Contents

Flir A35 Series Camera User's Manual PDF

1 of 204
1 of 204

Summary of Content for Flir A35 Series Camera User's Manual PDF

Users manual FLIR Ax5 series

Users manual FLIR Ax5 series

#T559770; r. AI/37003/37003; en-US iii

Table of contents

1 Legal disclaimer..................................................................................1 1.1 Legal disclaimer .........................................................................1 1.2 Usage statistics ..........................................................................1 1.3 Changes to registry .....................................................................1 1.4 U.S. Government Regulations........................................................1 1.5 Copyright ..................................................................................1 1.6 Quality assurance .......................................................................2 1.7 Patents .....................................................................................2 1.8 EULATerms ..............................................................................2

2 Safety information ...............................................................................4 3 Notice to user .....................................................................................5

3.1 User-to-user forums ....................................................................5 3.2 Calibration.................................................................................5 3.3 Accuracy ..................................................................................5 3.4 Disposal of electronic waste ..........................................................5 3.5 Training ....................................................................................5 3.6 Documentation updates ...............................................................5 3.7 Important note about this manual....................................................5 3.8 Note about authoritative versions....................................................6

4 Customer help ....................................................................................7 4.1 General ....................................................................................7 4.2 Submitting a question ..................................................................7 4.3 Downloads ................................................................................8

5 Introduction........................................................................................9 6 System overview ............................................................................... 10

6.1 Figure .................................................................................... 10 6.2 Explanation ............................................................................. 10

7 Quick start guide ............................................................................... 11 8 List of accessories ............................................................................ 12 9 Mechanical installation ...................................................................... 13

9.1 Table stand mounting................................................................. 14 9.1.1 Figure.......................................................................... 14 9.1.2 Explanation................................................................... 14

10 Focusing the camera ......................................................................... 15 10.1 Focusing cameras with 5 to 19 mm lenses...................................... 15

10.1.1 Necessary tools ............................................................. 15 10.1.2 Procedure .................................................................... 15

10.2 Focusing cameras with 25 to 100 mm lenses .................................. 16 10.2.1 Necessary tools ............................................................. 16 10.2.2 Procedure .................................................................... 16

11 Downloads ....................................................................................... 17 12 About I/O, synchronization, and measurement ...................................... 18

12.1 FLIR Ax5 General Purpose I/O..................................................... 18 12.2 FLIR Ax5 synchronization ........................................................... 18 12.3 FLIR Ax5 measurement.............................................................. 19

13 Technical data................................................................................... 22 13.1 Online field-of-view calculator ...................................................... 22 13.2 Note about technical data ........................................................... 22 13.3 Note about authoritative versions.................................................. 22

#T559770; r. AI/37003/37003; en-US v

Table of contents

13.4 FLIR A5 f=5 mm ....................................................................... 23 13.5 FLIR A5 f=9 mm ....................................................................... 27 13.6 FLIR A5 f=9 mm (7.5 Hz) ............................................................ 31 13.7 FLIR A5 f=5 mm (7.5 Hz) ............................................................ 35 13.8 FLIR A5 f=5 mm with SC kit (7.5 Hz) ............................................. 39 13.9 FLIR A15 f=9 mm...................................................................... 43 13.10 FLIR A15 f=9 mm with SC kit (7.5 Hz)............................................ 47 13.11 FLIR A15 f=9 mm (7.5 Hz) .......................................................... 51 13.12 FLIR A15 f=19 mm (7.5 Hz)......................................................... 55 13.13 FLIR A15 f=19 mm.................................................................... 59 13.14 FLIR A35 f=9 mm...................................................................... 63 13.15 FLIR A35 f=9 mm with SC kit ....................................................... 67 13.16 FLIR A35 f=19 mm.................................................................... 71 13.17 FLIR A35 FOV 13 (60 Hz, ver. 2016) ............................................. 75 13.18 FLIR A35 FOV 24 (60 Hz, ver. 2016) ............................................. 79 13.19 FLIR A35 FOV 48 (60 Hz, ver. 2016) ............................................. 83 13.20 FLIR A35 FOV 63 (60 Hz, ver. 2016) ............................................. 87 13.21 FLIR A35 FOV 7.6 (60 Hz, ver. 2016) ............................................ 91 13.22 FLIR A65 f=13 mm with SC kit (7.5 Hz) .......................................... 95 13.23 FLIR A65 f=25 mm.................................................................... 99 13.24 FLIR A65 f=13 mm.................................................................. 103 13.25 FLIR A65 f=13 mm (7.5 Hz)....................................................... 107 13.26 FLIR A65 f=25 mm (7.5 Hz)....................................................... 111 13.27 FLIR A65 FOV 90 (30 Hz, ver. 2016) ........................................... 115 13.28 FLIR A65 FOV 6.2 (30 Hz, ver. 2016) .......................................... 119 13.29 FLIR A65 FOV 45 (30 Hz, ver. 2016) ........................................... 123 13.30 FLIR A65 FOV 25 (30 Hz, ver. 2016) ........................................... 127 13.31 FLIR A65 FOV 12.4 (30 Hz, ver. 2016)......................................... 131

14 Mechanical drawings ....................................................................... 135 15 CE Declaration of conformity ............................................................ 150 16 Pin configurations and schematics.................................................... 152

16.1 M12 connector pin configuration ................................................ 152 16.2 Pig-tail end of cable................................................................. 153 16.3 SYNC input/output schematics .................................................. 153 16.4 GP input/output schematics ...................................................... 154

17 Cleaning the camera ........................................................................ 155 17.1 Camera housing, cables, and other items..................................... 155

17.1.1 Liquids....................................................................... 155 17.1.2 Equipment .................................................................. 155 17.1.3 Procedure .................................................................. 155

17.2 Infrared lens .......................................................................... 155 17.2.1 Liquids....................................................................... 155 17.2.2 Equipment .................................................................. 155 17.2.3 Procedure .................................................................. 155

18 About FLIR Systems ........................................................................ 156 18.1 More than just an infrared camera .............................................. 157 18.2 Sharing our knowledge ............................................................ 157 18.3 Supporting our customers......................................................... 158

#T559770; r. AI/37003/37003; en-US vi

Table of contents

19 Glossary ........................................................................................ 159 20 Thermographic measurement techniques .......................................... 162

20.1 Introduction .......................................................................... 162 20.2 Emissivity.............................................................................. 162

20.2.1 Finding the emissivity of a sample.................................... 162 20.3 Reflected apparent temperature................................................. 166 20.4 Distance ............................................................................... 166 20.5 Relative humidity .................................................................... 166 20.6 Other parameters.................................................................... 166

21 History of infrared technology........................................................... 167 22 Theory of thermography................................................................... 170

22.1 Introduction ........................................................................... 170 22.2 The electromagnetic spectrum................................................... 170 22.3 Blackbody radiation................................................................. 170

22.3.1 Plancks law ................................................................ 171 22.3.2 Wiens displacement law................................................ 172 22.3.3 Stefan-Boltzmann's law ................................................. 173 22.3.4 Non-blackbody emitters................................................. 174

22.4 Infrared semi-transparent materials............................................. 176 23 The measurement formula................................................................ 177 24 Emissivity tables ............................................................................. 181

24.1 References............................................................................ 181 24.2 Tables .................................................................................. 181

#T559770; r. AI/37003/37003; en-US vii

Legal disclaimer1

1.1 Legal disclaimer

All products manufactured by FLIR Systems are warranted against defective materials and workmanship for a period of one (1) year from the delivery date of the original pur- chase, provided such products have been under normal storage, use and service, and in accordance with FLIR Systems instruction.

Products which are not manufactured by FLIR Systems but included in systems delivered by FLIR Systems to the original purchaser, carry the warranty, if any, of the particular sup- plier only. FLIR Systems has no responsibility whatsoever for such products.

The warranty extends only to the original purchaser and is not transferable. It is not appli- cable to any product which has been subjected to misuse, neglect, accident or abnormal conditions of operation. Expendable parts are excluded from the warranty.

In the case of a defect in a product covered by this warranty the product must not be fur- ther used in order to prevent additional damage. The purchaser shall promptly report any defect to FLIR Systems or this warranty will not apply.

FLIR Systems will, at its option, repair or replace any such defective product free of charge if, upon inspection, it proves to be defective in material or workmanship and provided that it is returned to FLIR Systems within the said one-year period.

FLIR Systems has no other obligation or liability for defects than those set forth above.

No other warranty is expressed or implied. FLIR Systems specifically disclaims the implied warranties of merchantability and fitness for a particular purpose.

FLIR Systems shall not be liable for any direct, indirect, special, incidental or consequen- tial loss or damage, whether based on contract, tort or any other legal theory.

This warranty shall be governed by Swedish law.

Any dispute, controversy or claim arising out of or in connection with this warranty, shall be finally settled by arbitration in accordance with the Rules of the Arbitration Institute of the Stockholm Chamber of Commerce. The place of arbitration shall be Stockholm. The lan- guage to be used in the arbitral proceedings shall be English.

1.2 Usage statistics

FLIR Systems reserves the right to gather anonymous usage statistics to help maintain and improve the quality of our software and services.

1.3 Changes to registry

The registry entry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa \LmCompatibilityLevel will be automatically changed to level 2 if the FLIR Camera Monitor service detects a FLIR camera connected to the computer with a USB cable. The modifi- cation will only be executed if the camera device implements a remote network service that supports network logons.

1.4 U.S. Government Regulations

This product may be subject to U.S. Export Regulations. Please send any inquiries to ex- portquestions@flir.com.

1.5 Copyright

2016, FLIR Systems, Inc. All rights reserved worldwide. No parts of the software includ- ing source code may be reproduced, transmitted, transcribed or translated into any

#T559770; r. AI/37003/37003; en-US 1

Legal disclaimer1

language or computer language in any form or by any means, electronic, magnetic, opti- cal, manual or otherwise, without the prior written permission of FLIR Systems.

The documentation must not, in whole or part, be copied, photocopied, reproduced, trans- lated or transmitted to any electronic medium or machine readable form without prior con- sent, in writing, from FLIR Systems.

Names and marks appearing on the products herein are either registered trademarks or trademarks of FLIR Systems and/or its subsidiaries. All other trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective owners.

1.6 Quality assurance

The Quality Management System under which these products are developed and manu- factured has been certified in accordance with the ISO 9001 standard.

FLIR Systems is committed to a policy of continuous development; therefore we reserve the right to make changes and improvements on any of the products without prior notice.

1.7 Patents

One or several of the following patents and/or design patents may apply to the products and/or features. Additional pending patents and/or pending design patents may also apply.

000279476-0001; 000439161; 000499579-0001; 000653423; 000726344; 000859020; 001106306-0001; 001707738; 001707746; 001707787; 001776519; 001954074; 002021543; 002058180; 002249953; 002531178; 0600574-8; 1144833; 1182246; 1182620; 1285345; 1299699; 1325808; 1336775; 1391114; 1402918; 1404291; 1411581; 1415075; 1421497; 1458284; 1678485; 1732314; 2106017; 2107799; 2381417; 3006596; 3006597; 466540; 483782; 484155; 4889913; 5177595; 60122153.2; 602004011681.5-08; 6707044; 68657; 7034300; 7110035; 7154093; 7157705; 7237946; 7312822; 7332716; 7336823; 7544944; 7667198; 7809258 B2; 7826736; 8,153,971; 8,823,803; 8,853,631; 8018649 B2; 8212210 B2; 8289372; 8354639 B2; 8384783; 8520970; 8565547; 8595689; 8599262; 8654239; 8680468; 8803093; D540838; D549758; D579475; D584755; D599,392; D615,113; D664,580; D664,581; D665,004; D665,440; D677298; D710,424 S; D718801; DI6702302-9; DI6903617-9; DI7002221-6; DI7002891-5; DI7002892-3; DI7005799-0; DM/057692; DM/061609; EP 2115696 B1; EP2315433; SE 0700240-5; US 8340414 B2; ZL 201330267619.5; ZL01823221.3; ZL01823226.4; ZL02331553.9; ZL02331554.7; ZL200480034894.0; ZL200530120994.2; ZL200610088759.5; ZL200630130114.4; ZL200730151141.4; ZL200730339504.7; ZL200820105768.8; ZL200830128581.2; ZL200880105236.4; ZL200880105769.2; ZL200930190061.9; ZL201030176127.1; ZL201030176130.3; ZL201030176157.2; ZL201030595931.3; ZL201130442354.9; ZL201230471744.3; ZL201230620731.8.

1.8 EULATerms

You have acquired a device (INFRARED CAMERA) that includes software licensed by FLIR Systems AB from Microsoft Licensing, GP or its affiliates (MS). Those installed software products of MS origin, as well as associated media, printed materials, and on- line or electronic documentation (SOFTWARE) are protected by international intellec- tual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved.

IF YOU DO NOTAGREE TO THIS END USER LICENSE AGREEMENT (EULA), DO NOT USE THE DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLYCON- TACT FLIR Systems AB FOR INSTRUCTIONS ON RETURN OF THE UNUSED DE- VICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OFANY PREVIOUS CONSENT).

#T559770; r. AI/37003/37003; en-US 2

Legal disclaimer1

GRANT OF SOFTWARE LICENSE. This EULA grants you the following license:

You may use the SOFTWARE only on the DEVICE. NOT FAULT TOLERANT. THE SOFTWARE IS NOT FAULT TOLERANT. FLIR Sys- tems AB HAS INDEPENDENTLY DETERMINED HOW TO USE THE SOFTWARE IN THE DEVICE, AND MS HAS RELIED UPON FLIR Systems AB TO CONDUCT SUFFICIENT TESTING TO DETERMINE THAT THE SOFTWARE IS SUITABLE FOR SUCH USE.

NOWARRANTIES FOR THE SOFTWARE. THE SOFTWARE is provided AS IS and with all faults. THE ENTIRE RISK AS TO SATISFACTORYQUALITY, PER- FORMANCE, ACCURACY, AND EFFORT (INCLUDING LACKOF NEGLIGENCE) IS WITH YOU. ALSO, THERE IS NOWARRANTYAGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE SOFTWARE OR AGAINST INFRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES REGARDING THE DEVICE OR THE SOFTWARE, THOSE WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT BINDING ON, MS.

No Liability for Certain Damages. EXCEPTAS PROHIBITED BY LAW, MS SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR IN- CIDENTAL DAMAGES ARISING FROM OR IN CONNECTIONWITH THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IFANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL MS BE LIABLE FOR ANYAMOUNT IN EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS (U.S.$250.00).

Limitations on Reverse Engineering, Decompilation, and Disassembly. You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwith- standing this limitation.

SOFTWARE TRANSFER ALLOWED BUTWITH RESTRICTIONS. You may perma- nently transfer rights under this EULA only as part of a permanent sale or transfer of the Device, and only if the recipient agrees to this EULA. If the SOFTWARE is an up- grade, any transfer must also include all prior versions of the SOFTWARE.

EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. ex- port jurisdiction. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration Regula- tions, as well as end-user, end-use and destination restrictions issued by U.S. and other governments. For additional information see http://www.microsoft.com/export- ing/.

#T559770; r. AI/37003/37003; en-US 3

Safety information2

WARNING

Make sure that you read all applicable MSDS (Material Safety Data Sheets) and warning labels on con- tainers before you use a liquid. The liquids can be dangerous. Injury to persons can occur.

WARNING

Applicability: FLIR Ax5.

Do not use screws that are too long. If you use screws that are too long, damage to the camera will occur. The maximum depth of the M3 holes is 4 mm (0.15 in.).

CAUTION

Do not point the infrared camera (with or without the lens cover) at strong energy sources, for example, devices that cause laser radiation, or the sun. This can have an unwanted effect on the accuracy of the camera. It can also cause damage to the detector in the camera.

CAUTION

Do not use the camera in temperatures more than +50C (+122F), unless other information is specified in the user documentation or technical data. High temperatures can cause damage to the camera.

CAUTION

Do not apply solvents or equivalent liquids to the camera, the cables, or other items. Damage to the bat- tery and injury to persons can occur.

CAUTION

Be careful when you clean the infrared lens. The lens has an anti-reflective coating which is easily dam- aged. Damage to the infrared lens can occur.

CAUTION

Do not use too much force to clean the infrared lens. This can cause damage to the anti-reflective coating.

CAUTION

Applicability: Cameras with an automatic shutter that can be disabled.

Do not disable the automatic shutter in the camera for a long time period (a maximum of 30 minutes is typical). If you disable the shutter for a longer time period, damage to the detector can occur.

NOTE

The encapsulation rating is only applicable when all the openings on the camera are sealed with their cor- rect covers, hatches, or caps. This includes the compartments for data storage, batteries, and connectors.

CAUTION

Applicability: Cameras where you can remove the lens and expose the infrared detector.

Do not use the pressurized air from the pneumatic air systems in a workshop when you remove dust from the detector. The air contains oil mist to lubricate the pneumatic tools and the pressure is too high. Dam- age to the detector can occur.

#T559770; r. AI/37003/37003; en-US 4

Notice to user3

3.1 User-to-user forums

Exchange ideas, problems, and infrared solutions with fellow thermographers around the world in our user-to-user forums. To go to the forums, visit:

http://www.infraredtraining.com/community/boards/

3.2 Calibration

FLIR Systems recommends that you verify your calibration yearly. You can verify the cali- bration yourself or with the help of a FLIR Systems Partner. If preferred, FLIR Systems of- fers a calibration, adjustment, and general maintenance service.

3.3 Accuracy

For very accurate results, we recommend that you wait 5 minutes after you have started the camera before measuring a temperature.

3.4 Disposal of electronic waste

As with most electronic products, this equipment must be disposed of in an environmen- tally friendly way, and in accordance with existing regulations for electronic waste.

Please contact your FLIR Systems representative for more details.

3.5 Training

To read about infrared training, visit:

http://www.infraredtraining.com http://www.irtraining.com http://www.irtraining.eu

3.6 Documentation updates

Our manuals are updated several times per year, and we also issue product-critical notifi- cations of changes on a regular basis.

To access the latest manuals and notifications, go to the Download tab at:

http://support.flir.com

It only takes a few minutes to register online. In the download area you will also find the lat- est releases of manuals for our other products, as well as manuals for our historical and obsolete products.

3.7 Important note about this manual

FLIR Systems issues generic manuals that cover several cameras within a model line.

This means that this manual may contain descriptions and explanations that do not apply to your particular camera model.

#T559770; r. AI/37003/37003; en-US 5

Notice to user3

3.8 Note about authoritative versions

The authoritative version of this publication is English. In the event of divergences due to translation errors, the English text has precedence.

Any late changes are first implemented in English.

#T559770; r. AI/37003/37003; en-US 6

Customer help4

4.1 General

For customer help, visit:

http://support.flir.com

4.2 Submitting a question

To submit a question to the customer help team, you must be a registered user. It only takes a few minutes to register online. If you only want to search the knowledgebase for existing questions and answers, you do not need to be a registered user.

When you want to submit a question, make sure that you have the following information to hand:

The camera model The camera serial number The communication protocol, or method, between the camera and your device (for ex- ample, HDMI, Ethernet, USB, or FireWire)

#T559770; r. AI/37003/37003; en-US 7

Customer help4

Device type (PC/Mac/iPhone/iPad/Android device, etc.) Version of any programs from FLIR Systems Full name, publication number, and revision number of the manual

4.3 Downloads

On the customer help site you can also download the following, when applicable for the product:

Firmware updates for your infrared camera. Program updates for your PC/Mac software. Freeware and evaluation versions of PC/Mac software. User documentation for current, obsolete, and historical products. Mechanical drawings (in *.dxf and *.pdf format). Cad data models (in *.stp format). Application stories. Technical datasheets. Product catalogs.

#T559770; r. AI/37003/37003; en-US 8

Introduction5

The FLIR Ax5 cameras have features and functions that make them the natural choice for anyone who uses PC software to solve problems. Available resolutions include 80 64, 160 128, and 320 256 pixels.

Among their main features are GigE Vision and GenICam compliance, which makes them plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 43 106 mm/1.57 1.69 4.17 in.). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit monochrome image streaming. 14-bit radiometric image streaming. High frame rates (60 Hz). Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision, Stemmers Common Vision Blox, and COGNEX Vision Pro.

Lenses: 5, 9, 13, 19, and 25 (model-dependent).

Typical applications:

Automation, thermal machine vision. Entry-level high-speed R&D.

#T559770; r. AI/37003/37003; en-US 9

System overview6

6.1 Figure

6.2 Explanation

1. Pin configuration in M12 connector. For more information, see section 16.1M12 con- nector pin configuration, page 152.

2. 4x M3 threaded holes. 3. Cable M12 pigtail or Cable M12 sync. 4. Ethernet cable CAT6, 2 m/6.6 ft. 5. PoE injector. 6. Cable kit mains.

