Contents

Flir Extech 407760 Clamp Meter User Manual PDF

1 of 6
1 of 6

Summary of Content for Flir Extech 407760 Clamp Meter User Manual PDF

407760-mul-MUL_V2.3 2/17 1

User Manual

Sound Level Meter USB Datalogger - Model 407760

Introduction Congratulations on your purchase of the 407760 Sound Level Meter Datalogger. This device measures and stores approx. 129,920 readings. Using the supplied WindowsTM software, the datalogger can be configured for datalogging rate, high/low alarm limits, frequency weighting, response time, start-mode, and other parameters. The software is also used to download the stored data to a PC. Sound Level data can then be graphed, printed and exported to other applications. The data logger is supplied with a long-life lithium battery. This meter is shipped fully tested and calibrated and, with proper use, will provide years of reliable service. Please visit our website (www.extech.com) to check for the latest version of this User Guide, Product Updates, Software updates, and Customer Support.

Operation To operate the datalogger, the supplied WindowsTM software must first be installed and running and the datalogger must be connected to the PCs USB port. Instructions for installing the software are provided on the label of the supplied CD-ROM. The datalogger is configured through the supplied software. Instructions for using the software and the datalogger are provided within the software program by way of the software HELP Utility.

Battery Replacement When the battery is low (yellow LED blinking), replace the battery as soon as possible. The Datalogger retains its stored readings even when the battery is discharged or when the battery is replaced; the data logging process will however be stopped and cannot be re-started until the battery has been replaced and the logged data has been downloaded to PC. Use only one (1) 3.6V lithium battery (1/2 AA). Before replacing the battery, disconnect the datalogger from the PC. NOTE: Leaving the datalogger plugged into the USB port for longer than necessary will shorten the battery life. Replace battery as shown in diagrams. Observe battery polarity when installing.

Copyright 2013-2017 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form

ISO-9001 Certified

www.extech.com

407760-mul-MUL_V2.3 2/17 2

Manual de Usurio

Sonmetro decibelmetro Registrador de datos USB - Modelo 407760

Introduccin Agradecemos su compra del sonmetro decibelmetro y registrador de datos modelo 407760. Este dispositivo mide y guarda aproximadamente 129,920 lecturas. Use el Software Windowstm suministrado para ajustar la tasa de registro, lmites de alarma alto y bajo, ponderacin de frecuencia, tiempo de respuesta, modo de inicio y otros parmetros del registrador. El software tambin se usa para descargar los datos guardados a la PC. Enseguida puede graficar los datos de nivel de sonido, imprimirlos y exportarlos a otras aplicaciones. El registrador de datos viene con una batera de litio de larga duracin. Este medidor se embarca totalmente probado y calibrado y con uso apropiado le proveer muchos aos de servicio confiable. Por favor visite nuestro sitio web (www.extech.com) para comprobar la ltima versin de esta Gua del usuario, actualizaciones de productos, actualizaciones de software y soporte al cliente.

Operacin Para operar el registrador de datos, debe instalar primero el Software Windowstm, luego ejecutarlo y el registrador de datos debe estar conectado a un puerto USB de la PC. Las instrucciones para la instalacin del software se encuentran en la etiqueta del CD-ROM. El registrador de datos se configura a travs del software suministrado. Las instrucciones para usar el software y el registrador de datos se encuentran en el programa de software en la utilera de Ayuda.

Sustitucin de la batera Cuando la batera est baja (LED amarillo parpadeando), reemplace la batera tan pronto como sea posible. El registrador de datos conserva sus lecturas almacenadas, incluso cuando la batera est descargada o cuando se sustituye la batera; el proceso de registro de datos, sin embargo, ser detenido y no podr reiniciarse hasta que la batera ha sido reemplazado y los datos registrados se ha descargado en el PC. Utilice slo una (1) Batera de litio de 3,6 V (1/2 'AA'). Antes de reemplazar la batera, desconectar el registrador de datos de la PC. Nota: Si deja el datalogger enchufado en el puerto USB para obtener ms de lo necesario, se acortar la vida til de la batera. Sustituya la batera como se muestra en los diagramas. La polaridad de las bateras al instalar.

