Fisher Price Mattel Sounds n Lights 71565 Monitor Instruction Manual PDF

Pages 8
Year 1997
Language(s)
English en
1 of 8
1 of 8

Summary of Content for Fisher Price Mattel Sounds n Lights 71565 Monitor Instruction Manual PDF

Page 3

OFF ON

POWER

CHANNEL A B

Fisher-Price

Transmitter ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Sends (transmits) sounds to the receiver...

On/Off Switch ... ... ... ... ... ... ... ... ... ... ... ... ... Turns the transmitter power ONor OFF...

Power Indicator ... ... ... ... ... ... ... ... ... ... ... Lights up to let you know the transmitter is ON...

Microphone ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... For clear audio pick-up...

2-Position Channel Switch ... ... ... ... Allows you to change channels if interference occurs...

Flexible Antenna ... ... ... ... ... ... ... ... ... ... ... Aids in sound transmission...

AC Adaptor Socket (on side)... ... ... For use with the provided AC adaptor...

Receiver ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Receives signal from the transmitter to hear sound...

Volume Dial ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Controls the volume of sound...

Power Indicator ... ... ... ... ... ... ... ... ... ... ... ... Lights up to let you know the receiver is ON...

Moving Lights Display ... ... ... ... ... ... ... Shows sounds are being transmitted...

Speaker ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Allows you to hear babys sounds...

2-Position Channel Switch ... ... ... ... Allows you to change channels if interference occurs...

AC Adaptor Socket (on side)... ... ... For use with the provided AC adaptor...

Battery Compartment Door ... ... ... For easy access to battery compartment...

Flexible Antenna ... ... ... ... ... ... ... ... ... ... ... Aids in sound reception...

Belt Clip (on back) ... ... ... ... ... ... ... ... ... ... For added portability when moving from room to room...

AC Adaptors (2 included) ... ... ... ... Both the transmitter and receiver operate on standard household current (120v AC outlet) with either of these AC adaptors...

On/Off Switch ... ... ... ... ... ... ... ... ... ... ... ... ... Turns the receiver power ONor OFF...

Fisher-Price

OFF ON POWER

CHANNEL

A B

Your Sound n Lights MonitorC

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

3

18

19

19

Page 4

Battery Compartment Door

The receiver operates either with the AC adaptor included with your Sound n Lights Monitor

or with a 9 volt alkaline battery...

Locate the battery compartment door on the bottom of the receiver...

Push the finger tab on the battery compartment door to open the battery compartment door...

Snap the terminals of a fresh 9v alkaline battery into the connectors...

Close the battery compartment... Please Note: Remove the battery during long periods of non-use...

Always remove an exhausted battery from the product... Battery leakage and corrosion can damage the product...

Never short circuit the battery terminals... A non-rechargable battery is not to be recharged... Only a battery of the same or equivalent type as

recommended in the Battery Installation instructions is to be used...

IMPORTANT NOTE! To prevent entanglement, never place the transmitter in a crib or playpen... Place the transmitter, receiver and AC adaptor cord(s) out of babys reach...

OFF ON

POWER

CHANNEL A B

Fisher-Price

Channel Switch

Antenna

AC Adaptor

On/Off Switch

Power Indicator

Place the transmitter in the same room with your child... For best sound pick-up, point the microphone directly toward the crib or play area... Make sure the antenna points upward for best transmission...

For best transmission, unwrap and fully extend the AC adaptor cord... Insert the AC adaptor jack into the transmitter socket...

Insert the plug into a standard wall outlet... Set the transmitter channel switch to the same channel

as the receiver... Slide the on/off switch on the front of the transmitter to

the ONposition... The power indicator will light...

Set-Up and UseE

Plug

AC Adaptor Jack

9V

(LR6)

4

Battery InstallationD If a removeable rechargeable battery is used, it is only to be charged under adult supervision...

A rechargeable battery is to be removed from the product before it is charged...

If you use a battery charger, it should be examined regularly for damage to the cord, plug, enclosure and other parts... Do not use a damaged battery charger until it has been properly repaired...

Shown Actual Size

Transmitter

Socket

Finger Tab

Page 5

Fisher-Price

OFF ON POWER

CHANNEL

A B

If you will be using the AC adaptor to power the receiver, unwrap and fully extend the AC adaptor cord for best reception... Insert the AC adaptor jack into the side of the receiver...

