Fisher Price Mattel Comfy Time BMM96 Bouncer Instruction Manual PDF

1 of 12
1 of 12

Summary of Content for Fisher Price Mattel Comfy Time BMM96 Bouncer Instruction Manual PDF

1

BMM96

fisher-price.com

IMPORTANT! Please keep this instruction sheet for future reference, as it contains important information. Please read these instructions before assembly and use of this product.

Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included).

Assembly instructions on back side of this sheet.

Requires one D (LR20) alkaline battery (not included) for soothing unit operation.

Use from birth until the child is able to sit up unassisted.

Product features and decorations may vary from photographs.

IMPORTANTE! Guardar estas instrucciones para futura referencia, ya que contienen informacin de importancia acerca de este producto. Leer estas instrucciones antes de ensamblar y usar este producto.

Requiere montaje por un adulto. Herramienta necesaria para el montaje: desatornillador de cruz (no incluido).

Ver el dorso de esta hoja para las instrucciones de montaje.

La unidad relajante funciona con 1 pila alcalina D (LR20) x 1,5V (no incluida).

Usar a partir del nacimiento y hasta que el beb pueda incorporarse por s solo.

Las caractersticas y decoracin del producto pueden variar de las mostradas.

2

AYUDA AL CONSUMIDOR 1-800-432-5437 (US)

Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.

Hearing-impaired consumers/Clientes con problemas auditivos 1-800-382-7470.

Centro de Servicio en Mxico: 59-05-51-00 Ext. 5206 01-800-463-59-89

MXICO

Importado y distribuido por Mattel de Mxico, S.A. de C.V., Miguel de Cervantes Saavedra No. 193, Pisos 10 y 11, Col. Granada, Delegacin Miguel Hidalgo, C.P. 11520, Mxico, D.F. R.F.C. MME-920701-NB3. CHILE

Mattel Chile, S.A., Avenida Amrico Vespucio 501-B, Quilicura, Santiago. Tel.: 1230-020-6213. VENEZUELA

Servicio al consumidor Venezuela: Tel.: 0-800-100-9123.

ARGENTINA

Mattel Argentina, S.A., Curupayt 1186, (1607) Villa Adelina, Buenos Aires. Tel.: 0800-666-3373. COLOMBIA

Mattel Colombia, S.A., Calle 123#7-07 P.5, Bogot. Tel.: 01800-710-2069. PER

Mattel Per, S.A., Av. Juan de Arona # 151, Centro Empresarial Juan de Arona, Torre C, Piso 7, Oficina 704, San Isidro, Lima 27, Per. RUC: 20425853865. Reg. Importador: 02350-12-JUE-DIGESA. Tel.: 0800-54744. E-mail Latinoamrica: Servicio.Clientes@Mattel.com.

2013 Mattel. All Rights Reserved. PRINTED IN CHINA BMM96pr-0821

3

WARNING

ADVERTENCIA

To prevent serious injury or death: Fall Hazard - Never use on any elevated surface, since childs movement

may cause product to slide or tip over. Use only on a floor. Suffocation Hazard - Never use on a soft surface (bed, sofa, cushion) since

product can tip over and cause suffocation in soft surfaces. Never use as a carrier or lift while child is seated. Never use the toy bar as

a handle. Always use the restraint system. This product is not intended to replace a crib or bassinet for prolonged

periods of sleep. Never leave child unattended. Never use for a child able to sit up unassisted.

Para evitar lesiones graves o la muerte: Peligro de cadas: No usar en superficies elevadas, ya que el movimiento

del nio puede causar que el producto se resbale o voltee. Usar nicamente sobre el piso.

Peligro de asfixia: No usar en superficies suaves (cama, sof, cojn), ya que el producto puede voltearse y causar asfixia en superficies suaves.

No usar como cargador o levantarla mientras el nio est sentado en ella. No usar la barra de juguetes como asa.

Siempre usar el sistema de sujecin. Este producto no est diseado para reemplazar una cuna o moiss por

periodos prolongados de sueo. No dejar al nio fuera de su alcance. No usar con nios que pueden incorporarse por s solos.

IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price for replacement parts and instructions if needed. Never substitute parts.

IMPORTANTE! Antes del montaje y de cada uso, revisar que el producto no tenga piezas daadas, conexiones sueltas, piezas faltantes o bordes filosos. NO usar el producto si falta o est rota alguna pieza. Pngase en contacto con la oficina Mattel ms prxima a su localidad para obtener piezas de repuesto e instrucciones, en caso de ser necesarias. Visite http://service. mattel.com/intl/es. asp para un listado completo. No usar piezas de terceros.