#T559770; r. AI/37003/37003; en-US 10

Quick start guide7

Follow this procedure:

1. Download FLIR GEV Demo from http://support.flir.com/Ax5-software. 2. Install FLIR GEV Demo. 3. Connect the camera to power and to the computer, typically via a PoE injector con-

nected to the Ethernet cable. 4. Start FLIR GEV Demo. 5. In FLIR GEV Demo, click the Select/Connect button. 6. In the GEV Device Selection window, identify the camera using the MAC address

(printed on the camera). Select the camera in the list and click the OK button. 7. If the device is not visible, check the box Show unreachable Network Devices and

then select the correct device and press "Set IPAddress. Then assign the correct IP address to your device.

8. FLIR GEV Demo can now be used to set up and control the camera. Click the Play but- ton to start the image stream.

#T559770; r. AI/37003/37003; en-US 11

List of accessories8

Product name Part number

Base support T198349

Cable kit Mains (UK,EU,US) T198348

Cable M12 Pigtail T127605ACC

Cable M12 Sync T127606ACC

Ethernet cable CAT6, 2 m/6.6 ft. T951004ACC

FLIR IR Camera Player DSW-10000

FLIR Tools T198584

FLIR Tools+ (download card incl. license key) T198583

Focus adjustment tool T198342ACC

Gigabit PoE injector 16 W, with multi-plugs T911183

Table stand kit T198392

Transport case Ax5 T198594ACC

Note FLIR Systems reserves the right to discontinue models, parts or accessories, and other items, or to change specifications at any time without prior notice.

#T559770; r. AI/37003/37003; en-US 12

Mechanical installation9

The camera unit has been designed to allow it to be mounted in any position. It has a mounting interface on the bottom with four metric M3 holes.

WARNING

Do not use screws that are too long. Using screws that are too long will damage the camera. The maxi- mum depth of the M3 holes is 4 mm (0.15 in.).

Note The camera generates a considerable amount of heat during operation. This is normal. In order to transfer this heat, it is recommended that the camera is mounted on a base support or a heat sink made of a material that has a high capacity to transfer heat, e. g., aluminum. FLIR Systems provides P/N T198349 (base support) for this purpose, but other base supports or heat sinks can be used. The use of the base support is also strongly recommended in order to minimize tempera- ture drift of the infrared detector in the camera.

If the camera unit is to be permanently mounted on the application site, certain steps have to be taken. The camera unit might need to be enclosed in a protective housing and, de- pending on the ambient conditions (e.g., temperature), the housing may need to be cooled by means of water or air. In very dusty conditions the installation might also need to have a stream of pressurized air directed at the lens, in order to prevent dust build-up.

When mounting the camera unit in harsh environments, every precaution should be taken when it comes to securing the unit. If the environment exposes the unit to severe vibra- tions, there may arise a need to secure the mounting screws by means of Loctite or anoth- er industrial brand of thread-locking liquid, as well as to dampen the vibrations by mounting the camera unit on a specially designed mounting base.

For further information regarding mounting recommendations and environmental enclo- sures, contact FLIR Systems.

The camera is typically powered using PoE (Power over Ethernet). A PoE injector and ca- ble kit are available from FLIR Systems. See the part numbers below.

T198348, Cable kit mains (UK, EU, US). T911112, PoE injector. T951004ACC, Ethernet cable CAT-6, 2 m/6.6 ft.

#T559770; r. AI/37003/37003; en-US 13

Mechanical installation9

9.1 Table stand mounting

9.1.1 Figure

9.1.2 Explanation

1. Base support. 2. Table stand. 3. Gooseneck.

#T559770; r. AI/37003/37003; en-US 14

Focusing the camera10

10.1 Focusing cameras with 5 to 19 mm lenses

10.1.1 Necessary tools

Focus adjustment tool (included in the package for cameras with 5 to 19 mm lenses).

10.1.2 Procedure

Follow this procedure:

1. Note the four pegs on the inside of the focus adjustment tool.

2. Align the four pegs with the corresponding slots on the front of the lens, and push the focus adjustment tool into position.

3. Rotate the lens.

#T559770; r. AI/37003/37003; en-US 15

Focusing the camera10

10.2 Focusing cameras with 25 to 100 mm lenses

CAUTION

Do not use the focus adjustment tool when focusing cameras with 25 to 100 mm lenses.

10.2.1 Necessary tools

Allen wrench, 1.5 mm.

10.2.2 Procedure

Follow this procedure:

1. Unlock the clamp by loosening the Allen screw.

2. Focus the camera by rotating the lens.

3. Lock the clamp by tightening the Allen screw.

#T559770; r. AI/37003/37003; en-US 16

Downloads11

The principal software used to configure and control the camera is FLIR GEV Demo 1.3.0. This software is based on the PleoraeBus SDK and the runtime Pleora GEVPlayer that comes with the SDK.

Downloads:

http://support.flir.com/Ax5-software Link to download PureGEV SDK Sample (source code): http://support.flir.com/ SwDownload/app/RssSWDownload.aspx?ID=133

Link to download FLIR GEV Demo 1.3.0 (installer): http://support.flir.com/SwDownload/ app/RssSWDownload.aspx?ID=155

The camera is compliant with the following standards. Additional software and documenta- tion resources can be downloaded from these sites.

GeniCAM: http:www.genicam.org Gigabit Ethernet: http://www.ieee802.org/3

#T559770; r. AI/37003/37003; en-US 17

About I/O, synchronization, and measurement

12

12.1 FLIR Ax5 General Purpose I/O

The FLIR Ax5 camera has one general-purpose input line and one output line that can be used in control applications.

Typical usage:

The output line is asserted when an alarm condition is met. The input line is used to trigger an action, for example saving an image.

The output line GPO+ is controlled by the register UserOutputValue. Set this register to True to assert (level equal to GPIO_PWR) the GPO+ signal, and set to False to de-assert (level is equal to GPIO_GND).

You can monitor the input line by reading the LineStatus register on a regular basis. The LineStatus register will returnTrue if the input level is asserted (level equal to GPIO_PWR voltage), and it will returnFalse if the input line is de-asserted (level is equal to GPIO_ GND).

Another option is to configure the camera to send a GigEVision event when the input line state is changed. In order to configure the camera for event transmission you need to modify the following registers:

PLC_Q7_Variable0 Enum Set this register to PLC_I0 (enu- meration value 2) to route the GPI signal

EventSelector Enum Set this register to PLC_Inter- rupt_FIFO0_Q7 (enumeration value 5)

EventNotification Enum Set this register to GigEVisionE- vent (enumeration value 3)

To de-bounce the input signal you also might want to configure the LineDebounceFactor register. This register controls the width of the window during which spurious transitions from the input line are filtered out (in increments of ~480 ns). This register is 0 by default, which means that the de-bouncing is disabled. The maximum value for this register is 65535, which corresponds to a maximum holding time of ~31 ms.

The FLIR GEV Demo 1.3 sample illustrates how to setup the event transmission. C++ source code is available in PureGEV SDK Sample.

Applicable downloads:

Link to download PureGEV SDK Sample (source code): http://support.flir.com/ SwDownload/app/RssSWDownload.aspx?ID=133

Link to download FLIR GEV Demo 1.3.0 (installer): http://support.flir.com/SwDownload/ app/RssSWDownload.aspx?ID=155

12.2 FLIR Ax5 synchronization

The camera provides an external sync channel that can be used to synchronize the frame start between two cameras, one configured as the master and the other configured as the slave. It can also be used to synchronize the frame start of a camera with that of another product.

#T559770; r. AI/37003/37003; en-US 18

About I/O, synchronization, and measurement12

Figure 12.1 Master/slave synchronization between two FLIR Ax5 cameras (NTSC).

Note External synchronization can be applied but only by using an input signal with a fre- quency of 29.97 Hz (NTSC).

The signal voltage (relative to digital GND) is 3.3 V. The pulse width (minimum) is 100 ns (will be extended to 1 s).

Note that the synchronization mode is not persistent. The camera will always return to SyncMode Disabled after reset or power cycling.

For slow configurations (9 Hz), the output frame rate is a fraction of the sync pulse rate. Because there is ambiguity as to which received pulse triggers the frame timing, FLIR does not recommend using the external sync interface with a slow-configured camera.

Note The only difference between ExtSyncMaster and SelfSyncSlavemode is that the incoming sync signal is relayed to the SYNC_OUT port if set to ExtSyncMaster.

12.3 FLIR Ax5 measurement

The FLIR Ax5 camera has an option to output 14-bit digital video that is temperature linear.

Each count in the temperature-linear video corresponds to either 0.04 K or 0.4 K in 14-bit video, depending on the selected resolution.

Temperature-linear output is enabled or disabled with the feature register:

TemperatureLinearMode: On (1) or Off (0)

Temparture-linear resolution is determined with the feature register:

TemperatureLinearResolution: Low 0.4 K (0) or High 0.04 K (1)

If TemperatureLinearMode is On, the signal-to-temperature mapping is calculated using the equations

S corresponds to the 14-bit pixel value.

If the TemperatureLinearMode is Off, then the camera provides registers that can be used to convert signal values to temperature. For each measurement range (or gain mode) there is a set of register values that is used for this conversion.

#T559770; r. AI/37003/37003; en-US 19

About I/O, synchronization, and measurement12

The conversion from the corrected signal S to the temperature T[K] is performed using the external RBFO values for the selected lens and gain mode. The signal-to-temperature mapping is calculated using the equation

ln(x) is the base-e logarithm of the x parameter, and S corresponds to the 14-bit pixel value. Register name Type

R Integer

B Float

F Float

O Float (handles only positive vales)

OInt Integer (same as O but handles negative values)

Please note that these registers will be automatically updated when switching between the high gain mode and the low gain mode.

The FLIR GEV Demo sample illustrates how to use this conversion formula.

You also have the option to do your own one-point calibration by adjusting the offset value (register OInt) by pointing the camera at an accurately known temperature. Knowing the temperature, you can then calculate the offset value and update the OInt register.

The FLIR GEV Demo sample illustrates how to perform this kind of calibration. Please note that you will need to save the current settings if you want the new offset value to be persis- tent. Use the command register SensorSetDefaults to set all current settings as power on defaults.

There are additional registers that also affect the temperature linear output. These regis- ters are grouped together as Object Parameter registers. These registers only affect the transformation of detector signal values to temperature values when the camera is in tem- perature linear mode.

ReflectedTemperature: The estimated reflected background temperature for the target scene.

ObjectEmissivity: The target scene emissivity factor. The default value is 1.0.

WindowTransmission: The estimated transmission factor for the protective window. The default value is 1.0.

WindowTemperature: The external window temperature Twin (in kelvin).

AtmosphericTransmission: The estimated transmission factor for the atmosphere be- tween the camera and the scene.

AtmosphericTemperature: The estimated temperature Tatm for the atmosphere between the camera and the scene.

The correction for scene parameters is extended to include the following parameters:

#T559770; r. AI/37003/37003; en-US 20

About I/O, synchronization, and measurement12

Figure 12.2 1: Scene, Tscene; 2: Reflected background temperature; 3: Atmosphere, TAtm; 4: External win- dow, Twin; 5: Infrared camera.

Note The default values for the object parameters are set to values that will have no im- pact on the conversion between detector signal values and corrected signal values.

#T559770; r. AI/37003/37003; en-US 21

Technical data13

13.1 Online field-of-view calculator

Please visit http://support.flir.com and click the photo of the camera series for field-of-view tables for all lenscamera combinations.

13.2 Note about technical data

FLIR Systems reserves the right to change specifications at any time without prior notice. Please check http://support.flir.com for latest changes.

13.3 Note about authoritative versions

The authoritative version of this publication is English. In the event of divergences due to translation errors, the English text has precedence.

Any late changes are first implemented in English.

#T559770; r. AI/37003/37003; en-US 22

Technical data13

13.4 FLIR A5 f=5 mm

P/N: 62205-0101 Rev.: 35207 General description

The FLIR A5 has features and functions that make it the natural choice for anyone who uses PC software to solve problems and for whom 80 64 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 80 64 pixel images streamed at 60 Hz, signal linear. 14-bit 80 64 pixel images streamed at 60 Hz, signal and temperature linear. High frame rates (60 Hz). Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 80 64 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 44 36

Focal length 5 mm (0.20 in.)

Spatial resolution (IFOV) 10.0 mrad

F-number 1.25

Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 50 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 23

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 80 64 pixels @ 60 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <2, 1 = 212 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 24

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Focus adjustment tool Printed documentation

Packaging, weight

Packaging, size 295 200 105 mm (11.6 7.9 4.1 in.)

EAN-13 7332558003930 4743254000636 (Estonia plant)

#T559770; r. AI/37003/37003; en-US 25

Technical data13

Shipping information

UPC-12 845188003586

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198342ACC; Focus adjustment tool T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 26

Technical data13

13.5 FLIR A5 f=9 mm

P/N: 62209-0101 Rev.: 35207 General description

The FLIR A5 has features and functions that make it the natural choice for anyone who uses PC software to solve problems and for whom 80 64 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 80 64 pixel images streamed at 60 Hz, signal linear. 14-bit 80 64 pixel images streamed at 60 Hz, signal and temperature linear. High frame rates (60 Hz). Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 80 64 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 25 20

Focal length 9 mm (0.35 in.)

Spatial resolution (IFOV) 5.56 mrad

F-number 1.25

Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 50 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 27

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 80 64 pixels @ 60 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <2, 1 = 212 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 28

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Focus adjustment tool Printed documentation

Packaging, weight

Packaging, size 295 200 105 mm (11.6 7.9 4.1 in.)

EAN-13 7332558003954 4743254000643 (Estonia plant)

#T559770; r. AI/37003/37003; en-US 29

Technical data13

Shipping information

UPC-12 845188003593

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198342ACC; Focus adjustment tool T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 30

Technical data13

13.6 FLIR A5 f=9 mm (7.5 Hz)

P/N: 64209-0101 Rev.: 35207 General description

The FLIR A5 has features and functions that make it the natural choice for anyone who uses PC software to solve problems and for whom 80 64 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 80 64 pixel images streamed at 7.5 Hz, signal linear. 14-bit 80 64 pixel images streamed at 7.5 Hz, signal and temperature linear. Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 80 64 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 25 20

Focal length 9 mm (0.35 in.)

Spatial resolution (IFOV) 5.56 mrad

F-number 1.25

Image frequency 7.5 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 50 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 31

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 7.5 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 80 64 pixels @ 7.5 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <2, 1 = 212 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 32

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Focus adjustment tool Printed documentation

Packaging, weight

Packaging, size 295 200 105 mm (11.6 7.9 4.1 in.)

EAN-13 7332558005637

UPC-12 845188005849

Country of origin Sweden

#T559770; r. AI/37003/37003; en-US 33

Technical data13

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198342ACC; Focus adjustment tool T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 34

Technical data13

13.7 FLIR A5 f=5 mm (7.5 Hz)

P/N: 64205-0101 Rev.: 35207 General description

The FLIR A5 has features and functions that make it the natural choice for anyone who uses PC software to solve problems and for whom 80 64 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 80 64 pixel images streamed at 7.5 Hz, signal linear. 14-bit 80 64 pixel images streamed at 7.5 Hz, signal and temperature linear. Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 80 64 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 44 36

Focal length 5 mm (0.20 in.)

Spatial resolution (IFOV) 10.0 mrad

F-number 1.25

Image frequency 7.5 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 50 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 35

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 7.5 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 80 64 pixels @ 7.5 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <2, 1 = 212 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 36

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Focus adjustment tool Printed documentation

Packaging, weight

Packaging, size 295 200 105 mm (11.6 7.9 4.1 in.)

EAN-13 7332558005620

UPC-12 845188005832

Country of origin Sweden

#T559770; r. AI/37003/37003; en-US 37

Technical data13

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198342ACC; Focus adjustment tool T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 38

Technical data13

13.8 FLIR A5 f=5 mm with SC kit (7.5 Hz)

P/N: 64205-0102 Rev.: 35207 General description

The FLIR A5 has features and functions that make it the natural choice for anyone who uses PC software to solve problems and for whom 80 64 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 80 64 pixel images streamed at 7.5 Hz, signal linear. 14-bit 80 64 pixel images streamed at 7.5 Hz, signal and temperature linear. Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 80 64 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 44 36

Focal length 5 mm (0.20 in.)

Spatial resolution (IFOV) 10.0 mrad

F-number 1.25

Image frequency 7.5 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 50 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 39

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 7.5 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 80 64 pixels @ 7.5 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <2, 1 = 212 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 40

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Hard transport case Infrared camera with lens Base support Cable tie (2 ea.) Ethernet cable CAT-6, 2m/6.6 ft (2 ea.) FLIR ResearchIR Standard 4 Focus adjustment tool Gooseneck Mains cable kit (UK,EU,US) PoE Injector (power over Ethernet) Printed documentation Table stand

#T559770; r. AI/37003/37003; en-US 41

Technical data13

Shipping information

Packaging, weight

Packaging, size 370 180 320 mm (14.6 7.1 12.6 in.)

EAN-13 7332558005675

UPC-12 845188005887

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198342ACC; Focus adjustment tool T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 42

Technical data13

13.9 FLIR A15 f=9 mm

P/N: 62309-0101 Rev.: 35207 General description

The FLIR A15 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 160 128 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 160 128 pixel images streamed at 60 Hz, signal linear. 14-bit 160 128 pixel images streamed at 60 Hz, signal and temperature linear. High frame rates (60 Hz). Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 160 128 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 48 39

Focal length 9 mm (0.35 in.)

Spatial resolution (IFOV) 5.56 mrad

F-number 1.25

Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 50 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 43

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 160 128 pixels @ 60 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <2, 1 = 212 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 44

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Focus adjustment tool Printed documentation

Packaging, weight

Packaging, size 295 200 105 mm (11.6 7.9 4.1 in.)

EAN-13 7332558003978 4743254000599 (Estonia plant)

#T559770; r. AI/37003/37003; en-US 45

Technical data13

Shipping information

UPC-12 845188003548

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198342ACC; Focus adjustment tool T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 46

Technical data13

13.10 FLIR A15 f=9 mm with SC kit (7.5 Hz)

P/N: 64309-0102 Rev.: 35207 General description

The FLIR A15 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 160 128 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 160 128 pixel images streamed at 7.5 Hz, signal linear. 14-bit 160 128 pixel images streamed at 7.5 Hz, signal and temperature linear. Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 160 128 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 48 39

Focal length 9 mm (0.35 in.)

Spatial resolution (IFOV) 5.56 mrad

F-number 1.25

Image frequency 7.5 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 50 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 47

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 7.5 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 160 128 pixels @ 7.5 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <2, 1 = 212 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 48

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Hard transport case Infrared camera with lens Base support Cable tie (2 ea.) Ethernet cable CAT-6, 2m/6.6 ft (2 ea.) FLIR ResearchIR Standard 4 Focus adjustment tool Gooseneck Mains cable kit (UK,EU,US) PoE Injector (power over Ethernet) Printed documentation Table stand

#T559770; r. AI/37003/37003; en-US 49

Technical data13

Shipping information

Packaging, weight

Packaging, size 370 180 320 mm (14.6 7.1 12.6 in.)

EAN-13 7332558005651

UPC-12 845188005863

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198342ACC; Focus adjustment tool T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 50

Technical data13

13.11 FLIR A15 f=9 mm (7.5 Hz)

P/N: 64309-0101 Rev.: 35207 General description

The FLIR A15 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 160 128 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 160 128 pixel images streamed at 7.5 Hz, signal linear. 14-bit 160 128 pixel images streamed at 7.5 Hz, signal and temperature linear. Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 160 128 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 48 39

Focal length 9 mm (0.35 in.)

Spatial resolution (IFOV) 5.56 mrad

F-number 1.25

Image frequency 7.5 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 50 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 51

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 7.5 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 160 128 pixels @ 7.5 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <2, 1 = 212 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 52

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Focus adjustment tool Printed documentation

Packaging, weight

Packaging, size 295 200 105 mm (11.6 7.9 4.1 in.)

EAN-13 7332558005644

UPC-12 845188005856

Country of origin Sweden

#T559770; r. AI/37003/37003; en-US 53

Technical data13

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198342ACC; Focus adjustment tool T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 54

Technical data13

13.12 FLIR A15 f=19 mm (7.5 Hz)

P/N: 64319-0101 Rev.: 35207 General description

The FLIR A15 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 160 128 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 160 128 pixel images streamed at 7.5 Hz, signal linear. 14-bit 160 128 pixel images streamed at 7.5 Hz, signal and temperature linear. Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 160 128 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 25 19

Focal length 19 mm (0.75 in.)

Spatial resolution (IFOV) 2.63 mrad

F-number 1.25

Image frequency 7.5 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 50 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 55

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 7.5 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 160 128 pixels @ 7.5 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <2, 1 = 212 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 56

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Focus adjustment tool Printed documentation

Packaging, weight

Packaging, size 295 200 105 mm (11.6 7.9 4.1 in.)

