Fender Passport P10W VHF 069-1120-061 EUR 230v 169.505MHz PA System User's Guide PDF

1 of 6
1 of 6

Summary of Content for Fender Passport P10W VHF 069-1120-061 EUR 230v 169.505MHz PA System User's Guide PDF

P10W Personal Wireless Sound System

U s

e r

s

G u

i d

e

Overview of Features

(1) Molded Carry Handle

(2) 5 Full-Range Loudspeaker

(3) 1/4 (6.3mm) Input Jack. This is a mic level input jack. Use this jack to plug in a wired microphone if necessary (second mic input).

(4) Power Switch/ Wireless Mic Volume Control. A click-off position is located at the fully counter-clockwise position. Rotating the control clockwise increases the output volume of the wireless microphone.

(5) Power Indicator Light (glows red when power is on).

(6) 1/4 Input Level Control Adjusts the level of the microphone plugged into the 1/4 jack (#3).

(7) Battery Charge Indicator. - Red light indicates battery is low and needs charging. - Green, blinking indicates charging in progress. - Solid green indicates battery is fully charged.

(8) Line Out Jack. Allows you to send the audio signal from the P10W to an exter- nal amplifier, mixer or recording device.

(9) 1/8 (3.5mm) Auxiliary Input (for connecting CD, Cassette, or audio line output from another device like a computer sound card).

(10) DC Power Input Jack (plug in the battery charger here).

(11) Shoulder Strap.

(12) Battery Compartment (shoulder strap can be stored in here).

(13) Mic Stand Adapter.

Thank you for selecting the Fender Passport P10W Personal Wireless Sound System. Fenders Passport brand of products are known for their portability, ease of use, innovative design, exceptional quality and value. We think you will find the same qualities in your new P10W. Before operating the P10W, please read this instruction manual thoroughly and familiarize yourself with the features and operation of your new sound system.

Your P10W was carefully packed at the factory. The carton should con- tain: 1 - P10W Main unit 1 - AC to DC power adapter 1 - AC cord (appropriate for country where P10 was purchased) 1 - Wireless electret-condenser microphone

If any items are missing, please contact the authorized Fender retailer where you purchased the P10.

The P10W is a battery powered, wireless personal portable sound system. It is ideal for any situation where you need to raise the level of your voice (or other audio source) to effectively communicate with a group of peo- ple. The P10W is perfect for teachers, tour guides, auctioneers, presenta- tions, crowd control situations, emergency personnel, coaches, zoos, museums... anyone, anywhere.

P250) equipped with wireless receivers are set up throughout the termi- nal. As the agent announces events taking place at that gate, everyone in the terminal can also hear the information.

Using the secondary 1/4 microphone input - You must use a microphone that has a cable with a 1/4 connector. Plug

the 1/4 end of the mic cable into the 1/4 Input Jack on the P10W (#3).

- Adjust the 1/4 input level control (#6) to desired volume.

Connecting another audio source to the P10W - The 1/8 Auxiliary input jack (#7) is available to connect a CD or

Cassette player to the P10W. - Connect the devices audio output to the 1/8 Auxiliary Input on

the P10W. - Turn the Volume Control (#4) clockwise to turn on the P10W, and

adjust to desired volume.

Connecting the line output to another piece of equipment The 1/8 line output is available to send the audio signal(s) from the P10W to another piece of equipment. For example, if you want to record a presentation (or you singing!) you can connect this output jack to the input jack of a cassette recorder.

The level of the audio from this jack is adjusted with the wireless mic (main) volume control (#4).

Charging the Battery Very Important! - Before you use your P10W, you must charge the battery for at least four hours (or until the Battery Charge Indicator indicates the battery is fully charged).

The P10W has an auto turn-off protection circuit. When the battery charge is weak, the unit will automatically turn off to prevent damaging the battery. If this happens, turn off the unit and recharge the battery.

AC to DC power adapter A power adapter is supplied with your P10W. This adapter is used to recharge the battery. It is not designed to power the P10W from an AC source. Make sure the P10W is turned off when recharging the battery.

Operation

Very Important! - Before you use your P10, you must charge the bat- tery for at least four hours (or until the Battery Charge Indicator indi- cates the battery is fully charged)

Using the wireless microphone The wireless microphone runs off a 9v battery (not included). Unscrew the cylindrical end of the mic to access the battery compartment.

- Turn on the P10W - Turn on the wireless microphone - Adjust the volume control (#4) to the desired volume.

The wireless microphone included with your P10W is a high-quality microphone designed for use with voice or instruments. The receiver is built into the P10W. The transmission range (how far away you can move the microphone away from the receiver) is well over 60 feet. Keep in mind that many household and office appliances, as well as overhead flo- rescent lights, or lights on dimmer switches can cause interference with your wireless transmission. If this happens, simply move the P10W or move the microphone to an area where you receive clear transmission. In most cases, this should be no more than a few feet.

Wireless Flexibility - The Passport Way The P10W is available in two wireless frequencies - 169.505MHz and 171.905MHz. The wireless frequency of your P10W is printed on the bot- tom of the microphone and the bottom of the main unit. These same fre- quencies are available as wireless systems for other Passport products.

The output of the wireless microphone (the transmitter) is sent all around you. This means that if you had several P10Ws (all the same frequency) they would all receive the signal from your microphone. Think of it as a paging system - put P10s in every room of your house or office and when you speak into the microphone, your voice comes out of all the speakers - each with their own volume controls!

