Fisher Price Mattel Adjustable High 79372 Chair Instruction Manual PDF

1 of 8
1 of 8

Summary of Content for Fisher Price Mattel Adjustable High 79372 Chair Instruction Manual PDF

Adult assembly is required. Please keep these instructions for future reference.

Tool needed for assembly: Phillips Screwdriver.

Adjustable High Chair Model Numbers: 79261, 79372, 79373

WARNING To prevent injuries from falls or sliding

out: - Your child should be secured in the

high chair at all times by the restraint belts. The restraint belts must be adjusted to fit your child snugly.

- The tray is not designed to hold your child in the high chair.

- Always keep your child in full view while in the high chair.

- Never leave your child unattended. We recommend that the high chair be

used only by children capable of sitting upright unassisted.

CAUTION Please keep small parts, such as hardware, scrap plastic pieces and plastic bags, out of childrens reach. Dispose of the scrap plastic pieces

and plastic bags properly.

Thank you for choosing Fisher-Price.The Fisher-Price Adjustable High Chair is designed for baby's changing needs. Use it as a high chair for mealtime; or a youth chair without the tray to sit at the family table; or as a child's chair with or without the tray. We believe you will find its features and traditionally durable construction a great help in the day-to-day care of your child.

The Fisher-Price Adjustable High Chair requires adult assembly. Please read these instructions thoroughly and identify all parts before assembly. Refer to the parts illustration for identification.

Call Fisher-Price Consumer Affairs, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST Monday through Friday. Hearing-impaired con- sumers using TTY/TDD equipment, please call 1-800-382-7470. Or, write to: Fisher-Price Consumer Affairs, 636 Girard Avenue, East Aurora, New York 14052.

Lower Seat Pad

Upper Seat Pad

Front Brace

(BOTH SHOWN ACTUAL SIZE) 11/2" Screw 12

Back Brace

3/4" Screw 4

Right Leg

Footrest

Tray

Seat with Restraint Belts

Retainer - 2

Support Tube

Left Leg

2

Message to Parents

1996 Fisher-Price, Inc., East Aurora, New York 14052. Printed in U.S.A. 79261, 79372, 79373 1 79261-0920

Turn the assembly so that the Fisher-Price logo on the front brace faces away from you.

Place the seat onto the legs so that the pegs on both sides of the seat fit into the top slots on the legs.

Place the left leg (labeled "L") onto the front brace. Insert two 11/2" screws into the left leg and tighten with a

Phillips screwdriver. Do not over-tighten. Slide both triangles all the way down.

Assembly

Fit the front brace into the right leg (labeled "R"). Insert two 11/2" screws into the right leg and tighten with a

Phillips screwdriver. Do not over-tighten.

R

Insert two 11/2" screws into each leg and tighten with a Phillips screwdriver. Do not over-tighten.

Fit the back brace between the left and right legs.

Front Brace

"R"

Right Leg

Front Brace

Triangle

Fit the support tube, into the rectangular grooves in the triangles.

Insert four 11/2" screws into the support tube and tighten with a Phillips screwdriver. Do not over-tighten.

Leg Top Slot

Seat

Peg

Back Brace

Left Leg

Right Leg

Triangle "L"

Left Leg

Support Tube

Peg

3

Top Slot

Position the Adjustable High Chair seating side down. Rotate the leg assembly toward the seat back.

Fit the retainers over the support tube and onto the seat bottom pegs.

Insert two 3/4" screws into each retainer and tighten with a Phillips screwdriver. Do not over-tighten.

Large Peg

Hole

Position the Adjustable High Chair upright so that the front faces you.

Make sure the footrest support hangs freely, as shown. Insert the large peg on the footrest into the large hole in

the seat. Slide the small peg on the footrest into the small hole in

the seat.

Footrest Support

Footrest

Rotate the leg assembly toward the seat bottom. The support tube should rest in the groove in the seat bottom.

Push the support tube and triangles all the way down to the seat bottom.

Small Peg

Support Tube

Seat Bottom

Triangle

Groove

Seat Bottom

Support Tube

Retainers

Support Tube

Triangle

Assembly

Seat Back

4

Position the Adjustable High Chair seating side down. Rotate the footrest support toward the seat bottom. Insert one side of the footrest support into a retainer. Insert the other side of the footrest support into the other

retainer.

Position the Adjustable High Chair upright. Lift the restraint belts. Place the lower seat pad on the seat. Insert the fastener straps into the slots in the seat.

Slots

Fit the upper seat pad over the seat back. Insert the upper seat pad tabs through the slots in the seat

back.

Turn the Adjustable High Chair so that the back is facing you.

Look under the seat and attach the lower seat pad fastener straps to the fasteners.

Fastener

Remove the excess plastic from the cut-out holes in the upper seat pad tabs. Dispose of the scrap plastic pieces properly.

Attach the upper seat pad tabs to the pegs on the back of the seat.

