Summary of Content for Fender 215s 071-1320-000 Subwoofer Owner's Manual PDF
Designed for the most demanding concert sound and sound contracting requirements, the cabinets multiple cavities and internal wood bracing helps eliminate side wall movement... This design results in low distortion, very high power handling and very high SPL output... Likewise, large ports on the 215s and 215sc cabinets prevent compression at high SPL due to large exit velocities...
The first is time alignment... The mid/high racks should be as close as possible to the subwoofer so the sound from the subwoofer reaches the audience at the same time as the sound from the mid/high packs... If the subwoofer is placed too far from the mid/high packs, a slight smearing of the lower bass frequencies may occur... While ideal placement for this consideration would involve stacking the mid/high pack on top of the subwoofer, this effect is quite subtle and an obvious effect may not be heard until the separation between the two cabinets is large enough to cause an audible time delay...
After the speaker system has been placed, the crossover point needs to be set for maximum bene- fit... While the 15" drivers in the 215s/215sc are fully capable of accurately reproducing frequencies above 350 Hz, the bandpass enclosure has been designed to acoustically roll off frequencies above 170 Hz... This decreases distortion levels and boosts frequencies below 170 Hz... Thus, the crossover point should be set lower than 130 Hz to ensure that all frequencies are reproduced... Setting the crossover point too low (below 80 Hz) will not take full advantage of the subwoofer because it places too high of a demand on the mid/high packs... For these reasons, a crossover point of ranging between 80 and 130 Hz is recommended depending upon the placement of the speakers...
DRIVERS Two 15" (38... 1cm) cast frame woofers 4" (10... 2 cm) voice coils 110 ounce (3... 1 kg) magnets
If you want to find out how the 215s Fender works, you can view and download the Fender 215s 071-1320-000 Subwoofer Owner's Manual on the Manualsnet website.
Yes, we have the Owner's Manual for Fender 215s as well as other Fender manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Owner's Manual should include all the details that are needed to use a Fender 215s. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Fender 215s 071-1320-000 Subwoofer Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Fender 215s 071-1320-000 Subwoofer Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Fender 215s 071-1320-000 Subwoofer Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Fender 215s 071-1320-000 Subwoofer Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Fender 215s 071-1320-000 Subwoofer Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.