Fisher Price Mattel Stay-in-View Infant Car 79052 Seat Instruction Manual PDF

Pages 64
Year 2000
Language(s)
English en
1 of 64
1 of 64

Summary of Content for Fisher Price Mattel Stay-in-View Infant Car 79052 Seat Instruction Manual PDF

Page 3

Thank you for choosing the Fisher-Price

Stay-in-View Infant Car Seat... Before you use your car seat, please take time to read and understand this manual completely... It includes important step-by-step instructions on how to assemble, setup and install your car seat prop- erly and how to secure your child... DO NOT allow others to use this car seat until they understand these instructions on proper use... Your childs safety depends on you! No one can predict when the use of a car seat will prevent injury or death... When this car seat is used properly, it will reduce the risk of injury in a sudden stop or crash...

Message to Parents

Stay-in-View Infant Car Seat1

Page 4

Table of Contents

WARNING ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4

IMPORTANT! ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7

Aircraft Use ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9

Register Your Car Seat ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9

All About Your Car Seat ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10

Selecting a Vehicle Seating Location For Your Car Seat ... ... ... ... ... ... ... ... ... ... ... ... 12

What Kind of Vehicle Belt System Do You Have? ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 14

NEVER USE These Vehicle Belt Systems ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16

OK to USE These Vehicle Belt Systems ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 17

Stay-in-View Infant Car Seat2

Page 5

Table of Contents

Assembly and Setup ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 18

Securing Your Child ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 28

Removing Your Child From the Car Seat ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34

Car Seat Installation with Base ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 35

Car Seat Installation without Base ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 48

Carry Handle ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 58

Carry Strap ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 59

Cleaning and Washing ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 61

Stay-in-View Infant Car Seat3

Page 6

WARNING

Proper installation and use depends on you! If you do not follow the instructions in this manual and the labels on the car seat, paying particular attention to the warn- ing statements, your child could be at risk of striking the vehicles interior during a sudden stop or crash, resulting in serious injury or death...

ALWAYS secure this car seat with your vehicle belt system exactly as described in this manual... Refer also to your vehicle owners manual for specific information on your vehicle belt system and specific instructions on how to install a car seat in your vehicle...

Stay-in-View Infant Car Seat4

Page 7

NEVER install this rear-facing car seat in a vehicle seating location equipped with an airbag... The airbag impact can cause severe head injury or death... If your vehicle is equipped with a passenger airbag, please refer to your vehicle owners manual for child restraint installation instructions... NEVER install and secure your child (Birth - 9 kg, 20 lbs) in this car seat facing the front of the vehicle... You must install the car seat in the rear-facing position to avoid serious neck injuries in a sudden stop or crash... NEVER allow the harness shoulder straps to be loose around your child... If the harness shoulder straps are not snug against your child, your child will not be properly restrained...

WARNING

Stay-in-View Infant Car Seat5

Page 8

NEVER dress your child in clothing that interferes with fasten- ing the harness latch plate into the latch located between your childs legs... If you do not properly fasten and adjust the harness, your child could eject from the car seat in a crash... NEVER leave an unsecured car seat or base in your vehicle... If left unsecured, even when not occupied, the car seat or base could injure other occupants in a sudden stop or crash... NEVER use the car seat or the base after either is involved in a crash... A crash can cause damage to the car seat or the base that you cannot see...

WARNING

Stay-in-View Infant Car Seat6

Page 9

IMPORTANT!

Please read this entire manual carefully before using this car seat... Keep this manual under the car seat, using the clips provided...

This child restraint system conforms to all applicable Canadian Motor Vehicle Safety Standards (section 213... 1) and is certified for use in motor vehicles and aircraft...

This car seat is intended for use by children birth to 9 kg (20 lbs) and up to 74 cm (29") in height...

The American Academy of Pediatrics recommends that infants be secured in a rear-facing car seat until they are at least one year of age and 9 kg (20 lbs) to reduce the risk of cervical spine injury in the event of a crash... Since an infants head size is very large relative to body size and the neck is still developing strength, a rear-facing car seat is safer because it better supports an infants head and back in the event of a frontal crash...