Copyright 2013-2017 FLIR Systems, Inc. Reservados todos los derechos, incluyendo el derecho de reproduccin total o parcial en cualquier medio.

ISO-9001 Certified

www.extech.com

407760-mul-MUL_V2.3 2/17 3

Manuel de l'utilisateur

Enregistreur de donnes USB pour sonomtre - Modle 407760

Introduction Toutes nos flicitations pour votre acquisition de lenregistreur de donnes pour sonomtre, modle 407760. Cet appareil mesure et mmorise environ 129,920 lectures. Grce au logiciel Windows fourni, les fonctions suivantes de lenregistreur de donnes peuvent tre configures : le taux denregistrement des donnes, les limites dalarme haute et basse, la pondration de frquence, le temps de rponse, le mode de dmarrage et dautres paramtres. Le logiciel sert galement au transfert de donnes mmorises vers un ordinateur. Les donnes de niveau sonore peuvent alors tre reprsentes graphiquement, imprimes et exportes vers dautres applications. L'enregistreur de donnes est livr avec une batterie au lithium longue dure. Cet appareil est livr entirement test et calibr et, avec une bonne utilisation, vous fournira des annes de service fiable. Veuillez consulter notre site web (www.extech.com) pour rechercher la dernire version de ce Guide de l'utilisateur, les mises jour de produits logiciels, mises jour, et le Support Client.

Fonctionnement Pour utiliser lenregistreur de donnes, le logiciel Windows fourni doit dabord tre install et tre en cours dexcution, et lenregistreur de donnes doit tre connect au port USB de lordinateur. Les instructions dinstallation du logiciel figurent sur la pochette du CD-ROM fourni. La configuration de lenregistreur de donnes seffectue via le logiciel fourni. Les instructions dutilisation du logiciel et de lenregistreur de donnes sont fournies dans le logiciel par le biais de lutilitaire HELP (AIDE) du logiciel.

Remplacement de batterie Lorsque la batterie est faible (voyant jaune clignotant), remplacer la pile ds que possible. Le Datalogger conserve ses lectures en mmoire mme lorsque la batterie est dcharge ou lorsque la batterie est remplace ; le processus d'enregistrement de donnes va cependant tre arrt et ne peut tre remis en marche jusqu' ce que la batterie a t remplace et les donnes enregistres a t tlcharg sur PC. Utiliser une seule (1) Batterie lithium 3,6 V (1/2 'AA'). Avant de remplacer la batterie, dbranchez l'enregistreur du PC. Remarque : Laisser l'enregistreur branch dans le port USB pour plus longtemps que ncessaire va raccourcir la dure de vie de la batterie. Remplacer la batterie comme indiqu dans les diagrammes. Respecter la polarit lors de l'installation.

Copyright 2013-2017 FLIR Systems, Inc. Tous droits rservs, y compris la reproduction partielle ou totale sous quelque forme que ce soit.

ISO-9001 Certified

www.extech.com

407760-mul-MUL_V2.3 2/17 4

Manual do utilizador

Decibelmetro e Registrador de Dados USB Modelo 407760

Introduo Parabns pela sua compra do Decibelmetro Registrador de Dados 407760. Este aparelho mede e armazena cerca de 129,920 leituras. Usando o software WindowsTM fornecido, o registrador de dados pode ser configurado para registrar taxas, limites de alarme alto/baixo, ponderao de frequncia, tempo de resposta, modo de incio e outros parmetros. O software tambm usado para baixar os dados armazenados para um PC. Os dados de nvel de som podem ser representados em grficos, impressos e exportados para outras aplicaes. O registrador de dados vem com uma bateria de ltio de vida estendida. Este medidor fornecido totalmente testados e calibrados e com uma utilizao adequada, ir proporcionar anos de servio confivel. Visite nosso site (www.extech.com) para verificar a verso mais recente deste Guia do Usurio, Atualizaes do produto, atualizaes de software e suporte ao cliente.