EAN-13 7332558005668

UPC-12 845188005870

Country of origin Sweden

#T559770; r. AI/37003/37003; en-US 57

Technical data13

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198342ACC; Focus adjustment tool T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 58

Technical data13

13.13 FLIR A15 f=19 mm

P/N: 62319-0101 Rev.: 35207 General description

The FLIR A15 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 160 128 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 160 128 pixel images streamed at 60 Hz, signal linear. 14-bit 160 128 pixel images streamed at 60 Hz, signal and temperature linear. High frame rates (60 Hz). Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 160 128 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 25 19

Focal length 19 mm (0.75 in.)

Spatial resolution (IFOV) 2.63 mrad

F-number 1.25

Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 50 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 59

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 160 128 pixels @ 60 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <2, 1 = 212 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 60

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Focus adjustment tool Printed documentation

Packaging, weight

Packaging, size 295 200 105 mm (11.6 7.9 4.1 in.)

EAN-13 7332558003992 4743254000605 (Estonia plant)

#T559770; r. AI/37003/37003; en-US 61

Technical data13

Shipping information

UPC-12 845188003555

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198342ACC; Focus adjustment tool T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 62

Technical data13

13.14 FLIR A35 f=9 mm

P/N: 73309-0101 Rev.: 35207 General description

The FLIR A35 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 320 256 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 320 256 pixel images streamed at 60 Hz, signal linear. 14-bit 320 256 pixel images streamed at 60 Hz, signal and temperature linear. High frame rates (60 Hz). Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 320 256 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 48 39

Focal length 9 mm (0.35 in.)

Spatial resolution (IFOV) 2.78 mrad

F-number 1.25

Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 25 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 63

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 320 256 pixels @ 60 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 64

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Focus adjustment tool Printed documentation

Packaging, weight

Packaging, size 295 200 105 mm (11.6 7.9 4.1 in.)

EAN-13 7332558010563

UPC-12 845188011239

Country of origin Sweden

#T559770; r. AI/37003/37003; en-US 65

Technical data13

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 66

Technical data13

13.15 FLIR A35 f=9 mm with SC kit

P/N: 73309-0102 Rev.: 35207 General description

The FLIR A35 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 320 256 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 320 256 pixel images streamed at 60 Hz, signal linear. 14-bit 320 256 pixel images streamed at 60 Hz, signal and temperature linear. High frame rates (60 Hz). Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 320 256 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 48 39

Focal length 9 mm (0.35 in.)

Spatial resolution (IFOV) 2.78 mrad

F-number 1.25

Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 25 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 67

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 320 256 pixels @ 60 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 68

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Hard transport case Infrared camera with lens Base support Cable tie (2 ea.) Ethernet cable CAT-6, 2m/6.6 ft (2 ea.) FLIR ResearchIR Standard 4 Focus adjustment tool Gooseneck Mains cable kit (UK,EU,US) PoE Injector (power over Ethernet) Printed documentation Table stand

#T559770; r. AI/37003/37003; en-US 69

Technical data13

Shipping information

Packaging, weight

Packaging, size 370 180 320 mm (14.6 7.1 12.6 in.)

EAN-13 7332558010570

UPC-12 845188011246

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 70

Technical data13

13.16 FLIR A35 f=19 mm

P/N: 73319-0101 Rev.: 35207 General description

The FLIR A35 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 320 256 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 320 256 pixel images streamed at 60 Hz, signal linear. 14-bit 320 256 pixel images streamed at 60 Hz, signal and temperature linear. High frame rates (60 Hz). Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 320 256 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 25 19

Focal length 19 mm (0.75 in.)

Spatial resolution (IFOV) 1.32 mrad

F-number 1.25

Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 25 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 71

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 320 256 pixels @ 60 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 72

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Focus adjustment tool Printed documentation

Packaging, weight

Packaging, size 295 200 105 mm (11.6 7.9 4.1 in.)

EAN-13 7332558010587

UPC-12 845188011253

Country of origin Sweden

#T559770; r. AI/37003/37003; en-US 73

Technical data13

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 74

Technical data13

13.17 FLIR A35 FOV 13 (60 Hz, ver. 2016)

P/N: 74335-0101 Rev.: 36981 General description

The FLIR A35 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 320 256 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 320 256 pixel images streamed at 60 Hz, signal linear. 14-bit 320 256 pixel images streamed at 60 Hz, signal and temperature linear. High frame rates (60 Hz). Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 320 256 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 13 10.8

Focal length 35 mm (1.38 in.)

Spatial resolution (IFOV) 0.714 mrad

F-number 1.2

Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 25 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 75

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 320 256 pixels @ 60 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 76

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +60C (+5F to +140F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC60068-2-6) and MIL-STD810G

Physical data

Camera size (L W H) 116.8 49.6 46.6 mm (4.6 1.9 1.8 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Printed documentation

EAN-13 7332558012291

UPC-12 845188013400

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US)

#T559770; r. AI/37003/37003; en-US 77

Technical data13

T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 78

Technical data13

13.18 FLIR A35 FOV 24 (60 Hz, ver. 2016)

P/N: 74319-0101 Rev.: 36987 General description

The FLIR A35 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 320 256 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact. GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 320 256 pixel images streamed at 60 Hz, signal linear. 14-bit 320 256 pixel images streamed at 60 Hz, signal and temperature linear. High frame rates (60 Hz). Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 320 256 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 24 19.2

Focal length 19 mm (0.75 in.)

Spatial resolution (IFOV) 1.32 mrad

F-number 1.25

Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 25 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 79

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 320 256 pixels @ 60 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 80

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +60C (+5F to +140F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC60068-2-6) and MIL-STD810G

Physical data

Camera size (L W H) 104.1 49.6 46.6 mm (4.1 1.9 1.8 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Focus adjustment tool Printed documentation

EAN-13 7332558011096

UPC-12 845188011963

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support

#T559770; r. AI/37003/37003; en-US 81

Technical data13

T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198342ACC; Focus adjustment tool T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 82

Technical data13

13.19 FLIR A35 FOV 48 (60 Hz, ver. 2016)

P/N: 74309-0101 Rev.: 36996 General description

The FLIR A35 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 320 256 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 320 256 pixel images streamed at 60 Hz, signal linear. 14-bit 320 256 pixel images streamed at 60 Hz, signal and temperature linear. High frame rates (60 Hz). Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 320 256 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 48 39

Focal length 9 mm (0.35 in.)

Spatial resolution (IFOV) 2.78 mrad

F-number 1.25

Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 25 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 83

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 320 256 pixels @ 60 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 84

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +60C (+5F to +140F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC60068-2-6) and MIL-STD810G

Physical data

Camera size (L W H) 104.1 49.6 46.6 mm (4.1 1.9 1.8 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Focus adjustment tool Printed documentation

EAN-13 7332558011089

UPC-12 845188011956

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support

#T559770; r. AI/37003/37003; en-US 85

Technical data13

T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198342ACC; Focus adjustment tool T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 86

Technical data13

13.20 FLIR A35 FOV 63 (60 Hz, ver. 2016)

P/N: 74307-0101 Rev.: 36995 General description

The FLIR A35 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 320 256 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact. GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 320 256 pixel images streamed at 60 Hz, signal linear. 14-bit 320 256 pixel images streamed at 60 Hz, signal and temperature linear. High frame rates (60 Hz). Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 320 256 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 63 50

Focal length 7.5 mm (0.30 in.)

Spatial resolution (IFOV) 3.33 mrad

F-number 1.4

Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 25 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 87

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 320 256 pixels @ 60 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 88

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +60C (+5F to +140F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC60068-2-6) and MIL-STD810G

Physical data

Camera size (L W H) 104.1 49.6 46.6 mm (4.1 1.9 1.8 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Focus adjustment tool Printed documentation

EAN-13 7332558011614

UPC-12 845188012564

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support

#T559770; r. AI/37003/37003; en-US 89

Technical data13

T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198342ACC; Focus adjustment tool T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 90

Technical data13

13.21 FLIR A35 FOV 7.6 (60 Hz, ver. 2016)

P/N: 74360-0101 Rev.: 36997 General description

The FLIR A35 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 320 256 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 320 256 pixel images streamed at 60 Hz, signal linear. 14-bit 320 256 pixel images streamed at 60 Hz, signal and temperature linear. High frame rates (60 Hz). Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 320 256 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 7.6 6.08

Focal length 60 mm (2.36 in.)

Spatial resolution (IFOV) 0.417 mrad

F-number 1.25

Image frequency 60 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 25 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 91

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 60 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 320 256 pixels @ 60 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 92

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +60C (+5F to +140F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC60068-2-6) and MIL-STD810G

Physical data

Camera size (L W H) 141.2 61.4 61.4 mm (5.6 2.4 2.4 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Printed documentation

EAN-13 7332558012307

UPC-12 845188013417

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US)

#T559770; r. AI/37003/37003; en-US 93

Technical data13

T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 94

Technical data13

13.22 FLIR A65 f=13 mmwith SC kit (7.5 Hz)

P/N: 73513-0102 Rev.: 35207 General description

The FLIR A65 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 640 512 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 640 512 pixel images streamed at 7.5 Hz, signal linear 14-bit 640 512 pixel images streamed at 7.5 Hz, signal and temperature linear Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 640 512 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 45 37

Focal length 13 mm (0.5 in.)

Spatial resolution (IFOV) 1.31 mrad

F-number 1.25

Image frequency 7.5 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 17 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 95

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 7.5 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 640 512 pixels @ 7.5 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 96

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Hard transport case Infrared camera with lens Base support Cable tie (2 ea.) Ethernet cable CAT-6, 2m/6.6 ft (2 ea.) FLIR ResearchIR Standard 4 Focus adjustment tool Gooseneck Mains cable kit (UK,EU,US) PoE Injector (power over Ethernet) Printed documentation Table stand

#T559770; r. AI/37003/37003; en-US 97

Technical data13

Shipping information

Packaging, weight 5.3 kg (11.7 lb.)

Packaging, size 370 180 320 mm (14.6 7.1 12.6 in.)

EAN-13 7332558010624

UPC-12 845188011291

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 98

Technical data13

13.23 FLIR A65 f=25 mm

P/N: 73425-0101 Rev.: 35207 General description

The FLIR A65 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 640 512 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 640 512 pixel images streamed at 30 Hz, signal linear 14-bit 640 512 pixel images streamed at 30 Hz, signal and temperature linear Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 640 512 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 25 20

Focal length 25 mm (0.98 in.)

Spatial resolution (IFOV) 0.68 mrad

F-number 1.25

Image frequency 30 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 17 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 99

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 30 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 640 512 pixels @ 30 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 100

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Printed documentation

Packaging, weight

Packaging, size 295 200 105 mm (11.6 7.9 4.1 in.)

EAN-13 7332558010600

UPC-12 845188011277

Country of origin Sweden

#T559770; r. AI/37003/37003; en-US 101

Technical data13

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 102

Technical data13

13.24 FLIR A65 f=13 mm

P/N: 73413-0101 Rev.: 35207 General description

The FLIR A65 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 640 512 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 640 512 pixel images streamed at 30 Hz, signal linear 14-bit 640 512 pixel images streamed at 30 Hz, signal and temperature linear Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 640 512 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 45 37

Focal length 13 mm (0.5 in.)

Spatial resolution (IFOV) 1.31 mrad

F-number 1.25

Image frequency 30 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 17 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 103

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 30 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 640 512 pixels @ 30 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 104

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Focus adjustment tool Printed documentation

Packaging, weight

Packaging, size 295 200 105 mm (11.6 7.9 4.1 in.)

EAN-13 7332558010594

UPC-12 845188011260

Country of origin Estonia

#T559770; r. AI/37003/37003; en-US 105

Technical data13

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 106

Technical data13

13.25 FLIR A65 f=13 mm (7.5 Hz)

P/N: 73513-0101 Rev.: 35207 General description

The FLIR A65 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 640 512 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 640 512 pixel images streamed at 7.5 Hz, signal linear 14-bit 640 512 pixel images streamed at 7.5 Hz, signal and temperature linear Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 640 512 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 45 37

Focal length 13 mm (0.5 in.)

Spatial resolution (IFOV) 1.31 mrad

F-number 1.25

Image frequency 7.5 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 17 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 107

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 7.5 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 640 512 pixels @ 7.5 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 108

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Focus adjustment tool Printed documentation

Packaging, weight

Packaging, size 295 200 105 mm (11.6 7.9 4.1 in.)

EAN-13 7332558010617

UPC-12 845188011284

Country of origin Sweden

#T559770; r. AI/37003/37003; en-US 109

Technical data13

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 110

Technical data13

13.26 FLIR A65 f=25 mm (7.5 Hz)

P/N: 73525-0101 Rev.: 35207 General description

The FLIR A65 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 640 512 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact (40 mm 43 mm 106 mm). GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 640 512 pixel images streamed at 7.5 Hz, signal linear 14-bit 640 512 pixel images streamed at 7.5 Hz, signal and temperature linear Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 640 512 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 25 20

Focal length 25 mm (0.98 in.)

Spatial resolution (IFOV) 0.68 mrad

F-number 1.25

Image frequency 7.5 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 17 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 111

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 7.5 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 640 512 pixels @ 7.5 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 112

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +50C (+5F to +122F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC 60068-2-6)

Physical data

Weight 0.200 kg (0.44 lb.)

Camera size (L W H) 106 40 43 mm (4.2 1.6 1.7 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Printed documentation

Packaging, weight

Packaging, size 295 200 105 mm (11.6 7.9 4.1 in.)

EAN-13 7332558010631

UPC-12 845188011307

Country of origin Sweden

#T559770; r. AI/37003/37003; en-US 113

Technical data13

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 114

Technical data13

13.27 FLIR A65 FOV 90 (30 Hz, ver. 2016)

P/N: 75007-0101 Rev.: 36994 General description

The FLIR A65 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 640 512 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact. GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 640 512 pixel images streamed at 30 Hz, signal linear 14-bit 640 512 pixel images streamed at 30 Hz, signal and temperature linear Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 640 512 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 90 69

Focal length 7.5 mm (0.30 in.)

Spatial resolution (IFOV) 2.27 mrad

F-number 1.4

Image frequency 30 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 17 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 115

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 30 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 640 512 pixels @ 30 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 116

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +60C (+5F to +140F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC60068-2-6) and MIL-STD810G

Physical data

Camera size (L W H) 104.1 49.6 46.6 mm (4.1 1.9 1.8 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Focus adjustment tool Printed documentation

EAN-13 7332558011621

UPC-12 845188012571

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support

#T559770; r. AI/37003/37003; en-US 117

Technical data13

T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198342ACC; Focus adjustment tool T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 118

Technical data13

13.28 FLIR A65 FOV 6.2 (30 Hz, ver. 2016)

P/N: 75010-0101 Rev.: 36998 General description

The FLIR A65 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 640 512 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 640 512 pixel images streamed at 30 Hz, signal linear 14-bit 640 512 pixel images streamed at 30 Hz, signal and temperature linear Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 640 512 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 6.2 4.96

Focal length 100 mm (4 in.)

Spatial resolution (IFOV) 0.170 mrad

F-number 1.6

Image frequency 30 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 17 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 119

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 30 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 640 512 pixels @ 30 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 120

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +60C (+5F to +140F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC60068-2-6) and MIL-STD810G

Physical data

Camera size (L W H) 196.4 82.0 82.0 mm (7.7 3.2 3.2 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Printed documentation

EAN-13 7332558012321

UPC-12 845188013431

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US)

#T559770; r. AI/37003/37003; en-US 121

Technical data13

T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 122

Technical data13

13.29 FLIR A65 FOV 45 (30 Hz, ver. 2016)

P/N: 75013-0101 Rev.: 36999 General description

The FLIR A65 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 640 512 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 640 512 pixel images streamed at 30 Hz, signal linear 14-bit 640 512 pixel images streamed at 30 Hz, signal and temperature linear Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 640 512 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 45 37

Focal length 13 mm (0.5 in.)

Spatial resolution (IFOV) 1.31 mrad

F-number 1.25

Image frequency 30 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 17 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 123

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 30 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 640 512 pixels @ 30 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 124

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +60C (+5F to +140F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC60068-2-6) and MIL-STD810G

Physical data

Camera size (L W H) 104.1 49.6 46.6 mm (4.1 1.9 1.8 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Focus adjustment tool Printed documentation

EAN-13 7332558011102

UPC-12 845188011970

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support

#T559770; r. AI/37003/37003; en-US 125

Technical data13

T198348; Cable kit Mains (UK,EU,US) T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198342ACC; Focus adjustment tool T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 126

Technical data13

13.30 FLIR A65 FOV 25 (30 Hz, ver. 2016)

P/N: 75025-0101 Rev.: 37000 General description

The FLIR A65 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 640 512 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact. GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 640 512 pixel images streamed at 30 Hz, signal linear 14-bit 640 512 pixel images streamed at 30 Hz, signal and temperature linear Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 640 512 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 25 20

Focal length 25 mm (0.98 in.)

Spatial resolution (IFOV) 0.68 mrad

F-number 1.25

Image frequency 30 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 17 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 127

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 30 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 640 512 pixels @ 30 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 128

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +60C (+5F to +140F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC60068-2-6) and MIL-STD810G

Physical data

Camera size (L W H) 107.8 49.6 46.6 mm (4.2 1.9 1.8 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Printed documentation

EAN-13 7332558011119

UPC-12 845188011987

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US)

#T559770; r. AI/37003/37003; en-US 129

Technical data13

T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198342ACC; Focus adjustment tool T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 130

Technical data13

13.31 FLIR A65 FOV 12.4 (30 Hz, ver. 2016)

P/N: 75050-0101 Rev.: 37001 General description

The FLIR A65 has features and functions that make it the natural choice for anyone who uses PC soft- ware to solve problems and for whom 640 512 pixel resolution is sufficient.

Among its main features are GigE Vision and GenICam compliance, which makes it plug-and-play when used with software packages such as IMAQ Vision and Halcon.

Key features:

Very affordable. Compact GigE Vision and GenICam compliant. GigE Vision lockable connector. PoE (power over Ethernet). 8-bit 640 512 pixel images streamed at 30 Hz, signal linear 14-bit 640 512 pixel images streamed at 30 Hz, signal and temperature linear Synchronization between cameras possible. 1x+1x GPIO. Compliant with any software that supports GenICam, including National Instruments IMAQ Vision,

Stemmers Common Vision Blox, and COGNEX Vision Pro.

Typical applications:

Automation and thermal machine vision. Entry level high-speed R&D.

Imaging and optical data

IR resolution 640 512 pixels

Thermal sensitivity/NETD < 0.05C @ +30C (+86F) / 50 mK

Field of view (FOV) 12.4 9.92

Focal length 50 mm (2 in.)

Spatial resolution (IFOV) 0.340 mrad

F-number 1.2

Image frequency 30 Hz

Focus Fixed

Detector data

Detector type Focal plane array (FPA), uncooled VOX microbolometer

Spectral range 7.513 m

Detector pitch 17 m

Detector time constant Typical 12 ms

Measurement

Object temperature range 25 to +135C (13 to 275F) 40 to +550C (40 to +1022F)

Accuracy 5C (9F) or 5% of reading

#T559770; r. AI/37003/37003; en-US 131

Technical data13

Measurement analysis

Atmospheric transmission correction Automatic, based on inputs for distance, atmos- pheric temperature and relative humidity

Optics transmission correction Automatic, based on signals from internal sensors

Emissivity correction Variable from 0.5 to 1.0

Reflected apparent temperature correction Automatic, based on input of reflected temperature

External optics/windows correction Automatic, based on input of optics/window trans- mission and temperature

Measurement corrections Global object parameters

Ethernet

Ethernet Control and image

Ethernet, type Gigabit Ethernet

Ethernet, standard IEEE 802.3

Ethernet, connector type RJ-45

Ethernet, communication GigE Vision ver. 1.2

Client API GenICam compliant

Ethernet, image streaming 8-bit monochrome @ 30 Hz

Signal linear/ DDE Automatic/ Manual Flip H&V

14-bit 640 512 pixels @ 30 Hz

Signal linear/ DDE Temperature linear

GigE Vision and GenICam compatible

Ethernet, power Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet, protocols TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Digital input/output

Digital input, purpose General purpose

Digital input 1 opto-isolated, 0 <1.2 VDC, 1 = 225 VDC.

Digital output, purpose General purpose output to ext. device (program- matically set)

Digital output 1 opto-isolated, 240 VDC, max. 185 mA

Digital I/O, isolation voltage 500 VRMS

Digital I/O, supply voltage 240 VDC, max. 200 mA

Digital I/O, connector type 12-pole M12 connector (shared with Digital syn- chronization and External power)

Synchronization in, purpose Frame synchronization in to control camera

Synchronization in 1, non-isolated

Synchronization in, type LVC Buffer @3.3V, 0 <0.8 V, 1>2.0 V.

