Fisher Price Mattel 3-in-1 Sit Stride Ride Lion DHW02 Toy Instruction Manual PDF

1 of 8
1 of 8

Summary of Content for Fisher Price Mattel 3-in-1 Sit Stride Ride Lion DHW02 Toy Instruction Manual PDF

DHW02

Keep this instruction sheet for future reference, as it contains important information.

Requires three AA batteries (included). Batteries included are for demonstration purposes only.

Adult assembly is required. Tool required: Phillips screwdriver (not included).

fisher-price.com

Not to be used by children over 36 months (due to seat height).

WARNING!

2

2016 Mattel. All Rights Reserved. DHW02-0970

PRINTED IN MEXICO 1100776815-DOM

CONSUMER ASSISTANCE 1-800-432-5437 (US & Canada) 1300 135 312 (Australia)

Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers: 1-800-382-7470.

Outside the United States:

Canada: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; www.service.mattel.com.

Great Britain: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303. www.service.mattel.com/uk

Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.

Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.

New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.

FCC STATEMENT (UNITED STATES ONLY) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the

equipment and receiver. Consult the dealer or an experienced radio/TV

technician for help. NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Care Wipe with a clean cloth dampened with a mild

soap and water solution. Do not immerse. Periodically inspect this product for wear

or damage. Check all nuts and bolts, and tighten as needed. Replace worn or broken parts immediately.

Consumer Information

3

Frame 2 Front Axles

Seat

Assembled Parts

2 Front Wheels (Smaller)

2 Hubs

2 Rear Wheels (Larger)

M4,5 x 1,9 cm Screw - 11

Shown Actual Size

Note: Tighten and loosen all screws with a Phillips screwdriver.

Do not over-tighten screws.

Head

This package contains small parts. For adult assembly only.

CAUTION

4

Front Axle Front Wheel

(Smaller)

Assembly

4

2

1 Slide a front wheel onto a front axle.

Turn the frame over and fit the front axle assembly onto the front of the frame.

Insert three screws and tighten. Repeat steps 1 and 2 to assemble the

remaining front wheel and front axle.

Turn the frame upright. At an angle, fit the peg on one side of the seat

into the slot in the frame. Push to "snap" the other peg in place.

Rear Wheel (Larger)

Hub

3 Fit a rear wheel onto the rear axle. Fit a hub into the center of the rear wheel. Insert a screw into the center of the hub

and tighten. Repeat this procedure to attach the other

rear wheel and hub.

Frame

Seat

BOTTOM VIEW

TOP FRONT VIEW

5

Assembly

5 7

6

Push the back of the seat to "snap" in place.

Fit the head onto the frame.

While holding the head in place, turn the frame over.

Insert three screws into the holes in the frame and tighten.

BACK VIEW

BOTTOM VIEW

FRONT VIEW

6

1,5V x 3 AA (LR6)

Battery Replacement

Locate the battery compartment on the back of the lion.

Loosen the screw in the battery compartment door with a Phillips screwdriver and remove the door.

Remove the exhausted batteries and dispose properly.

Insert three AA (LR6) alkaline batteries. Replace the battery compartment door and

tighten the screw. Do not over-tighten. If this product begins to operate erratically, you

may need to reset the electronics. Slide the power/volume switch off and then back on.

When sounds/lights become faint or stop, its time for an adult to change the batteries.

Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid battery leakage: Do not mix old and new batteries or batteries

of different types: alkaline, standard (carbon- zinc) or rechargeable (nickel-cadmium).

Insert batteries as indicated inside the battery compartment.

Remove batteries during long periods of non-use. Always remove exhausted batteries from the toy. Dispose of batteries safely. Do not dispose of the product in a fire. The batteries inside may explode or leak.

Never short-circuit the battery terminals. Use only batteries of the same or equivalent

type, as recommended. Do not charge non-rechargeable batteries. Remove rechargeable batteries from the toy

before charging. If removable, rechargeable batteries are

used, they are only to be charged under adult supervision.

For longer life, use alkaline batteries.

Protect the environment by not disposing of this product with household waste (2012/19/EU). Check your local authority for recycling advice and facilities.

CAN ICES-3 (B)/NMB-3 (B) Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Lutilisation de ce dispositif est autorise seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) il doit pouvoir tolrer tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre son fonctionnement.

7

Press lion's nose for fun lights with phrases or music!

Ready, set, GO!

Slide the power/volume switch: ON with low volume ON with high volume OFF

Adult supervision is required. Never use near steps. Choose areas for riding that are free

of obstacles. Learn to stop safely. Use with caution as this product requires

skill to operate safely to avoid falls, collisions, and injuries to yourself (the rider) and others.

Open the lion's mouth to drop a ball in and hear more fun phrases or music!

Press a button on the lion's mane to hear its number. Press the same button again to hear its color. Press the button a third time to hear its number, then count the tones you hear!

Hear phrases, music or sound effects when you push the lion.

8

Rider to Walker

Pull out the latch on the back of the seat and lift the seat 1 .

Lift the support 2 . Push down on the handle to "snap" it to the

support 3 . Lift the handle to be sure it's secure to the support,

Only an adult should convert this product.

1

2

3

Walker to Rider Only an adult should convert this product.

Pull out the latch on the back of the

Manualsnet FAQs

If you want to find out how the Mattel Fisher Price works, you can view and download the Fisher Price Mattel 3-in-1 Sit Stride Ride Lion DHW02 Toy Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Fisher Price Mattel as well as other Fisher Price manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Fisher Price Mattel. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Fisher Price Mattel 3-in-1 Sit Stride Ride Lion DHW02 Toy Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Fisher Price Mattel 3-in-1 Sit Stride Ride Lion DHW02 Toy Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Fisher Price Mattel 3-in-1 Sit Stride Ride Lion DHW02 Toy Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Fisher Price Mattel 3-in-1 Sit Stride Ride Lion DHW02 Toy Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Fisher Price Mattel 3-in-1 Sit Stride Ride Lion DHW02 Toy Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.