Operao Para operar o registrador de dados, o software WindowsTM fornecido ter primeiro de ser instalado e colocado a funcionar e o registrador de dados tem de ser conectado a uma porta USB de um PC. As instrues para instalar o software vm indicadas na etiqueta do CD-ROM fornecido. O registrador de dados configurado atravs do software fornecido. As instrues para usar o software e o registrador de dados so fornecidas no programa do software atravs da Funo de ajuda (HELP) do software.

Substituio da bateria Quando a bateria est fraca (LED amarelo piscando), substitua a bateria logo que possvel. O datalogger mantm a sua leituras armazenadas mesmo quando a bateria descarregada ou quando a bateria substituda; o processo de registro de dados ser no entanto ser parado e no pode ser reiniciado at que a bateria tenha sido substitudo e os dados registrados foi transferido para o PC. Utilize apenas 1 (um) 3,6V bateria de ltio (1/2 "AA"). Antes de substituir a bateria, desconecte o datalogger a partir do PC. Nota: deixando o datalogger conectado na porta USB por mais tempo que o necessrio ir reduzir a vida til da bateria. Substitua a bateria conforme mostrado nos diagramas. Observe a polaridade da bateria durante a instalao.

Direitos Autorais 2013-2017 FLIR Systems, Inc. Todos os direitos reservados, incluindo o direito de reproduo no todo ou em parte sob qualquer forma.

ISO-9001 Certified

www.extech.com

407760-mul-MUL_V2.3 2/17 5

Benutzerhandbuch

USB-Schallpegelmessgert mit Datenlogger Modell 407760

Einfhrung Herzlichen Glckwunsch zum Kauf des 407760 Schallpegelmessgerts mit Datenlogger. Dieses Gert misst und speichert annhernd 129,920 Messwerte. Der Datenlogger kann durch die mitgelieferte WindowsTM Software in Bezug auf die Datenerfassungsrate, hoch/tief Alarmgrenzen, Frequenzbewertung, Reaktionszeit, Start-Modus und andere Parameter eingestellt werden. Die Software wird auch zum Herunterladen der gespeicherten Daten auf einen PC benutzt. Schallpegeldaten knnen anschlieend graphisch dargestellt, ausgedruckt oder in andere Anwendungen exportiert werden. Der Datenlogger kommt mit einer verlngerten Lebensdauer Lithium-Batterie. Dieses Megert wird vollstndig getestet und kalibriert und mit der richtigen verwenden, wird ein zuverlssiger Betrieb auf Jahre hinaus gewhrleistet. Bitte besuchen Sie unsere Website (www.extech.com), um zu berprfen, ob die neueste Version dieses Benutzerhandbuchs, Produkt Updates, Updates, Software und Support.

Bedienung Um den Datenlogger bedienen zu knnen, muss zuerst die mitgelieferte WindowsTM Software installiert und ausgefhrt und der Datenlogger mit dem USB-Anschluss des PCs verbunden werden. Anweisungen zur Installation der Software finden Sie auf dem Etikett der mitgelieferten CD-ROM. Der Datenlogger wird durch die mitgelieferte Software konfiguriert. Anweisungen zur Benutzung der Software und des Datenloggers stehen im Softwareprogramm ber das HELP-Dienstprogramm zur Verfgung.