Synchronization out, purpose Frame synchronization out to control another FLIR Ax5 camera

Synchronization out 1, non-isolated

#T559770; r. AI/37003/37003; en-US 132

Technical data13

Digital input/output

Synchronization out, type LVC Buffer @ 3.3V, 0=24 MA max, 1= 24 mA max.

Digital synchronization, connector type 12-pole M12 connector (shared with Digital I/O and External power)

Power system

External power operation 12/24 VDC, < 3.5 W nominal < 6.0 W absolute max.

External power, connector type 12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

Voltage Allowed range 1030 VDC

Environmental data

Operating temperature range 15C to +60C (+5F to +140F)

NOTE

The operating temperature range assumes that the camera is mounted on the base support (in- cluded in the package) or a similar type of heatsink.

Storage temperature range 40C to +70C (40F to +158F)

Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25C to +40C (+77F to +104F)

EMC EN 61000-6-2 (Immunity) EN 61000-6-3 (Emission) FCC 47 CFR Part 15 Class B (Emission)

Encapsulation IP 40 (IEC 60529) with base support mounted

Shock 25 g (IEC 60068-2-27)

Vibration 2 g (IEC60068-2-6) and MIL-STD810G

Physical data

Camera size (L W H) 144.1 58.4 58.4 mm (5.7 2.3 2.3 in.)

Tripod mounting UNC "-20 (on three sides)

Base mounting 4 M3 thread mounting holes (bottom)

Housing material Magnesium and aluminum

Shipping information

Packaging, type Cardboard box

List of contents Infrared camera with lens Base support Printed documentation

EAN-13 7332558012314

UPC-12 845188013424

Country of origin Sweden

Supplies & accessories:

T951004ACC; Ethernet cable CAT6, 2 m/6.6 ft. T198349; Base support T198348; Cable kit Mains (UK,EU,US)

#T559770; r. AI/37003/37003; en-US 133

Technical data13

T198392; Table stand kit T911183; Gigabit PoE injector 16 W, with multi-plugs T127605ACC; Cable M12 Pigtail T127606ACC; Cable M12 Sync T198594ACC; Transport case Ax5 T199356; FLIR Ax5 accessory starter kit T198584; FLIR Tools T198583; FLIR Tools+ (download card incl. license key) DSW-10000; FLIR IR Camera Player T199233; FLIR Atlas SDK for .NET T199234; FLIR Atlas SDK for MATLAB

#T559770; r. AI/37003/37003; en-US 134

Mechanical drawings14

#T559770; r. AI/37003/37003; en-US 135

1,69 43

1,

57 40

0,91 23

0,

79 20

4,

1 10

4, 1

0,

54 13

,7

2,

83 72

C on

ne ct

or G

P I/

O M

12 1

2- pi

n

2 x

M 2

0,

79 20

0,

31 8

0,53 13,4

1,26 32,1

0,

05 1, 2

LE D

P ow

er in

di ca

to r

C on

ne ct

or E

th er

ne t

R J4

5

1,

77

0, 00

4 45

0,

1

0,

47 12

0,55 0,004

14 0,1

1,38 35

0,28

7

1,

2 30

,5

4x M

3 D

ep th

m ax

4 m

m B

as ic

d im

en si

on s

fo r c

am er

as w

ith fo

ca l l

en gt

h: f=

7 ,5

m m

f= 9

m m

f= 13

m m

f= 19

m m

D r

e j a

nn at

a ng

es /U

nl es

s ot

he rw

is e

st at

ed

Ka nt

er b

ru tn

a Ed

ge s

br ok

en

H l

k ls

ra di

er

R a

m

Fi lle

t r ad

ii

Yt j

m nh

et /R

ou gh

ne ss

Bl ad

/S he

et

R ev

R itn

n r/D

ra w

in g

N o

Ar tN

o.

Sk al

a/ Sc

al e

Si ze

D at

um /D

at e

Ko nt

r/C he

ck Ko

ns tr/

D ra

w n

M at

er ia

l

Yt be

ha nd

lin g/

Su rfa

ce tr

ea tm

en t

G en

to l

Be n

m ni

ng /D

en om

in at

io n

Denna handling fr ej delges annan, kopieras i sin helhet eller delar utan vrt medgivande . vertrdelse hrav beivras med std av gllande lag. FLIR SYSTEMS AB

This document must not be communicated or copied completely or in part, without our permission. Any infringement will lead to legal proceedings. FLIR SYSTEMS AB

A3 U

td ra

g ur

/E xc

er pt

fr om

IS O

2 76

8- m

0 ,1

0 ,2

0 ,3

0 ,5

0 ,8

(4 00

)-1 00

0 (1

20 )-4

00 (3

0) -1

20 (6

)-3 0

0, 5-

6IS O

2 76

8- m

K 1(

7) 1:

1

-

P. M

AR C

U S

A T1

28 11

6 f=

7, 5

m m

to f=

10 0

m m

Ba si

c di

m en

si on

s Ax

5

M AB

R 20

14 -0

1- 29

20 14

-0 2-

11

P. M

AR C

U S

n dr

ad a

v/ M

od ifi

ed b

y n

dr ad

/M od

ifi ed

1 2

3 4

5 6

7 8

9 10

A B C D E F G H

1 3

2 5

4

C FB D GEA

-

1,3 33

1,

34 34

0,4 10

4,

1 10

4

0,

28 7

2,

17 55

0,

81 20

,5

0,

55 14

3 /8

"- 16

1

/4 "-

20

B as

ic d

im en

si on

s fo

r ad

d- on

b as

e su

pp or

t

D r

e j a

nn at

a ng

es /U

nl es

s ot

he rw

is e

st at

ed

Ka nt

er b

ru tn

a Ed

ge s

br ok

en

H l

k ls

ra di

er

R a

m

Fi lle

t r ad

ii

Yt j

m nh

et /R

ou gh

ne ss

Bl ad

/S he

et

R ev

R itn

n r/D

ra w

in g

N o

Ar tN

o.

Sk al

a/ Sc

al e

Si ze

D at

um /D

at e

Ko nt

r/C he

ck Ko

ns tr/

D ra

w n

M at

er ia

l

Yt be

ha nd

lin g/

Su rfa

ce tr

ea tm

en t

G en

to l

Be n

m ni

ng /D

en om

in at

io n

Denna handling fr ej delges annan, kopieras i sin helhet eller delar utan vrt medgivande . vertrdelse hrav beivras med std av gllande lag. FLIR SYSTEMS AB

This document must not be communicated or copied completely or in part, without our permission. Any infringement will lead to legal proceedings. FLIR SYSTEMS AB

A3 U

td ra

g ur

/E xc

er pt

fr om

IS O

2 76

8- m

0 ,1

0 ,2

0 ,3

0 ,5

0 ,8

(4 00

)-1 00

0 (1

20 )-4

00 (3

0) -1

20 (6

)-3 0

0, 5-

6IS O

2 76

8- m

K 2(

7) 1:

1

-

P. M

AR C

U S

A T1

28 11

6 f=

7, 5

m m

to f=

10 0

m m

Ba si

c di

m en

si on

s Ax

5

M AB

R 20

14 -0

1- 29

20 14

-0 2-

11

P. M

AR C

U S

n dr

ad a

v/ M

od ifi

ed b

y n

dr ad

/M od

ifi ed

1 2

3 4

5 6

7 8

9 10

A B C D E F G H

1 3

2 5

4

C FB D GEA

-

1,31 33,3

1,5 38,1

1, 29

+ 0, 04

0, 00

32 ,8

+ 1 0

0,

59 15

B as

ic d

im en

si on

s: C

am er

a w

ith fo

ca l l

en gt

h f=

25 m

m IR

le ns

. O

nl y

di m

en si

on s

va lid

fo r

th is

IR le

ns .

Fo r a

ll ot

he r d

im en

si on

s se

e pa

ge s

1 an

d 2.

D r

e j a

nn at

a ng

es /U

nl es

s ot

he rw

is e

st at

ed

Ka nt

er b

ru tn

a Ed

ge s

br ok

en

H l

k ls

ra di

er

R a

m

Fi lle

t r ad

ii

Yt j

m nh

et /R

ou gh

ne ss

Bl ad

/S he

et

R ev

R itn

n r/D

ra w

in g

N o

Ar tN

o.

Sk al

a/ Sc

al e

Si ze

D at

um /D

at e

Ko nt

r/C he

ck Ko

ns tr/

D ra

w n

M at

er ia

l

Yt be

ha nd

lin g/

Su rfa

ce tr

ea tm

en t

G en

to l

Be n

m ni

ng /D

en om

in at

io n

Denna handling fr ej delges annan, kopieras i sin helhet eller delar utan vrt medgivande . vertrdelse hrav beivras med std av gllande lag. FLIR SYSTEMS AB

This document must not be communicated or copied completely or in part, without our permission. Any infringement will lead to legal proceedings. FLIR SYSTEMS AB

A3 U

td ra

g ur

/E xc

er pt

fr om

IS O

2 76

8- m

0 ,1

0 ,2

0 ,3

0 ,5

0 ,8

(4 00

)-1 00

0 (1

20 )-4

00 (3

0) -1

20 (6

)-3 0

0, 5-

6IS O

2 76

8- m

K 3(

7) 1:

1

-

P. M

AR C

U S

A T1

28 11

6 f=

7, 5

m m

to f=

10 0

m m

Ba si

c di

m en

si on

s Ax

5

M AB

R 20

14 -0

1- 29

20 14

-0 2-

11

P. M

AR C

U S

n dr

ad a

v/ M

od ifi

ed b

y n

dr ad

/M od

ifi ed

1 2

3 4

5 6

7 8

9 10

A B C D E F G H

1 3

2 5

4

C FB D GEA

-

1, 68

+ 0, 04

0, 00

42 ,8

+ 1 0

1, 77

+ 0, 04

0, 00

45 + 1 0

B as

ic d

im en

si on

s: C

am er

a w

ith fo

ca l l

en gt

h f=

35 m

m IR

le ns

. O

nl y

di m

en si

on s

va lid

fo r

th is

IR le

ns .

Fo r a

ll ot

he r d

im en

si on

s se

e pa

ge s

1 an

d 2.

D r

e j a

nn at

a ng

es /U

nl es

s ot

he rw

is e

st at

ed

Ka nt

er b

ru tn

a Ed

ge s

br ok

en

H l

k ls

ra di

er

R a

m

Fi lle

t r ad

ii

Yt j

m nh

et /R

ou gh

ne ss

Bl ad

/S he

et

R ev

R itn

n r/D

ra w

in g

N o

Ar tN

o.

Sk al

a/ Sc

al e

Si ze

D at

um /D

at e

Ko nt

r/C he

ck Ko

ns tr/

D ra

w n

M at

er ia

l

Yt be

ha nd

lin g/

Su rfa

ce tr

ea tm

en t

G en

to l

Be n

m ni

ng /D

en om

in at

io n

Denna handling fr ej delges annan, kopieras i sin helhet eller delar utan vrt medgivande . vertrdelse hrav beivras med std av gllande lag. FLIR SYSTEMS AB

This document must not be communicated or copied completely or in part, without our permission. Any infringement will lead to legal proceedings. FLIR SYSTEMS AB

A3 U

td ra

g ur

/E xc

er pt

fr om

IS O

2 76

8- m

0 ,1

0 ,2

0 ,3

0 ,5

0 ,8

(4 00

)-1 00

0 (1

20 )-4

00 (3

0) -1

20 (6

)-3 0

0, 5-

6IS O

2 76

8- m

K 4(

7) 1:

1

-

P. M

AR C

U S

A T1

28 11

6 f=

7, 5

m m

to f=

10 0

m m

Ba si

c di

m en

si on

s Ax

5

M AB

R 20

14 -0

1- 29

20 14

-0 2-

11

P. M

AR C

U S

n dr

ad a

v/ M

od ifi

ed b

y n

dr ad

/M od

ifi ed

1 2

3 4

5 6

7 8

9 10

A B C D E F G H

1 3

2 5

4

C FB D GEA

-

2, 3

+ 0, 04

0, 00

58 ,4

+ 1 0

2, 76

+ 0, 04

0, 00

70 ,1

+ 1 0

B as

ic d

im en

si on

s: C

am er

a w

ith fo

ca l l

en gt

h f=

50 m

m IR

le ns

. O

nl y

di m

en si

on s

va lid

fo r

th is

IR le

ns .

Fo r a

ll ot

he r d

im en

si on

s se

e pa

ge s

1 an

d 2.

D r

e j a

nn at

a ng

es /U

nl es

s ot

he rw

is e

st at

ed

Ka nt

er b

ru tn

a Ed

ge s

br ok

en

H l

k ls

ra di

er

R a

m

Fi lle

t r ad

ii

Yt j

m nh

et /R

ou gh

ne ss

Bl ad

/S he

et

R ev

R itn

n r/D

ra w

in g

N o

Ar tN

o.

Sk al

a/ Sc

al e

Si ze

D at

um /D

at e

Ko nt

r/C he

ck Ko

ns tr/

D ra

w n

M at

er ia

l

Yt be

ha nd

lin g/

Su rfa

ce tr

ea tm

en t

G en

to l

Be n

m ni

ng /D

en om

in at

io n

Denna handling fr ej delges annan, kopieras i sin helhet eller delar utan vrt medgivande . vertrdelse hrav beivras med std av gllande lag. FLIR SYSTEMS AB

This document must not be communicated or copied completely or in part, without our permission. Any infringement will lead to legal proceedings. FLIR SYSTEMS AB

A3 U

td ra

g ur

/E xc

er pt

fr om

IS O

2 76

8- m

0 ,1

0 ,2

0 ,3

0 ,5

0 ,8

(4 00

)-1 00

0 (1

20 )-4

00 (3

0) -1

20 (6

)-3 0

0, 5-

6IS O

2 76

8- m

K 5(

7) 1:

1

-

P. M

AR C

U S

A T1

28 11

6 f=

7, 5

m m

to f=

10 0

m m

Ba si

c di

m en

si on

s Ax

5

M AB

R 20

14 -0

1- 29

20 14

-0 2-

11

P. M

AR C

U S

n dr

ad a

v/ M

od ifi

ed b

y n

dr ad

/M od

ifi ed

1 2

3 4

5 6

7 8

9 10

A B C D E F G H

1 3

2 5

4

C FB D GEA

-

2, 65

+ 0, 04

0, 00

67 ,2

+ 1 0

2, 42 61

,4

B as

ic d

im en

si on

s: C

am er

a w

ith fo

ca l l

en gt

h f=

60 m

m IR

le ns

. O

nl y

di m

en si

on s

va lid

fo r

th is

IR le

ns .

Fo r a

ll ot

he r d

im en

si on

s se

e pa

ge s

1 an

d 2.

D r

e j a

nn at

a ng

es /U

nl es

s ot

he rw

is e

st at

ed

Ka nt

er b

ru tn

a Ed

ge s

br ok

en

H l

k ls

ra di

er

R a

m

Fi lle

t r ad

ii

Yt j

m nh

et /R

ou gh

ne ss

Bl ad

/S he

et

R ev

R itn

n r/D

ra w

in g

N o

Ar tN

o.

Sk al

a/ Sc

al e

Si ze

D at

um /D

at e

Ko nt

r/C he

ck Ko

ns tr/

D ra

w n

M at

er ia

l

Yt be

ha nd

lin g/

Su rfa

ce tr

ea tm

en t

G en

to l

Be n

m ni

ng /D

en om

in at

io n

Denna handling fr ej delges annan, kopieras i sin helhet eller delar utan vrt medgivande . vertrdelse hrav beivras med std av gllande lag. FLIR SYSTEMS AB

This document must not be communicated or copied completely or in part, without our permission. Any infringement will lead to legal proceedings. FLIR SYSTEMS AB

A3 U

td ra

g ur

/E xc

er pt

fr om

IS O

2 76

8- m

0 ,1

0 ,2

0 ,3

0 ,5

0 ,8

(4 00

)-1 00

0 (1

20 )-4

00 (3

0) -1

20 (6

)-3 0

0, 5-

6IS O

2 76

8- m

K 6(

7) 1:

1

-

P. M

AR C

U S

A T1

28 11

6 f=

7, 5

m m

to f=

10 0

m m

Ba si

c di

m en

si on

s Ax

5

M AB

R 20

14 -0

1- 29

20 14

-0 2-

11

P. M

AR C

U S

n dr

ad a

v/ M

od ifi

ed b

y n

dr ad

/M od

ifi ed

1 2

3 4

5 6

7 8

9 10

A B C D E F G H

1 3

2 5

4

C FB D GEA

-

4, 8

+ 0, 04

0, 00

12 2

+ 1 0

1, 48

+ 0, 04

0, 00

37 ,5

+ 1 0

3, 23 82

4 x

M 3

2, 68 68

S ca

le 1

:2

B as

ic d

im en

si on

s: C

am er

a w

ith fo

ca l l

en gt

h f=

10 0

m m

IR le

ns .

O nl

y di

m en

si on

s va

lid fo

r th

is IR

le ns

. Fo

r a ll

ot he

r d im

en si

on s

se e

pa ge

s 1

an d

2.

D r

e j a

nn at

a ng

es /U

nl es

s ot

he rw

is e

st at

ed

Ka nt

er b

ru tn

a Ed

ge s

br ok

en

H l

k ls

ra di

er

R a

m

Fi lle

t r ad

ii

Yt j

m nh

et /R

ou gh

ne ss

Bl ad

/S he

et

R ev

R itn

n r/D

ra w

in g

N o

Ar tN

o.

Sk al

a/ Sc

al e

Si ze

D at

um /D

at e

Ko nt

r/C he

ck Ko

ns tr/

D ra

w n

M at

er ia

l

Yt be

ha nd

lin g/

Su rfa

ce tr

ea tm

en t

G en

to l

Be n

m ni

ng /D

en om

in at

io n

Denna handling fr ej delges annan, kopieras i sin helhet eller delar utan vrt medgivande . vertrdelse hrav beivras med std av gllande lag. FLIR SYSTEMS AB

This document must not be communicated or copied completely or in part, without our permission. Any infringement will lead to legal proceedings. FLIR SYSTEMS AB

A3 U

td ra

g ur

/E xc

er pt

fr om

IS O

2 76

8- m

0 ,1

0 ,2

0 ,3

0 ,5

0 ,8

(4 00

)-1 00

0 (1

20 )-4

00 (3

0) -1

20 (6

)-3 0

0, 5-

6IS O

2 76

8- m

K 7(

7) 1:

1

-

P. M

AR C

U S

A T1

28 11

6 f=

7, 5

m m

to f=

10 0

m m

Ba si

c di

m en

si on

s Ax

5

M AB

R 20

14 -0

1- 29

20 14

-0 2-

11

P. M

AR C

U S

n dr

ad a

v/ M

od ifi

ed b

y n

dr ad

/M od

ifi ed

1 2

3 4

5 6

7 8

9 10

A B C D E F G H

1 3

2 5

4

C FB D GEA

-

1,

83 46

,6

1,95 49,6

0,91 23,22

0,

92 23

,3

4,

1 10

4, 1

0,

54 13

,7

2,

82 72

C on

ne ct

or G

P I/

O M

12 1

2- pi

n

2 x

M 2

0,

79 20

0,

31 8

0,53 13,5

1,26 32,1

0,

05 1, 2

LE D

P ow

er in

di ca

to r

C on

ne ct

or E

th er

ne t

R J4

5

1,

77

0, 00

4 45

0,

1

0,55 0,004

14 0,1

1,38 35

0,

46 11

,7

0,28

7

1,

2 30

,5

4x M

3 D

ep th

m ax

4 m

m B

as ic

d im

en si

on s

fo r c

am er

as w

ith fo

ca l l

en gt

h: f=

7 ,5

m m

f= 9

m m

f= 13

m m

f= 19

m m

D r

e j a

nn at

a ng

es /U

nl es

s ot

he rw

is e

st at

ed

Ka nt

er b

ru tn

a Ed

ge s

br ok

en

H l

k ls

ra di

er

R a

m

Fi lle

t r ad

ii

Yt j

m nh

et /R

ou gh

ne ss

Bl ad

/S he

et

R ev

R itn

n r/D

ra w

in g

N o

Ar tN

o.

