delay time and then displays Press Start.

To resume, press START/CANCEL pad and close the dishwasher door immediately.

The status window displays Close after the START/CANCEL pad is pressed.

A tone will sound indicating that the dishwasher continues from the point of interruption after the door is closed.

If the dishwasher door is kept open for too long, or the door is closed without pressing START/CANCEL pad, the running cycle or delay countdown will be canceled.

Child Lock Controls To prevent children from accidentally changing the dishwasher cycle or starting the dishwasher, lock the dishwasher controls by pressing the AIR DRY pad until the status window displays loc. To unlock the controls, press the AIR DRY pad until loc is no longer displayed in the status window.

To Cancel a Cycle and Delay Start Both running cycle and delay countdown can be canceled at any time.

Open the dishwasher door and press the START/CANCEL pad until you hear a tone.

The running cycle or delay countdown is canceled.

If desired, a new cycle can now be selected. By pressing START/CANCEL pad and closing the door immediately, the new cycle will begin.

To Cancel a Setting If you have selected your cycle and options and decide to cancel, by pressing the START/CANCEL pad, the unit will go into a stand-by mode, which all LEDs will go out.

9OPERATING INSTRUCTIONS

Status Window

The STATUS window, available on some models, indicates the following activity: 1-24 . . . . . . . . Number of delay start hours.

The last hour will count down inminutes.

MINUTES . . . Number of minutes left in cycle (1-99).

L1----L4 . . . . Level of Rinse Aid dosage.

CLOSE Close will scroll across the status window indicating the door needs to be closed.

PRESS START Press start will scroll across the status window indicating the START/ CANCEL pad needs to be pressed.

*In all Error Code instances, if Pressing the cancel button or turning power off at the breaker for 5 min. does not resolve the problem,contact the Frigidaire Customer Care Center at 1-800-944-9044.

User Instruction Code

Error Code Displayed Error Code*

Problem Solution

i10 A low fill has been detected.

Look for a pinched water supply line, or water shutoff is not completely opened.

i20; i40; iF0 Clogged filters or a restricted drain line has been detected.

Check and clean both filters and sump area and check for a pinched or blocked drain hose. If the drain line is attached to a disposer, check that the knockout plug has been removed.

i30 A leak or overflow of water has been detected in the bottom pan.

Look for loose connections at the water inlet valve and ensure the unit is properly leveled.

i50 A problem has been detected with the drain or wash motor.

Pressing the cancel button or turning power off at the breaker for 5 min. should clear this error code and the unit can be restarted.

If this does not resolve the problem, service will need to be called.

i60 A problem has been detected with the water heating system.

iC0 A problem has been detected with the electronic control system.

Instruction Code Displayed

Problem Solution

Close This indicates the door has been left open or not properly latched.

Ensuring the door is properly latched will clear the display. This does not indicate a problem with your dishwasher and service will not need to be contacted.

10 OPERATING INSTRUCTIONS

Cycle Chart

NOTE

*The time remaining may suddenly increase or drop several minutes. This means that the dishwasher received input from the Smart Sensor concerning the soil load and has automatically adjusted the cycle length.

Cycle Settings Water (approx.)

Time * (Hours)

Washes/ Rinses

Heavy For pots, pans casseroles and dinnerware with dried-on or baked- on soils, and silverware

Default High Options Scour, Air Dry and Sanitize

7.0 - 7.9 gal. 26.6 - 29.9 liters

2 1/4 - 3 1/4 4 Wash- es 3 Rinses

Normal For regularly soiled dishes and silverware.

Default None Available Options Spray, Scour, Air Dry, High and Sanitize

2.9 - 7.3 gal. 11.0 - 27.7 liters

2 - 3 1/4 5 Wash- es 2 Rinses

30 Min Wash A fast wash for lightly soiled dish- es and silverware

Default Scour Options Air Dry

4.5gal. 17.1 liters

1/2 3 Wash- es

1 Rinse

China Crystal For lightly soiled China and Crystal

Default Spray Options None Available

5.7 gal. 21.5 liters

1 1/2 - 2 3 Wash- es 2 Rinses

Energy Saver For lightly soiled pre-rinsed dishes and silverware

Default Air Dry Options Scour and Spray

4.4 - 7.9 gal. 16.5 - 29.7 liters

1 1/4 - 1 3/4 5 Wash-

es 3 Rinses

Rinse Only For rinsing dish- es that will be washed later.

