Fender Passport P10 069-1110-060 230V EUR PA System User's Guide PDF

1 of 5
1 of 5

Summary of Content for Fender Passport P10 069-1110-060 230V EUR PA System User's Guide PDF

P10 Personal Portable Sound System

U s

e r

s

G u

i d

e

Overview of Features

(1) Molded Carry Handle

(2) 5 Full-Range Loudspeaker

(3) 1/4 (6.3mm) Input Jack (plug the male-end of the mic cable in here). This input is a mic level input.

(4) Power Switch/ Volume Control. A click-off position is located at the fully counter-clockwise position. Rotating the control clockwise increases the output volume.

(5) Power Indicator Light (glows red when power is on).

(6) Battery Charge Indicator. - Red light indicates battery is low and needs charging. - Green, blinking indicates charging in progress. - Solid green indicates battery is fully charged.

(7) 1/8 (3.5mm) Auxiliary Input (for connecting CD, Cassette, or audio line output from another device like a computer sound card).

(8) DC Power Input Jack (plug in the battery charger here).

(9) Shoulder Strap.

(10) Battery Compartment (shoulder strap can be stored in here).

(11) Mic Stand Adapter.

Thank you for selecting the Fender Passport P10 Personal Sound System. Fenders Passport brand of products are known for their portability, ease of use, innovative design, exceptional quality and value. We think you will find the same qualities in your new P10. Before operating the P10, please read this instruction manual thoroughly and familiarize yourself with the features and operation of your new sound system.

Your P10 was carefully packed at the factory. The carton should contain: 1 - P10 Main unit 1 - AC to DC power adapter 1 - AC cord (appropriate for country where P10 was purchased) 1 - Dynamic cardioid microphone 1 - 3 coil microphone cable

If any items are missing, please contact the authorized Fender retailer where you purchased the P10.

The P10 is a battery powered personal portable sound system. It is ideal for any situation where you need to raise the level of your voice (or other audio source) to effectively communicate with a group of people. The P10 is perfect for teachers, tour guides, auctioneers, presentations, crowd control situations, emergency personnel, coaches, zoos, museums... any- one, anywhere.

Charging the Battery Plug the barrel end of the cord into the DC power input jack (#) and plug the AC end into your AC power source.

Charging will begin immediately and the Battery Charge Indicator (#6) will show a blinking green light.

Battery Charge Indicator. - Red light indicates battery is low and needs charging. - Green, blinking indicates charging in progress. - Solid green indicates battery is fully charged.

If the indicator does not immediately start to blink green, it may be due to excessive power drain of the battery. This is normal. The indicator should begin to blink after 10 to 15 minutes. If the battery charge indicator fails to light, it may be due to a faulty battery.

Replacing, or using a second Battery With proper care and charging, it is unlikely that it will be necessary to replace the battery in the P10. If you plan on using the P10 for extended periods of time, you may want to purchase a second battery. The battery is a standard 12 volt 2.7 amp gel cell and is available from Fender directly, or from Authorized Fender Audio dealers. (Part number 005-7535-000).

To replace the battery: - Open the battery compartment by pressing down on the two tabs at

the top of the battery compartment. The door will hinge down. - The battery is spring loaded behind an interior rear panel. Remove

this panel by sliding it upwards. - Remove the battery by pulling it out of the compartment. Replace the

battery with another. The terminals on the battery should be on the top as you slide it into the compartment.

- Press the battery into the unit and replace the interior rear panel. - Close the compartment door. Lift up the two tabs until they click

into place.

Operation

Very Important! - Before you use your P10, you must charge the battery for at least four hours (or until the Battery Charge Indicator indicates the battery is fully charged)

Using the microphone - Plug the microphone into the XLR (3 pin) connector of the coiled

microphone cable. - Plug the 1/4 end of the coiled microphone cable into the 1/4

Input Jack on the P10 (#3 in drawing). - Turn the Volume Control (#4) clockwise to turn on the P10, and

adjust to desired volume.