Sk al

a/ Sc

al e

Si ze

D at

um /D

at e

Ko nt

r/C he

ck Ko

ns tr/

D ra

w n

M at

er ia

l

Yt be

ha nd

lin g/

Su rfa

ce tr

ea tm

en t

G en

to l

Be n

m ni

ng /D

en om

in at

io n

Denna handling fr ej delges annan, kopieras i sin helhet eller delar utan vrt medgivande . vertrdelse hrav beivras med std av gllande lag. FLIR SYSTEMS AB

This document must not be communicated or copied completely or in part, without our permission. Any infringement will lead to legal proceedings. FLIR SYSTEMS AB

A3 U

td ra

g ur

/E xc

er pt

fr om

IS O

2 76

8- m

0 ,1

0 ,2

0 ,3

0 ,5

0 ,8

(4 00

)-1 00

0 (1

20 )-4

00 (3

0) -1

20 (6

)-3 0

0, 5-

6IS O

2 76

8- m

K 1(

7) 1:

1

-

P. M

AR C

U S

-.0 02

T1 29

29 7

f= 7,

5 m

m to

f= 10

0 m

m Ba

si c

di m

en si

on s

Ax 5

w . f

la g

sh ut

te r

20 15

-1 2-

14

20 15

-1 2-

18

P. M

AR C

U S

n dr

ad a

v/ M

od ifi

ed b

y n

dr ad

/M od

ifi ed

1 2

3 4

5 6

7 8

9 10

A B C D E F G H

1 3

2 5

4

C FB D GEA

N O

T R

E LE

A S

E D

, F O

R Q

U O

TA TI

O N

O N

LY

1,3 33

1,

34 34

0,39 10

4,

1 10

4

0,

27 7

2,

17 55

0,

81 20

,5

0,

55 14

3 /8

"- 16

1

/4 "-

20

B as

ic d

im en

si on

s fo

r ad

d- on

b as

e su

pp or

t

D r

e j a

nn at

a ng

es /U

nl es

s ot

he rw

is e

st at

ed

Ka nt

er b

ru tn

a Ed

ge s

br ok

en

H l

k ls

ra di

er

R a

m

Fi lle

t r ad

ii

Yt j

m nh

et /R

ou gh

ne ss

Bl ad

/S he

et

R ev

R itn

n r/D

ra w

in g

N o

Ar tN

o.

Sk al

a/ Sc

al e

Si ze

D at

um /D

at e

Ko nt

r/C he

ck Ko

ns tr/

D ra

w n

M at

er ia

l

Yt be

ha nd

lin g/

Su rfa

ce tr

ea tm

en t

G en

to l

Be n

m ni

ng /D

en om

in at

io n

Denna handling fr ej delges annan, kopieras i sin helhet eller delar utan vrt medgivande . vertrdelse hrav beivras med std av gllande lag. FLIR SYSTEMS AB

This document must not be communicated or copied completely or in part, without our permission. Any infringement will lead to legal proceedings. FLIR SYSTEMS AB

A3 U

td ra

g ur

/E xc

er pt

fr om

IS O

2 76

8- m

0 ,1

0 ,2

0 ,3

0 ,5

0 ,8

(4 00

)-1 00

0 (1

20 )-4

00 (3

0) -1

20 (6

)-3 0

0, 5-

6IS O

2 76

8- m

K 2(

7) 1:

1

-

P. M

AR C

U S

-.0 02

T1 29

29 7

f= 7,

5 m

m to

f= 10

0 m

m Ba

si c

di m

en si

on s

Ax 5

w . f

la g

sh ut

te r

20 15

-1 2-

14

20 15

-1 2-

18

P. M

AR C

U S

n dr

ad a

v/ M

od ifi

ed b

y n

dr ad

/M od

ifi ed

1 2

3 4

5 6

7 8

9 10

A B C D E F G H

1 3

2 5

4

C FB D GEA

N O

T R

E LE

A S

E D

, F O

R Q

U O

TA TI

O N

O N

LY

1,31 33,3

1,37 34,9

0,

58 14

,7

1, 33

+ 0, 04

0, 00

33 ,8

+ 1 0

0,

69 17

,4

B as

ic d

im en

si on

s: C

am er

a w

ith fo

ca l l

en gt

h f=

25 m

m IR

le ns

. O

nl y

di m

en si

on s

va lid

fo r

th is

IR le

ns .

Fo r a

ll ot

he r d

im en

si on

s se

e pa

ge s

1 an

d 2.

D r

e j a

nn at

a ng

es /U

nl es

s ot

he rw

is e

st at

ed

Ka nt

er b

ru tn

a Ed

ge s

br ok

en

H l

k ls

ra di

er

R a

m

Fi lle

t r ad

ii

Yt j

m nh

et /R

ou gh

ne ss

Bl ad

/S he

et

R ev

R itn

n r/D

ra w

in g

N o

Ar tN

o.

Sk al

a/ Sc

al e

Si ze

D at

um /D

at e

Ko nt

r/C he

ck Ko

ns tr/

D ra

w n

M at

er ia

l

Yt be

ha nd

lin g/

Su rfa

ce tr

ea tm

en t

G en

to l

Be n

m ni

ng /D

en om

in at

io n

Denna handling fr ej delges annan, kopieras i sin helhet eller delar utan vrt medgivande . vertrdelse hrav beivras med std av gllande lag. FLIR SYSTEMS AB

This document must not be communicated or copied completely or in part, without our permission. Any infringement will lead to legal proceedings. FLIR SYSTEMS AB

A3 U

td ra

g ur

/E xc

er pt

fr om

IS O

2 76

8- m

0 ,1

0 ,2

0 ,3

0 ,5

0 ,8

(4 00

)-1 00

0 (1

20 )-4

00 (3

0) -1

20 (6

)-3 0

0, 5-

6IS O

2 76

8- m

K 3(

7) 1:

1

-

P. M

AR C

U S

-.0 02

T1 29

29 7

f= 7,

5 m

m to

f= 10

0 m

m Ba

si c

di m

en si

on s

Ax 5

w . f

la g

sh ut

te r

20 15

-1 2-

14

20 15

-1 2-

18

P. M

AR C

U S

n dr

ad a

v/ M

od ifi

ed b

y n

dr ad

/M od

ifi ed

1 2

3 4

5 6

7 8

9 10

A B C D E F G H

1 3

2 5

4

C FB D GEA

N O

T R

E LE

A S

E D

, F O

R Q

U O

TA TI

O N

O N

LY

1,77 45,01

1, 68

+ 0, 04

0, 00

42 ,8

+ 1 0

B as

ic d

im en

si on

s: C

am er

a w

ith fo

ca l l

en gt

h f=

35 m

m IR

le ns

. O

nl y

di m

en si

on s

va lid

fo r

th is

IR le

ns .

Fo r a

ll ot

he r d

im en

si on

s se

e pa

ge s

1 an

d 2.

D r

e j a

nn at

a ng

es /U

nl es

s ot

he rw

is e

st at

ed

Ka nt

er b

ru tn

a Ed

ge s

br ok

en

H l

k ls

ra di

er

R a

m

Fi lle

t r ad

ii

Yt j

m nh

et /R

ou gh

ne ss

Bl ad

/S he

et

R ev

R itn

n r/D

ra w

in g

N o

Ar tN

o.

Sk al

a/ Sc

al e

Si ze

D at

um /D

at e

Ko nt

r/C he

ck Ko

ns tr/

D ra

w n

M at

er ia

l

Yt be

ha nd

lin g/

Su rfa

ce tr

ea tm

en t

G en

to l

Be n

m ni

ng /D

en om

in at

io n

Denna handling fr ej delges annan, kopieras i sin helhet eller delar utan vrt medgivande . vertrdelse hrav beivras med std av gllande lag. FLIR SYSTEMS AB

This document must not be communicated or copied completely or in part, without our permission. Any infringement will lead to legal proceedings. FLIR SYSTEMS AB

A3 U

td ra

g ur

/E xc

er pt

fr om

IS O

2 76

8- m

0 ,1

0 ,2

0 ,3

0 ,5

0 ,8

(4 00

)-1 00

0 (1

20 )-4

00 (3

0) -1

20 (6

)-3 0

0, 5-

6IS O

2 76

8- m

K 4(

7) 1:

1

-

P. M

AR C

U S

-.0 02

T1 29

29 7

f= 7,

5 m

m to

f= 10

0 m

m Ba

si c

di m

en si

on s

Ax 5

w . f

la g

sh ut

te r

20 15

-1 2-

14

20 15

-1 2-

18

P. M

AR C

U S

n dr

ad a

v/ M

od ifi

ed b

y n

dr ad

/M od

ifi ed

1 2

3 4

5 6

7 8

9 10

A B C D E F G H

1 3

2 5

4

C FB D GEA

N O

T R

E LE

A S

E D

, F O

R Q

U O

TA TI

O N

O N

LY

2, 3

+ 0, 04

0, 00

58 ,4

+ 1 0

2, 76

+ 0, 04

0, 00

70 ,1

+ 1 0

B as

ic d

im en

si on

s: C

am er

a w

ith fo

ca l l

en gt

h f=

50 m

m IR

le ns

. O

nl y

di m

en si

on s

va lid

fo r

th is

IR le

ns .

Fo r a

ll ot

he r d

im en

si on

s se

e pa

ge s

1 an

d 2.

D r

e j a

nn at

a ng

es /U

nl es

s ot

he rw

is e

st at

ed

Ka nt

er b

ru tn

a Ed

ge s

br ok

en

H l

k ls

ra di

er

R a

m

Fi lle

t r ad

ii

Yt j

m nh

et /R

ou gh

ne ss

Bl ad

/S he

et

R ev

R itn

n r/D

ra w

in g

N o

Ar tN

o.

Sk al

a/ Sc

al e

Si ze

D at

um /D

at e

Ko nt

r/C he

ck Ko

ns tr/

D ra

w n

M at

er ia

l

Yt be

ha nd

lin g/

Su rfa

ce tr

ea tm

en t

G en

to l

Be n

m ni

ng /D

en om

in at

io n

Denna handling fr ej delges annan, kopieras i sin helhet eller delar utan vrt medgivande . vertrdelse hrav beivras med std av gllande lag. FLIR SYSTEMS AB

This document must not be communicated or copied completely or in part, without our permission. Any infringement will lead to legal proceedings. FLIR SYSTEMS AB

A3 U

td ra

g ur

/E xc

er pt

fr om

IS O

2 76

8- m

0 ,1

0 ,2

0 ,3

0 ,5

0 ,8

(4 00

)-1 00

0 (1

20 )-4

00 (3

0) -1

20 (6

)-3 0

0, 5-

6IS O

2 76

8- m

K 5(

7) 1:

1

-

P. M

AR C

U S

-.0 02

T1 29

29 7

f= 7,

5 m

m to

f= 10

0 m

m Ba

si c

di m

en si

on s

Ax 5

w . f

la g

sh ut

te r

20 15

-1 2-

14

20 15

-1 2-

18

P. M

AR C

U S

n dr

ad a

v/ M

od ifi

ed b

y n

dr ad

/M od

ifi ed

1 2

3 4

5 6

7 8

9 10

A B C D E F G H

1 3

2 5

4

C FB D GEA

N O

T R

E LE

A S

E D

, F O

R Q

U O

TA TI

O N

O N

LY

2, 65

+ 0, 04

0, 00

67 ,2

+ 1 0

2, 42

+ 0, 04

0, 00

61 ,4

+ 1 0

B as

ic d

im en

si on

s: C

am er

a w

ith fo

ca l l

en gt

h f=

60 m

m IR

le ns

. O

nl y

di m

en si

on s

va lid

fo r

th is

IR le

ns .

Fo r a

ll ot

he r d

im en

si on

s se

e pa

ge s

1 an

d 2.

D r

e j a

nn at

a ng

es /U

nl es

s ot

he rw

is e

st at

ed

Ka nt

er b

ru tn

a Ed

ge s

br ok

en

H l

k ls

ra di

er

R a

m

Fi lle

t r ad

ii

Yt j

m nh

et /R

ou gh

ne ss

Bl ad

/S he

et

R ev

R itn

n r/D

ra w

in g

N o

Ar tN

o.

Sk al

a/ Sc

al e

Si ze

D at

um /D

at e

Ko nt

r/C he

ck Ko

ns tr/

D ra

w n

M at

er ia

l

Yt be

ha nd

lin g/

Su rfa

ce tr

ea tm

en t

G en

to l

Be n

m ni

ng /D

en om

in at

io n

Denna handling fr ej delges annan, kopieras i sin helhet eller delar utan vrt medgivande . vertrdelse hrav beivras med std av gllande lag. FLIR SYSTEMS AB

This document must not be communicated or copied completely or in part, without our permission. Any infringement will lead to legal proceedings. FLIR SYSTEMS AB

A3 U

td ra

g ur

/E xc

er pt

fr om

IS O

2 76

8- m

0 ,1

0 ,2

0 ,3

0 ,5

0 ,8

(4 00

)-1 00

0 (1

20 )-4

00 (3

0) -1

20 (6

)-3 0

0, 5-

6IS O

2 76

8- m

K 6(

7) 1:

1

-

P. M

AR C

U S

-.0 02

T1 29

29 7

f= 7,

5 m

m to

f= 10

0 m

m Ba

si c

di m

en si

on s

Ax 5

w . f

la g

sh ut

te r

20 15

-1 2-

14

20 15

-1 2-

18

P. M

AR C

U S

n dr

ad a

v/ M

od ifi

ed b

y n

dr ad

/M od

ifi ed

1 2

3 4

5 6

7 8

9 10

A B C D E F G H

1 3

2 5

4

C FB D GEA

N O

T R

E LE

A S

E D

, F O

R Q

U O

TA TI

O N

O N

LY

4, 82

+ 0, 04

0, 00

12 2,

4 + 1 0

1, 48

+ 0, 04

0, 00

37 ,5

+ 1 0

3, 23

+ 0, 04

0, 00

82 + 1 0

4 x

M 3

2, 68 68

S ca

le 1

:2

B as

ic d

im en

si on

s: C

am er

a w

ith fo

ca l l

en gt

h f=

10 0

m m

IR le

ns .

O nl

y di

m en

si on

s va

lid fo

r th

is IR

le ns

. Fo

r a ll

ot he

r d im

en si

on s

se e

pa ge

s 1

an d

2.

D r

e j a

nn at

a ng

es /U

nl es

s ot

he rw

is e

st at

ed

Ka nt

er b

ru tn

a Ed

ge s

br ok

en

H l

k ls

ra di

er

R a

m

Fi lle

t r ad

ii

Yt j

m nh

et /R

ou gh

ne ss

Bl ad

/S he

et

R ev

R itn

n r/D

ra w

in g

N o

Ar tN

o.

Sk al

a/ Sc

al e

Si ze

D at

um /D

at e

Ko nt

r/C he

ck Ko

ns tr/

D ra

w n

M at

er ia

l

Yt be

ha nd

lin g/

Su rfa

ce tr

ea tm

en t

G en

to l

Be n

m ni

ng /D

en om

in at

io n

Denna handling fr ej delges annan, kopieras i sin helhet eller delar utan vrt medgivande . vertrdelse hrav beivras med std av gllande lag. FLIR SYSTEMS AB

This document must not be communicated or copied completely or in part, without our permission. Any infringement will lead to legal proceedings. FLIR SYSTEMS AB

A3 U

td ra

g ur

/E xc

er pt

fr om

IS O

2 76

8- m

0 ,1

0 ,2

0 ,3

0 ,5

0 ,8

(4 00

)-1 00

0 (1

20 )-4

00 (3

0) -1

20 (6

)-3 0

0, 5-

6IS O

2 76

8- m

K 7(

7) 1:

1

-

P. M

AR C

U S

-.0 02

T1 29

29 7

f= 7,

5 m

m to

f= 10

0 m

m Ba

si c

di m

en si

on s

Ax 5

w . f

la g

sh ut

te r

20 15

-1 2-

14

20 15

-1 2-

18

P. M

AR C

U S

n dr

ad a

v/ M

od ifi

ed b

y n

dr ad

/M od

ifi ed

1 2

3 4

5 6

7 8

9 10

A B C D E F G H

1 3

2 5

4

C FB D GEA

N O

T R

E LE

A S

E D

, F O

R Q

U O

TA TI

O N

O N

LY

CE Declaration of conformity15

#T559770; r. AI/37003/37003; en-US 150

Pin configurations and schematics

16

16.1 M12 connector pin configuration

This section specifies the pin configuration for the M12 connector at the rear of the camera.

Figure 16.1 Pin assignment M12 male connector: 12 positions, male side view.

Table 16.1 Mapping table, pin to signal

Pin Signal Explanation

1 RET_GB Camera PWR

2 PWR_GB Camera PWR +

3 SYNC_OUT LVC Buffer @ 3.3 V, 0 = 24 MA max, 1 = 24 mA max.

4 SYNC_OUT_GND = RET_GB = Camera PWR

5 SYNC_IN LVC Buffer @ 3.3 V, 0 < 0.8 V, 1 > 2.0 V

6 SYNC_IN_GND = RET_GB = Camera PWR

7 GPO+ 1 opto-isolated, 240 VDC, max. 185 mA

8 GPO = GP Input return

9 GPIO_PWR GP Output PWR. 240 VDC, max. 200 mA

10 GPIO_GND GP Ouput PWR return

11 GPI+ 1 opto-isolated, 0 < 2, 1 = 240 VDC

12 GPI- GP Input return

Cables for the M12 connector are available from FLIR Systems. See the part numbers below.

T127605, Cable M12 pigtail. T127606, Cable M12 sync.

#T559770; r. AI/37003/37003; en-US 152

Pin configurations and schematics16

16.2 Pig-tail end of cable

Figure 16.2 Mapping table, signal type to cable color.

16.3 SYNC input/output schematics

Figure 16.3 Schematics of SYNC input and output.

#T559770; r. AI/37003/37003; en-US 153

Pin configurations and schematics16

16.4 GP input/output schematics

Figure 16.4 Schematics of GP input and output.

#T559770; r. AI/37003/37003; en-US 154

Cleaning the camera17

17.1 Camera housing, cables, and other items

17.1.1 Liquids

Use one of these liquids:

Warm water A weak detergent solution

17.1.2 Equipment

A soft cloth

17.1.3 Procedure

Follow this procedure:

1. Soak the cloth in the liquid. 2. Twist the cloth to remove excess liquid. 3. Clean the part with the cloth.

CAUTION

Do not apply solvents or similar liquids to the camera, the cables, or other items. This can cause damage.

17.2 Infrared lens

17.2.1 Liquids

Use one of these liquids:

A commercial lens cleaning liquid with more than 30% isopropyl alcohol. 96% ethyl alcohol (C2H5OH).

17.2.2 Equipment

Cotton wool

17.2.3 Procedure

Follow this procedure:

1. Soak the cotton wool in the liquid. 2. Twist the cotton wool to remove excess liquid. 3. Clean the lens one time only and discard the cotton wool.

WARNING

Make sure that you read all applicable MSDS (Material Safety Data Sheets) and warning labels on con- tainers before you use a liquid: the liquids can be dangerous.

CAUTION

Be careful when you clean the infrared lens. The lens has a delicate anti-reflective coating. Do not clean the infrared lens too vigorously. This can damage the anti-reflective coating.

#T559770; r. AI/37003/37003; en-US 155

About FLIR Systems18

FLIR Systems was established in 1978 to pioneer the development of high-performance infrared imaging systems, and is the world leader in the design, manufacture, and market- ing of thermal imaging systems for a wide variety of commercial, industrial, and govern- ment applications. Today, FLIR Systems embraces five major companies with outstanding achievements in infrared technology since 1958the Swedish AGEMA Infrared Systems (formerly AGA Infrared Systems), the three United States companies Indigo Systems, FSI, and Inframetrics, and the French company Cedip.

Since 2007, FLIR Systems has acquired several companies with world-leading expertise in sensor technologies:

Extech Instruments (2007) Ifara Tecnologas (2008) Salvador Imaging (2009) OmniTech Partners (2009) Directed Perception (2009) Raymarine (2010) ICx Technologies (2010) TackTick Marine Digital Instruments (2011) Aerius Photonics (2011) Lorex Technology (2012) Traficon (2012) MARSS (2013) DigitalOptics micro-optics business (2013) DVTEL (2015)

Figure 18.1 Patent documents from the early 1960s

FLIR Systems has three manufacturing plants in the United States (Portland, OR, Boston, MA, Santa Barbara, CA) and one in Sweden (Stockholm). Since 2007 there is also a man- ufacturing plant in Tallinn, Estonia. Direct sales offices in Belgium, Brazil, China, France, Germany, Great Britain, Hong Kong, Italy, Japan, Korea, Sweden, and the USAtogether

#T559770; r. AI/37003/37003; en-US 156

About FLIR Systems18

with a worldwide network of agents and distributorssupport our international customer base.

FLIR Systems is at the forefront of innovation in the infrared camera industry. We antici- pate market demand by constantly improving our existing cameras and developing new ones. The company has set milestones in product design and development such as the in- troduction of the first battery-operated portable camera for industrial inspections, and the first uncooled infrared camera, to mention just two innovations.

Figure 18.2 1969: Thermovision Model 661. The camera weighed approximately 25 kg (55 lb.), the oscilloscope 20 kg (44 lb.), and the tripod 15 kg (33 lb.). The operator also needed a 220 VAC gen- erator set, and a 10 L (2.6 US gallon) jar with liquid nitrogen. To the left of the oscilloscope the Polaroid attachment (6 kg/13 lb.) can be seen.

Figure 18.3 2015: FLIR One, an accessory to iPhone and Android mobile phones. Weight: 90 g (3.2 oz.).