Austausch der Batterie Wenn der Ladezustand der Batterie niedrig ist (gelbe LED blinkt), ersetzen Sie die Batterie so bald wie mglich. Der Datenlogger speichert die Messwerte gespeichert, auch wenn die Batterie entladen ist oder wenn die Batterie ersetzt wird; der Datenaufzeichnung wird jedoch nicht gestoppt und erneut gestartet werden, bis die Batterie ausgetauscht wurde und die Daten auf den PC heruntergeladen wurde. Verwenden Sie nur eine (1) 3.6V Lithium Batterie (1/2 'AA'). Bevor Sie die Batterie auswechseln, und trennen Sie den Datenlogger vom PC aus. Hinweis: Wenn Sie den Datenlogger an den USB-Port fr mehr als ntig verkrzen die Lebensdauer der Batterie. Ersetzen Sie die Batterie wie in der Abbildung gezeigt in Diagrammen. Beachten Sie beim Einbau der Polaritt der Batterie.

Copyright 2013-2017 FLIR Systems, Inc. Alle Rechte vorbehalten, einschlielich des Rechts der vollstndigen oder teilweisen Vervielfltigung in jeder Form.

ISO-9001 Certified

www.extech.com

407760-mul-MUL_V2.3 2/17 6

Manuale utente

Registratore Dati USB Fonometro - Modello 407760

Introduzione Congratulazioni per aver acquistato il Registratore Dati Fonometro 407760. Questo dispositivo misura e immagazzina circa 129,920 letture. Usando il programma WindowsTM in dotazione, il registratore dati pu essere configurato per frequenza di registrazione dati, limiti allarme superiore/inferiore, ponderazione di frequenza, tempo di risposta, modalit avvio e altri parametri. Il programma anche utilizzato per scaricare i dati memorizzati su un PC. I dati di Livello Sonoro possono poi essere graficati, stampati ed esportati su altre applicazioni. Il data logger dotato di una batteria al litio a lunga durata. Questo misuratore fornito completamente testati e calibrati e, con il corretto utilizzo, fornir anni di servizio affidabile. Si prega di visitare il nostro sito web (www.extech.com) per controllare la versione pi recente di questa guida utente, aggiornamenti del prodotto, gli aggiornamenti software e assistenza clienti.

Funzionamento Per azionare il registratore dati, il programma WindowsTM in dotazione deve prima essere installato e avviato e il registratore dati deve essere connesso ad una porta USB del PC. Le istruzioni per installare il programma sono fornite sul libretto in dotazione con il CD-ROM. Il registratore dati configurato tramite il programma in dotazione. Le istruzioni per usare il programma e il registratore dati sono fornite allinterno del software mediante lutilit HELP.

Sostituzione della batteria Quando il livello di carica della batteria basso (LED giallo lampeggiante), sostituire la batteria non appena possibile. Il Datalogger conserva le sue letture memorizzate anche quando la batteria scarica o quando la batteria viene sostituita; i dati processo di registrazione verr tuttavia interrotta e non pu essere riavviato finch la batteria stato sostituito e i dati registrati stato scaricato sul PC. Utilizzare solo una (1) Batteria al litio da 3,6 V (1/2 'AA'). Prima di sostituire la batteria, scollegare il datalogger dal PC. Nota: lasciando il datalogger inserita nella porta USB pi a lungo di quanto necessario pu accorciare la durata della batteria. Sostituire la batteria come mostrato negli schemi. Rispettare la polarit della batteria quando si installa.

Copyright 2013-2017 FLIR Systems, Inc. Tutti i diritti riservati, incluso il diritto di riproduzione integrale o parziale in qualsiasi forma.

ISO-9001 Certified

www.extech.com

Manualsnet FAQs

If you want to find out how the Extech Flir works, you can view and download the Flir Extech 407760 Clamp Meter User Manual on the Manualsnet website.

Yes, we have the User Manual for Flir Extech as well as other Flir manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Flir Extech. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Flir Extech 407760 Clamp Meter User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Flir Extech 407760 Clamp Meter User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Flir Extech 407760 Clamp Meter User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Flir Extech 407760 Clamp Meter User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Flir Extech 407760 Clamp Meter User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.