This car seat is NOT designed to be attached to a shopping cart... It does not include an attachment mechanism...

Complete the registration card attached to the car seat and mail it in today!

Stay-in-View Infant Car Seat7

Page 10

IMPORTANT!

This car seat includes a locking clip (stored on this car seat) for use with a par- ticular vehicle belt system... Always attach the locking clip to a vehicle lap and shoulder belt system with a sliding latch plate... Please refer to pages 14 -17 to help identify this type of vehicle belt system and instructions beginning on page 35 (installation with base) or 48 (installation without base) for locking clip use...

Store the locking clip under the car seat, using the clip provided, for future use... Fisher-Price recommends that child restraints be replaced after eight years

to provide the best assurance that the child restraint is: in reliable working condition; well-suited for use in constantly changing automobile interior designs; and reasonably current in relation to Canadian regulations... When you replace your car seat for any reason, make sure that another child can no longer use it by disposing of it properly...

If you have any questions about proper use of your car seat or would like to order replacement parts, please call 1-800-567-7724... Or write to:

Mattel Canada Inc... 6155 Freemont Blvd... Mississauga, Ontario L5R 3W2

Stay-in-View Infant Car Seat8

Page 11

Aircraft Use

You can install this car seat in aircraft seats that face forward... Before bringing the car seat on board, notify the airline of your intent to do so... The airline may have restrictions regarding its use... To install the car seat in an aircraft seat, follow the instructions of the flight attendant regarding placement of the car seat... Be sure the car seat faces the rear of the aircraft... For specific instructions, please see pages 35-47 for installation with the base; 48-57 for installation without the base...

Stay-in-View Infant Car Seat9

Register Your Stay-in-View Car Seat

Child restraints could be recalled for safety reasons... You must register this restraint to be reached in a recall... Send your name, address, and the restraints model number and manufacturing

date (located on the side of the seat) to: Mattel Canada Inc... , 6155 Freemont Blvd... , Mississauga, Ontario L5R 3W2... For recall information, call 1-800-567-7724...

NO POSTAGE

NECESSARY

POSTAGE WILL BE PAID BY ADDRESSEE BUSINESS REPLY MAIL

FIRST CLASS MAIL PERMIT NO... 106 WEBSTER, NY

Page 12

All About Your Car Seat

The safety features of this Fisher-Price car seat will reduce the risk of injury to your child in a crash; however, no car seat can prevent serious injury or death in all accidents...

CARRY HANDLE

BASE WITH BUILT-IN MIRROR

A SAFER RIDE FOR BABY

CORRECT POSITION INDICATOR

THREE-POINT HARNESS

Stay-in-View Infant Car Seat10

Page 13

All About Your Car Seat

Carry Handle Convenient handle makes it easy to carry baby and converts to a shoulder strap...

Base with Built-in Mirror Helps you keep your rear-facing infant in full view at all times...

Three-Point Harness This restraint system makes it easier to get baby in and out, while safely securing your child in the car seat...

Correct Position Indicator Check this line to see if youve installed the car seat at the proper angle...

A Safer Ride For Baby Contoured base allows for a snug and secure fit in virtually all vehicles... Car seat snaps easily and securely into base...

Stay-in-View Infant Car Seat11

Page 14

Selecting a Vehicle Seating Location for Your Car Seat

WARNING NEVER install this rear-facing car seat in a vehicle seating location equipped with an airbag... The airbag impact can cause severe head injury or death... If your vehicle is equipped with apassenger airbag, please refer to your vehicle owners manual for child restraint installation instructions...

Accident statistics show that children are safer when properly secured in rear vehicle seating locations than in front seating locations...

IMPORTANT!

Stay-in-View Infant Car Seat12

Page 15

Selecting a Vehicle Seating Location for Your Car Seat

The rear seating locations are ALWAYS preferred...

ALWAYS use vehicle seats that face the front of the vehicle...

Front of Vehicle

NEVER use vehicle seats that face the side of the vehicle...