FLIR Systems manufactures all vital mechanical and electronic components of the camera systems itself. From detector design and manufacturing, to lenses and system electronics, to final testing and calibration, all production steps are carried out and supervised by our own engineers. The in-depth expertise of these infrared specialists ensures the accuracy and reliability of all vital components that are assembled into your infrared camera.

18.1 More than just an infrared camera

At FLIR Systems we recognize that our job is to go beyond just producing the best infrared camera systems. We are committed to enabling all users of our infrared camera systems to work more productively by providing them with the most powerful camerasoftware combination. Especially tailored software for predictive maintenance, R & D, and process monitoring is developed in-house. Most software is available in a wide variety of languages.

We support all our infrared cameras with a wide variety of accessories to adapt your equip- ment to the most demanding infrared applications.

18.2 Sharing our knowledge

Although our cameras are designed to be very user-friendly, there is a lot more to thermog- raphy than just knowing how to handle a camera. Therefore, FLIR Systems has founded the Infrared Training Center (ITC), a separate business unit, that provides certified training courses. Attending one of the ITC courses will give you a truly hands-on learning experience.

#T559770; r. AI/37003/37003; en-US 157

About FLIR Systems18

The staff of the ITC are also there to provide you with any application support you may need in putting infrared theory into practice.

18.3 Supporting our customers

FLIR Systems operates a worldwide service network to keep your camera running at all times. If you discover a problem with your camera, local service centers have all the equip- ment and expertise to solve it within the shortest possible time. Therefore, there is no need to send your camera to the other side of the world or to talk to someone who does not speak your language.

#T559770; r. AI/37003/37003; en-US 158

Glossary19

absorption (ab- sorption factor)

The amount of radiation absorbed by an object relative to the re- ceived radiation. A number between 0 and 1.

atmosphere The gases between the object being measured and the camera, nor- mally air.

autoadjust A function making a camera perform an internal image correction.

autopalette The IR image is shown with an uneven spread of colors, displaying cold objects as well as hot ones at the same time.

blackbody Totally non-reflective object. All its radiation is due to its own temperature.

blackbody radiator

An IR radiating equipment with blackbody properties used to calibrate IR cameras.

calculated at- mospheric transmission

A transmission value computed from the temperature, the relative hu- midity of air and the distance to the object.

cavity radiator A bottle shaped radiator with an absorbing inside, viewed through the bottleneck.

color temperature

The temperature for which the color of a blackbody matches a specif- ic color.

conduction The process that makes heat diffuse into a material.

continuous adjust

A function that adjusts the image. The function works all the time, continuously adjusting brightness and contrast according to the im- age content.

convection Convection is a heat transfer mode where a fluid is brought into mo- tion, either by gravity or another force, thereby transferring heat from one place to another.

dual isotherm An isotherm with two color bands, instead of one. emissivity (emissivity factor)

The amount of radiation coming from an object, compared to that of a blackbody. A number between 0 and 1.

emittance Amount of energy emitted from an object per unit of time and area (W/m2)

environment Objects and gases that emit radiation towards the object being measured.

estimated at- mospheric transmission

A transmission value, supplied by a user, replacing a calculated one

external optics Extra lenses, filters, heat shields etc. that can be put between the camera and the object being measured.

filter A material transparent only to some of the infrared wavelengths.

FOV Field of view: The horizontal angle that can be viewed through an IR lens.

FPA Focal plane array: A type of IR detector.

graybody An object that emits a fixed fraction of the amount of energy of a blackbody for each wavelength.

#T559770; r. AI/37003/37003; en-US 159

Glossary19

IFOV Instantaneous field of view: A measure of the geometrical resolution of an IR camera.

image correc- tion (internal or external)

A way of compensating for sensitivity differences in various parts of live images and also of stabilizing the camera.

infrared Non-visible radiation, having a wavelength from about 213 m.

IR infrared isotherm A function highlighting those parts of an image that fall above, below

or between one or more temperature intervals.

isothermal cavity

A bottle-shaped radiator with a uniform temperature viewed through the bottleneck.

Laser LocatIR An electrically powered light source on the camera that emits laser ra- diation in a thin, concentrated beam to point at certain parts of the ob- ject in front of the camera.

laser pointer An electrically powered light source on the camera that emits laser ra- diation in a thin, concentrated beam to point at certain parts of the ob- ject in front of the camera.

level The center value of the temperature scale, usually expressed as a signal value.

manual adjust A way to adjust the image by manually changing certain parameters.

NETD Noise equivalent temperature difference. A measure of the image noise level of an IR camera.

noise Undesired small disturbance in the infrared image

object parameters

A set of values describing the circumstances under which the meas- urement of an object was made, and the object itself (such as emis- sivity, reflected apparent temperature, distance etc.)

object signal A non-calibrated value related to the amount of radiation received by the camera from the object.

palette The set of colors used to display an IR image.

pixel Stands for picture element. One single spot in an image.

radiance Amount of energy emitted from an object per unit of time, area and angle (W/m2/sr)

radiant power Amount of energy emitted from an object per unit of time (W)

radiation The process by which electromagnetic energy, is emitted by an object or a gas.

radiator A piece of IR radiating equipment. range The current overall temperature measurement limitation of an IR cam-

era. Cameras can have several ranges. Expressed as two blackbody temperatures that limit the current calibration.

reference temperature

A temperature which the ordinary measured values can be compared with.

reflection The amount of radiation reflected by an object relative to the received radiation. A number between 0 and 1.

#T559770; r. AI/37003/37003; en-US 160

Glossary19

relative humidity

Relative humidity represents the ratio between the current water va- pour mass in the air and the maximum it may contain in saturation conditions.

saturation color

The areas that contain temperatures outside the present level/span settings are colored with the saturation colors. The saturation colors contain an overflow color and an underflow color. There is also a third red saturation color that marks everything saturated by the de- tector indicating that the range should probably be changed.

span The interval of the temperature scale, usually expressed as a signal value.

spectral (radi- ant) emittance

Amount of energy emitted from an object per unit of time, area and wavelength (W/m2/m)

temperature difference, or difference of temperature.

A value which is the result of a subtraction between two temperature values.

temperature range

The current overall temperature measurement limitation of an IR cam- era. Cameras can have several ranges. Expressed as two blackbody temperatures that limit the current calibration.

temperature scale

The way in which an IR image currently is displayed. Expressed as two temperature values limiting the colors.

thermogram infrared image

transmission (or transmit- tance) factor

Gases and materials can be more or less transparent. Transmission is the amount of IR radiation passing through them. A number be- tween 0 and 1.

transparent isotherm

An isotherm showing a linear spread of colors, instead of covering the highlighted parts of the image.

visual Refers to the video mode of a IR camera, as opposed to the normal, thermographic mode. When a camera is in video mode it captures or- dinary video images, while thermographic images are captured when the camera is in IR mode.

#T559770; r. AI/37003/37003; en-US 161

Thermographic measurement techniques

20

20.1 Introduction

An infrared camera measures and images the emitted infrared radiation from an object. The fact that radiation is a function of object surface temperature makes it possible for the camera to calculate and display this temperature.

However, the radiation measured by the camera does not only depend on the temperature of the object but is also a function of the emissivity. Radiation also originates from the sur- roundings and is reflected in the object. The radiation from the object and the reflected ra- diation will also be influenced by the absorption of the atmosphere.

To measure temperature accurately, it is therefore necessary to compensate for the effects of a number of different radiation sources. This is done on-line automatically by the cam- era. The following object parameters must, however, be supplied for the camera:

The emissivity of the object The reflected apparent temperature The distance between the object and the camera The relative humidity Temperature of the atmosphere

20.2 Emissivity

The most important object parameter to set correctly is the emissivity which, in short, is a measure of how much radiation is emitted from the object, compared to that from a perfect blackbody of the same temperature.

Normally, object materials and surface treatments exhibit emissivity ranging from approxi- mately 0.1 to 0.95. A highly polished (mirror) surface falls below 0.1, while an oxidized or painted surface has a higher emissivity. Oil-based paint, regardless of color in the visible spectrum, has an emissivity over 0.9 in the infrared. Human skin exhibits an emissivity 0.97 to 0.98.

Non-oxidized metals represent an extreme case of perfect opacity and high reflexivity, which does not vary greatly with wavelength. Consequently, the emissivity of metals is low only increasing with temperature. For non-metals, emissivity tends to be high, and de- creases with temperature.

20.2.1 Finding the emissivity of a sample

20.2.1.1 Step 1: Determining reflected apparent temperature

Use one of the following two methods to determine reflected apparent temperature:

#T559770; r. AI/37003/37003; en-US 162

Thermographic measurement techniques20

20.2.1.1.1 Method 1: Direct method

Follow this procedure:

1. Look for possible reflection sources, considering that the incident angle = reflection an- gle (a = b).

Figure 20.1 1 = Reflection source

2. If the reflection source is a spot source, modify the source by obstructing it using a piece if cardboard.

Figure 20.2 1 = Reflection source

#T559770; r. AI/37003/37003; en-US 163

Thermographic measurement techniques20

3. Measure the radiation intensity (= apparent temperature) from the reflecting source us- ing the following settings:

Emissivity: 1.0 Dobj: 0

You can measure the radiation intensity using one of the following two methods:

Figure 20.3 1 = Reflection source Figure 20.4 1 = Reflection source

Using a thermocouple to measure reflected apparent temperature is not recommended for two important reasons:

A thermocouple does not measure radiation intensity A thermocouple requires a very good thermal contact to the surface, usually by gluing and covering the sensor by a thermal isolator.

20.2.1.1.2 Method 2: Reflector method

Follow this procedure:

1. Crumble up a large piece of aluminum foil. 2. Uncrumble the aluminum foil and attach it to a piece of cardboard of the same size. 3. Put the piece of cardboard in front of the object you want to measure. Make sure that

the side with aluminum foil points to the camera. 4. Set the emissivity to 1.0.

#T559770; r. AI/37003/37003; en-US 164

Thermographic measurement techniques20

5. Measure the apparent temperature of the aluminum foil and write it down.

Figure 20.5 Measuring the apparent temperature of the aluminum foil.

20.2.1.2 Step 2: Determining the emissivity

Follow this procedure:

1. Select a place to put the sample. 2. Determine and set reflected apparent temperature according to the previous

procedure. 3. Put a piece of electrical tape with known high emissivity on the sample. 4. Heat the sample at least 20 K above room temperature. Heating must be reasonably

even. 5. Focus and auto-adjust the camera, and freeze the image. 6. Adjust Level and Span for best image brightness and contrast. 7. Set emissivity to that of the tape (usually 0.97). 8. Measure the temperature of the tape using one of the following measurement

functions:

Isotherm (helps you to determine both the temperature and how evenly you have heated the sample)

Spot (simpler) Box Avg (good for surfaces with varying emissivity).

9. Write down the temperature. 10. Move your measurement function to the sample surface. 11. Change the emissivity setting until you read the same temperature as your previous

measurement. 12.Write down the emissivity.

Note

Avoid forced convection Look for a thermally stable surrounding that will not generate spot reflections Use high quality tape that you know is not transparent, and has a high emissivity you are certain of

This method assumes that the temperature of your tape and the sample surface are the same. If they are not, your emissivity measurement will be wrong.

#T559770; r. AI/37003/37003; en-US 165

Thermographic measurement techniques20

20.3 Reflected apparent temperature

This parameter is used to compensate for the radiation reflected in the object. If the emis- sivity is low and the object temperature relatively far from that of the reflected it will be im- portant to set and compensate for the reflected apparent temperature correctly.

20.4 Distance

The distance is the distance between the object and the front lens of the camera. This pa- rameter is used to compensate for the following two facts:

That radiation from the target is absorbed by the atmosphere between the object and the camera.

That radiation from the atmosphere itself is detected by the camera.

20.5 Relative humidity

The camera can also compensate for the fact that the transmittance is also dependent on the relative humidity of the atmosphere. To do this set the relative humidity to the correct value. For short distances and normal humidity the relative humidity can normally be left at a default value of 50%.

20.6 Other parameters

In addition, some cameras and analysis programs from FLIR Systems allow you to com- pensate for the following parameters:

Atmospheric temperature i.e. the temperature of the atmosphere between the camera and the target

External optics temperature i.e. the temperature of any external lenses or windows used in front of the camera

External optics transmittance i.e. the transmission of any external lenses or windows used in front of the camera

#T559770; r. AI/37003/37003; en-US 166

History of infrared technology21

Before the year 1800, the existence of the infrared portion of the electromagnetic spectrum wasn't even suspected. The original significance of the infrared spectrum, or simply the in- frared as it is often called, as a form of heat radiation is perhaps less obvious today than it was at the time of its discovery by Herschel in 1800.

Figure 21.1 Sir William Herschel (17381822)

The discovery was made accidentally during the search for a new optical material. Sir Wil- liam Herschel Royal Astronomer to King George III of England, and already famous for his discovery of the planet Uranus was searching for an optical filter material to reduce the brightness of the suns image in telescopes during solar observations. While testing different samples of colored glass which gave similar reductions in brightness he was in- trigued to find that some of the samples passed very little of the suns heat, while others passed so much heat that he risked eye damage after only a few seconds observation.

Herschel was soon convinced of the necessity of setting up a systematic experiment, with the objective of finding a single material that would give the desired reduction in brightness as well as the maximum reduction in heat. He began the experiment by actually repeating Newtons prism experiment, but looking for the heating effect rather than the visual distri- bution of intensity in the spectrum. He first blackened the bulb of a sensitive mercury-in- glass thermometer with ink, and with this as his radiation detector he proceeded to test the heating effect of the various colors of the spectrum formed on the top of a table by passing sunlight through a glass prism. Other thermometers, placed outside the suns rays, served as controls.

As the blackened thermometer was moved slowly along the colors of the spectrum, the temperature readings showed a steady increase from the violet end to the red end. This was not entirely unexpected, since the Italian researcher, Landriani, in a similar experiment in 1777 had observed much the same effect. It was Herschel, however, who was the first to recognize that there must be a point where the heating effect reaches a maximum, and that measurements confined to the visible portion of the spectrum failed to locate this point.

Figure 21.2 Marsilio Landriani (17461815)

#T559770; r. AI/37003/37003; en-US 167

History of infrared technology21

Moving the thermometer into the dark region beyond the red end of the spectrum, Her- schel confirmed that the heating continued to increase. The maximum point, when he found it, lay well beyond the red end in what is known today as the infrared wavelengths.

When Herschel revealed his discovery, he referred to this new portion of the electromag- netic spectrum as the thermometrical spectrum. The radiation itself he sometimes re- ferred to as dark heat, or simply the invisible rays. Ironically, and contrary to popular opinion, it wasn't Herschel who originated the term infrared. The word only began to ap- pear in print around 75 years later, and it is still unclear who should receive credit as the originator.

Herschels use of glass in the prism of his original experiment led to some early controver- sies with his contemporaries about the actual existence of the infrared wavelengths. Differ- ent investigators, in attempting to confirm his work, used various types of glass indiscriminately, having different transparencies in the infrared. Through his later experi- ments, Herschel was aware of the limited transparency of glass to the newly-discovered thermal radiation, and he was forced to conclude that optics for the infrared would prob- ably be doomed to the use of reflective elements exclusively (i.e. plane and curved mir- rors). Fortunately, this proved to be true only until 1830, when the Italian investigator, Melloni, made his great discovery that naturally occurring rock salt (NaCl) which was available in large enough natural crystals to be made into lenses and prisms is remark- ably transparent to the infrared. The result was that rock salt became the principal infrared optical material, and remained so for the next hundred years, until the art of synthetic crys- tal growing was mastered in the 1930s.

Figure 21.3 Macedonio Melloni (17981854)

Thermometers, as radiation detectors, remained unchallenged until 1829, the year Nobili invented the thermocouple. (Herschels own thermometer could be read to 0.2 C (0.036 F), and later models were able to be read to 0.05 C (0.09 F)). Then a breakthrough oc- curred; Melloni connected a number of thermocouples in series to form the first thermopile. The new device was at least 40 times as sensitive as the best thermometer of the day for detecting heat radiation capable of detecting the heat from a person standing three me- ters away.

The first so-called heat-picture became possible in 1840, the result of work by Sir John Herschel, son of the discoverer of the infrared and a famous astronomer in his own right. Based upon the differential evaporation of a thin film of oil when exposed to a heat pattern focused upon it, the thermal image could be seen by reflected light where the interference effects of the oil film made the image visible to the eye. Sir John also managed to obtain a primitive record of the thermal image on paper, which he called a thermograph.

#T559770; r. AI/37003/37003; en-US 168

History of infrared technology21

Figure 21.4 Samuel P. Langley (18341906)

The improvement of infrared-detector sensitivity progressed slowly. Another major break- through, made by Langley in 1880, was the invention of the bolometer. This consisted of a thin blackened strip of platinum connected in one arm of a Wheatstone bridge circuit upon which the infrared radiation was focused and to which a sensitive galvanometer re- sponded. This instrument is said to have been able to detect the heat from a cow at a dis- tance of 400 meters.

An English scientist, Sir James Dewar, first introduced the use of liquefied gases as cool- ing agents (such as liquid nitrogen with a temperature of -196 C (-320.8 F)) in low tem- perature research. In 1892 he invented a unique vacuum insulating container in which it is possible to store liquefied gases for entire days. The common thermos bottle, used for storing hot and cold drinks, is based upon his invention.

Between the years 1900 and 1920, the inventors of the world discovered the infrared. Many patents were issued for devices to detect personnel, artillery, aircraft, ships and even icebergs. The first operating systems, in the modern sense, began to be developed during the 191418 war, when both sides had research programs devoted to the military exploitation of the infrared. These programs included experimental systems for enemy in- trusion/detection, remote temperature sensing, secure communications, and flying torpe- do guidance. An infrared search system tested during this period was able to detect an approaching airplane at a distance of 1.5 km (0.94 miles), or a person more than 300 me- ters (984 ft.) away.

The most sensitive systems up to this time were all based upon variations of the bolometer idea, but the period between the two wars saw the development of two revolutionary new infrared detectors: the image converter and the photon detector. At first, the image con- verter received the greatest attention by the military, because it enabled an observer for the first time in history to literally see in the dark. However, the sensitivity of the image converter was limited to the near infrared wavelengths, and the most interesting military targets (i.e. enemy soldiers) had to be illuminated by infrared search beams. Since this in- volved the risk of giving away the observers position to a similarly-equipped enemy ob- server, it is understandable that military interest in the image converter eventually faded.

The tactical military disadvantages of so-called 'active (i.e. search beam-equipped) ther- mal imaging systems provided impetus following the 193945 war for extensive secret military infrared-research programs into the possibilities of developing passive (no search beam) systems around the extremely sensitive photon detector. During this period, military secrecy regulations completely prevented disclosure of the status of infrared-imaging technology. This secrecy only began to be lifted in the middle of the 1950s, and from that time adequate thermal-imaging devices finally began to be available to civilian science and industry.

#T559770; r. AI/37003/37003; en-US 169

Theory of thermography22

22.1 Introduction

The subjects of infrared radiation and the related technique of thermography are still new to many who will use an infrared camera. In this section the theory behind thermography will be given.

22.2 The electromagnetic spectrum

The electromagnetic spectrum is divided arbitrarily into a number of wavelength regions, called bands, distinguished by the methods used to produce and detect the radiation. There is no fundamental difference between radiation in the different bands of the electro- magnetic spectrum. They are all governed by the same laws and the only differences are those due to differences in wavelength.

Figure 22.1 The electromagnetic spectrum. 1: X-ray; 2: UV; 3: Visible; 4: IR; 5: Microwaves; 6: Radiowaves.

Thermography makes use of the infrared spectral band. At the short-wavelength end the boundary lies at the limit of visual perception, in the deep red. At the long-wavelength end it merges with the microwave radio wavelengths, in the millimeter range.

The infrared band is often further subdivided into four smaller bands, the boundaries of which are also arbitrarily chosen. They include: the near infrared (0.753 m), themiddle infrared (36 m), the far infrared (615 m) and the extreme infrared (15100 m). Although the wavelengths are given in m (micrometers), other units are often still used to measure wavelength in this spectral region, e.g. nanometer (nm) and ngstrm ().

The relationships between the different wavelength measurements is:

22.3 Blackbody radiation

A blackbody is defined as an object which absorbs all radiation that impinges on it at any wavelength. The apparent misnomer black relating to an object emitting radiation is ex- plained by Kirchhoffs Law (after Gustav Robert Kirchhoff, 18241887), which states that a body capable of absorbing all radiation at any wavelength is equally capable in the emis- sion of radiation.

