Fender ST-275 Stand User Guide PDF

Download download
Fender ST-275 Stand User Guide PDF
Fender Manual Fender Stand Manual Fender ST-275 Manual Fender Stand User Guide
Pages 1
Year 0
Language(s)
English en
1 of 1
1 of 1

Summary of Content for Fender ST-275 Stand User Guide PDF

Page 1

The Passport tripod speaker stand is constructed from rugged anodized aluminum alloy tubing and is specially designed to support the Passport loudspeaker enclosures. Because loudspeaker enclosures placed on the Passport tripod speaker stand could be damaged or cause bodily harm if they fall, please read through these instructions and heed all caution and safety warnings.

IMPORTANT

When setting up your Passport tripod speaker stand, make sure it is placed on a dry, flat and secure surface. Also, when placing, raising or lowering gear on the Passport tripod speaker stand, it is recommended that at least two people undertake these procedures. THE FENDER PASSPORT TRIPOD SPEAKER STAND IS DESIGNED FOR USE WITH PASSPORT OR OTHER LIGHTWEIGHT LOUDSPEAKER ENCLOSURES. THIS STAND IS NOT RECOMMENDED FOR LOUDSPEAKERS WEIGHING IN EXCESS OF 35 lbs. (15.9 kg).

YOUR FENDER PASSPORT TRIPOD SPEAKER STAND

P/N 051733

Tighten collar handknob

1 Loosen leg fitting handknob

2

Turn tripod upside down and pivot legs out.

3

Turn tripod upright and slide leg fitting to adjust the width of the leg spread until the center pole is approximately 1/4 (64 mm) from the floor. This will ensure the Passport tripod speaker stand is at its maximum footprint (Using a smaller footprint will adversely affect the stability of the unit). Tighten the handknob.

4

Place your speaker on the stand. Remember to secure all wires coming from the Passport tripod speaker stand for reasons of both safety and good presentation (loose wires can be tripped on and give a cluttered, unprofessional appearance).

5

Loosen collar handknob and raise equipment to the desired height. Do not extend the center pole more than 36 (91.4 cm) above the locking collar support. Re-tighten handknob and check the stability of the unit at the desired height setting.

6

Manualsnet FAQs

If you want to find out how the ST-275 Fender works, you can view and download the Fender ST-275 Stand User Guide on the Manualsnet website.

Yes, we have the User Guide for Fender ST-275 as well as other Fender manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Guide should include all the details that are needed to use a Fender ST-275. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Fender ST-275 Stand User Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Fender ST-275 Stand User Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Fender ST-275 Stand User Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Fender ST-275 Stand User Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Fender ST-275 Stand User Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.