Default None Available Options None Available

2.0 gal. 7.6 liters

1/4 2 Rinses

11 Scrape away large pieces of food, bones, pits, toothpicks, etc.The continuously filtered wash fluid will remove remaining food particles.Burned-on foods should be loosened before loading.Empty liquids from glasses and cups.

Foods such as mustard, mayonnaise, vinegar, lemon juice and tomato based products may cause discoloration of stainless steel and plastics if allowed to sit for a long period of time.Unless the dishwasher is to be operated at once, it is best to pre-rinse or use the rinse only cycle to rinse off these food soils.

Load racks so that large items do not prevent the detergent dispenser from opening.

Check manufacturers recommendations before washing items in question.

If the dishwasher drains into a Food Disposer, be sure disposer is completely empty before starting dishwasher.

CARE AND CLEANING

10 place settings standard loading pattern

8 place settings standard loading pattern

Dish Preparation Loading the Upper Rack Features and appearance of racks and silverware basket may vary from your model.

The upper rack is designed for flexibility in loading a wide variety of items including cups, glasses, stemware, small plates, bowls, etc.

Load glasses and plastic items in upper rack only.

Load items with open end facing down for better cleaning and draining.

Damage may occur if delicate items touch each other during dishwasher operation.

Long-handled knives and utensils can be placed in upper rack.

Be sure nothing protrudes through the bottom of the rack to block rotation of middle spray arm.

Loading the Cutlery Tray The Cutlery Tray is designed for flatware and most cooking or serving utensils. Heavily soiled utensils or items with baked on foods should be placed in the upper rack or silverware basket for best washing performance. The separators on the cutlery tray help keep flatware separated to avoid damage and improve cleaning.

NOTE Load cutlery as suggested with cutlery handles placed inwards to optimize cleaning performance.

12 CARE AND CLEANING

Upper Rack

Upper Rack

Flex Wash The Flex Wash system gives you the ability to wash the inside areas of baby bottles, narrow glassware and other items. To turn this feature on turn these clips to have them pointing upward (B). To turn off just slide them back down toward the rack (A). See image below.

A

B

Adjustable Upper Rack The top rack height can be easily adjusted to accommodate loading taller dishes in either rack.To raise the rack to the upper position, lift rack until both sides are at the same height and the rack will secure in place.Ensure that the rack remains level from front to back with both sides at the same height.To lower rack lift the rack slightly then push down and release.

Fold-down Tines Upper Rack The fold-down tines in the upper rack makes it easy to load those extra large and hard-to-fit items.The tines may be left up for normal use or folded down for more flexible loading.

Loading the Bottom Rack Features and appearance of racks and silverware basket may vary from your model.

The bottom rack is best for plates, saucers, bowls, and cookware.Large items should be placed along the edge so they do not block the spray arm rotation. For best results, place bowls, casseroles, and sauce pans with soiled surface facing

12 place settings standard loading pattern

13CARE AND CLEANING

8 place settings standard loading pattern

10 place settings standard loading pattern

12 place settings standard loading pattern

Bottom Rack

Bottom Rack

Fold-down Tines Bottom Rack The fold-down tines in the lower and upper rack make it easy to load those extra large and hard-to-fit items. The tines may be left up for normal use or folded down for more flexible loading.

down or toward the center.Tilt slightly for better drainage.

Make sure tall items do not block spray arm rotation.

Be sure pan handles do not protrude through the bottom of the rack and block the spray arm rotation.

14

CAUTION

Load sharp items (knives, skewers, etc.) pointing down.

Failure to do so may result in injury.

Features and appearance of racks and silverware basket may vary from your model.

Load the silverware basket while it is in the bottom rack or take the basket out for loading on a counter or table.

In some models small items like baby bottle caps, jar lids, corn cob holders, etc., can be placed in a covered section. Close the cover to hold small items in place.