4

Securing Your Infant Sistema de sujecin

To tighten the restraint belts: Feed the anchored end of the restraint belt up through the buckle to form a loop A . Pull the free end of the restraint belt B .

To loosen the restraint belts: Feed the free end of the restraint belt up through the buckle to form a loop A . Enlarge the loop by pulling on the end of the loop toward the buckle. Pull the anchored end of the restraint belt to shorten the free end of the restraint belt B .

Para apretar los cinturones de seguridad: Introducir el extremo fijo del cinturn de seguridad en la hebilla para formar un espacio A . Jalar el extremo libre del cinturn de seguridad B .

Para aflojar los cinturones de seguridad: Introducir el extremo libre del cinturn de seguridad en la hebilla para formar un espacio A . Agrandar el espacio jalando el extremo libre del cinturn hacia la hebilla. Jalar el extremo fijo del cinturn de seguridad para acortar el extremo libre del cinturn de seguridad B .

Place your child in the seat. Position the restraint pad between your childs legs.

Fasten the restraint belts to the restraint pad. Make sure you hear a click on both sides.

Tighten each waist belt so that the restraint system is snug against your child. Please refer to the next section for instructions to tighten the waist belts.

Check to be sure the restraint system is securely attached by pulling it away from your child. The restraint system should remain attached.

Sentar al nio en la silla. Colocar la almohadilla de sujecin entre las piernas del nio.

Ajustar los cinturones de seguridad en la almohadilla de sujecin. Asegurarse de or un clic en ambos lados.

Apretar cada cinturn de modo que el sistema de sujecin quede bien ajustado al nio/a. Consultar la siguiente seccin para mayores detalles sobre cmo apretar los cinturones.

Asegurarse de que el sistema de sujecin est bien asegurado, jalndolo en direccin opuesta al nio. El sistema de sujecin debe permanecer conectado.

TIGHTEN APRETAR

LOOSEN AFLOJAR

Restraint Belts Cinturones de seguridad

Restraint Pad Sistema de sujecin

1

2

5

Soothing Unit Unidad relajante

Care Mantenimiento

The pad is machine washable. Wash it separately in cold water on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly.

To remove the pad: Pull to remove the pad from around the retainers and the soothing unit. Remove the bottom pocket of the pad from the footrest. Lift to remove the pad. To replace the pad, refer to Assembly steps 7-8.

The frame, toy bar and toys may be wiped clean using a mild cleaning solution and damp cloth. Do not immerse the toy bar. Do not use bleach. Do not use harsh or abrasive cleaners. Rinse clean with water to remove residue.

La almohadilla se puede lavar a mquina. Lavarla por separado en agua fra, en ciclo para ropa delicada. No usar blanqueador. Meter a la secadora por separado a temperatura baja y sacar inmediatamente despus de finalizado el ciclo.

Para quitar la almohadilla: Jalar para desprender la almohadilla alrededor de los retenedores y la unidad relajante. Retirar la funda inferior de la almohadilla del reposapis. Levantar para retirar la almohadilla. Para poner la almohadilla en su lugar, consultar los pasos de montaje 7-8.

Pasarles un pao humedecido en una solucin limpiadora neutra al armazn, barra de juguetes y juguetes. No sumergir la barra de juguetes. No usar blanqueador. No usar limpiadores fuertes o abrasivos. Enjuagar con agua para eliminar el residuo.

Make sure your child is properly secured in the seat.

Slide the power switch to: Vibrations or Off.

IMPORTANT! Low battery power causes this product to operate erratically: no vibrations and the product may not turn off. Remove and discard the battery and replace with a new D (LR20) alkaline battery.

Asegurarse de que el nio est bien asegurado en la silla.

Poner el interruptor de encendido en: Vibraciones o Apagado.

IMPORTANTE! Si la pila est gastada, el producto no funcionar correctamente (sin vibraciones ni funcin de apagado). Sacar y desechar la pila y sustituirla por 1 pila nueva alcalina D (LR20) x 1,5V.

Power Switch Interruptor de encendido

6

Parts Piezas IMPORTANT! Please remove all parts from the package and identify them before assembly. Some parts may be packed in the pad.

IMPORTANTE! Sacar todas las piezas del empaque e identificarlas previo al montaje. Algunas piezas pueden venir embaladas en el colchn.

