Fender Prosonic Combo 021-1037-200 240V AUS NZ Amplifier Owner's Manual PDF

1 of 11
1 of 11

Summary of Content for Fender Prosonic Combo 021-1037-200 240V AUS NZ Amplifier Owner's Manual PDF

P/N 049991

Reference and Owner's Manual

Professional Tube Amplifier

t o n e - t r a d i t i o n - i n n o v a t i o n

THE FENDER HERITAGE

Since 1946, Fender realized the importance of your amplifier. You see, your amplifier is more than a combination

of dials, wires and speakers. Your amplifier IS a musical instrument. And like any fine musical instrument, it

should be treated with special care and attention to detail.

At Fender, we know what building amplifiers is all about. For over half a century, we have been designing and

producing some of the worlds best amplifiers helping shape the face of music. In fact, many of the world's most

classic and best sounding amplifiers have proudly worn the Fender name.

Whether you're after that classic Fender tone, a clean crisp sound for your Bass or Keyboard or the raw driving

power of modern distortion, your decision to purchase a Fender amplifier is one you will appreciate with each

passing note for years to come.

Wishing you years of enjoyment and a heartfelt thank you.

F e n d e r - T r a d i t i o n

Bill Schultz Chairman Fender Musical Instruments Corporation

Bill Schultz

Designed for the discriminating musician, Fender Professional Tube Amplifiers cater to the artist who appreciates

the full-bodied, rich tones that only tube amplifiers can create. Professional Tube Amplifiers combine that classic

Fender sound with a perfect touch of modern, "real world" player conveniences.

Fender Professional Tube Amplifiers feature welded, all-steel chassis capable of handling the most extreme condi-

tions. Covered in genuine Tolex for long life and lasting good looks, our cabinets are constructed from premium, hand-

selected birch/maple plywood and employ rugged corner joinery. Only the most road-worthy and musical components

are used in the all-tube circuitry. This and much more enables each amplifier to withstand the most demanding perfor-

mance situations, day in and day out. And last, but certainly not least, Fender's classic all-tube reverb adds that touch

of depth and tone that has kept guitarists smiling for generations.

Professional gear for the professional musician. The serious amplifier choice is Fender. So whether you

want your blues to "cry like a baby" or your heavy metal leads to "scream like a madman", Fender has a Professional

Tube Amplifier for you.

F e n d e r - T o n e

THE FENDER PROFESSIONAL TUBE AMPLIFIER SERIES

PROSONIC REFERENCE AND OWNER'S MANUAL INTRODUCTION

Congratulations on your purchase of a Fender Prosonic Professional Tube Amplifier. The Prosonic is a unique amplifier

offering endless possibilities and numerous features, setting it apart from any other amplifier. Each Prosonic amplifier is

individually hand-crafted from the finest components at our Fender amplifier factory in Lake Oswego, Oregon, USA.

The All-Tube Prosonic is available in 2 models, the 2-10 speaker Combo with Reverb and the Prosonic Head amplifier.

Both versions feature a 3-way bias/rectifier switch, allowing the player a choice between class A cathode bias, class AB

grid bias, as well as the sounds of both tube and solid state rectifiers. The Prosonic is rated at 60 Watts R.M.S. and

includes, among its many features, 2 gain controls. Gain 1 functions as a standard gain stage whereas Gain 2 functions

similar to a compressor, adding sustain while reducing Edge when the volume is increased. This channel produces

great high gain sound at any volume - from bedroom to stadium.

The Prosonic combo is designed for the guitarist who requires a portable, medium powered amplifier with reverb capable of

producing tones ranging from the crystal clean to a super gain crunch. Equipped with 2 channels, the Prosonic combo

offers the flexibility of accessing each channel via the front panel A/B switch or the two button footswitch (provided).

The Prosonic head is designed for the guitarist who requires a medium Wattage head with a wide variety of great tones.

Like the Prosonic combo, the Prosonic head features 2 channels with the flexibility of accessing each channel via the front

panel A/B switch or the footswitch (also enclosed).

In order to thoroughly understand the operation, features and functions of your amplifier, please read and refer, as need-

ed, to this operation manual. By doing so, your amplifier is sure to provide you with years of trouble-free music making

and maximum playing enjoyment.

F e n d e r - I n n o v a t i o n

ELEVATOR ROCK

IN YOUR FACE

NOSTRIL LEAD

CLASSIC FENDER

COWBOY TWANG

METAL

SUGGESTED PROSONIC SOUND SETTINGS - You Take it from Here

N/AN/ATO TASTE N/A

TO TASTE N/A N/A N/A

N/A

N/A

N/A

N/A

TO TASTE

TO TASTE TO TASTE

TO TASTE

TO TASTE

A. INPUTS - Input 1 is the main guitar input for the Prosonic. Input 2 is a -3dB (low sensitivity) input for the

Prosonic.

