Fender Brand X X10 237-1000-000 120V US Amplifier Safety Instructions PDF
Summary of Content for Fender Brand X X10 237-1000-000 120V US Amplifier Safety Instructions PDF
A. INPUT - Connection for instrument. B. VOLUME - Controls overall volume of sound output.
For "clean" sound, set VOLUME from 1 to 5. For "natural distortion," set VOLUME from 5 to 10. Adjust VOLUME to desired level.
C. CLEAN/DRIVE SWITCH Enables overdrive sound. D. TREBLE - Provides high frequency equalization as desired. E. BASS - Provides bass frequency equalization as desired. F. HEADPHONE JACK - Used to connect stereo headphones.
Automatically silences the internal speaker. G. POWER ON LED - When illuminated, the amplifier is receiving AC POWER. H. POWER SWITCH - Turns amplifier On and Off.
Type: PR 367 Part Number: 120V US: 237-1000-000 230V EU: 237-1006-900 Power Output: 10 Watts into 4 Ohms Power Requirement: 120V AC, 60Hz, 28 Watts 230V AC, 50Hz, 28 Watts Dimensions: Width: 26cm (10.24")
Height: 26.5 cm (10.5") Depth: 14.5 cm (5.7")
Weight: 4.2kg (9.26 Ibs.)
Important Safety Instructions
This symbol warns the user of dangerous voltage levels localized within the enclosure.
This symbol advises the user to read all accompanying literature for safe operation of the unit.
Read, retain, and follow all instructions. Heed all warnings.
Only connect the power supply cord to an earth grounded AC receptacle in accordance with the voltage and frequency ratings listed under INPUT POWER on the rear panel of this product.
WARNING: To prevent damage, fire, or shock hazard, do not expose this unit to rain or moisture.
Unplug the power supply cord before cleaning the unit exterior (use a damp cloth only). Wait until the unit is completely dry before reconnecting it to power.
Maintain at least 6 inches (15.24 cm) of unobstructed air space behind the unit to allow for proper ventilation and cooling of the unit.
This product should be located away from heat sources such as radiators, heat registers, or other products that produce heat.
This product may be equipped with a polarized plug (one blade wider than the other). This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician to replace your obsolete outlet. Do not defeat the safety purpose of this plug.
Protect the power supply cord from being pinched or abraded.
This product should only be used with a cart or stand that is recommended by the manufacturer.
The power supply cord of this product should be unplugged from the outlet when left unused for a long period of time, or during electrical storms.
This product should be serviced by qualified service personnel when: the power supply cord or the plug has been damaged; or objects have fallen or liquid has been spilled onto the product; or the product has been exposed to rain; or the product does not appear to operate normally or exhibits a marked change in performance; or the product has been dropped, or the enclosure damaged.
Do not drip nor splash liquids, nor place liquid filled containers on the unit.
CAUTION: No user serviceable parts inside; refer servicing to qualified personnel only.
BRAND X amplifiers are capable of producing very high sound pressure levels which may cause temporary or permanent hearing damage. Use care when setting and adjusting volume levels during use.
a product of FMIC, Scottsdale AZ 85250 USA
Product features and specifications subject to change without notice.
AMPLIFIER 1-YEAR LIMITED WARRANTY FMIC warrants that the Brand XTM amplifier you have purchased shall be free of any defects in parts and workmanship if used under normal operating conditions for a period of ONE (1) YEAR from the date of purchase. This warranty shall apply only to the original purchaser. PLEASE RETAIN YOUR SALES RECEIPT, AS IT IS YOUR PROOF OF PURCHASE COVERING YOUR LIMITED WARRANTY. THIS WARRANTY IS VOID WITHOUT SUCH PROOF OF PURCHASE. Defective amplifiers will be repaired or replaced without charge, at FMIC's discretion, with a like or comparable product by the Dealer if presented with proof of purchase to the Authorized Brand XTM Dealer from whom the amplifier was purchased. Any repair or service performed by any person or entity other than FMIC is not covered by this limited warranty. TRANSPORTATION COSTS ARE NOT INCLUDED IN THIS WARRANTY. This limited warranty becomes void if the product has been damaged by alteration, misuse, accident, or neglect; or the product has been repaired or serviced by persons not authorized by FMIC. THE FOREGOING CONSTITUTES THE ONLY WARRANTY MADE BY FMIC WITH RESPECT TO THE PRODUCT AND IS MADE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED. Any implied warranties, including without limitation, any implied warranties of merchantability or fitness for any particular purpose, imposed under state law are limited to the duration of this limited warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not be applicable to you. FMIC ASSUMES NO LIABILITY FOR PROPERTY DAMAGE RESULTING FROM FAILURE OF THIS PRODUCT NOR ANY LOSS OF INCOME, SATISFACTION OR DAMAGES ARISING FROM THE LOSS OF USE OF SAME DUE TO DEFECTS OR AVAILABILITY OF SAME DURING SERVICE. *This warranty applies only to Brand XTM amplifier purchased and serviced within the U.S.A. and Canada. Warranties outside these countries are as defined by the authorized Brand XTM Distributor for your country or region, and may vary from the above in terms and/or length. EFFECTIVE DATE: JULY 1, 2003 FMIC 8860 EAST CHAPARRAL ROAD - SUITE 100 SCOTTSDALE, ARIZONA 85250-2618 - USA Phone: 480-59
If you want to find out how the Brand X Fender works, you can view and download the Fender Brand X X10 237-1000-000 120V US Amplifier Safety Instructions on the Manualsnet website.
Yes, we have the Safety Instructions for Fender Brand X as well as other Fender manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Safety Instructions should include all the details that are needed to use a Fender Brand X. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Fender Brand X X10 237-1000-000 120V US Amplifier Safety Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Fender Brand X X10 237-1000-000 120V US Amplifier Safety Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Fender Brand X X10 237-1000-000 120V US Amplifier Safety Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Fender Brand X X10 237-1000-000 120V US Amplifier Safety Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Fender Brand X X10 237-1000-000 120V US Amplifier Safety Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.