Flir Breach PTQ136 Monocular Quick Start Guide V2 PDF

1 of 2
1 of 2

Summary of Content for Flir Breach PTQ136 Monocular Quick Start Guide V2 PDF

BREACHTM

Quick Start Guide

Button Long presswhen monocular is OFF TURNING ON Hold down (>8s)when monocular is ON TURNING OFF Long presswhen monocular is ONMAIN MENU Single Click SINGLE IMAGE SNAPSHOT / SELECTION (in menu) Double ClickRECORD VIDEO / STOP RECORDING

Button Short press SCREEN BRIGHTNESS INCREASE Long press E-ZOOM INCREASE Navigation in menu - UP

Button Short press SCREEN BRIGHTNESS DECREASE Long press E-ZOOM DECREASE Navigation in menu - DOWN

Buttons + Simultaneously hold the two buttons TRIGGERS UCMNUC/FFC* MANUALLY

* UCMNUC/FFC - User Controlled Manual Non Uniformity Correction/ Flat-Field Correction

Install CR123A battery as follows:

1. Unscrew the battery cap. 2. Insert the CR123A battery into the battery compartment, observing the polarity markings on the body of the monocular. 3. Replace the battery cap.

1 BATTERY INSTALLATION

2 CONTROL PANEL BUTTONS

Battery Cap Battery

Battery Polarity Symbol

Diopter Adjustment Ring

While looking through the eyepiece, rotate the diopter adjustment ring to optimize the sharpness of the image in the viewfinder.

3 DIOPTER ADJUSTMENT

For warranty information and product registration visit: www.flir.com

Most setup options can be accessed from the MAIN MENU.

To display the MAIN MENU, hold down the central button on the control panel.

The PALETTE menu allows you to select from a choice of temperature imaging modes.

The palettes act as color templates for visualization of temperature changes in the scene.

The ENHANCEMENT menu settings allow the user to take advantage of advanced signal processing algorithms, and improve the quality of the image under a variety of different thermal environments.

The RECORDING menu allows the operator to delete selected image and video files stored in the camera.

The SETTINGS menu allows you to make compass calibration, to change the position of image on the screen, pair a new remote with the camera, as well as to restore the settings to their factory defaults. The Firmware (FW) revision number is listed at the bottom of the menu display.

Select POWER DOWN item of Main Menu and then push button to turn monocular off. Or hold down button for more than 8 seconds.

5 MAIN MENU

6 PRESETS

MAIN MENU

> EXIT PALETTE ENHANCEMENT RECORDING SETTINGS POWER DOWN

ENHANCEMENT

> EXIT PRESETS <> DEFAULT CONTRAST <> 100 SHARPNESS <> 90 SMARTSCENE <> 20 GAIN <> 138 AGC SPEED <> 85

VIDEO RECORD

> EXIT FILE <> No Files

DELETE

SETTINGS

> EXIT CAL. COMPASS LEFT MARGIN <> 0 TOP MARGIN <> 0 LEARN REMOTE FACTORY RESET FW: xxxxxxxxxxxx

PALETTE

Manualsnet FAQs

If you want to find out how the Breach Flir works, you can view and download the Flir Breach PTQ136 Monocular Quick Start Guide V2 on the Manualsnet website.

Yes, we have the Quick Start Guide for Flir Breach as well as other Flir manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Start Guide should include all the details that are needed to use a Flir Breach. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Flir Breach PTQ136 Monocular Quick Start Guide V2 is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Flir Breach PTQ136 Monocular Quick Start Guide V2 consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Flir Breach PTQ136 Monocular Quick Start Guide V2 free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Flir Breach PTQ136 Monocular Quick Start Guide V2, simply download the document to your computer. Once downloaded, open the PDF file and print the Flir Breach PTQ136 Monocular Quick Start Guide V2 as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.