NEVER use vehicle seats that face the rear of the vehicle...

Front of Vehicle

Front of Vehicle

Stay-in-View Infant Car Seat13

Page 16

What Kind of Vehicle Belt System Do You Have?

WARNING ALWAYS secure this car seat with your vehicle belt system exactly as described in this manual... Refer also to your vehicle owners manual for specific information on your vehicle belt system and specific instructions on how to install a car seat in your vehicle...

Stay-in-View Infant Car Seat14

Page 17

What Kind of Vehicle Belt System Do You Have?

There are many different types of vehicle belt systems... Some vehicle belt systems can never be used to install this car seat... Check your vehicle to determine which type of vehicle belt system or systems it has... Many vehicles have more than one type of vehicle belt system... For example, you may find lap-only belts in center seating locations and lap and shoulder belts in side seating locations... If you are not sure which type of vehicle belt system you have, contact your vehicle dealer or manufacturer... The illustrations on pages 16 and 17 show vehicle belt systems that can never be used to install the car seat and vehicle belt systems that are acceptable for use... If you do not have a seating location with a usable vehicle belt system, DO NOT use the car seat... Contact your vehicle manufacturer... The vehicle manufacturer may be able to install a vehicle belt system that will enable you to install the car seat properly... NEVER alter your vehicle belt system yourself...

Stay-in-View Infant Car Seat15

Page 18

Explanation This lap and shoulder belt system is attached to the vehicles door and moves when the door is opened... You will not be able to keep the car seat secure...

NEVER USE

NEVER USE These Vehicle Belt Systems

Door Mounted Lap and Shoulder Belt

Explanation Usually, the lap belts with these systems cannot be tightened for a firm fit... Also, the shoulder belt moves along a track and may become entangled with the car seat when the door is opened...

Motorized Shoulder BeltNEVER USE

Stay-in-View Infant Car Seat16

Page 19

OK to USE These Vehicle Belt Systems

OK

Manual Lap Belt Explanation Pulling the free end tightens the lap belt...

Automatic Locking Retractor Lap Belt Explanation The lap belt slack retracts automati- cally and locks... It can be further tightened by push- ing the belt in near the retractor...

OK OK OK

Lap and Shoulder Belt with Sliding Latch Plate Explanation Pull the shoulder por- tion of the belt to tighten... The shoulder belt retracts automati- cally... Use the en- closed locking clip with this type of lap and shoulder belt...

Lap and Shoulder Belt with Locking Latch Plate Explanation Pull the shoulder portion of the belt to tighten...

Stay-in-View Infant Car Seat17

Page 20

Push the release button to remove the harness latch plate from the latch...

1

1

Assembly and Setup

Stay-in-View Infant Car Seat18

Page 21

Assembly and Setup

Place the pad onto the shell...

Carefully place your child in the car seat to select the appropriate harness shoulder strap slots... - If your childs shoulders are even with or below the lower strap slots, you will position the harness shoulder straps in the lower strap slots in the car seat...

- If your childs shoulders are above the lower strap slots, you will insert the harness shoulder straps through the upper strap slots in the car seat...

2

3

3

Stay-in-View Infant Car Seat19

Lower Strap Slots Upper Strap Slots

3

2 2

Page 22

Assembly and Setup

Remove your child from the seat... After selecting the strap slots, open the desired fastener (upper or lower) in the pad...

Fit the harness through the opening in the pad...

4

5 5

Stay-in-View Infant Car Seat20

4

4

To change the harness shoulder strap slots, simply open either pad fastener... You do not need to remove the pad to change the harness shoulder strap slots!

HINT

Lower Pad Fastener

Upper Pad Fastener

Page 23

Assembly and Setup

Position the harness shoulder straps in the desired strap slots (lower or upper) in both the shell and pad... Make sure the harness shoulder straps are not twisted...

6

Stay-in-View Infant Car Seat21

Note: For clarity, these illustrations show the shell without the pad...

Lower Strap Slots Upper Strap Slots

6

6

Page 24

Assembly and Setup

Fasten the pad fastener... Fasten the harness latch plate to the latch...

