Contents

Ezviz T2C America V1.0.0 Sensor User Manual PDF

1 of 7
1 of 7

Summary of Content for Ezviz T2C America V1.0.0 Sensor User Manual PDF

COPYRIGHT Hangzhou EZVIZ Software Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as EZVIZ). This user manual (hereinafter referred to as the Manual) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make any warranties, guarantees or representations, express or implied, regarding to the Manual. About this Manual The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the website (http://www.ezvizlife.com). Revision Record New release January, 2021 Trademarks Acknowledgement

, , and other EZVIZs trademarks and logos are the properties of EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners. Legal Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED AS IS, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZS TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT. EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTYS PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG OTHERS. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER PREVAILS.

Table of Contents

Overview 1 1 Package Contents 1 2 Basics 1

Get the EZVIZ App 1

Preparations 2 1 Detach Cover 2 2 Remove Insulation Strip 2

Add Device 3 1 Method One: Add by Scanning QR Code 3 2 Method Two: Add by the Gateway 3

Installation 4

Operations on the EZVIZ App 5 1 Homepage 5 2 Settings5

1

Overview 1 Package Contents

Open/Close Sensor Double-sided Tape

Regulatory Information Quick Start Guide

2 Basics

Detector

Magnet

RESET Button

LED Indicator

Name Description

RESET Button Press and hold the button for over 5s to make the sensor enter device adding mode.

LED Indicator Fast-flashingBlue:Sensorentersdeviceaddingmode. Fast-flashingBlueOnce: Door opening/closing signals triggered.

Get the EZVIZ App

1. Connect your mobile phone to Wi-Fi (suggested). 2. Download and install the EZVIZ app by searching for EZVIZ in the App Store or Google PlayTM. 3. Launch the app and register an EZVIZ user account.

2

EZVIZ App

Ifyouhavealreadyusedtheapp,pleasemakesurethatitisthelatestversion.Tofind out if an update is available, go to the app store and search for "EZVIZ".

Preparations

1 Detach Cover Detach the cover of the sensor at the detaching groove.

Detaching Groove

Cover

2 Remove Insulation Strip Removethebatteryinsulationstripasinstructedinthefigurebelow.

Insulation Strip

Battery

Whenthebatterylevelislow,thelowbatterynotificationwillbepushedtothe EZVIZ app to remind you to replace batteries.

If you need to replace batteries, please purchase two CR1632 batteries. When replacing batteries, please insert with the positive side facing up. Keep your hands dry and clean when touching the circuit board.

3

Add Device

The open/close sensor should be used along with EZVIZ Smart Gateway (afterinafter referred to as "gateway"). Please add the gateway to the EZVIZ Cloud, and then add the sensor to the gateway by the following two methods.

1 Method One: Add by Scanning QR Code 1. Log in to your account through EZVIZ app, tap the device adding icon and then the QR code scanning interface will be displayed.

2. Scan the QR code on the inner side of the cover or on the user manual, and then add the sensor to the gateway.

Scan QR Code

3.Placethesensorasdisplayedinthefigurebelow.

4. Place the cover back.

2 Method Two: Add by the Gateway

When adding sensor by the gateway, place the sensor as close to the gateway as possible.

1. Make the gateway enter device adding mode as instructed by the user manual of the gateway

2. Press and hold the RESET button for over 5 seconds until the indicator on thesensorflashesrapidlyblue,andthenthesensorwillenteraddingmode.

3. The sensor will be added to the gateway automatically.

4

Installation Thesensormustbeplacedawayfrommagneticfield,andwhendoorsorwindowsare

closed, the distance between the sensor and the magnet should be less than 20mm. Beforestickingthesensor,cleanthedustonthesurfaceofthedoororwindowfirst.Do

not stick the sensor on limewashed walls. The installation instruction grooves on the sensor and magnet should be placed together andaligned(asdisplayedinthefigurebelow).

The installation height does not exceed 1.8m. The working temperature range of the sensor is -10C~55C.

1. Select a place where the sensor can be installled.

2. Fix the sensor on the place you have selected by the double-sided tape.

3. Press the sensor for about 20 seconds.

<20mm

Installation Instruction Groove

5

Operations on the EZVIZ App

The app interface may be different due to version update, and the interface of the app you installed on your phone shall prevail.

1 Homepage Launch the EZVIZ app, open the homepage of the related gateway, you can manage your detector as needed on the page.

Log Detection log of the detector.

Dismiss Clear alarms of the detector.

2 Settings

Parameter Description Device Name Customize the name of your device. Alarm Settings When enabled, a warning will be issued if the door contact

is triggered. Youcansetthenotificationparametersasneeded.

Linkage Camera Select your camera to connect to the detector. Once connected, the camera will turn to the place when the detector is opened or closed.

Related Devices You can see the gateway connected to your detector. Device Information You can see the device information here. Share Share your device. Delete Devic

Manualsnet FAQs

If you want to find out how the America Ezviz works, you can view and download the Ezviz T2C America V1.0.0 Sensor User Manual on the Manualsnet website.

Yes, we have the User Manual for Ezviz America as well as other Ezviz manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Ezviz America. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Ezviz T2C America V1.0.0 Sensor User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Ezviz T2C America V1.0.0 Sensor User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Ezviz T2C America V1.0.0 Sensor User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Ezviz T2C America V1.0.0 Sensor User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Ezviz T2C America V1.0.0 Sensor User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.