Loading the Silverware Basket

Soft Grip Rack The Soft Grip Rack is used to secure in place glassware and those plastic items that may move around with the water from the spray arm.

Use suggested loading patterns, as shown, to increase washability of the silverware.

Be sure nothing protrudes through bottom of basket or rack to block the spray arm.

Do not mix silver and stainless to avoid damaging the silver finish.

The Stemware holder is used to securely hold your wine glasses in place for the best wash. To properly secure you glass simply press the stem of the glass into the center of the Cupshelf the rubber pieces will secure around the stem to hold the glass in place.

CARE AND CLEANING

When covers are up, mix items in each section of the basket with some pointing up and some down to avoid nesting. Water spray cannot reach nested items.

The Cupshelf holder can be folded down to be used to load two levels of cups, juice glasses, and other short items or fold down both and use for long items such as utensils and spatulas. Fold up to load tall glasses.

Cup Shelf/Stemware Holders

15CARE AND CLEANING

Main Wash Cup

Main Wash Cover

Cover Latch

Add an Item To add or remove items after wash cycle starts:

Unlatch door and wait a few seconds until wash action stops before opening.

Add the item and wait a few seconds to allow cold air to slowly expand inside dishwasher.

To resume cycle press the START/ CANCEL pad and close the door immediately.

How much Detergent to use The amount of detergent to use depends on the water hardness.Water hardness is measured in grains per gallon.Using too little detergent can result in poor cleaning and hard water filming or spotting.Using too much detergent in soft water can cause etching to some glassware which is surface damage that appears like a film but cannot be wiped off.Your local water company, water softener company or county extension agent can tell you the water hardness in your area.

Filling the Detergent Dispenser The detergent dispenser has a main wash cup where you will add your detergent or detergent tab.

Use only fresh automatic dishwashing detergent.Other detergents may cause oversudsing.

When using automatic dishwashing detergent tablet, place one tablet in main wash cup and close.

Add detergent just before starting cycle.

Store detergent in a cool, dry location.Moist or caked detergent may not dissolve properly.

To add detergent: 1. Press the dispenser cover latch to

open the main wash detergent cup.

2. Add the recommended amount of detergent to the main wash cup.

3. Slide the main wash cover back over the main wash cup to close.

NOTE

Hard water may cause lime deposit buildup on the interior of the dish- washer.For cleaning instructions see Removing Spots and film section.

NOTE

Detergent tablets and All-In-One packs may not dissolve completely if used with the 30 MINUTE WASH cycle. If one of these products are used, place the tab or pack directly on the bottom of the tub in a corner before starting the dishwasher, rather than placing these products in the dispenser.

CAUTION

The use of industrial grade detergent can damage parts of the dishwasher leading to damage to the unit and surrounding property. Use only household grade automatic dishwasher detergents.

16 CARE AND CLEANING

Detergent Usage Chart

Dosage of detergent Place a single detergent tablet or packet into the detergent dispenser compartment.

NOTE

For very hard water, detergent alone may not be enough. A water softener is recommended to improve water quality and dishwashing performance. Try adding more detergent at the beginning of the main wash portion of the cycle. As a rule, use 1 teaspoon for each grain above 12. Unlatch the door, open slowly and add detergent to the bottom of the tub. Close the door to latch and the dishwasher will continue through the cycle.

Water Hardness Soft Water (0-3 grains)

Medium Hard Water (4-8 grains)

Hard Water (9-12 grains)

Amount of deter- gent (teaspoons)

4 teaspoons 6 teaspoons 8 teaspoons

Dispenser cup level First Line Second Line Full

17CARE AND CLEANING

Indicator

Rinse Aid Compart- ment

Rinse Aid Cover

Water Pressure The hot water line to dishwasher must provide water pressure between 20 and 120 psi.

Low water pressure may occur when laundry or showers are in operation.If you experience poor wash performance you may need to wait until water use is reduced before starting the dishwasher.

Water Temperature Hot water is needed for best dishwashing and drying results.Water entering dishwasher should be at least 120F (49C) to give satisfactory results.