Attach the fasteners on both sides of the seat. One-time assembly is now complete.

Fastener Straps

Lower Seat Pad

Retainers

Footrest Support

Restraint Belts

Upper Seat Pad

Tab

Slots

Tab

Lower Seat Pad Fastener Straps

Fasteners

Peg Tabs

5

Assembly

CAUTION Please keep small parts such as

the scrap plastic pieces, out of childrens reach. Dispose of the scrap plastic pieces properly.

To lock desired height: Pull the seat handle back and then push the seat down . Push down on the seat bottom to be sure the seat is secure at

the desired height. Make sure both sides of the seat are adjusted to the same

height.

To adjust height: Lift the seat handle and then push the seat forward . While pushing forward on the seat, slide the seat up or down

to the desired height .

Seat Height Adjustment IMPORTANT! Do not adjust the seat height with your child in the Adjustable High Chair.

Footrest Adjustment

Lower Position

Upper Position

Slide the footrest support to the back groove for the upper position.

Slide the footrest support to the front groove for the lower position.

The footrest can be adjusted to an upper or lower position.

Back Groove

Front Groove

Seat Handle

Seat Handle

Footrest Support

Operation and Use

6

Restraint Belts Tray Use

The tray can be adjusted with one hand: Press the tray adjustment button, located on the front of

the tray. While pressing the tray adjustment button, the tray can be

moved forward to a stop or backward to a stop. Release the tray adjustment button to lock the tray in the

desired position.

Press both side latches located underneath the tray. Place the tray onto the seat. Release both side latches to lock the tray in place.

WARNING

Pull the free end of each waist belt to tighten for a snug fit. To release both waist belts, push the tab on the buckle.

Tray Attachment

One-Hand Tray Adjustment

Tray Adjustment Button

Free End

Free End

Buckle Tab

Make sure the crotch belt is on top of the seat pad. Place your child in the Adjustable High Chair. Fasten both waist belts to the crotch belt. Make sure you

hear a click on both sides! Pull on the waist belts to be sure the restraint system is

secure.

Your child should be secured in the high chair at all times by the restraint belts. The restraint belts must be adjusted

to fit your child snugly.

WARNING The tray is not designed to hold your

child in the high chair.

Side Latch

Crotch Belt

Waist Belt Waist Belt

7

Side Latch

Operation and Use

Tray Removal

Cleaning We recommend that you periodically clean and inspect the Fisher-Price Adjustable High Chair to be sure it functions prop- erly. The tray, frame, and pads can be cleaned with a sponge and a mild soap and water solution. Do not immerse the tray or pad. To remove the restraint belts and pads for additional clean- ing, refer to the instructions which follow.

To remove the pads: Unfasten the fastener straps from underneath the Adjustable

High Chair to remove the lower pad. Remove the two tabs from the pegs on the seat back, and

unfasten the fasteners on both sides of the seat to remove the upper pad.

Press both side latches underneath the tray and lift. The tray can also be removed with one hand:

Press either side latch located underneath the tray. Lift the tray and then push it off the opposite arm.

T End

To remove the restraint belts: Turn the Adjustable High Chair so that the back is facing you. Locate the T end of one of the the restraint straps and fold

it flat. Insert the T end of the restraint strap through the slot in the

seat back. Repeat this procedure to remove the other restraint straps. Please Note: To clean the restraint belts, hand or machine wash them in a mild detergent and warm water. Tumble dry on a low temperature.

Slots

The tray can also be adjusted with two hands: Press both side latches located underneath the tray and

move the tray forward or backward. Release both side latches to lock the tray in the desired

position.

Side Latch

Side Latch

Free End

Waist Belt

Free End

To replace the restraint belts: Turn the Adjustable High Chair so that the front is facing you. Fold the "T" end of one of the waist belts flat. Insert the "T" end of the waist belt through the slot in the

seat back. Repeat this procedure to attach the other waist belt. Pull the waist belts forward to be sure they are secure. Make sure the free end of each waist belt is toward the out-

side of the Adjustable High Chair. Fold the "T" end of the crotch belt flat and insert it into the

slot behind the seat cushion. Pull up on the crotch belt until you feel resistance to be sure

it is secure.

Waist Belt

If you have any questions about this product: In Canada, call 1-800-567-7724, or write to: Mattel/Fisher-Price, 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2. In Great Britain, telephone 01734 770488. In Australia, call the Fisher-Price

Manualsnet FAQs

If you want to find out how the Mattel Fisher Price works, you can view and download the Fisher Price Mattel Adjustable High 79372 Chair Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Fisher Price Mattel as well as other Fisher Price manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Fisher Price Mattel. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Fisher Price Mattel Adjustable High 79372 Chair Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Fisher Price Mattel Adjustable High 79372 Chair Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Fisher Price Mattel Adjustable High 79372 Chair Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Fisher Price Mattel Adjustable High 79372 Chair Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Fisher Price Mattel Adjustable High 79372 Chair Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.