Flir Extech EA10 Thermometer User's Guide PDF

1 of 8
1 of 8

Summary of Content for Flir Extech EA10 Thermometer User's Guide PDF

User's Guide 

EasyView Dual K Thermometer 

Model EA10               

EA10en-US_V2.2 5/16 2

Introduction  Congratulations on your purchase of  the Extech EasyView Dual K Thermometer. This device  offers dual  thermocouple  inputs with multifunction  LCD display.  This meter  is  shipped  fully  tested and calibrated and, with proper use, will provide years of reliable service.     

Meter Description  1. LCD display 

2. Data  HOLD button 

3. Power button 

4. Max/Min button 

5. OFFSET button 

6. Backlite button 

7. C/F/K units select button 

8. Elapsed TIME button 

9. T1 or T1T2 or T2 display select button 

10. T1 Thermocouple input socket 

11. T2 Thermocouple input socket 

12. Battery compartment (rear) 

EA10en-US_V2.2 5/16 3

Operation 

Connecting thermocouples  1. This meter accepts two type K thermocouples with spade plugs (subminiature type with one 

spade wider than the other). 

2. Plug the thermocouple(s) into the meter's T1 and/or T2 thermocouple input jack(s). 

Turn Power ON  1. Press the        button to turn power on. The meter will perform a short selftest. 

2. If a probe is not inserted to the meter, an OL indication will appear on the display. 

Selecting C, F or K units of measure  Press the C/F/K button to select the desired temperature unit of measure. 

Selecting T1, T2, and T1T2 Displays  Press the T1 T2 T1T2 button to step through and select a display of: 

a. T1 (thermocouple 1) displays in the upper large display and T2 (thermocouple 2) temp.  displays in the lower small display. 

b. T1 plus T2 

c. T1T2 plus T1 

d. T1T2 plus T2 

MIN, MAX, AVG Recording Function with Timer  Press the MX/MN button to begin capturing the Minimum (MN), Maximum (MX), and Average  (AVG) temperature values. The Elapsed Time clock will appear on the lower left of the display  and the lower display will indicate the MAXIMUM (MX) value captured since the MX/MN button  was pressed. 

Press the MX/MN button to change the lower display to reflect the stored MX to MN and then  AVG value of the input selected in the upper display (T1, T2 or T1T2). Each reading will be  accompanied by a Timer value indicating the time when each reading was recorded. 

Press the Time button to change the elapsed time format from min:sec to hour:min. 

Press and Hold the MX/MN button until the display returns to standard operation to exit the  MX/MN function. 

Data Hold  Press the HOLD button to freeze the reading in the display. The 'H' hold icon will appear on the  upper lefthand side of the display. Press the HOLD button again to return to normal operation  (the 'H' hold icon will disappear). 

Offset  The Offset Mode permits the user to store the temperature reading as a reference value and  compare this reference value to subsequent temperature readings. In Offset mode, the meter  displays the actual measured temperature minus the stored reference value. 

Press the OFFSET button to store the currently displayed temperature readings and enter the  Offset mode. OFFSET will appear in the display.  

Press the OFFSET button to exit the mode. 

EA10en-US_V2.2 5/16 4

Backlight  Press the       backlight button to turn on the LCD display backlight. The backlight will  automatically turn off after one minute or press the button again to turn the light off. 

Auto Power OFF  The meter will automatically turn off after 30 minutes if no keys are pressed during this period.  Auto power off is disabled in the max/min recording mode. 

Turning Power OFF  Press the        button to turn power off. 

EA10en-US_V2.2 5/16 5

Specifications 

Measurement Range  200 to 1999oF (200 to 1360oC) 

Resolution  0.1oC/ oF <200o , 1oC/ oF >200o 

Accuracy  

(@23  5oC) 

(0.3% reading + 2oF) @ 200oF to 1831.9oF 

(0.5% reading + 2oF) @ 1832oF to 1999oF 

(0.3% reading + 5oC) @ 200oC to 93.1oC 

(0.3% reading + 1oC) @ 93oC to 999.9oC 

(0.5% reading + 1oC) @ 1000oC to 1360oC 

Temperature Coefficient  0.1 times the applicable accuracy specifications per oC from 0oC to  18oC and 28oC to 50oC (32oF to 64oF and 82oF to 122oF) 

Note: Temperature accuracy does not include the accuracy of the type K probe. 