To check water temperature entering dishwasher:

Turn on hot water faucet nearest dishwasher for several minutes to clear cool water from pipes.

Hold a candy or meat thermometer in the water stream to check the temperature.

If temperature is below 120F (49C), have a qualified person raise the hot water heater thermostat setting.

NOTE

Deselecting the AIR DRY option in combination with rinse aid will en- hance drying performance. The energy required to not use the AIR DRY option costs pennies per cycle. You may choose to select the AIR DRY option; however you will have items in your dish load that will not be completely dry at the end of the cycle.

How to adjust the rinse aid dosage Press and hold the RINSE ONLY pad for 5 seconds until the status window shows rinse aid level. Pressing the DELAY TIME pad increases the increment level (L1 - L4).

Once the rinse-aid level reaches L4, the status window will start back at level L1.

Pressing the START/CANCEL button or just pausing for a few seconds confirms the rinse aid level setting: the status window shows the duration of the cycle.

IMPORTANT

Before starting a cycle, run hot water to clear cool water from pipe.

Rinse Aid Rinse aid greatly improves drying, reduces water spots, filming. With it water sheets off dishes rather than forming water droplets that cling and leave spots.

A dispenser, located next to the detergent cup, automatically releases a measured amount of rinse aid during the last rinse.If spotting and poor drying are problems, increase the amount of rinse aid dispensed.The indicator will be dark when full and will show clear when it is time to refill.

To add liquid rinse aid: 1. Lift up the rinse aid cover to open.

2. Fill the rinse aid dispenser with liquid rinse aid until the liquid reaches the indicated fill level. DO NOT overfill.

3. Press the rinse aid cover down firmly to close.

4. Wipe up any spills with a damp cloth.

The dispenser holds enough for 11 to 66 washes, depending on setting.

18 CARE AND CLEANING

Fine Filter

Align Arrows

Coarse Filter

Clean the Coarse Filter Take out the Cylinder Fine Filter and remove the Coarse Filter from the dishwasher tub bottom.Flush the Coarse Filter by holding it under running water and replace.

Clean the Cylinder Fine Filter The Cylinder Fine Filter is designed to collect some big items such as broken glass, bones and pits.The Cylinder Fine Filter needs to be cleaned to maximize wash performance.

Remove the Cylinder Fine Filter as shown, rotate it counterclockwise, lift it out, empty and clean it by rinsing under running water and replace.Use of a sponge or bottle brush may be necessary to remove all food residue.

Outside Occasionally wipe with a mild nonabrasive detergent and water.Rinse and dry.

Care of Drain Air Gap If a drain air gap was installed for your built-in dishwasher, check to make sure it is clean so the dishwasher will drain properly.A drain air gap is usually mounted on the counter top and can be inspected by removing the cover.This is not part of your dishwasher and is not covered by warranty.

19CARE AND CLEANING

Winterizing A dishwasher left in an unheated place should be protected from freezing.Have a qualified person do the following:

To Disconnect Service: 1. Turn off electrical power to the

dishwasher at the supply source by removing fuses or tripping circuit breaker.

2. Shut off water supply.

3. Place a pan under the inlet valve. Disconnect water line from the inlet valve and drain into pan.

4. Disconnect drain line from pump and drain water into pan.

To Restore Service: 1. Reconnect the water, drain, and

electrical power supply.

2. Turn on water and electrical power supply

3. Fill detergent cup and run the dishwasher through a HEAVY cycle.

4. Check connections to make sure they do not leak.

CAUTION

Freezing temperatures may cause water lines to rupture.Be sure all supply lines to and circulating lines within dishwasher are protected.

Failure to do so could result in property damage.

NOTE

See Installation Instructions for more details on disconnecting and restoring service to your dishwasher.

20 TROUBLESHOOTING

Before calling for service, review this list. It may save you both time and expense. This list includes common experiences that are not the result of defective workmanship or material in your dishwasher.

Food Soils Left on Dishes Choose another cycle for longer

washing time.

Choose the Hi-Temp Wash option.

Check rack loading section for proper loading-avoid nesting items.