Right Base Wire Tubo de base derecho

Footrest Reposapis

Seat Back Tube Tubo del respaldo

Toy Bar Barra de juguetes

2 Feet 2 patas

Base Tube Tubo de la base

Left Base Wire Tubo de base izquierdo

Pad Almohadilla

M5 x 20 mm Screw 4 Tornillo M5 x 20 mm 4

Note: Screw shown actual size. Tighten or loosen all screws with a Phillips screwdriver. Do not over-tighten the screws.

Atencin: El tornillo se muestra a tamao real. Apretar y aflojar todos los tornillos con un desatornillador de cruz. No apretar en exceso.

7

Assembly Montaje

Position the footrest so that the soothing unit is upright.

Fit the footrest onto the ends of the base wires.

Colocar el reposapis de modo que la unidad relajante est en posicin vertical.

Ajustar el reposapis en los extremos de los tubos de la base.

Insert an M5 x 20 mm screw through each foot and tighten.

Introducir un tornillo M5 x 20 mm en cada pata y apretarlos.

Position the feet so the non-skid surface is down.

Fit the feet on the base tube, as shown.

Colocar las patas de modo que la superficie antiderrapante est hacia abajo.

Ajustar las patas en el tubo de la base, tal como se muestra.

Place the base tube on a flat surface. Position the left and right base wires as shown.

Fit the left base wire and right base wire into the base tube.

Poner el tubo de la base sobre una superficie plana.

Colocar los tubos de base izquierdo y derecho tal como se muestra.

Introducir los tubos de base izquierdo y derecho en el tubo de la base.

Base Wires Tubos de base

Right Base Wire Tubo de base derecho1

Base Tube Tubo de base

Left Base Wire Tubo de base izquierdo

2 Non-skid Surface Superficie antiderrapante

3

4

Footrest Reposapis

8

Position the pad above the frame. Fit the upper pocket on the back of the pad onto the seat back tube.

Colocar la almohadilla sobre el armazn. Ajustar la funda superior del dorso de la almohadilla sobre el tubo del respaldo.

Make sure the socket in each retainer is upright.

Fit the seat back tube onto the ends of the base wire.

Push the seat back tube to be sure it is completely on the base wires.

Asegurarse de que la conexin de cada retenedor est en posicin vertical.

Introducir el tubo del respaldo totalmente en los extremos del tubo de la base.

Empujar el tubo del respaldo para asegurarse de que est totalmente ajustado en los tubos de la base.

Insert an M5 x 20 mm screw in each hole in the seat back tube, base wire and into the inside of the retainer. Tighten the screw.

Pull the seat back tube up to be sure it is secure.

Insertar un tornillo M5 x 20 mm en cada orificio del tubo del respaldo, tubo de la base y en el interior del retenedor. Apretar los tornillos.

Jalar hacia arriba el tubo del respaldo para asegurarse que est seguro.

Pad Seat Back Pocket Funda del respaldo de la almohadilla

Seat Back Tube Tubo del respaldo

5

6

Assembly Montaje

7

Retainer Socket Up Conexin de retenedor hacia arriba

9

Assembly Montaje

Insert and snap the toy bar plugs into each retainer socket.

Hint: The toy bar is removable. Press the ends of the latches and lift the toy bar.

Insertar y ajustar los enchufes de la barra de juguetes en cada conexin del retenedor.

Atencin: La barra de juguetes es desprendible. Jalar los extremos de los seguros y levantar la barra de juguetes.

Fit the lower pocket on the back of the pad onto the footrest.

Fit the retainers through the side openings in the pad.

Fit the edges of the soothing unit through the large opening in the front of the pad.

Ajustar la funda inferior del dorso de la almohadilla sobre el reposapis.

Introducir los retenedores en los orificios laterales de la almohadilla.

Ajustar los bordes de la unidad relajante en el orificio grande del frente de la almohadilla.

Sockets Conexiones

Toy Bar Plugs Enchufes de la barra de juguetes

Soothing Unit Unidad relajante

8

Retainers Retenedores

9

10

Battery Installation Colocacin de la pila

Loosen the screw in the battery compartment door. Remove the battery compartment door.

Insert one D (LR20) alkaline battery into the battery compartment.

Replace the battery compartment door and tighten the screw.

Pull and fit the pad seat bottom pocket around the soothing unit and footrest.

If this product begins to operate erratically, you may need to reset the electronics. Slide the power switch off and then back on.

Aflojar el tornillo de la tapa del compartimento de la pila. Retirar la tapa.

Insertar 1 pila alcalina D (LR20) x 1,5V en el compartimento.

