Fender Level Set Buffer Effects Pedal Owner's Manual PDF

1 of 8
1 of 8

Summary of Content for Fender Level Set Buffer Effects Pedal Owner's Manual PDF

LEVEL SET BUFFER

1

3

4

8

7

2 LEVEL SET BUFFER

LEVEL HI-FREQ

MUTE

LOAD

1. Mute Footswitch 2. Tuner Output Jack 3. Jewel Indicator 4. Main Output Jack 5. Level 6. Hi-Freq

7. Load Switch 8. Input Jack 9. Low Battery Indicator 10. LED Kill Switch 11. DC Power Connector

9

10

11

LEDs

9V DC INPUT

5 6

DESIGNED IN CALIFORNIA, U.S.A.

Thanks for purchasing the Level Set Buffera exible utility pedal designed especially for electric guitar and bass. The Level Set Buffer is designed to accomplish three main functions. First, it provides a separate output for a stage tuner in order to keep the signal path purer (the built-in mute footswitch also allows silent tuning). Note that the tuner output is always active, meaning that tuning can be done mid-performance without having to mute the signal (if preferred). Second, the Level and Hi-Freq controls allow output-level compensation for different instruments, enabling easier guitar swaps without having to adjust multiple settings. Third, the pedal serves as a buffer that helps maintain signal quality through multiple pedals and cables. The Level Set Buffer is designed to be placed rst in the signal chain, with other pedals following.

LEVEL SET BUFFER

Level This control offers up to 12dB of volume boost or cut, with the center position being unity gain (no level change). With the players main instrument, begin by setting this control to the center position and then dialing in the rest of the rig. Then adjust the Level control up or down as needed depending on the output level of subsequent guitars. Humbucking or active pickups may require a cut in gain (counter-clockwise) while vintage single-coil type pickups might require more gain (clockwise) to sound right.

Hi-Freq The Hi-Freq gain control behaves similarly to the Level control, except that it only affects very high frequencies. This control is designed to add a little sparkle to darker pickups, or to warm up overly bright pickups. Like the Level control, this control offers up to 12dB of boost or cut.

Load Switch The Load Switch applies capacitance to the input and loads guitar pickups in the same way that a traditional tube amp might. Note that the effect can be subtle, and the results will differ depending on (as with a tube amp) the type of pickups in use, instrument volume pot value and setting, and cables.

Jewel Indicator The jewel is illuminated when the pedal is not muted, letting players know theyre ready to rock.

Mute Footswitch This rugged footswitch mutes the main output jack, to allow for silent tuning.

Input Jack This is a high-impedance input suitable for electric guitar, bass, acoustic guitars with pickup systems, keyboards and other instruments.

Main Output Jack This is a low-impedance output jack that connects to the amp or to the next effect pedal in the signal chain.

Tuner Output Jack This jack connects to a tuners input jack.

DC Power Connector This is a standard, center-negative 9VDC jack for use with appropriate power supplies.

LED Kill Switch This switch extinguishes the LEDs that illuminate the knobsuseful in maximizing battery life when running the pedal from batteries.

Low Battery Indicator This red LED on the front of the battery door illuminates when battery voltage drops below a set threshold, indicating that the battery should be replaced soon.

Product specications subject to change without notice

Specications

IMPEDANCES: POWER SUPPLY:

POWER REQUIREMENTS:

DIMENSIONS: WEIGHT:

INPUT: 1M OUTPUT LOAD: >10k One 9V battery or 9VDC regulated adapter, 5.5 x 2.1 mm barrel connector, center negative 14mA @ 9VDC 64mA, Total Current Consumption 2.75 x 4.9 x 2.5 (95.25mm x 124.5mm x 63.5mm) .9lbs (.40kg)

A PRODUCT OF: FENDER MUSICAL INSTRUMENTS CORPORATION

CORONA, CALIFORNIA, USA

Fender is a registered trademark of FMIC.

Copyright 2018 FMIC. All rights reserved.

P/N 7713288000 - REV A

Important Safety Instructions

WARNING: To prevent damage, re or shock hazard, do not expose the unit or its AC power to rain or moisture. Do not alter the AC plug of the connected power adapter Do not drip or splash liquids on the unit. No user serviceable parts inside, refer servicing to qualied personnel only. WARNING: The unit must only be connected to a safety agency certied, regulated, power source (adapter), approved for useand compliant with applicable local and national regulatory safety requirements. Unplug the AC power adapter before cleaning the unit exterior. Use only a damp cloth for cleaning and then wait until the unit is completely dry before reconnecting it to power. Ampliers and loudspeaker systems, and ear/headphones (if equipped) are capable of producing very high sound pressure levels which may cause temporary or permanent hearing damage. Use care when setting and adjusting volume levels during use.

Languages

Manual available in Espanol, francais, Italiano, Deutch, Portugues, (Chinese) www.fender.com/support

Expanded Owners Manual

Expanded Owners Manual available at: www.fender.com/support

NOTES:

Manualsnet FAQs

If you want to find out how the Level Set Buffer Fender works, you can view and download the Fender Level Set Buffer Effects Pedal Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Fender Level Set Buffer as well as other Fender manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Fender Level Set Buffer. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Fender Level Set Buffer Effects Pedal Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Fender Level Set Buffer Effects Pedal Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Fender Level Set Buffer Effects Pedal Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Fender Level Set Buffer Effects Pedal Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Fender Level Set Buffer Effects Pedal Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.