Home water pressure may be too low - should be 20 to 120 pounds per square inch (psi).

Check incoming water temperature. It should be at least 120F (49C). (See Factors Affecting Performance.)

Check water hardness.For extremely hard water, it may be necessary to install a water softener. (See Detergent Chart).

Use Fresh Detergent.

Make sure items are not blocking the spray arms, preventing them from rotating.

Dishes not Dry Select heat dry option.

Make sure the rinse aid dispenser is filled.

Increase the discharge setting of rinse aid. (See Rinse Aid).

Check the incoming water temperature.Be sure it is at least 120F (49C).

Check for proper loading-avoid nesting items.

Plastic items may need to be towel dried.

Cups with a concave bottom will collect water.Load them at the far left of the upper rack so they will be held in a tilted position.

21TROUBLESHOOTING

Glassware/Flatware Spotted or Cloudy Check water hardness.For extremely

hard water, it may be necessary to install a water softener. (See Detergent Chart).

Water temperature may be low. Avoid extremely low or high temperatures. (See Factors Affecting Performance.

Avoid overloading and improper loading. (See Preparing and Loading Dishes).

Use fresh detergent.Old detergent is ineffective.

Make sure rinse aid dispenser is filled.

Check to see that proper amount of detergent is being used for cycle selected.Also, check phosphate level. (See Detergent Dispenser.)

Home water pressure may be too low - it should be 20 to 120 pounds per square inch (psi).

Dishware Chipped Load with care and do not overload.

(See Preparing and Loading Dishes).

Place delicate items in top rack.

Place glasses securely against pins and not over pins.

Load items so they are secure and dont jar loose when moving racks in and out.Move racks in and out slowly.

Make sure tall glasses and stemware will clear top of tub when rack is pushed in.

Fine antique china and crystal should be hand-washed.

Water in Bottom of Tub Water left in the tub bottom after

the cycle is complete is not normal. If water remains in the bottom of the tub, the dishwasher may not be draining properly. (See Dishwasher Does not Drain Properly).

Dishware Stained or Discolored Tea and coffee can stain cups.

Remove the stains by hand washing in a solution of 1/2 cup (120 ml) bleach and one quart (1L) of warm water.Rinse thoroughly.

Iron deposits in water can cause a yellow or brown film.A special filter installed in the water supply line will correct this problem. (See Removing Spots and Film).

Aluminum utensils can leave gray/ black marks when they rub against other items.Load Properly.

Certain high acid foods can cause discoloration of stainless steel and plastics if allowed to sit for a long period.Use the Rinse Only cycle or rinse by hand if not operating dishwasher at once.

Mixing stainless steel and silver utensils in silverware basket can cause pitting of the stainless steel blades.Avoid mixing stainless steel and silver.

Cycle Takes a Long Time Is cycle in a water heating delay?

Has the delay start option been selected?

Has the sanitize option been selected?

Normal Sounds You Will Hear Normal sounds include water fill,

water circulation and motor sounds.

Dishwasher Leaks Use only fresh detergent designed

for automatic dishwashers.Measure detergent carefully.Try a different brand.

Etching Using too much detergent especially

in soft or softened water causes damage that looks like a film but cannot be removed.

Adjust the amount of detergent based on the water hardness. (Check Detergent Chart).

Lower the water temperature.

22 TROUBLESHOOTING

Detergent Left in Dispenser Cup Detergent may be old.Discard and

use fresh detergent.

Be sure the dish load doesnt block spray from entering the detergent cup.

Check to see if cycle has been completed.

Make sure items do not prevent the detergent dispenser from opening.

Vapor at Vent Spilled rinse aid can cause foam and

lead to overflowing.Wipe up any spills with a damp cloth.

Water vapor escapes from the vent during the drying part of the cycle. This is normal.

Check to see that dishwasher is level. (See Installation Instructions).

Dishwasher Wont Run Check to see if circuit breaker is

tripped or if a fuse is blown.

Make sure water supply is turned on.

Check to see if cycle is set correctly. (See Operating Instructions).

Is dishwasher set for Delay Start Option?

Make sure door is closed and latched.