#T559770; r. AI/37003/37003; en-US 170

Theory of thermography22

Figure 22.2 Gustav Robert Kirchhoff (18241887)

The construction of a blackbody source is, in principle, very simple. The radiation charac- teristics of an aperture in an isotherm cavity made of an opaque absorbing material repre- sents almost exactly the properties of a blackbody. A practical application of the principle to the construction of a perfect absorber of radiation consists of a box that is light tight ex- cept for an aperture in one of the sides. Any radiation which then enters the hole is scat- tered and absorbed by repeated reflections so only an infinitesimal fraction can possibly escape. The blackness which is obtained at the aperture is nearly equal to a blackbody and almost perfect for all wavelengths.

By providing such an isothermal cavity with a suitable heater it becomes what is termed a cavity radiator. An isothermal cavity heated to a uniform temperature generates blackbody radiation, the characteristics of which are determined solely by the temperature of the cav- ity. Such cavity radiators are commonly used as sources of radiation in temperature refer- ence standards in the laboratory for calibrating thermographic instruments, such as a FLIR Systems camera for example.

If the temperature of blackbody radiation increases to more than 525C (977F), the source begins to be visible so that it appears to the eye no longer black. This is the incipi- ent red heat temperature of the radiator, which then becomes orange or yellow as the tem- perature increases further. In fact, the definition of the so-called color temperature of an object is the temperature to which a blackbody would have to be heated to have the same appearance.

Now consider three expressions that describe the radiation emitted from a blackbody.

22.3.1 Plancks law

Figure 22.3 Max Planck (18581947)

Max Planck (18581947) was able to describe the spectral distribution of the radiation from a blackbody by means of the following formula:

#T559770; r. AI/37003/37003; en-US 171

Theory of thermography22

where: Wb Blackbody spectral radiant emittance at wavelength .

c Velocity of light = 3 108 m/s

h Plancks constant = 6.6 10-34 Joule sec.

k Boltzmanns constant = 1.4 10-23 Joule/K.

T Absolute temperature (K) of a blackbody.

Wavelength (m).

Note The factor 10-6 is used since spectral emittance in the curves is expressed in Watt/ m2, m. Plancks formula, when plotted graphically for various temperatures, produces a family of curves. Following any particular Planck curve, the spectral emittance is zero at = 0, then increases rapidly to a maximum at a wavelength max and after passing it approaches zero again at very long wavelengths. The higher the temperature, the shorter the wavelength at which maximum occurs.

Figure 22.4 Blackbody spectral radiant emittance according to Plancks law, plotted for various absolute temperatures. 1: Spectral radiant emittance (W/cm2 103(m)); 2: Wavelength (m)

22.3.2 Wiens displacement law

By differentiating Plancks formula with respect to , and finding the maximum, we have:

This is Wiens formula (afterWilhelm Wien, 18641928), which expresses mathematically the common observation that colors vary from red to orange or yellow as the temperature of a thermal radiator increases. The wavelength of the color is the same as the wavelength calculated for max. A good approximation of the value of max for a given blackbody

#T559770; r. AI/37003/37003; en-US 172

Theory of thermography22

temperature is obtained by applying the rule-of-thumb 3 000/T m. Thus, a very hot star such as Sirius (11 000 K), emitting bluish-white light, radiates with the peak of spectral ra- diant emittance occurring within the invisible ultraviolet spectrum, at wavelength 0.27 m.

Figure 22.5 Wilhelm Wien (18641928)

The sun (approx. 6 000 K) emits yellow light, peaking at about 0.5 m in the middle of the visible light spectrum.

At room temperature (300 K) the peak of radiant emittance lies at 9.7 m, in the far infra- red, while at the temperature of liquid nitrogen (77 K) the maximum of the almost insignifi- cant amount of radiant emittance occurs at 38 m, in the extreme infrared wavelengths.

Figure 22.6 Planckian curves plotted on semi-log scales from 100 K to 1000 K. The dotted line represents the locus of maximum radiant emittance at each temperature as described by Wien's displacement law. 1: Spectral radiant emittance (W/cm2 (m)); 2: Wavelength (m).

22.3.3 Stefan-Boltzmann's law

By integrating Plancks formula from = 0 to = , we obtain the total radiant emittance (Wb) of a blackbody:

#T559770; r. AI/37003/37003; en-US 173

Theory of thermography22

This is the Stefan-Boltzmann formula (after Josef Stefan, 18351893, and Ludwig Boltz- mann, 18441906), which states that the total emissive power of a blackbody is propor- tional to the fourth power of its absolute temperature. Graphically, Wb represents the area below the Planck curve for a particular temperature. It can be shown that the radiant emit- tance in the interval = 0 to max is only 25% of the total, which represents about the amount of the suns radiation which lies inside the visible light spectrum.

Figure 22.7 Josef Stefan (18351893), and Ludwig Boltzmann (18441906)

Using the Stefan-Boltzmann formula to calculate the power radiated by the human body, at a temperature of 300 K and an external surface area of approx. 2 m2, we obtain 1 kW. This power loss could not be sustained if it were not for the compensating absorption of ra- diation from surrounding surfaces, at room temperatures which do not vary too drastically from the temperature of the body or, of course, the addition of clothing.

22.3.4 Non-blackbody emitters

So far, only blackbody radiators and blackbody radiation have been discussed. However, real objects almost never comply with these laws over an extended wavelength region although they may approach the blackbody behavior in certain spectral intervals. For ex- ample, a certain type of white paint may appear perfectly white in the visible light spec- trum, but becomes distinctly gray at about 2 m, and beyond 3 m it is almost black.

There are three processes which can occur that prevent a real object from acting like a blackbody: a fraction of the incident radiation may be absorbed, a fraction may be re- flected, and a fraction may be transmitted. Since all of these factors are more or less wavelength dependent, the subscript is used to imply the spectral dependence of their definitions. Thus:

The spectral absorptance = the ratio of the spectral radiant power absorbed by an ob- ject to that incident upon it.

The spectral reflectance = the ratio of the spectral radiant power reflected by an ob- ject to that incident upon it.

The spectral transmittance = the ratio of the spectral radiant power transmitted through an object to that incident upon it.

The sum of these three factors must always add up to the whole at any wavelength, so we have the relation:

For opaque materials = 0 and the relation simplifies to:

Another factor, called the emissivity, is required to describe the fraction of the radiant emittance of a blackbody produced by an object at a specific temperature. Thus, we have the definition:

#T559770; r. AI/37003/37003; en-US 174

Theory of thermography22

The spectral emissivity = the ratio of the spectral radiant power from an object to that from a blackbody at the same temperature and wavelength.

Expressed mathematically, this can be written as the ratio of the spectral emittance of the object to that of a blackbody as follows:

Generally speaking, there are three types of radiation source, distinguished by the ways in which the spectral emittance of each varies with wavelength.

A blackbody, for which = = 1 A graybody, for which = = constant less than 1 A selective radiator, for which varies with wavelength

According to Kirchhoffs law, for any material the spectral emissivity and spectral absorp- tance of a body are equal at any specified temperature and wavelength. That is:

From this we obtain, for an opaque material (since + = 1):

For highly polished materials approaches zero, so that for a perfectly reflecting material (i.e. a perfect mirror) we have:

For a graybody radiator, the Stefan-Boltzmann formula becomes:

This states that the total emissive power of a graybody is the same as a blackbody at the same temperature reduced in proportion to the value of from the graybody.

Figure 22.8 Spectral radiant emittance of three types of radiators. 1: Spectral radiant emittance; 2: Wave- length; 3: Blackbody; 4: Selective radiator; 5: Graybody.

#T559770; r. AI/37003/37003; en-US 175

Theory of thermography22

Figure 22.9 Spectral emissivity of three types of radiators. 1: Spectral emissivity; 2: Wavelength; 3: Black- body; 4: Graybody; 5: Selective radiator.

22.4 Infrared semi-transparent materials

Consider now a non-metallic, semi-transparent body let us say, in the form of a thick flat plate of plastic material. When the plate is heated, radiation generated within its volume must work its way toward the surfaces through the material in which it is partially absorbed. Moreover, when it arrives at the surface, some of it is reflected back into the interior. The back-reflected radiation is again partially absorbed, but some of it arrives at the other sur- face, through which most of it escapes; part of it is reflected back again. Although the pro- gressive reflections become weaker and weaker they must all be added up when the total emittance of the plate is sought. When the resulting geometrical series is summed, the ef- fective emissivity of a semi-transparent plate is obtained as:

When the plate becomes opaque this formula is reduced to the single formula:

This last relation is a particularly convenient one, because it is often easier to measure re- flectance than to measure emissivity directly.

#T559770; r. AI/37003/37003; en-US 176

The measurement formula23

As already mentioned, when viewing an object, the camera receives radiation not only from the object itself. It also collects radiation from the surroundings reflected via the ob- ject surface. Both these radiation contributions become attenuated to some extent by the atmosphere in the measurement path. To this comes a third radiation contribution from the atmosphere itself.

This description of the measurement situation, as illustrated in the figure below, is so far a fairly true description of the real conditions. What has been neglected could for instance be sun light scattering in the atmosphere or stray radiation from intense radiation sources outside the field of view. Such disturbances are difficult to quantify, however, in most cases they are fortunately small enough to be neglected. In case they are not negligible, the measurement configuration is likely to be such that the risk for disturbance is obvious, at least to a trained operator. It is then his responsibility to modify the measurement situation to avoid the disturbance e.g. by changing the viewing direction, shielding off intense radia- tion sources etc.

Accepting the description above, we can use the figure below to derive a formula for the calculation of the object temperature from the calibrated camera output.

Figure 23.1 A schematic representation of the general thermographic measurement situation.1: Surround- ings; 2: Object; 3: Atmosphere; 4: Camera

Assume that the received radiation power W from a blackbody source of temperature Tsource on short distance generates a camera output signal Usource that is proportional to the power input (power linear camera). We can then write (Equation 1):

or, with simplified notation:

where C is a constant.

Should the source be a graybody with emittance , the received radiation would conse- quently be Wsource.

We are now ready to write the three collected radiation power terms:

1. Emission from the object = Wobj, where is the emittance of the object and is the transmittance of the atmosphere. The object temperature is Tobj.

#T559770; r. AI/37003/37003; en-US 177

The measurement formula23

2. Reflected emission from ambient sources = (1 )Wrefl, where (1 ) is the reflec- tance of the object. The ambient sources have the temperature Trefl. It has here been assumed that the temperature Trefl is the same for all emitting surfaces within the halfsphere seen from a point on the object surface. This is of course some- times a simplification of the true situation. It is, however, a necessary simplification in order to derive a workable formula, and Trefl can at least theoretically be given a val- ue that represents an efficient temperature of a complex surrounding.

Note also that we have assumed that the emittance for the surroundings = 1. This is correct in accordance with Kirchhoffs law: All radiation impinging on the surrounding surfaces will eventually be absorbed by the same surfaces. Thus the emittance = 1. (Note though that the latest discussion requires the complete sphere around the object to be considered.)

3. Emission from the atmosphere = (1 )Watm, where (1 ) is the emittance of the at- mosphere. The temperature of the atmosphere is Tatm.

The total received radiation power can now be written (Equation 2):

We multiply each term by the constant C of Equation 1 and replace the CW products by the corresponding U according to the same equation, and get (Equation 3):

Solve Equation 3 for Uobj (Equation 4):

This is the general measurement formula used in all the FLIR Systems thermographic equipment. The voltages of the formula are: Table 23.1 Voltages

Uobj Calculated camera output voltage for a blackbody of temperature Tobj i.e. a voltage that can be directly converted into true requested object temperature.

Utot Measured camera output voltage for the actual case.

Urefl Theoretical camera output voltage for a blackbody of temperature Trefl according to the calibration.

Uatm Theoretical camera output voltage for a blackbody of temperature Tatm according to the calibration.

The operator has to supply a number of parameter values for the calculation:

the object emittance , the relative humidity, Tatm object distance (Dobj) the (effective) temperature of the object surroundings, or the reflected ambient temper- ature Trefl, and

the temperature of the atmosphere Tatm This task could sometimes be a heavy burden for the operator since there are normally no easy ways to find accurate values of emittance and atmospheric transmittance for the

#T559770; r. AI/37003/37003; en-US 178

The measurement formula23

actual case. The two temperatures are normally less of a problem provided the surround- ings do not contain large and intense radiation sources.

A natural question in this connection is: How important is it to know the right values of these parameters? It could though be of interest to get a feeling for this problem already here by looking into some different measurement cases and compare the relative magni- tudes of the three radiation terms. This will give indications about when it is important to use correct values of which parameters.

The figures below illustrates the relative magnitudes of the three radiation contributions for three different object temperatures, two emittances, and two spectral ranges: SW and LW. Remaining parameters have the following fixed values:

= 0.88 Trefl = +20C (+68F) Tatm = +20C (+68F)

It is obvious that measurement of low object temperatures are more critical than measur- ing high temperatures since the disturbing radiation sources are relatively much stronger in the first case. Should also the object emittance be low, the situation would be still more difficult.

We have finally to answer a question about the importance of being allowed to use the cal- ibration curve above the highest calibration point, what we call extrapolation. Imagine that we in a certain case measure Utot = 4.5 volts. The highest calibration point for the camera was in the order of 4.1 volts, a value unknown to the operator. Thus, even if the object hap- pened to be a blackbody, i.e. Uobj = Utot, we are actually performing extrapolation of the calibration curve when converting 4.5 volts into temperature.

Let us now assume that the object is not black, it has an emittance of 0.75, and the trans- mittance is 0.92. We also assume that the two second terms of Equation 4 amount to 0.5 volts together. Computation of Uobj by means of Equation 4 then results in Uobj = 4.5 / 0.75 / 0.92 0.5 = 6.0. This is a rather extreme extrapolation, particularly when considering that the video amplifier might limit the output to 5 volts! Note, though, that the application of the calibration curve is a theoretical procedure where no electronic or other limitations exist. We trust that if there had been no signal limitations in the camera, and if it had been cali- brated far beyond 5 volts, the resulting curve would have been very much the same as our real curve extrapolated beyond 4.1 volts, provided the calibration algorithm is based on ra- diation physics, like the FLIR Systems algorithm. Of course there must be a limit to such extrapolations.

#T559770; r. AI/37003/37003; en-US 179

The measurement formula23

Figure 23.2 Relative magnitudes of radiation sources under varying measurement conditions (SW camera). 1: Object temperature; 2: Emittance; Obj: Object radiation; Refl: Reflected radiation; Atm: atmosphere radia- tion. Fixed parameters: = 0.88; Trefl = 20C (+68F); Tatm = 20C (+68F).

Figure 23.3 Relative magnitudes of radiation sources under varying measurement conditions (LW camera). 1: Object temperature; 2: Emittance; Obj: Object radiation; Refl: Reflected radiation; Atm: atmosphere radia- tion. Fixed parameters: = 0.88; Trefl = 20C (+68F); Tatm = 20C (+68F).

#T559770; r. AI/37003/37003; en-US 180

Emissivity tables24

This section presents a compilation of emissivity data from the infrared literature and measurements made by FLIR Systems.

24.1 References

1. Mikal A. Bramson: Infrared Radiation, A Handbook for Applications, Plenum press, N. Y.

2. William L. Wolfe, George J. Zissis: The Infrared Handbook, Office of Naval Research, Department of Navy, Washington, D.C.

3. Madding, R. P.: Thermographic Instruments and systems. Madison, Wisconsin: Univer- sity of Wisconsin Extension, Department of Engineering and Applied Science.

4. William L. Wolfe: Handbook of Military Infrared Technology, Office of Naval Research, Department of Navy, Washington, D.C.

5. Jones, Smith, Probert: External thermography of buildings..., Proc. of the Society of Photo-Optical Instrumentation Engineers, vol.110, Industrial and Civil Applications of Infrared Technology, June 1977 London.

6. Paljak, Pettersson: Thermography of Buildings, Swedish Building Research Institute, Stockholm 1972.

7. Vlcek, J: Determination of emissivity with imaging radiometers and some emissivities at = 5 m. Photogrammetric Engineering and Remote Sensing.

8. Kern: Evaluation of infrared emission of clouds and ground as measured by weather satellites, Defence Documentation Center, AD 617 417.

9. hman, Claes: Emittansmtningar med AGEMA E-Box. Teknisk rapport, AGEMA 1999. (Emittance measurements using AGEMA E-Box. Technical report, AGEMA 1999.)

10. Matte, S., Tang-Kwor, E: Emissivity measurements for Nextel Velvet coating 811-21 between 36C AND 82C.

11. Lohrengel & Todtenhaupt (1996) 12. ITC Technical publication 32. 13. ITC Technical publication 29. 14. Schuster, Norbert and Kolobrodov, Valentin G. Infrarotthermographie. Berlin: Wiley-

VCH, 2000.

Note The emissivity values in the table below are recorded using a shortwave (SW) cam- era. The values should be regarded as recommendations only and used with caution.

24.2 Tables Table 24.1 T: Total spectrum; SW: 25 m; LW: 814 m, LLW: 6.520 m; 1: Material; 2: Specification; 3: Temperature in C; 4: Spectrum; 5: Emissivity: 6:Reference

1 2 3 4 5 6

3M type 35 Vinyl electrical tape (several colors)

< 80 LW 0.96 13

3M type 88 Black vinyl electri- cal tape

< 105 LW 0.96 13

3M type 88 Black vinyl electri- cal tape

< 105 MW < 0.96 13

3M type Super 33 +

Black vinyl electri- cal tape

< 80 LW 0.96 13

Aluminum anodized sheet 100 T 0.55 2

Aluminum anodized, black, dull

70 SW 0.67 9

#T559770; r. AI/37003/37003; en-US 181

Emissivity tables24

Table 24.1 T: Total spectrum; SW: 25 m; LW: 814 m, LLW: 6.520 m; 1: Material; 2: Specification; 3: Temperature in C; 4: Spectrum; 5: Emissivity: 6:Reference (continued)

1 2 3 4 5 6

Aluminum anodized, black, dull

70 LW 0.95 9

Aluminum anodized, light gray, dull

70 SW 0.61 9

Aluminum anodized, light gray, dull

70 LW 0.97 9

Aluminum as received, plate 100 T 0.09 4

Aluminum as received, sheet 100 T 0.09 2

Aluminum cast, blast cleaned

70 SW 0.47 9

Aluminum cast, blast cleaned

70 LW 0.46 9

Aluminum dipped in HNO3, plate

100 T 0.05 4

Aluminum foil 27 10 m 0.04 3

Aluminum foil 27 3 m 0.09 3

Aluminum oxidized, strongly 50500 T 0.20.3 1

Aluminum polished 50100 T 0.040.06 1

Aluminum polished plate 100 T 0.05 4

Aluminum polished, sheet 100 T 0.05 2

Aluminum rough surface 2050 T 0.060.07 1

Aluminum roughened 27 10 m 0.18 3

Aluminum roughened 27 3 m 0.28 3

Aluminum sheet, 4 samples differently scratched

70 SW 0.050.08 9

Aluminum sheet, 4 samples differently scratched

70 LW 0.030.06 9

Aluminum vacuum deposited 20 T 0.04 2

Aluminum weathered, heavily

17 SW 0.830.94 5

Aluminum bronze 20 T 0.60 1

Aluminum hydroxide

powder T 0.28 1

Aluminum oxide activated, powder T 0.46 1

Aluminum oxide pure, powder (alumina)

T 0.16 1

Asbestos board 20 T 0.96 1

Asbestos fabric T 0.78 1

Asbestos floor tile 35 SW 0.94 7

Asbestos paper 40400 T 0.930.95 1

Asbestos powder T 0.400.60 1

Asbestos slate 20 T 0.96 1

#T559770; r. AI/37003/37003; en-US 182

Emissivity tables24

Table 24.1 T: Total spectrum; SW: 25 m; LW: 814 m, LLW: 6.520 m; 1: Material; 2: Specification; 3: Temperature in C; 4: Spectrum; 5: Emissivity: 6:Reference (continued)

1 2 3 4 5 6

Asphalt paving 4 LLW 0.967 8

Brass dull, tarnished 20350 T 0.22 1

Brass oxidized 100 T 0.61 2

Brass oxidized 70 SW 0.040.09 9

Brass oxidized 70 LW 0.030.07 9

Brass oxidized at 600C 200600 T 0.590.61 1

Brass polished 200 T 0.03 1

Brass polished, highly 100 T 0.03 2

Brass rubbed with 80- grit emery

20 T 0.20 2

Brass sheet, rolled 20 T 0.06 1

Brass sheet, worked with emery

20 T 0.2 1

Brick alumina 17 SW 0.68 5

Brick common 17 SW 0.860.81 5

Brick Dinas silica, glazed, rough

1100 T 0.85 1

Brick Dinas silica, refractory

1000 T 0.66 1

Brick Dinas silica, un- glazed, rough

1000 T 0.80 1

Brick firebrick 17 SW 0.68 5

Brick fireclay 1000 T 0.75 1

Brick fireclay 1200 T 0.59 1

Brick fireclay 20 T 0.85 1

Brick masonry 35 SW 0.94 7

Brick masonry, plastered

20 T 0.94 1

Brick red, common 20 T 0.93 2

Brick red, rough 20 T 0.880.93 1

Brick refractory, corundum

1000 T 0.46 1

Brick refractory, magnesite

10001300 T 0.38 1

Brick refractory, strongly radiating

5001000 T 0.80.9 1

Brick refractory, weakly radiating

5001000 T 0.650.75 1

Brick silica, 95% SiO2 1230 T 0.66 1

Brick sillimanite, 33% SiO2, 64% Al2O3

1500 T 0.29 1

Brick waterproof 17 SW 0.87 5

Bronze phosphor bronze 70 SW 0.08 9

#T559770; r. AI/37003/37003; en-US 183

Emissivity tables24

Table 24.1 T: Total spectrum; SW: 25 m; LW: 814 m, LLW: 6.520 m; 1: Material; 2: Specification; 3: Temperature in C; 4: Spectrum; 5: Emissivity: 6:Reference (continued)