Insert the plug into a standard wall outlet... Check to be sure the channel switch on the receiver is

set to the same channel as the transmitter... Slide the on/off switch on the front of the receiver to

the ONposition... The power indicator will light... Adjust the volume by turning the volume dial to a

comfortable level... The moving light display will light when sound is

received by the receiver... If all five bars in the moving light display light:

The receiver power is ONand the transmitter power is OFF... (Turn the transmitter power ON... )

The receiver is out of range of the transmitter... (Move the receiver closer to the transmitter... )

The receiver and the transmitter are not on the same channel... (Set the channel switches on the transmitter and receiver to the same channel... )

Loud sounds are transmitting... Please Note: The moving light display will not light if the battery is weak, even though you may still hear sounds... Replace the battery with a fresh, 9v alkaline battery...

To protect your privacy, be sure to turn the transmitter and receiver OFFwhen not in use...

Fisher-Price

OFF ON

POWER

CHANNEL

A B

On/Off Switch

Antenna

Volume Dial

Power Indicator

On/Off Switch

Antenna

Volume Dial

Channel Switch

AC Adaptor

Decide whether you will use the AC adaptor or a 9v alkaline battery to power the receiver... If you will be using the receiver near an outlet, we recommend using the AC adaptor...

Place the receiver where you can hear/see it... Or, wear the receiver using the convenient belt clip... Make sure the antenna points upward for best reception...

Plug

AC Adaptor Jack

Channel Switch

5

Moving Light Display

Power Indicator

Moving Light Display

Receiver AC Adaptor Use

Receiver Battery Use

Page 6

CareG Keep the Sound n Lights Monitor free from dust... The outer surface of the transmitter and receiver can be

cleaned with a cloth lightly dampened with a mild cleaning solution...

Do not immerse any part of the Sound n Lights Monitor...

It is very important to test the sound reception of the Sound n Lights Monitor before

first-time use and whenever you change the location of the transmitter...

Test the Sound n Lights Monitor transmission and reception... In the room you intend to use the transmit- ter, have an adult speak into the transmitter... (If an adult is not available,use a ticking clock or radio... ) Place the receiver in the room in which you intend to use the receiver... Adjust the receiver location or volume dial until you hear sounds clearly...

If you experience interference (buzzing, static, etc... ) while using one channel setting, switch both units to the other channel... Selecting a channel is usually a one-time adjustment...

If interference occurs on both channels or if further problems develop, please refer to the Problems and Solutions Guide beginning on page 7...

Sound ReceptionF

Sound n Lights Monitor Model Number: 1565

This device complies with Part 15 of the FCC Rules... Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation...

Fisher-Price, Inc... Consumer Affairs Department 636 Girard Avenue East Aurora, New York 14052

FCC Note (United States only)H

Fisher-Price, Inc... , 636 Girard Avenue, East Aurora, New York 14052, warrants that the Sound n Lights Monitor is free from all defects in material and workman- ship when used under normal conditions for a period of one (1) year from the date of purchase...

Should the product fail to perform properly, we will repair or replace it, free of charge... Purchaser is respon- sible for shipping the product to the address indicated above and for all associated freight and/or insurance cost... Fisher-Price, Inc... will bear the cost of shipping the repaired or replaced item to you... This warranty is void if the owner repairs or modifies the product... This warranty excludes any other liability other than the above mentioned, including but not limited to any incidental or consequential damages...

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLU- SION MAY NOT APPLY TO YOU...

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE...

Important Note: The electronic components in the Soundn Lights Monitor are not designed for consumer repair... Evidence of any attempt at consumer repair will void the warranty... Return the AC adaptors, transmitter and receiver (please remove the battery from the receiver before sending to Fisher-Price, Inc... for service)...

One (1) Year Limited WarrantyI

6

Page 7

PROBLEM PROBABLE CAUSE SOLUTION

Transmitter power Transmitter not turned ON Turn the transmitter ON... indicator does not light

Power is turned OFF Make sure that any light switches that control power flow to the wall outlet are ON...

Make sure house fuses and circuit breakers are ON...

AC adaptor not properly connected Check AC adaptor jack-to-socket and plug-to-outlet connections...

AC adaptor problem Test the transmitter using the other AC adaptor included with this product... If the transmitter works with the other AC adaptor, call Fisher-Price at 1-800-432-KIDS to replace the broken AC adaptor...