Dishwasher Wont Fill Is water supply turned on?

Dishwasher Does Not Drain Properly If unit is hooked up to a food waste

disposer, make sure the disposer is empty.

Check to see if the knockout plug has been removed from inside the food waste disposer inlet.

Check to see if drain hose is kinked.

Make sure cycle is complete, not in a pause.

Dishwasher has an Odor Soiled dishes left in dishwasher too

long can create an odor.Use Rinse Only cycle.

Removing Spots and Film Hard water can cause lime deposit buildup on the interior of the dishwasher. Dishes and glasses may also get spots and film for a number of reasons. (See Glassware/Flatware Spotted or Cloudy section).To remove buildup, and film, clean using the following instructions:

1. Load clean dishes and glasses in normal manner.Do not load any metal utensils or silverware.

2. Do not add detergent.

3. Select the NORMAL cycle.Press START/CANCEL pad.Close and latch the door.

4. Allow dishwasher to run until it starts the second water fill (approximately 10 minutes).

5. Unlatch an and open door and pour 2 cups of white vinegar into the bottom of dishwasher.

6. Close and latch door and allow cycle to finish.

NOTE

If the condition persists, it may be necessary to consider the use of water softener.

There will be a new smell when first installed.This is normal.

Check to see if unit is draining properly. (See Dishwasher Does Not Drain Properly).

Stains on Tub Interior Washing large amounts of dishware

with tomato based soil can cause a pink/orange appearance.This will not affect performance and will gradually fade over time.Pre-rinsing or using the Rinse Only cycle will reduce the chance of staining.Using air dry option will lessen staining.

Opening the door during cycle If the dishwasher door is opened

while theunit is running, theSTART/ CANCEL pad must be pressed and the door shut immediately to return the unit to the selected cycle and option.

23LIMITED WARRANTY

Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.

Exclusions This warranty does not cover the following:

1. Products with original serial numbers that have been removed, altered or cannot be readily determined.

2. Product that has been transferred from its original owner to another party or removed outside the USA or Canada.

3. Rust on the interior or exterior of the unit. 4. Products purchased as-is are not covered by this warranty. 5. Food loss due to any refrigerator or freezer failures. 6. Products used in a commercial setting. 7. Service calls which do not involve malfunction or defects in materials or workmanship, or

for appliances not in ordinary household use or used other than in accordance with the provided instructions.

8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.

9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc., which are not a part of the appliance when it is shipped from the factory.

10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or knobs, handles, or other cosmetic parts.

11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service calls to remote areas, including the state of Alaska.

12. Damages to the finish of appliance or home incurred during installation, including but not limited to floors, cabinets, walls, etc.

13. Damages caused by: services performed by unauthorized service companies; use of parts other than genuine Electrolux parts or parts obtained from persons other than authorized service companies; or external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES CUSTOMERS SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.

If You Need Service Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts. Service under this warranty must be obtained by contacting Electrolux at the addresses or phone numbers below.

This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp. Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and parts under this warranty must be performed by Electrolux or an authorized service company. Product features or specifications as described or illustrated are subject to change without notice.

USA 1-800-374-4432 Frigidaire 10200 David Taylor Drive Charlotte, NC 28262

Canada 1.800.265.8352

Electrolux Canada Corp. 5855 Terry Fox Way

Mississauga, Ontario, Canada L5V 3E4

welcome home

Frigidaire.com 1-800-374-4432

Frigidaire.ca 1-800-265-8352

owner support

accessories

service

Our home is your home. Visit us if you need help with any of these thi

Manualsnet FAQs

If you want to find out how the FPID2498SF Frigidaire works, you can view and download the Frigidaire FPID2498SF Owner's Guide on the Manualsnet website.

Yes, we have the Owner's Guide for Frigidaire FPID2498SF as well as other Frigidaire manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Guide should include all the details that are needed to use a Frigidaire FPID2498SF. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Frigidaire FPID2498SF Owner's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Frigidaire FPID2498SF Owner's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Frigidaire FPID2498SF Owner's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Frigidaire FPID2498SF Owner's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Frigidaire FPID2498SF Owner's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.