7

Stay-in-View Infant Car Seat22

DO NOT remove the harness shoulder straps from the adjuster to change the them to different slots... To change the harness shoulder straps to a different height, please refer to pages19-22, steps 2-7...

IMPORTANT!

Lower Pad Fastener Upper Pad Fastener

7

7

Page 25

Assembly and Setup

Lift the bottom of the pad... Insert the pad elastic loops through the holes in the shell... While holding the elastic loops in place, position the shell face down on a flat surface... Attach the pad elastic loops to the pegs on the shell...

8

9

8

9

Stay-in-View Infant Car Seat23

FRONT VIEW

BOTTOM VIEW

Page 26

Assembly and Setup

Position the shell upright on a flat surface... Fit the bottom edges of the pad around the bottom edge of the shell... Wrap the pad elastic loops around the bottom edge of the shell... Position the shell face down on a flat surface... Attach the pad elastic loops to the pegs on the shell...

10

11

Stay-in-View Infant Car Seat24

10

11

BOTTOM VIEW

Page 27

Position the shell upright on a flat surface... Fit the top edges of the pad around the top edge of the shell... Wrap the pad elastic loops around the top edge of the shell... Turn the shell around so that the back is facing you... Attach the pad elastic loops to the pegs on the shell...

Assembly and Setup

12

13

Stay-in-View Infant Car Seat25

12

13

BACK VIEW

Page 28

Assembly and Setup

Insert both canopy stays into the sleeves in the inside of the canopy... Place the canopy under the fabric handle... Insert the ends of the exposed canopy stay into the canopy retainers on each side of the shell... Turn the shell around so that the back is facing you... Attach the canopy elastic loops to the pegs on the shell...

14

15

16

Stay-in-View Infant Car Seat26

16

14

15

Page 29

Assembly and Setup

Peel and remove the protective film from the mirror on the base... Discard the protective film properly...

17

Stay-in-View Infant Car Seat27

17

Page 30

Securing Your Child

Press the release button to remove the harness latch plate from the latch... Lower the chest clip on the harness shoulder straps... Place your child in the car seat... Make sure your childs lower back is against the car seat... This will allow you to snugly position the three-point harness around your child properly... Position the harness shoulder straps over your childs shoulders... Make sure the harness shoulder straps are not twisted... Insert the harness latch plate into the latch... Make sure you hear a click...

1

2

4 2

3

Stay-in-View Infant Car Seat28

3

4

1

Page 31

WARNING

NEVER dress your child in clothing that interferes with fasten- ing the harness latch plate into the latch located between your childs legs... If you do not fasten and adjust the harness, your child could eject from the car seat in a crash...

Stay-in-View Infant Car Seat29

Securing Your Child

Page 32

Securing Your Child

To tighten the harness shoulder straps every time you place your child in the car seat: Pull the right (as you look at the car seat) harness shoul- der strap down to remove slack ... Then, pull the free end of the harness shoulder strap up to tighten ... To loosen the harness shoulder straps: Press the adjuster and pull the right harness shoul- der strap (as you look at the car seat) up ... Balance the harness by pulling the other harness shoulder strap down ...

5

5

C

B

A

A

B

A

B

A

B

Stay-in-View Infant Car Seat30

C

TO TIGHTEN

TO LOOSEN

Page 33

Securing Your Child

Slide the chest clip up so that it is level with your childs underarm area...

6

Stay-in-View Infant Car Seat31

6

Page 34

Securing Your Child

Check to be sure the harness is latched and securing your child prop- erly... Pull the harness shoulder straps up and away from your child firmly... The harness shoulder straps should remain latched and should not pull more than 2,5 cm (1" two fingers) away from your childs chest... If the harness shoulder straps are loose or unlatch, please re-read pages 28 -32, and repeat steps 1- 7...

7

Stay-in-View Infant Car Seat32

7

Page 35

Securing Your Child

WARNING NEVER allow the harness shoulder straps to be loose around your child... If the harness shoulder straps are not snug against your child, your child will not be properly restrained...