A powerful feature is that one microphone can send signals to different Passport systems. For example, an airline ticketing agent is using a P10W as a communication tool at thier gate. Larger Passport systems (P150 or

Tips on correctly using the microphone Getting good results with a microphone is largely due to proper micro- phone technique. Hold the microphone directly in front of your mouth. Picture yourself eating a lollipop. The lollipop stick is the body of the microphone. This is the proper angle you should be holding the microphone in relation to your mouth.

The distance the microphone is held away from your mouth is largely dependent on how loud you speak. It is common for performers or pre- senters to eat the mic. This is term used for someone who keeps the microphone grill in contact with their lips at all times. You will find that if you use the microphone this way, you can speak in a normal voice and be heard clearly. Speaking loudly can cause your voice to distort.

Experiment with what is most comfortable for you. Keep these few items in mind. - The closer the mic is to your mouth, the louder you will be. - The closer the mic is to your mouth, the fuller your voice will be

(this is called proximity effect where bass frequencies increase when you move closer to a microphone).

- The closer your mouth is to the microphone, the lower you can set the overall output. This lessens the opportunity for feedback to occur (that awful squealing that occurs when a microphone gets too close to a speaker).

The power adapter converts AC power to DC power. The output of the power adapter is 18V DC. (The inner section of the connector is posi- tive).

Charging the Battery Plug the barrel end of the cord into the DC power input jack (#10) and plug the AC end into your AC power source.

Charging will begin immediately and the Battery Charge Indicator (#7) will show a blinking green light.

Battery Charge Indicator. - Red light indicates battery is low and needs charging. - Green, blinking indicates charging in progress. - Solid green indicates battery is fully charged.

If the indicator does not immediately start to blink green, it may be due to excessive power drain of the battery. This is normal. The indicator should begin to blink after 10 to 15 minutes. If the battery charge indicator fails to light, it may be due to a faulty battery.

Replacing, or using a second Battery With proper care and charging, it is unlikely that it will be necessary to replace the battery in the P10W. If you plan on using the P10W for extended periods of time, you may want to purchase a second battery. The battery is a standard 12 volt 2.7 amp gel cell and is available from Fender directly, or from Authorized Fender Audio dealers. (Part number 005-7535-000).

To replace the battery: - Open the battery compartment by pressing down on the two tabs at the

top of the battery compartment. The door will hinge down. - The battery is spring loaded behind an interior rear panel. Remove

this panel by sliding it upwards. - Remove the battery by pulling it out of the compartment. Replace the

battery with another. The terminals on the battery should be on the top as you slide it into the compartment.

- Press the battery into the unit and replace the interior rear panel. - Close the compartment door. Lift up the two tabs until they click into place.

Replacement parts Replacement parts are available through your Authorized Fender Audio dealer, Service Center or from Fender Musical Instruments directly.

Wireless Microphone 169.505MHz 069-1102-001 Wireless Microphone 171.905MHz 069-1102-002 Shoulder Strap 005-7527-000 Universal Power Adapter 005-7530-000 AC Power Cord

120v 005-7531-000 230v Euro 005-7532-060 230v UK 005-7533-040 100v 005-7534-070

Rechargeable Battery 005-7535-000

Recommended Accessories (for more information go to www.fenderaudio.com)

Microphone Kit (wired mic) 069-9000-000 Executive Transmitter Kit 169.505MHz 069-1103-001 Executive Transmitter Kit 171.905MHz 069-1103-002

Includes a headset mic, a lavaliere mic, an instrument cable- all interchangeable with a belt pack transmitter (also included).

Custom Docking Wireless Receivers for Passport P150 and P250 systems (for equipping larger Passport systems with a wireless receiver on the same frequency as your P10W system).

Passport Docking Receiver 169.505MHz 069-1101-001 Passport Docking Receiver 171.905MHz 069-1101-002

Product Specifications Model Passport P10W 120v 169.505MHz 069-1120-001

120v 171.905MHz 069-1120-002 Euro 230v 169.505MHz 069-1120-061 Euro 230v 171.905MHz 069-1120-062 UK 230v 169.505MHz 069-1120-041 UK 230v 171.905MHz 069-1120-042 (only difference is AC line cord plug style)

Wireless Carrier 169.505MHz or 171.905Mhz VHF Oscillation Quartz-Controlled Max. Deviation 15 kHz Antenna Built in Sensitivity 12dBmV @ S/N > 80dB

Power Output 27 watts (RMS) THD < 1% Freq. Response 50Hz - 15kHz +/- 3dB Audio Input Built in wireless receiver, 1/4 mic, 1/8 line Speaker type 5 full-range, 4 ohm Power Supply Intelligent charger 90-260VAC input

18V DC +2.5A output (inner contact is posi tive)

Battery 12v/ 2.7amp hour rechargeable gel cell Charging Time 4 hours Operating Time Up to eight hours talk time Dimensions (In) 11.2 L x 6.3 W x 7.0 H

(mm) 285 L x 160 W x 178 H

Manualsnet FAQs

If you want to find out how the Passport P10W VHF Fender works, you can view and download the Fender Passport P10W VHF 069-1120-061 EUR 230v 169.505MHz PA System User's Guide on the Manualsnet website.

Yes, we have the User's Guide for Fender Passport P10W VHF as well as other Fender manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a Fender Passport P10W VHF. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Fender Passport P10W VHF 069-1120-061 EUR 230v 169.505MHz PA System User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Fender Passport P10W VHF 069-1120-061 EUR 230v 169.505MHz PA System User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Fender Passport P10W VHF 069-1120-061 EUR 230v 169.505MHz PA System User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Fender Passport P10W VHF 069-1120-061 EUR 230v 169.505MHz PA System User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Fender Passport P10W VHF 069-1120-061 EUR 230v 169.505MHz PA System User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.