B. NORMAL/DRIVE - Allows front panel selection of the NORMAL (Vintage sound) or DRIVE (Hi Gain).

SPECIAL NOTE: This switch is deactivated by plugging in the footswitch

C. VOLUME - Controls the volume level of the NORMAL channel ONLY.

D. GAIN 1 - 1st control for gain or overdrive of the DRIVE channel ONLY.

E. LED -Indicates operation of the DRIVE channel.

F. GAIN 2 - 2nd control for gain or overdrive. This acts much like a compressor when turned up. Operates

in the DRIVE channel ONLY. The gain channel will still operate with Gain 2 set at zero.

PROSONIC FRONT PANEL FUNCTIONS

A A B C D FE G H

G. TREBLE - Adjusts the overall brightness of the amplifier.

H. BASS - Adjusts the low frequencies of the amplifier.

I. MID - Adjusts the midrange frequencies of the amplifier.

J. MASTER- Controls the loudness of the DRIVE channel ONLY.

K. REVERB- (Combo only) Controls the strength of the Reverb (both channels). This effect may be selected

on or off via the footswitch.

L. PILOT JEWEL - Illuminated when the Prosonic is receiving power. If the lamp burns out, unplug the

amplifier, unscrew the green jewel and replace the lamp with a type T47 light bulb.

I J K L

A. LINE CORD - Your amplifier is equipped with a 3-prong, grounding type supply cord designed to reduce the possibility of shock due to electrical fault. Be sure to connect the cord to a grounded receptacle. DO NOT ALTER THE AC PLUG!

B. POWER SWITCH - Turns the AC POWER on and off. When this switch is in the OFF position the amplifier is completely shut down.

C. FUSE - The fuse, located in the AC supply of the amplifier, helps protect the amplifier in the event of an electrical fault or tube failure. If the fuse blows, replace it with one of the same type and rating. NEVER use a fuse of a higher current rating. Doing so could severely damage the unit and present a serious safety hazard. If the amplifier repeatedly blows fuses, take it to an authorized Fender warranty service center.

D. STANDBY SWITCH - Toggles between the operate and stand-by mode. When the switch is in the stand-by mode, no sound will be heard. Power, however, is still supplied to the tube filaments to keep them warmed and the unit ready to play. Using this switch during short breaks will help increase tube life. A good rule of thumb is wait at least 50 seconds after the power switch is on, before turning on the standby switch.

E. RECTIFIER/BIAS SWITCH - Allows for the selection of Rectifier sounds and bias classes to best suit your playing style. (Experiment until you find a preferred setting). The Class A/TUBE setting at low volume sounds a lot like the Class AB2/Solid State setting at high volume.

F. IMPEDANCE SWITCH- (Head only) Labeled 4, 8 and 16. This switch serves to set the output impedance of the amplifi- er to best match the speaker impedance for maximum power and tube life.

G. SPEAKER (Combo), SPEAKER 1 (Head) - Input connection for speakers. This jack is the primary connection for speakers.

H. EXTERNAL SPEAKER (Combo), SPEAKER 2 (Head) - Input connection for an external speaker. This jack is ONLY used in conjunction with the main SPEAKER JACK. If the EXTERNAL SPEAKER JACK is used without a cord / speaker plugged into the main SPEAKER JACK, there will be no sound. Using this jack on the Combo automatically switches the amplifier impedance to 8.

I. FOOTSWITCH JACK - Input connection for the footswitch. The footswitch allows remote switching from CHANNEL A (normal) to CHANNEL B (drive), as well as, on and off for the REVERB on the Combo unit ONLY. The Head amplifier footswitch has a single button ONLY.

J. EFFECTS RETURN - Input jack or Return from effects device(s). Inserting a cord here automatically disconnects the internal connection from the pre-amp and power connection.

K. EFFECTS SEND - Output jack for Send to effects device(s). This jack can also be used as a line out.

L. CHANNEL SWITCH - Allows the remote switching from CHANNEL A (normal) to CHANNEL B (drive).

M. REVERB SWITCH (Combo only) - Allows the remote switching of the reverb effect.

PROSONIC REAR PANEL FUNCTIONS

VI B

C H A

L M

B EC D F G H I J KA FOOTSWITCH

TUBES

Prosonic Combo The Prosonic Combo's tube complement consists of 1 pair of Fender special design 5881/6L6WGCs (part #099-5090), 5 Fender special design 12AX7As (part #099-5091), 1 special design 12AT7 (part #099-5092) and 1 5AR4/GZ34 (part # 099-5097).

Prosonic Head The Prosonic Head's tube complement consists of 1 pair of Fender special design 5881/6L6WGCs (part # 099-5090), 4 Fender special design 12AX7As (part #099-5091) and 1 5AR4/GZ34 (part #099-5097).

Tube Replacement Tube life varies with playing style and application with power tubes having a much shorter life than pre-amp tubes - which can last for years. For continued optimum performance from your amplifier, the tubes should ONLY be replaced with the same type tubes as specified on the tube location label inside the cabinet.