Note: The temperature scale is based on the international temperature scale of 1990 (ITS90). 

General Specifications 

Display    Dual Display Multifunction LCD with Backlight 

Input Protection    60VDC; 24VAC rms 

Display Update Rate  1 per second 

Over range indication  "OL" appears on the LCD 

Open input indication  "OL" appears on the LCD 

Low battery indication  BT appears on the LCD 

Power supply    6 AAA Batteries 

Battery life    Approximately 200 hours with carbon zinc batteries 

Operating Temperature  32 to 122oF (0 to 50oC) 

Operating Humidity  < 80% RH 

Storage Temperature  14 to 140oF (10 to 60oC) 

Storage Humidity    10 to 80% RH 

Dimensions    5.91x2.8x1.4" (150x72x35mm) 

Weight    Approx. 8.29 oz. (235g) with battery   

EA10en-US_V2.2 5/16 6

Warranty  FLIR Systems, Inc. warrants this Extech Instruments brand device to be free of defects in parts and workmanship for three  years from date of shipment (a six month limited warranty applies to sensors and cables). If it should become necessary to  return the instrument for service during or beyond the warranty period, contact the Customer Service Department for  authorization. Visit the website www.extech.com for contact information. A Return Authorization (RA) number must be issued  before any product is returned. The sender is responsible for shipping charges, freight, insurance and proper packaging to  prevent damage in transit. This warranty does not apply to defects resulting from action of the user such as misuse, improper  wiring, operation outside of specification, improper maintenance or repair, or unauthorized modification. FLIR Systems, Inc.  specifically disclaims any implied warranties or merchantability or fitness for a specific purpose and will not be liable for any  direct, indirect, incidental or consequential damages. FLIRs total liability is limited to repair or replacement of the product. The  warranty set forth above is inclusive and no other warranty, whether written or oral, is expressed or implied. 

Calibration, Repair, and Customer Care Services  FLIR Systems, Inc. offers repair and calibration services for the Extech Instruments products we  sell. We offer NIST traceable calibration for most of our products. Contact our Customer Service  Department for information on calibration service availability. Annual calibrations should be  performed to verify meter performance and accuracy. Technical support and general customer  service is also provided, refer to the contact information provided below. 

Copyright  20142016 FLIR Systems, Inc. 

All rights reserved including the right of reproduction in whole or in part in any form 

www.extech.com 

Support Lines: U.S. (877) 4398324; International: +1 (603) 3247800  Technical Support: Option 3; Email: support@extech.com  Repair & Returns: Option 4; Email: repair@extech.com 

Product specifications are subject to change without notice  Please visit our website for the most uptodate information 

www.extech.com  FLIR Commercial Systems, Inc., 9 Townsend West, Nashua, NH 03063 USA 

ISO 9001 Certified

EA10en-US_V2.2 5/16 7

Garantie  FLIR Systems, Inc. garantit que cet appareil Extech Instruments est exempt de dfauts matriaux et de fabrication pendant  trois annees  partir de la date denvoi (une garantie limite de six mois sapplique aux capteurs et aux cbles). Si le renvoi de  lappareil pour rparation devient ncessaire durant ou aprs la priode de garantie, contactez le service client pour  autorisation. Pour obtenir les coordonnes, visitez le site Web suivant : www.extech.com. Un numro dautorisation de retour  (AR) doit tre dlivr avant tout retour de produit. Lexpditeur prend  sa charge les frais dexpdition, le fret, lassurance et  lemballage correct de lappareil afin de prvenir toute dtrioration durant le transport. Cette garantie ne sapplique pas aux  dommages imputables  lutilisateur, tels que lusage impropre ou abusif, un mauvais cblage, une utilisation non conforme aux  spcifications, un entretien ou une rparation incorrecte, ou toute modification non autorise. FLIR Systems, Inc. dclinera  spcifiquement toute garantie ou qualit marchande ou aptitude  lemploi prvu, et ne sera en aucun cas tenu responsable  pour tout dommage consquent, direct, indirect ou accidentel. La responsabilit totale de FLIR est limite  la rparation ou au  remplacement du produit. La garantie dfinie cidessus est inclusive et aucune autre garantie, crite ou orale, nest exprime ou  implicite. 

