Contents

Ezviz T3C Europe Speaker User Manual PDF

1 of 7
1 of 7

Summary of Content for Ezviz T3C Europe Speaker User Manual PDF

COPYRIGHT Hangzhou EZVIZ Software Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as EZVIZ). This user manual (hereinafter referred to as the Manual) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make any warranties, guarantees or representations, express or implied, regarding to the Manual. About this Manual The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the website (http://www.ezviz.com). Revision Record New release January, 2022 Trademarks Acknowledgement

, , and other EZVIZs trademarks and logos are the properties of EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners. Legal Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED AS IS, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZS TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT. EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTYS PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG OTHERS. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER PREVAILS.

Table of Contents

Overview 1 1 Package Contents 1 2 Basics 1

Get the EZVIZ App 2

Preparations 2 1 Remove Cover 2 2 Remove Insulation Strip 2

Add Device 3 1 Method One: Add by Scanning QR Code 3 2 Method Two: Add by the Gateway 3

Installation 4 1 Put on the table 4 2 Stick at Where You Want 4

Operations on the EZVIZ App 5 1 Homepage 5 2 Settings5

1

Overview

1 Package Contents

Smart Button (x1) Double-sided Tape (x2)

Pin (x1) Regulatory Information

(x1) Quick Start Guide (x1)

The device appearance is subject to the actual one you have bought. The pin is only supplied for the device with reset hole.

2 Basics

Button

Cover Detaching Convex Cover Detaching Groove

Antiskid Ring

Front Back

RESET Hole

Insulation Strip

Battery

LED Indicator

RESET Button

Insulation Strip Battery LED Indicator

Structure1(with reset hole) Structure 2(with reset button)

Name Description

Button Press the button once, twice or press and hold the button, the custom operations or scenes on the app can be performed.

RESET Hole (RESETButton)

Use the pin to press and hold the RESET hole for 2s (If your device has a reset button, please press and hold the RESET button for over 5s), the smart button will restart and then enter device adding mode.

2

LED Indicator

Fast-flashing Blue: Enters device adding mode. Fast-flashing Blue and then off: Added to the Gateway

successfully. Fast-flashing Blue and then off in 180 seconds: Failed to be

added to the gateway.

Get the EZVIZ App

1. Connect your mobile phone to Wi-Fi (suggested). 2. Download and install the EZVIZ app by searching for EZVIZ in the App Store or Google PlayTM. 3. Launch the app and register an EZVIZ user account.

EZVIZ App

If you have already used the app, please make sure that it is the latest version. To find out if an update is available, go to the app store and search for "EZVIZ".

Preparations

1 Remove Cover Remove the cover of the smart button by turning the antiskid r ing counterclockwise as shown in the figure below.

2 Remove Insulation Strip Remove the battery insulation strip as shown in the figure below.

Insulation Strip Insulation Strip

Structure 1(with reset hole) Structure 2(with reset button)

If you need to replace the battery, please purchase one CR2032 210mAh. When replacing batteries, please insert with the positive side facing up. Keep your hands dry and clean when touching the circuit board.

3

Add Device

The smart button should be used along with EZVIZ Zigbee Smart Gateway (afterinafter referred to as "gateway"). Please add gateway to the EZVIZ Cloud by referring to the gateway user manual, and then add the smart button to the gateway.

1 Method One: Add by Scanning QR Code 1. Log in to your account through EZVIZ app, tap the device adding icon and then the QR code scanning interface will be displayed.

2. Scan the QR code on the user manual, and then add the smart button to the gateway.

Scan QR Code

3. Add the smart button to the gateway by following the wizard on the app.

4. Align the cover detaching convex with the cover detaching groove as shown in the figure below. Rotate the cover clockwise to tighten cover.

2 Method Two: Add by the Gateway When adding smart button by the gateway, place the smart button as close to the gateway as possible.

1. Make the gateway enter device adding mode as instructed by the user manual of the gateway

2. Use the pin to press and hold the RESET hole for 2s (If your smart button has a reset button instead of the reset hole, please press and hold the reset button for 5s) until the indicator on the smart button turns fast-flashing blue, and the smart button enters adding mode.

3. The smart button will be added to the gateway automatically.

4. Align the cover detaching convex with the cover detaching groove as shown in the figure below. Rotate the cover clockwise to tighten the cover.

4

Installation

The smart button can be put on the table, or be sticked on where you want through the double-sided tape on the cover of the smart button.

When choose wall mount, please mount the device on the wall below 1.5 meters.

1 Put on the table

Fig 1 Put on the table

2 Stick at Where You Want

Fig 2 Stick at where you want

5

Do not install the smart button on metal doors because metal will cause signal attenuation. You can install it on walls beside metal doors.

It is recommended that the distance between the smart button and gateway be less than 20m. If there are walls between them, the number of walls should be no more than 2.

Before sticking the smart button, clean the dust on the surface first. Do not stick the smart button on limewashed walls.

Operations on the EZVIZ App

The app interface may be different due to version update, and the interface of the app you installed on your phone shall prevail.

1 Homepage Launch the EZVIZ app, open the homepage of the related gateway, you can manage your detector as needed on the page.

Log Detection log of the detector.

2 Settings

Parameter Description Device Name Customize the name of your device. Emergency Button When enabled, the device will switch to emergency call

mode and the original arm an

Manualsnet FAQs

If you want to find out how the Europe Ezviz works, you can view and download the Ezviz T3C Europe Speaker User Manual on the Manualsnet website.

Yes, we have the User Manual for Ezviz Europe as well as other Ezviz manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Ezviz Europe. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Ezviz T3C Europe Speaker User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Ezviz T3C Europe Speaker User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Ezviz T3C Europe Speaker User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Ezviz T3C Europe Speaker User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Ezviz T3C Europe Speaker User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.