Stay-in-View Infant Car Seat33

Page 36

Removing Your Child

1

1

2

Stay-in-View Infant Car Seat34

To remove your child from the car seat: Lower the chest clip...

Press the release button and remove the harness latch plate from the latch... Lift the harness shoulder straps over your childs head... Remove your child from the car seat... Note: Insert the harness latch plate into the latch...

2

Page 37

Car Seat Installation with Base

WARNING ALWAYS secure this car seat with your vehicle belt system exactly as described in this manual... Refer also to your vehicle owners manual for specific information on your vehicle belt system and specific instructions on how to install a car seat in your vehicle... NEVER install this rear-facing car seat in a vehicle seating location equipped with an airbag... The airbag impact can cause severe head injury or death... If your vehicle is equipped with a passenger airbag, please refer to your vehicle owners manual for child restraint installation instructions... NEVER install and secure your child in this car seat facing the front of the vehicle... You must install the car seat in the rear-facing position to avoid serious neck injuries in a sudden stop or crash...

Stay-in-View Infant Car Seat35

Page 38

Car Seat Installation with Base

Once you have selected an acceptable seating location, place the base on the vehicle seat so that the mirror faces the front of the vehicle... Route the vehicle belt across the indents in the base... Buckle the vehicle belt...

1

2

3

Stay-in-View Infant Car Seat36

1

2

3

Front of Vehicle

Page 39

Car Seat Installation with Base

For a manual lap belt system: With the vehicle belt buckled, push down on the base with your knee and pull the free end of the vehicle belt for the tightest possible fit...

4A

4A

Stay-in-View Infant Car Seat37

Page 40

Car Seat Installation with Base

For a lap and shoulder belt system: With the vehicle belt buckled, push down on the base with your knee and pull the shoulder belt for the tightest possible fit...

4B

Some vehicle belt systems have labels with instructions for use with car seats... Read the instructions on your vehicles belt or refer to your vehicle owners manual for specific instructions on how to tighten and lock your vehicle belt system...

HINT

Stay-in-View Infant Car Seat38

4B

Page 41

Check to see if the lap portion of the vehicle lap and shoulder belt system loosens... Move the base from side to side... If you can loosen the lap portion of the vehicle lap and shoulder belt system, the lap portion probably does not have a locking mode and you will need a lock- ing clip (included with your car seat)... If the lap portion of the vehicle lap and shoulder belt system does not loosen, please proceed to step11, page 43...

5

Car Seat Installation with Base

Stay-in-View Infant Car Seat39

NO LOCKING CLIP NEEDED

LOCKING CLIP NEEDED

55

Page 42

To install the locking clip: Re-tighten the vehicle lap and shoulder belt system (see page 38)... Hold the lap and shoulder belts together just behind the tongue and unbuckle the vehicle belt... Continue to hold the lap and shoulder belts together...

6

Car Seat Installation with Base

Stay-in-View Infant Car Seat40

6

Page 43

1... 3

cm (1

/2 ")

Car Seat Installation with Base

While holding the belts together, tuck the edges of the vehicle belts under the arms of the locking clip... Make sure the locking clip is positioned approximately 1... 3 cm (1/2") from the sliding tongue (but no more than 7... 6 cm (3")... While pushing down on the base with your knee, buckle the vehicle belt system... Note: Make sure the locking clip does not rest on the top edge of the base... Tuck the shoulder portion of the vehicle lap and shoulder belt behind the base...

7

8

Arms Stay-in-View Infant Car Seat41

7

8

9

9

Page 44

Car Seat Installation with Base

Test your installation of the base again, by moving the base from side to side... You should NOT be able to move the base easily and loosen the vehicle belt system... Note: Regularly check to be sure your base installation is secure...

Stay-in-View Infant Car Seat42

If, after following these installation instructions, you cannot firmly install the base, choose a different rear vehicle seating location to install the base...

IMPORTANT!