1 2 3 4 5 6

Bronze phosphor bronze 70 LW 0.06 9

Bronze polished 50 T 0.1 1

Bronze porous, rough 50150 T 0.55 1

Bronze powder T 0.760.80 1

Carbon candle soot 20 T 0.95 2

Carbon charcoal powder T 0.96 1

Carbon graphite powder T 0.97 1

Carbon graphite, filed surface

20 T 0.98 2

Carbon lampblack 20400 T 0.950.97 1

Chipboard untreated 20 SW 0.90 6

Chromium polished 50 T 0.10 1

Chromium polished 5001000 T 0.280.38 1

Clay fired 70 T 0.91 1

Cloth black 20 T 0.98 1

Concrete 20 T 0.92 2

Concrete dry 36 SW 0.95 7

Concrete rough 17 SW 0.97 5

Concrete walkway 5 LLW 0.974 8

Copper commercial, burnished

20 T 0.07 1

Copper electrolytic, care- fully polished

80 T 0.018 1

Copper electrolytic, polished

34 T 0.006 4

Copper molten 11001300 T 0.130.15 1

Copper oxidized 50 T 0.60.7 1

Copper oxidized to blackness

T 0.88 1

Copper oxidized, black 27 T 0.78 4

Copper oxidized, heavily 20 T 0.78 2

Copper polished 50100 T 0.02 1

Copper polished 100 T 0.03 2

Copper polished, commercial

27 T 0.03 4

Copper polished, mechanical

22 T 0.015 4

Copper pure, carefully prepared surface

22 T 0.008 4

Copper scraped 27 T 0.07 4

Copper dioxide powder T 0.84 1

Copper oxide red, powder T 0.70 1

#T559770; r. AI/37003/37003; en-US 184

Emissivity tables24

Table 24.1 T: Total spectrum; SW: 25 m; LW: 814 m, LLW: 6.520 m; 1: Material; 2: Specification; 3: Temperature in C; 4: Spectrum; 5: Emissivity: 6:Reference (continued)

1 2 3 4 5 6

Ebonite T 0.89 1

Emery coarse 80 T 0.85 1

Enamel 20 T 0.9 1

Enamel lacquer 20 T 0.850.95 1

Fiber board hard, untreated 20 SW 0.85 6

Fiber board masonite 70 SW 0.75 9

Fiber board masonite 70 LW 0.88 9

Fiber board particle board 70 SW 0.77 9

Fiber board particle board 70 LW 0.89 9

Fiber board porous, untreated 20 SW 0.85 6

Glass pane (float glass)

non-coated 20 LW 0.97 14

Gold polished 130 T 0.018 1

Gold polished, carefully 200600 T 0.020.03 1

Gold polished, highly 100 T 0.02 2

Granite polished 20 LLW 0.849 8

Granite rough 21 LLW 0.879 8

Granite rough, 4 different samples

70 SW 0.950.97 9

Granite rough, 4 different samples

70 LW 0.770.87 9

Gypsum 20 T 0.80.9 1

Ice: See Water

Iron and steel cold rolled 70 SW 0.20 9

Iron and steel cold rolled 70 LW 0.09 9

Iron and steel covered with red rust

20 T 0.610.85 1

Iron and steel electrolytic 100 T 0.05 4

Iron and steel electrolytic 22 T 0.05 4

Iron and steel electrolytic 260 T 0.07 4

Iron and steel electrolytic, care- fully polished

175225 T 0.050.06 1

Iron and steel freshly worked with emery

20 T 0.24 1

Iron and steel ground sheet 9501100 T 0.550.61 1

Iron and steel heavily rusted sheet

20 T 0.69 2

Iron and steel hot rolled 130 T 0.60 1

Iron and steel hot rolled 20 T 0.77 1

Iron and steel oxidized 100 T 0.74 4

Iron and steel oxidized 100 T 0.74 1

Iron and steel oxidized 1227 T 0.89 4

#T559770; r. AI/37003/37003; en-US 185

Emissivity tables24

Table 24.1 T: Total spectrum; SW: 25 m; LW: 814 m, LLW: 6.520 m; 1: Material; 2: Specification; 3: Temperature in C; 4: Spectrum; 5: Emissivity: 6:Reference (continued)

1 2 3 4 5 6

Iron and steel oxidized 125525 T 0.780.82 1

Iron and steel oxidized 200 T 0.79 2

Iron and steel oxidized 200600 T 0.80 1

Iron and steel oxidized strongly 50 T 0.88 1

Iron and steel oxidized strongly 500 T 0.98 1

Iron and steel polished 100 T 0.07 2

Iron and steel polished 4001000 T 0.140.38 1

Iron and steel polished sheet 7501050 T 0.520.56 1

Iron and steel rolled sheet 50 T 0.56 1

Iron and steel rolled, freshly 20 T 0.24 1

Iron and steel rough, plane surface

50 T 0.950.98 1

Iron and steel rusted red, sheet 22 T 0.69 4

Iron and steel rusted, heavily 17 SW 0.96 5

Iron and steel rusty, red 20 T 0.69 1

Iron and steel shiny oxide layer, sheet,

20 T 0.82 1

Iron and steel shiny, etched 150 T 0.16 1

Iron and steel wrought, carefully polished

40250 T 0.28 1

Iron galvanized heavily oxidized 70 SW 0.64 9

Iron galvanized heavily oxidized 70 LW 0.85 9

Iron galvanized sheet 92 T 0.07 4

Iron galvanized sheet, burnished 30 T 0.23 1

Iron galvanized sheet, oxidized 20 T 0.28 1

Iron tinned sheet 24 T 0.064 4

Iron, cast casting 50 T 0.81 1

Iron, cast ingots 1000 T 0.95 1

Iron, cast liquid 1300 T 0.28 1

Iron, cast machined 8001000 T 0.600.70 1

Iron, cast oxidized 100 T 0.64 2

Iron, cast oxidized 260 T 0.66 4

Iron, cast oxidized 38 T 0.63 4

Iron, cast oxidized 538 T 0.76 4

Iron, cast oxidized at 600C 200600 T 0.640.78 1

Iron, cast polished 200 T 0.21 1

Iron, cast polished 38 T 0.21 4

Iron, cast polished 40 T 0.21 2

Iron, cast unworked 9001100 T 0.870.95 1

#T559770; r. AI/37003/37003; en-US 186

Emissivity tables24

Table 24.1 T: Total spectrum; SW: 25 m; LW: 814 m, LLW: 6.520 m; 1: Material; 2: Specification; 3: Temperature in C; 4: Spectrum; 5: Emissivity: 6:Reference (continued)

1 2 3 4 5 6

Krylon Ultra-flat black 1602

Flat black Room tempera- ture up to 175

LW 0.96 12

Krylon Ultra-flat black 1602

Flat black Room tempera- ture up to 175

MW 0.97 12

Lacquer 3 colors sprayed on Aluminum

70 SW 0.500.53 9

Lacquer 3 colors sprayed on Aluminum

70 LW 0.920.94 9

Lacquer Aluminum on rough surface

20 T 0.4 1

Lacquer bakelite 80 T 0.83 1

Lacquer black, dull 40100 T 0.960.98 1

Lacquer black, matte 100 T 0.97 2

Lacquer black, shiny, sprayed on iron

20 T 0.87 1

Lacquer heatresistant 100 T 0.92 1

Lacquer white 100 T 0.92 2

Lacquer white 40100 T 0.80.95 1

Lead oxidized at 200C 200 T 0.63 1

Lead oxidized, gray 20 T 0.28 1

Lead oxidized, gray 22 T 0.28 4

Lead shiny 250 T 0.08 1

Lead unoxidized, polished

100 T 0.05 4

Lead red 100 T 0.93 4

Lead red, powder 100 T 0.93 1

Leather tanned T 0.750.80 1

Lime T 0.30.4 1

Magnesium 22 T 0.07 4

Magnesium 260 T 0.13 4

Magnesium 538 T 0.18 4

Magnesium polished 20 T 0.07 2

Magnesium powder

T 0.86 1

Molybdenum 15002200 T 0.190.26 1

Molybdenum 6001000 T 0.080.13 1

Molybdenum filament 7002500 T 0.10.3 1

Mortar 17 SW 0.87 5

Mortar dry 36 SW 0.94 7

Nextel Velvet 811- 21 Black

Flat black 60150 LW > 0.97 10 and 11

Nichrome rolled 700 T 0.25 1

#T559770; r. AI/37003/37003; en-US 187

Emissivity tables24

Table 24.1 T: Total spectrum; SW: 25 m; LW: 814 m, LLW: 6.520 m; 1: Material; 2: Specification; 3: Temperature in C; 4: Spectrum; 5: Emissivity: 6:Reference (continued)

1 2 3 4 5 6

Nichrome sandblasted 700 T 0.70 1

Nichrome wire, clean 50 T 0.65 1

Nichrome wire, clean 5001000 T 0.710.79 1

Nichrome wire, oxidized 50500 T 0.950.98 1

Nickel bright matte 122 T 0.041 4

Nickel commercially pure, polished

100 T 0.045 1

Nickel commercially pure, polished

200400 T 0.070.09 1

Nickel electrolytic 22 T 0.04 4

Nickel electrolytic 260 T 0.07 4

Nickel electrolytic 38 T 0.06 4

Nickel electrolytic 538 T 0.10 4

Nickel electroplated on iron, polished

22 T 0.045 4

Nickel electroplated on iron, unpolished

20 T 0.110.40 1

Nickel electroplated on iron, unpolished

22 T 0.11 4

Nickel electroplated, polished

20 T 0.05 2

Nickel oxidized 1227 T 0.85 4

Nickel oxidized 200 T 0.37 2

Nickel oxidized 227 T 0.37 4

Nickel oxidized at 600C 200600 T 0.370.48 1

Nickel polished 122 T 0.045 4

Nickel wire 2001000 T 0.10.2 1

Nickel oxide 10001250 T 0.750.86 1

Nickel oxide 500650 T 0.520.59 1

Oil, lubricating 0.025 mm film 20 T 0.27 2

Oil, lubricating 0.050 mm film 20 T 0.46 2

Oil, lubricating 0.125 mm film 20 T 0.72 2

Oil, lubricating film on Ni base: Ni base only

20 T 0.05 2

Oil, lubricating thick coating 20 T 0.82 2

Paint 8 different colors and qualities

70 SW 0.880.96 9

Paint 8 different colors and qualities

70 LW 0.920.94 9

Paint Aluminum, various ages

50100 T 0.270.67 1

Paint cadmium yellow T 0.280.33 1

Paint chrome green T 0.650.70 1

#T559770; r. AI/37003/37003; en-US 188

Emissivity tables24

Table 24.1 T: Total spectrum; SW: 25 m; LW: 814 m, LLW: 6.520 m; 1: Material; 2: Specification; 3: Temperature in C; 4: Spectrum; 5: Emissivity: 6:Reference (continued)

1 2 3 4 5 6

Paint cobalt blue T 0.70.8 1

Paint oil 17 SW 0.87 5

Paint oil based, average of 16 colors

100 T 0.94 2

Paint oil, black flat 20 SW 0.94 6

Paint oil, black gloss 20 SW 0.92 6

Paint oil, gray flat 20 SW 0.97 6

Paint oil, gray gloss 20 SW 0.96 6

Paint oil, various colors 100 T 0.920.96 1

Paint plastic, black 20 SW 0.95 6

Paint plastic, white 20 SW 0.84 6

Paper 4 different colors 70 SW 0.680.74 9

Paper 4 different colors 70 LW 0.920.94 9

Paper black T 0.90 1

Paper black, dull T 0.94 1

Paper black, dull 70 SW 0.86 9

Paper black, dull 70 LW 0.89 9

Paper blue, dark T 0.84 1

Paper coated with black lacquer

T 0.93 1

Paper green T 0.85 1

Paper red T 0.76 1

Paper white 20 T 0.70.9 1

Paper white bond 20 T 0.93 2

Paper white, 3 different glosses

70 SW 0.760.78 9

Paper white, 3 different glosses

70 LW 0.880.90 9

Paper yellow T 0.72 1

Plaster 17 SW 0.86 5

Plaster plasterboard, untreated

20 SW 0.90 6

Plaster rough coat 20 T 0.91 2

Plastic glass fibre lami- nate (printed circ. board)

70 SW 0.94 9

Plastic glass fibre lami- nate (printed circ. board)

70 LW 0.91 9

Plastic polyurethane iso- lation board

70 LW 0.55 9

Plastic polyurethane iso- lation board

70 SW 0.29 9

#T559770; r. AI/37003/37003; en-US 189

Emissivity tables24

Table 24.1 T: Total spectrum; SW: 25 m; LW: 814 m, LLW: 6.520 m; 1: Material; 2: Specification; 3: Temperature in C; 4: Spectrum; 5: Emissivity: 6:Reference (continued)

1 2 3 4 5 6

Plastic PVC, plastic floor, dull, structured

70 SW 0.94 9

Plastic PVC, plastic floor, dull, structured

70 LW 0.93 9

Platinum 100 T 0.05 4

Platinum 10001500 T 0.140.18 1

Platinum 1094 T 0.18 4

Platinum 17 T 0.016 4

Platinum 22 T 0.03 4

Platinum 260 T 0.06 4

Platinum 538 T 0.10 4

Platinum pure, polished 200600 T 0.050.10 1

Platinum ribbon 9001100 T 0.120.17 1

Platinum wire 1400 T 0.18 1

Platinum wire 5001000 T 0.100.16 1

Platinum wire 50200 T 0.060.07 1

Porcelain glazed 20 T 0.92 1

Porcelain white, shiny T 0.700.75 1

Rubber hard 20 T 0.95 1

Rubber soft, gray, rough 20 T 0.95 1

Sand T 0.60 1

Sand 20 T 0.90 2

Sandstone polished 19 LLW 0.909 8

Sandstone rough 19 LLW 0.935 8

Silver polished 100 T 0.03 2

Silver pure, polished 200600 T 0.020.03 1

Skin human 32 T 0.98 2

Slag boiler 0100 T 0.970.93 1

Slag boiler 14001800 T 0.690.67 1

Slag boiler 200500 T 0.890.78 1

Slag boiler 6001200 T 0.760.70 1

Snow: See Water

Soil dry 20 T 0.92 2

Soil saturated with water

20 T 0.95 2

Stainless steel alloy, 8% Ni, 18% Cr

500 T 0.35 1

Stainless steel rolled 700 T 0.45 1

Stainless steel sandblasted 700 T 0.70 1

Stainless steel sheet, polished 70 SW 0.18 9

Stainless steel sheet, polished 70 LW 0.14 9

#T559770; r. AI/37003/37003; en-US 190

Emissivity tables24

Table 24.1 T: Total spectrum; SW: 25 m; LW: 814 m, LLW: 6.520 m; 1: Material; 2: Specification; 3: Temperature in C; 4: Spectrum; 5: Emissivity: 6:Reference (continued)

1 2 3 4 5 6

Stainless steel sheet, untreated, somewhat scratched

70 SW 0.30 9

Stainless steel sheet, untreated, somewhat scratched

70 LW 0.28 9

Stainless steel type 18-8, buffed 20 T 0.16 2

Stainless steel type 18-8, oxi- dized at 800C

60 T 0.85 2

Stucco rough, lime 1090 T 0.91 1

Styrofoam insulation 37 SW 0.60 7

Tar T 0.790.84 1

Tar paper 20 T 0.910.93 1

Tile glazed 17 SW 0.94 5

Tin burnished 2050 T 0.040.06 1

Tin tinplated sheet iron

100 T 0.07 2

Titanium oxidized at 540C 1000 T 0.60 1

Titanium oxidized at 540C 200 T 0.40 1

Titanium oxidized at 540C 500 T 0.50 1

Titanium polished 1000 T 0.36 1

Titanium polished 200 T 0.15 1

Titanium polished 500 T 0.20 1

Tungsten 15002200 T 0.240.31 1

Tungsten 200 T 0.05 1

Tungsten 6001000 T 0.10.16 1

Tungsten filament 3300 T 0.39 1

Varnish flat 20 SW 0.93 6

Varnish on oak parquet floor

70 SW 0.90 9

Varnish on oak parquet floor

70 LW 0.900.93 9

Wallpaper slight pattern, light gray

20 SW 0.85 6

Wallpaper slight pattern, red 20 SW 0.90 6

Water distilled 20 T 0.96 2

Water frost crystals 10 T 0.98 2

Water ice, covered with heavy frost

0 T 0.98 1

Water ice, smooth 0 T 0.97 1

Water ice, smooth 10 T 0.96 2

Water layer >0.1 mm thick

0100 T 0.950.98 1

Water snow T 0.8 1

#T559770; r. AI/37003/37003; en-US 191

Emissivity tables24

Table 24.1 T: Total spectrum; SW: 25 m; LW: 814 m, LLW: 6.520 m; 1: Material; 2: Specification; 3: Temperature in C; 4: Spectrum; 5: Emissivity: 6:Reference (continued)

1 2 3 4 5 6

Water snow 10 T 0.85 2

Wood 17 SW 0.98 5

Wood 19 LLW 0.962 8

Wood ground T 0.50.7 1

Wood pine, 4 different samples

70 SW 0.670.75 9

Wood pine, 4 different samples

70 LW 0.810.89 9

Wood planed 20 T 0.80.9 1

Wood planed oak 20 T 0.90 2

Wood planed oak 70 SW 0.77 9

Wood planed oak 70 LW 0.88 9

Wood plywood, smooth, dry

36 SW 0.82 7

Wood plywood, untreated

20 SW 0.83 6

Wood white, damp 20 T 0.70.8 1

Zinc oxidized at 400C 400 T 0.11 1

Zinc oxidized surface 10001200 T 0.500.60 1

Zinc polished 200300 T 0.040.05 1

Zinc sheet 50 T 0.20 1

#T559770; r. AI/37003/37003; en-US 192

A note on the technical production of this publication This publication was produced using XML the eXtensible Markup Language. For more information about XML, please visit http://www.w3.org/XML/ A note on the typeface used in this publication This publication was typeset using Linotype HelveticaWorld. Helvetica was designed by Max Miedinger (19101980) LOEF (List Of Effective Files) T501003.xml; en-US; AI; 37003; 2016-08-24 T505475.xml; en-US; 15550; 2014-06-30 T505779.xml; en-US; 15550; 2014-06-30 T505783.xml; en-US; 23216; 2015-02-19 T505013.xml; en-US; 35155; 2016-04-21 T505085.xml; en-US; 33290; 2016-02-11 T505931.xml; ; 33495; 2016-02-18 T505084.xml; en-US; 35730; 2016-05-19 T505478.xml; en-US; 33298; 2016-02-11 T505507.xml; en-US; 36944; 2016-08-19 T505082.xml; en-US; 33290; 2016-02-11 T505477.xml; en-US; 33290; 2016-02-11 T505081.xml; en-US; 33298; 2016-02-11 T505470.xml; en-US; 12154; 2014-03-06 T505007.xml; en-US; 35155; 2016-04-21 T505004.xml; en-US; 35155; 2016-04-21 T505000.xml; en-US; 35155; 2016-04-21 T505005.xml; en-US; 35155; 2016-04-21 T505001.xml; en-US; 32554; 2016-01-20 T505006.xml; en-US; 32555; 2016-01-20 T505002.xml; en-US; 33518; 2016-02-18

#T559770; r. AI/37003/37003; en-US 194

last page

Publ. No.: T559770 Release: AI Commit: 37003 Head: 37003 Language: en-US Modified: 2016-08-24 Formatted: 2016-08-24

Website http://www.flir.com Customer support http://support.flir.com Copyright 2016, FLIR Systems, Inc. All ri

Manualsnet FAQs

If you want to find out how the A35 Series Flir works, you can view and download the Flir A35 Series Camera User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Flir A35 Series as well as other Flir manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Flir A35 Series. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Flir A35 Series Camera User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Flir A35 Series Camera User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Flir A35 Series Camera User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Flir A35 Series Camera User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Flir A35 Series Camera User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.