Receiver power Receiver not turned ON Turn the receiver ON... indicator does not light

Power is turned OFF Make sure that any light switches that control power flow to the wall outlet are ON...

Make sure house fuses and circuit breakers are ON...

AC adaptor not properly connected Check AC adaptor jack-to-socket and plug-to-outlet connections...

AC adaptor problem Test the receiver using the other AC adaptor included with this product... If the receiver works with the other AC adaptor, call Fisher-Price at 1-800-432-KIDS to replace the broken AC adaptor...

Weak or dead battery Replace the battery in the receiver with a fresh 9v alkaline battery or use the AC adaptor...

No sound Channel switches not on same setting Set channel switch on transmitter and receiver to the same channel...

Signal interference due to other nursery Change the channel setting on both the transmitter and the monitors, cordless telephones, etc... receiver...

Identify and eliminate the source of interference...

Test reception by moving the transmitter and/or receiver to different locations throughout the house... Relocate the transmitter and/or receiver...

Out of range or insufficient signal Test reception by moving the transmitter and/or receiver to different locations throughout the house... Relocate the transmitter and/or receiver...

Volume not turned up Adjust volume control on receiver...

Improper antenna position Make sure the antenna on the transmitter and receiver are pointing upward...

Weak or dead battery in receiver Replace the battery in the receiver with a fresh 9v alkaline battery or use the AC adaptor...

AC adaptor not properly connected Check AC adaptor jack-to-socket and plug-to-outlet connections...

IMPORTANT! If you have a problem with the Sound n Lights Monitor, first check the Problems and Solutions Guide below... If you still experience a problem with the Sound n Lights Monitor, call Fisher-Price

Consumer Affairs, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST Monday through Friday... Hearing-impaired consumers using TTY/TDD equipment,

please call 1-800-382-7470... Or, write to: Fisher-Price Consumer Affairs, 636 Girard Avenue, East Aurora, New York 14052...

Problems and Solutions GuideJ

7

Page 8

8

Weak reception Out of range or insufficient signal Test reception by moving the transmitter and/or receiver to different locations throughout the house... Relocate the transmitter and/or receiver...

AC adaptor cord(s) not fully extended Fully extend AC adaptor cord(s)...

Improper antenna position Make sure antennas are pointing upward...

Receiver moving light Weak or dead battery in receiver Replace the battery in the receiver with a fresh 9v alkaline display does not light battery or use the AC adaptor...

Interference Signal interference due to other Change channel switch on both transmitter and receiver to the (buzzing, static, etc... ) nursery monitors or cordless other channel...

telephones, etc... Identify and eliminate source of interference... Do not use more than one receiver or transmitter at the same time in the same house...

Channel switches not on Check channel switch on transmitter and receiver to be sure same setting they are on the same channel...

Feedback Receiver is too close to the Move receiver further away from transmitter... (squealing or whistling) transmitter

Volume is set too high Lower volume on the receiver...

All five bars on the Receiver power is ON but Turn the transmitter power ON... receiver moving light transmitter power is OFF display light

Out of range or insufficient signal Move the receiver closer to the transmitter...

Channel switches not on same Check channel switches on transmitter and receiver to be sure setting they are on the same channel...

AC adaptor not properly connected Check AC adaptor jack-to-socket and plug-to-outlet connections... to transmitter

PROBLEM PROBABLE CAUSE SOLUTION

If you have any questions about this product:

In Canada, call 1-800-567-7724, or write to: Mattel/Fisher-Price, 6155 Freemont Blvd... , Mississauga, Ontario L5R 3W2...

In Great Britain, telephone 01734 770488...

In Australia, call the Fisher-Price Australian Consumer Advisory Service toll-free at 1-800-800-812, or write to: Fisher-Price, Mattel Pty... Limited, 461 Plummer Street, Port Melbourne,Victoria 3207...

Manualsnet FAQs

If you want to find out how the Mattel Fisher Price works, you can view and download the Fisher Price Mattel Sounds n Lights 71565 Monitor Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Fisher Price Mattel as well as other Fisher Price manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Fisher Price Mattel. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Fisher Price Mattel Sounds n Lights 71565 Monitor Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Fisher Price Mattel Sounds n Lights 71565 Monitor Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Fisher Price Mattel Sounds n Lights 71565 Monitor Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Fisher Price Mattel Sounds n Lights 71565 Monitor Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Fisher Price Mattel Sounds n Lights 71565 Monitor Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.