10

CORRECT

INCORRECT

10 10

Page 45

Firmly hold the car seat so that it faces the rear of the vehicle... At an angle, fit the foot of the car seat into the opening below the mirror on the base... Push the car seat down until you hear a click...

Car Seat Installation with Base

12

11

Stay-in-View Infant Car Seat43

13

12

Rear of Vehicle

11

12

13

Page 46

Pull up at the head and foot of the car seat to be sure it is secure in the base...

Car Seat Installation with Base

14

14

Stay-in-View Infant Car Seat44

PULL UPPULL UP PULL UPPULL UP

Page 47

Car Seat Installation with Base

Check to be sure the car seat correct position indicator is parallel with the floor of your vehicle... If the car seat is too inclined, your child will be too upright, allowing your childs head to droop forward...

15

15

Stay-in-View Infant Car Seat45

CORRECT

15

INCORRECT

Page 48

Car Seat Installation with Base

If the correct position indicator is not parallel with the floor of your vehicle, try inserting a rolled bath towel between the vehicle seat and the bottom, back side of the base... This will raise the back of the base and car seat so that the correct position indicator is parallel with the floor of your vehicle...

16

Stay-in-View Infant Car Seat46

16

Page 49

To remove the car seat: Simply pull the car seat release up and lift to remove the car seat from the base...

Car Seat Installation with Base

17

Stay-in-View Infant Car Seat47

17

Page 50

Car Seat Installation without Base

ALWAYS secure this car seat with your vehicle belt system exactly as described in this manual... Refer also to your vehicle owners manual for specific information on your vehicle belt system and specific instructions on how to install a car seat in your vehicle... NEVER install this rear-facing car seat in a vehicle seating location equipped with an airbag... The airbag impact can cause severe head injury or death... If your vehicle is equipped witha passenger airbag, please refer to your vehicle owners manual for child restraint installation instructions... NEVER install and secure your child in this car seat facing the front of the vehicle... You must install the car seat in the rear-facing position to avoid serious neck injuries in a sudden stop or crash...

WARNING

Stay-in-View Infant Car Seat48

Page 51

Once you have selected an acceptable seating location, place the car seat so that it is facing the rear of the vehicle... Fit the vehicle belt through the belt path slots in the top sides of the car seat...

2

1

2

Car Seat Installation without Base

Stay-in-View Infant Car Seat49

1

Rear of Vehicle

Page 52

Car Seat Installation without Base

Buckle the vehicle belt... 3

3

Stay-in-View Infant Car Seat50

Page 53

Car Seat Installation without Base

For a manual lap belt system: With the vehicle belt buckled, pull the free end of the vehicle belt just until the back of the car seat begins to rise...

4A

4A

Stay-in-View Infant Car Seat51

Page 54

Car Seat Installation without Base

For a lap and shoulder belt system: With the vehicle belt buckled, pull the vehicle shoulder belt just until the back of the car seat begins to rise...

4B

4B Some vehicle belt systems have labels

with instructions for use with car seats... Read the instructions on your vehicles belt or refer to your vehicle owners manual for specific instructions on how to tighten and lock your vehicle belt system...

HINT

Stay-in-View Infant Car Seat52

Page 55

Futura 20/60 Car Seat45

Car Seat Installation without Base

After tightening the vehicle belt system, make sure the car seat correct position indicator is parallel with the floor of your vehicle... If the car seat is too inclined, your child will be too upright, allowing your childs head to droop forward...

5

Stay-in-View Infant Car Seat53

CORRECT

5

5

INCORRECT

Page 56

Car Seat Installation without Base

Check to see if the lap portion of the vehicle lap and shoulder belt system loosens... Lightly push down on the head of the car seat... If you can loosen the lap portion of the vehicle lap and shoulder belt system, the lap portion probably does not have a locking mode and you will need a locking clip (included with your car seat)... If the lap portion of the vehicle lap and shoulder belt system does not loosen, you have completed car seat installation...

