Fisher Price Mattel Cuddle n Comfort Soothing 79598 Bouncer Instruction Manual PDF

1 of 16
1 of 16

Summary of Content for Fisher Price Mattel Cuddle n Comfort Soothing 79598 Bouncer Instruction Manual PDF

SOOTHING SOUNDS BOUNCER SEAT

Model Number: 79598

Please save these instructions for future reference. Adult assembly is required. Tools required for assembly: Phillips Screwdriver

and adjustable wrench (not included). Requires three C (LR14) alkaline batteries (not included).

2

Occasionally a consumer may experience a problem with one of our products.

If this should happen, please call us toll-free, rather than return this product to the store.

Usually, we can solve the problem over the telephone or send you replacement parts.

Please call Fisher-Price Consumer Relations, toll-free at 1-800-432-KIDS,

between 8 AM - 6 PM EST, Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment,

please call 1-800-382-7470. Or write to:

Fisher-Price Consumer Relations 636 Girard Avenue

East Aurora, New York 14052

CONSUMER INFORMATION

WARNINGS

To prevent serious injury and/or falls: Never use on any elevated surface. Never use as a carrier or lift while child

is seated. Always use the restraint system. Never leave child unattended. Never use as a car seat. Never use with a child able to sit

up, unassisted.

WARNING

3

PARTS

1/2" Screw - 2

3 Toys

Pad

Footrest

Seatback Tube

Right Base Tube

Left Base Tube

Base Connector

Cuddle Cushion

Shown Actual Size

Lock Nut - 2

4

BATTERY INSTALLATION

Locate the soothing unit on the footrest wire. Loosen the screw in the soothing unit battery compartment door with a

Phillips screwdriver. Remove the battery compartment door. Insert three "C" (LR14) batteries, as indicated inside the battery compartment. Replace the battery compartment door. Tighten the screw with a Phillips screwdriver.

Do not over-tighten.

Battery Compartment Door

1.5V x 3 C (LR14)

SHOWN ACTUAL SIZE +

Battery Tips Do not mix old and new batteries. Do not mix different types of batteries: alkaline, standard (carbon-zinc) or

rechargeable (nickel-cadmium). Remove the batteries during long periods of non-use. Always remove the

exhausted batteries from the product. Battery leakage and corrosion can damage the product. Dispose of the batteries safely.

Never short circuit the battery terminals. Non-rechargeable batteries are not to be recharged. Only batteries of the same or equivalent type as recommended in the Battery

Installation instructions are to be used. If removable rechargeable batteries are used, they are only to be charged under

adult supervision. Rechargeable batteries are to be removed from the product before they

are charged. If you use a battery charger, it should be examined regularly for damage to the

cord, plug, enclosure and other parts. Do not use a damaged battery charger until it has been properly repaired.

5

ASSEMBLY

Place the base connector on a flat surface as shown. Position the left and right base tubes as shown. Note the locations of the

colored dots on the left and right base tubes. Fit the left base tube into the base connector. Fit the right base tube into the base connector. Make sure both colored dots on the base tubes are covered by the

base connector.

1

This package contains small parts in its unassembled state.

Adult assembly is required.

CAUTION

Base Connector

Colored Dots Right Base

Tube

Left Base Tube

6

Position the footrest so that the soothing unit is upright.

While flexing the base tubes toward each other, hook the footrest onto the ends of the base tubes.

Push the footrest down completely, to the tabs on the base tubes. Make sure the small tabs on the left and right base wires are secure in

the base connector holes (see inset). If the small tabs are not secure in the base connector holes, you have assembled the base incorrectly. Disassemble all parts and refer back to Assembly Step 1.

ASSEMBLY

2 Base Tube

Tab

Tab

Base Tube

Soothing Unit

Footrest

Back View

Base Connector

Base Tube

7

3

Position the seat back tube above the base assembly. The seat back tube should bend backward.

Fit the seat back tube completely onto the base tubes. Insert a screw through the hole in the outside of the seat back tube. Attach a lock nut to the end of the screw on the inside of the seat

back tube. While holding the lock nut in place with an adjustable wrench, tighten

the screw with a Phillips screwdriver. Do not over-tighten. Repeat this procedure to secure the other side of the seat back tube

to the base assembly using the remaining screw and lock nut.