Cerrar la tapa del compartimento de la pila y apretar el tornillo.

Jalar y ajustar la funda de la parte de abajo de la almohadilla alrededor de la unidad relajante y el reposapis.

Si este producto no funciona correctamente, restablecer el circuito electrnico. Poner el interruptor de encendido en apagado y nuevamente en encendido.

Pull to remove the pad from around the retainers and the soothing unit A .

Remove the pad bottom pocket from the footrest B .

Jalar para desprender la almohadilla alrededor de los retenedores y la unidad relajante A .

Retirar la funda de la parte de abajo de la almohadilla del reposapis B .

Hint: We recommend using an alkaline battery for longer battery life.

Atencin: Se recomienda usar una pila alcalina para una mayor duracin.

B

A

A

1

+ 1,5V

D (LR20)

2

11

Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

Insert batteries as indicated inside the battery compartment.

Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of product in a fire. The batteries inside may explode or leak.

Never short-circuit the battery terminals. Use only batteries of the same or equivalent type as recommended.

Do not charge non-rechargeable batteries. Remove rechargeable batteries from the product before charging.

If removeable, rechargeable batteries are used, they are only to be charged under adult supervision.

Informacin de seguridad sobre las pilas En circunstancias excepcionales, las pilas pueden derramar lquido que puede causar quemaduras o daar el producto. Para evitar derrames: No mezclar pilas nuevas con gastadas ni mezclar pilas alcalinas, estndar (carbono- cinc) o recargables (nquel-cadmio).

Cerciorarse de que la polaridad de las pilas sea la correcta.

Sacar las pilas gastadas del producto y desecharlas apropiadamente. Sacar las pilas si el producto no va a ser usado durante un periodo prolongado. No quemar las pilas ya que podran explotar o derramar el lquido incorporado en ellas.

No provocar un cortocircuito con las terminales.

Usar slo el tipo de pilas recomendadas (o su equivalente).

No cargar pilas no recargables. Sacar las pilas recargables antes de cargarlas. La carga de las pilas recargables slo debe realizarse con la supervisin de un adulto.

ICES-003 This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

NMB-003 Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Lutilisation de ce dispositif est autorise seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) lutilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.

Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities.

Proteger el medio ambiente no desechando este producto en la basura del hogar (2002/96/EC). Consultar con la agencia local pertinente en cuanto a informacin y centros de reciclaje.

Battery Installation Colocacin de la pila

12

Consumer Information Informacin al consumidor

FCC Statement (United States Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.

Consult the dealer or an experienced radio/ TV technician for help.

Note: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

Nota FCC (Vlido slo en los Estados Unidos) Este equipo fue probado y cumple con los lmites de un dispositivo digital de Clase B, segn est establecido en la Parte 15 del reglamento FCC. Estos lmites estn diseados para proporcionar una proteccin razonable contra interferencia daina en una instalacin residencial. Este equipo genera, utiliza y puede radiar energa de radiofrecuencia y, si no se instala y utiliza segn lo estipulado en las instrucciones, puede causar interferencia daina a radiocomunicaciones. Sin embargo, no hay ninguna garanta de que no haya interferencia en una instalacin particular. Si este equipo llega a causar interferencia daina a la recepcin de radio o televisin, lo cual puede ser verificado encendiendo y apagando el equipo, se recomienda tomar una de las siguientes medidas para corregir el problema: Cambiar la orientacin o localizacin de la antena receptora.

Aumentar la distancia entre el equipo y el receptor.

Ponerse en contacto con el distribuidor o con un tcnico de radio/TV.

Nota: los cambios o modificaciones no expresamente autorizados por el fabricante responsable del cumplimiento de las normas puede cancelar la autoridad del usuario de usar el equipo. Este dispositivo cumple con la Parte 15 del reglamento FCC. El uso est sujeto a las dos condiciones siguientes: (1) Este dispositivo no debe causar interferencia daina y (2) este dispositivo debe aceptar

Manualsnet FAQs

If you want to find out how the Mattel Fisher Price works, you can view and download the Fisher Price Mattel Comfy Time BMM96 Bouncer Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Fisher Price Mattel as well as other Fisher Price manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Fisher Price Mattel. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Fisher Price Mattel Comfy Time BMM96 Bouncer Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Fisher Price Mattel Comfy Time BMM96 Bouncer Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Fisher Price Mattel Comfy Time BMM96 Bouncer Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Fisher Price Mattel Comfy Time BMM96 Bouncer Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Fisher Price Mattel Comfy Time BMM96 Bouncer Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.