6 6

NO LOCKING CLIP NEEDED

LOCKING CLIP NEEDED

Stay-in-View Infant Car Seat54

6

Page 57

Car Seat Installation without Base

To install the locking clip: Re-tighten the vehicle lap and shoulder belt system (see page 52)... Hold the lap and shoulder belts together just behind the tongue and unbuckle the vehicle belt... Continue to hold the lap and shoulder belts together...

7

7

Stay-in-View Infant Car Seat55

Page 58

Car Seat Installation without Base

While holding the belts together, tuck the edges of the vehicle belts under the arms of the locking clip... Make sure the locking clip is posi- tioned approximately 1... 3 cm (1/2") from the sliding tongue... Buckle the vehicle belt system...

8

Stay-in-View Infant Car Seat56

1... 3

cm (1

/2 ")

8 Arms

9

9

Page 59

Stay-in-View Infant Car Seat57

Car Seat Installation without Base

Test your car seat installation again by lightly pushing on the head of the car seat... The car seat should NOT easily rotate down...

10

If, after following these installation instructions, you cannot firmly install the car seat, choose a different rear vehicle seating location to install the car seat...

IMPORTANT!

10

10

CORRECT

INCORRECT

Page 60

Carry Handle

To carry baby, simply lift using the padded handle grip...

Stay-in-View Infant Car Seat58

Page 61

Carry Strap

Unfasten the padded grip on the handle... Unfasten the strap from the hook...

Extend the carry strap...

Adjust the length of the carry strap... To Shorten the Carry Strap: - Roll the end of the carry strap to the desired length and fit it into the slot in the base...

To Lengthen the Carry Strap: - Un-roll the end of the carry strap and fit it into the slot in the base...

1

2

3

4

Stay-in-View Infant Car Seat59

3 4

1

2

Page 62

Futura 20/60 Car Seat45

Carry Strap

Place the carry strap over your head and around one shoulder... 5

5

Stay-in-View Infant Car Seat60

Page 63

Cleaning and Washing

Machine wash the pad in cold water and a mild detergent... Do not use bleach... Tumble dry on low heat...

To clean the shell, harness, canopy and strap, use a mild cleaning agent and damp cloth... Rinse with clear water to remove soap residue...

Clean the inside of the latch with a mild soap and water solution... Run warm water into the latch to remove residue... DO NOT use detergents... DO NOT lubricate the latch...

To remove the pad: Position the seat face down on a flat surface... Unfasten all six elastic loops from the pegs on the back and bottom of the shell... Turn the seat upright... Unfasten the harness latch... Unfasten the strap fasteners in the pad... Pull to remove the pad from the shell... To replace the pad: Please see assembly and setup instructions beginning on page 18...

Stay-in-View Infant Car Seat61

Page 64

SHOULDER STRAPS on three-point harness inserted in lower or upper strap slots, depending on size of child

ADJUST harness shoulder straps to fit child snugly after latching

FASTEN vehicle belt system after properly routing it on base (installation with base) or through

belt path slots (installation without base)

EVALUATE to be sure car seat is NOT installed in a vehicle seating location equipped with an airbag installation to be sure car seat is in appropriate seating location and is a firm fit in vehicle to be sure harness shoulder straps are snug against child

Safe Check

1-800-567-7724

Fisher-Price, Inc... , a subsidiary of Mattel, Inc... , East Aurora, New York 14052, U... S... A... 2001 Mattel, Inc... All Rights Reserved...

and TM designate U... S... trademarks of Mattel, Inc... Printed in U... S... A... 79052pr-0820

Manualsnet FAQs

If you want to find out how the Mattel Fisher Price works, you can view and download the Fisher Price Mattel Stay-in-View Infant Car 79052 Seat Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Fisher Price Mattel as well as other Fisher Price manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Fisher Price Mattel. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Fisher Price Mattel Stay-in-View Infant Car 79052 Seat Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Fisher Price Mattel Stay-in-View Infant Car 79052 Seat Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Fisher Price Mattel Stay-in-View Infant Car 79052 Seat Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Fisher Price Mattel Stay-in-View Infant Car 79052 Seat Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Fisher Price Mattel Stay-in-View Infant Car 79052 Seat Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.