ASSEMBLY

Base Tube

Base Tube

Seat Back Tube

8

ASSEMBLY

Pull up on the seat back tube to be sure it is secure. If you can remove either end of the seat back tube, you have not assembled it correctly. Remove the screws and lock nut. Re-read and repeat Assembly steps 3 and 4.

Pull Up

4

9

ASSEMBLY

Position the pad with the canopy up. Fit the upper pocket on the back of the pad onto the seat back tube . Lift the footrest. Fit the lower pocket on the back of the pad onto the

footrest . Lower the footrest. Attach the pad fastener to the fastener on the soothing unit.

A

B

5

Seat Back Tube

Footrest

Pad

Fastener

B

Fastener

10

Attach the toys to the canopy fasteners.

8

3 Toys

6

ASSEMBLY

11

SET-UP & USE

Securing Your Child Place your child in the seat. Position the restraint between your childs legs. Fasten both belts to the buckles on each side of the restraint. Make sure

you hear a click on both sides. Check to be sure the restraint is securely attached by pulling it away from

your child. The restraint should remain attached.

To prevent serious injury and/or falls: Never use on any elevated surface. Never use as a carrier or lift while child

is seated. Always use the restraint system. Never leave child unattended. Never use with a child able to sit

up, unassisted.

WARNING

Belt

Buckle

Restraint

1

To tighten the belts: Feed the anchored end of the belt up through the buckle to form a

loop . Pull the free end of the belt strap . Repeat this procedure to tighten the other belt strap.

To loosen the belts: Feed the free end of the belt up through the buckle to form a loop .

Enlarge the loop by pulling on the end of the loop toward the buckle. Pull the anchored end of the belt strap to shorten the free end of the

belt strap . Repeat this procedure to loosen the other belt strap. Please Note: After adjusting the belts to fit your child, make sure you pull on them to be sure they are securely fastened.

12

SET-UP & USE

LoosenTighten

B

Anchored End

Free End

Anchored EndBuckle

Free End

Buckle B

2

B

B

Fit the cuddle cushion around the base of babys head. Fold blanket up on babys lap.

3 Cuddle Cushion

Blanket

13

SET-UP & USE

Soothing Sounds and Vibrations Make sure your child is properly secured in the seat. First, slide the switch on the soothing unit to select soothing sounds,

soothing vibrations or both!

Soothing Sounds (various lullabies)

Soothing Vibrations

Soothing Sounds and Vibrations

Then press the ON/OFF button on the soothing unit to turn the unit on. Hints: After each soothing selection, be sure to press the ON/OFF button again

to turn the soothing unit on. If you slide the switch too quickly, the soothing unit will not turn off.

Simply press the ON/OFF button to turn the soothing unit off, then press again to turn back on.

Press the ON/OFF button to turn the soothing unit off. Soothing sounds and/or vibrations will shut off automatically after

10-15 minutes. To turn back on, simply press the ON/OFF button.

IMPORTANT! If vibrations or sounds from the soothing unit become faint, or if there are no vibrations or sounds, remove the batteries from the soothing unit and dispose of them properly. Replace the batteries with three new C (LR14) alkaline batteries.

4

14

SET-UP & USE

Canopy Adjustment The canopy can be adjusted up or down.

5 Canopy Down

Canopy Up

15

To remove the pad: Remove both canopy stays from the canopy sleeves. Lift the footrest wire and remove the pad lower pocket. Slide the pad upper pocket off of the seat back wire.

To re-assemble the pad: Replace the canopy stays into the canopy sleeves. Refer to Assembly step 5.

The pad and toys are machine washable. Wash them separately in cold water on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly. The frame may be wiped clean using a mild cleaning solution and a damp cloth. Do not immerse the soothing unit.

Canopy Sleeves

Canopy Stays

CARE

16

FCC NOTE (UNITED STATES ONLY Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu- lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or

Manualsnet FAQs

If you want to find out how the Mattel Fisher Price works, you can view and download the Fisher Price Mattel Cuddle n Comfort Soothing 79598 Bouncer Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Fisher Price Mattel as well as other Fisher Price manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Fisher Price Mattel. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Fisher Price Mattel Cuddle n Comfort Soothing 79598 Bouncer Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Fisher Price Mattel Cuddle n Comfort Soothing 79598 Bouncer Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Fisher Price Mattel Cuddle n Comfort Soothing 79598 Bouncer Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Fisher Price Mattel Cuddle n Comfort Soothing 79598 Bouncer Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Fisher Price Mattel Cuddle n Comfort Soothing 79598 Bouncer Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.