Calibrage, rparation et services aprsvente  FLIR Systems, Inc. offre des services de calibrage et de rparation pour les produits Extech  Instruments que nous commercialisons. Nous offrons ltalonnage traable NIST pour la plupart de  nos produits. Contactez notre service clientle pour obtenir des informations sur la disponibilit  des services d'talonnage. Un calibrage doit tre effectu chaque anne pour vrifier les  performances et la prcision du mtre. Nous offrons galement une assistance technique et un  service  la clientle. Veuillez vous reporter aux coordonnes fournies cidessous. 

Copyright  20142016 FLIR Systems, Inc. 

Tous droits rservs, y compris la reproduction partielle ou totale sous quelque forme que ce soit. 

www.extech.com 

Lignes dassistance: tatsUnis (877) 4398324; international: +1 (603) 3247800  Service dassistance technique : Option 3 ; Email : support@extech.com 

Rparations et retours : Option 4 ; Email : repair@extech.com  Les spcifications produit sont sujettes  modifications sans pravis. 

Pour les toutes dernires informations, veuillez visiter notre site Web.  www.extech.com 

FLIR Commercial Systems, Inc., 9 Townsend West, Nashua, NH 03063 USA  Certifi ISO 9001 

EA10en-US_V2.2 5/16 8

Garanta 

FLIR Systems, Inc., garantiza este dispositivo marca Extech Instruments para estar libre de defectos en partes o mano de obra  durante tres aos a partir de la fecha de embarque (se aplica una garanta limitada de seis meses para cables y sensores). Si  fuera necesario regresar el instrumento para servicio durante o despus del periodo de garanta, llame al Departamento de  Servicio a Clientes para obtener autorizacin.  Visite www.extech.com para Informacin de contacto. Se debe expedir un nmero  de Autorizacin de Devolucin (AD) antes de regresar cualquier producto. El remitente es responsable de los gastos de  embarque, flete, seguro y empaque apropiado para prevenir daos en trnsito. Esta garanta no se aplica a defectos resultantes  de las acciones del usuario como el mal uso, alambrado equivocado, operacin fuera de las especificaciones, mantenimiento o  reparacin inadecuada o modificacin no autorizada. FLIR Systems, Inc., rechaza especficamente cualesquier garantas  implcitas o factibilidad de comercializacin o idoneidad para cualquier propsito determinado y no ser responsable por  cualesquier daos directos, indirectos, incidentales o consecuentes. La responsabilidad total de FLIR est limitada a la  reparacin o reemplazo del producto.  La garanta precedente es inclusiva y no hay otra garanta ya sea escrita u oral, expresa o  implcita. 

Servicios de calibracin, reparacin y atencin a clientes 

FLIR Systems, Inc., ofrece servicios de reparacin y calibracin para los productos que vendemos  de Extech Instruments. Ofrecemos calibracin rastreable a NIST para la mayora de nuestros  productos, para informacin sobre la disponibilidad del servicio de calibracin por favor llame a  nuestro Departamento de Servicio al Cliente. Para verificar el funcionamiento y precisin se debe  realizar la calibracin anual. Adems se provee Soporte Tcnico y servicios generales al cliente,  consulte la informacin de contacto en seguida.

Lneas de soporte: EE.UU. (877) 4398324; Internacional: +1 (603) 3247800  Soporte Tcnico Opcin 3; correo electrnico: support@extech.com 

Reparacin / Devoluciones: Opcin 4; correo electrnico: repair@extech.com  Las especificaciones del producto estn sujetas a cambios sin aviso 

Por favor visite nuestra pgina en Internet para la informacin ms actualizada  www.extech.com 

FLIR Commercial Systems, Inc., 9 Townsend West, Nashua, NH 03063 USA  Certificado ISO 9001 

Copyright  20142016 FLIR Sy

Manualsnet FAQs

If you want to find out how the Extech Flir works, you can view and download the Flir Extech EA10 Thermometer User's Guide on the Manualsnet website.

Yes, we have the User's Guide for Flir Extech as well as other Flir manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a Flir Extech. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Flir Extech EA10 Thermometer User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Flir Extech EA10 Thermometer User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Flir Extech EA10 Thermometer User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Flir Extech EA10 Thermometer User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Flir Extech EA10 Thermometer User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.