Connecting another audio source to the P10 - The 1/8 Auxiliary input jack (#7) is available to connect a CD or

Cassette player to the P10. - Connect the devices audio output to the 1/8 Auxiliary Input on

the P10. - Turn the Volume Control (#4) clockwise to turn on the P10, and

adjust to desired volume.

Charging the Battery Very Important! - Before you use your P10, you must charge the bat- tery for at least four hours (or until the Battery Charge Indicator indi- cates the battery is fully charged). A single four hour charge will power the P10 for up to eight hours of continuous use.

The P10 has an auto turn-off protection circuit. When the battery charge is weak, the unit will automatically turn off to prevent damaging the bat- tery. If this happens, turn off the unit and recharge the battery.

AC to DC power adapter A power adapter is supplied with your P10. This adapter is used to recharge the battery. It is not designed to power the P10 from an AC source. Make sure the P10 is turned off when recharging the battery.

The power adapter converts AC power to DC power. The output of the power adapter is 18V DC. (The inner section of the connector is posi- tive).

Product Specifications Model Passport P10 120v part number 069-1110-000

Euro 230v part number 069-1110-060 Aust 240v part number 069-1110-030 UK 230v part number 069-1110-040

100v part number 069-1110-070 (only difference in product is AC line cord)

Power Output 27 watts (RMS) Speaker type 5 full-range, 4 ohm Power Supply Intelligent charger 90-260v AC input

18VDC +2.5A output (inner contact is posi tive)

Battery 12v/ 2.7amp hour rechargeable gel cell Charging Time 4 hours Operating Time Up to eight hours talk time Dimensions (In) 11.2 L x 6.3 W x 7.0 H

(mm) 285 L x 160 W x 178 H Weight 6.5 lbs. / 2.95 Kgs (with battery)

Replacement parts Replacement parts are available through your Authorized Fender Audio dealer, Service Center or from Fender Musical Instruments directly.

Microphone 069-9000-000 3 mic cable (coiled) 005-7529-000 Shoulder Strap 005-7527-000 Universal Power Adapter 005-7530-000 AC Power Cord

120v 005-7531-000 230v Euro 005-7532-060 230v UK 005-7533-040 100v 005-7534-070

Rechargeable Battery 005-7535-000

Be sure to register your purchase at www.fender.com

Tips on correctly using the microphone Getting good results with a microphone is largely due to proper micro- phone technique. When speaking, hold the microphone directly in front of your mouth. Picture yourself eating a lollipop. The lollipop stick is the body of the microphone. This is the proper angle you should be holding the microphone in relation to your mouth.

The distance the microphone is held away from your mouth is largely dependent on how loud you speak. It is common for performers or pre- senters to eat the mic. This is term used for someone who keeps the microphone grill in contact with their lips at all times. You will find that if you use the microphone this way, you can speak in a normal voice and be heard clearly. Speaking loudly can cause your voice to distort.

Experiment with what is most comfortable for you. Keep these few items in mind. - The closer the mic is to your mouth, the louder you will be. - The closer the mic is to your mouth, the fuller your voice will be

(this is called proximity effect where bass frequencies increase when you move closer to a microphone).

- The closer your mouth is to the microphone, the lower you can set the overall output. This lessens the opportunity for feedback to occur (that awful squealing that occurs when a microphone gets too close to a speaker).

A Product of

Fender Musical Instruments Corporation Cor

Manualsnet FAQs

If you want to find out how the Passport P10 Fender works, you can view and download the Fender Passport P10 069-1110-060 230V EUR PA System User's Guide on the Manualsnet website.

Yes, we have the User's Guide for Fender Passport P10 as well as other Fender manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a Fender Passport P10. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Fender Passport P10 069-1110-060 230V EUR PA System User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Fender Passport P10 069-1110-060 230V EUR PA System User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Fender Passport P10 069-1110-060 230V EUR PA System User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Fender Passport P10 069-1110-060 230V EUR PA System User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Fender Passport P10 069-1110-060 230V EUR PA System User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.