A simple way to check if the tubes are worn is to replace the set in your amp with your spare set. (You do carry spare tubes and fuses, don't you?)

- First, replace the OUTPUT tubes in the amplifier and listen. - Next, re-insert the original output tubes. Replace the PRE-AMP tubes and listen. - Finally, try replacing both the OUTPUT and PRE-AMP tubes and listen.

If there is a marked improvement in the tone of your amp at any point in this procedure, leave the new tubes in your amp and purchase another spare set.

When changing the tubes, ALWAYS unplug the amplifier and remember THE TUBES ARE HOT! Either wait for the tubes to cool or use an insulated oven mitt to remove them from your amplifier.

COVERING CARE

To clean the Tolex covering, use a sponge and a light soapy water solution. (Do not use flammables). ALWAYS unplug the amplifier before cleaning or approaching it with fluids. Avoid spilling liquids on operating surfaces, grill cloths, controls, switches and speakers.

TROUBLESHOOTERS CHECKLIST

If the amp is set up but does not function, check the following items

-Is the amp power cord properly plugged into an electrical outlet? -Is there power to the outlet? -Is the fuse blown? -Is the speaker(s) properly connected to the amplifier? -Is the amp on standby? -Is the Rectifier tube lighting? Try switching to the solid-state rectifier (Position 3) -Are the amplifier VOLUME, TREBLE, MID and BASS controls above 0? -Is the instrument volume control turned up? -Is the A/B switch selecting the proper channel? (Try Both volume controls). -Is the instrument plugged into the amplifier? (Eliminate any effects pedals and try another guitar cord.)

Check under all tube covers to see that the tube filaments are glowing.

If, after checking all of the above, your amplifier is not performing correctly, consult your authorized Fender service center.

PROSONIC SPECIFICATIONS

PART NUMBER- COMBO: 021-1077-x00 (100V) 021-1007-x00 (120V) 021-1047-x00 (230V) UK 021-1067-x00 (230V) 021-1037-x00 (240V) AUSTRALIA / NZ 021-1087-x00 (230V) SCANDINAVIA

SPEAKER ENCLOSURE: 2-10 Custom Design Celestion speakers

PART NUMBER- HEAD: 021-2077-x00 (100V) 021-2007-x00 (120V) 021-2047-x00 (230V) UK 021-2067-x00 (230V) 021-2037-x00 (240V) AUSTRALIA / NZ

For x 1 = RED, 2 = GREEN, 0 = BLACK (Combo Only)

COMPANION SPEAKER ENCLOSURE: 4 12 Celestion Vintage 30 speakers

021-3001-100 (RED) 021-3001-200 (GREEN) 021-3001-000 (BLACK)

POWER OUTPUT: Class AB2, Solid state rectifier,- 60 W R.M.S. Class AB2, 5AR4/GZ34 rectifier- 50 W R.M.S. Class A, 5AR4/GZ34 rectifier- 30 W R.M.S. minimum into 8 or 16

OUTPUT IMPEDANCE: 8 or 16 (Combo), 4, 8 or 16, (Head).

INPUT IMPEDANCE: 1 M

POWER REQUIREMENTS: 100-120V AC, 50-60 Hz, 360W. 230-240V AC, 50 Hz, 360W.

FUSE TYPE: 100-120V version T3 Amp 250V 230-240V version T1.6 Amp 250V

DIMENSIONS: COMBO HEAD

HEIGHT: 18.5 in / 47 cm 9 in / 23 cm WIDTH: 24 in / 61 cm 24 in / 61 cm DEPTH: 10.5 in / 26.5 cm 9.5 in / 24 cm WEIGHT: 48 lbs / 22 kg 42 lbs / 19 kg

SOUND: VERSATILE AND VOLUPTUOUS

WARNING: No user serviceable parts inside, refer servicing to qualified personnel only. THIS EQUIPMENT MUST BE EARTH GROUNDED.

THIS EQUIPMENT CONFORMS TO THE FOLLOWING DIRECTIVES : EMC 89/336/EEC AND LV 73/23/EEC

Our manuals are intended to be a reference source throughout the lifetime of

Manualsnet FAQs

If you want to find out how the Prosonic Combo Fender works, you can view and download the Fender Prosonic Combo 021-1037-200 240V AUS NZ Amplifier Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Fender Prosonic Combo as well as other Fender manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Fender Prosonic Combo. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Fender Prosonic Combo 021-1037-200 240V AUS NZ Amplifier Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Fender Prosonic Combo 021-1037-200 240V AUS NZ Amplifier Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Fender Prosonic Combo 021-1037-200 240V AUS NZ Amplifier Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Fender Prosonic Combo 021-1037-200 240V AUS NZ Amplifier Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Fender Prosonic Combo 021-1037-200 240V AUS NZ Amplifier Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.